Driver Conexant SmartAudio HD (CX20722) problems

Similar Questions

• G60-530US downgrade to Windows XP, problem of driver Conexant Pebble high definition SmartAudio

  Downgrade just that my laptop HP G60-530US of Win7 for XP, but has found 2 material may not correctly installed.

  1 Conexant Pebble high Defeinition SmartAudio

  2. HDAUDIO Soft Data Fax Modem with SmartCP

  Another topic in this forum followed instructions, still can not install the driver correctly

  Looks like all discussions on Conexant audio driver is called "Conexant SmartAudio 221" Defeinition High

  But one of my laptop is called "Conexant Pebble", chip model may be different.

  Try to find the driver for "Conexant Pebble", is http://www.driverlibrary.org/download/Conexant-Pebble-High-Definition-SmartAudio_1.html

  That can be installed and the system show the name exactly the same as in Win7, but still no sound. Everything in the Panel-online sounds and Audtio device is grey.

  Can anyone help?? Thank you!!!

  Message edited by AllenX on 10/29/2009 12:37 AM
  Message edited by AllenX on 10/29/2009 12:37 AM

  Thank you to stop any problem of compensation.

  I'm not sure I can solve interrupt the question like her need more knowledge in material conexant detail of pebbles.

  However, try the file attachment below to solve problem of external mic, I changed the post according to 3.65.1.0.

  I hope that the question of the external microphone can be attached.

  Try playing with the mic setting in smartaudio II, amp microphone and try to toggle audio enhancement.

• Driver problem card his laptop (Conexant SmartAudio HD in Windows 7)

  Sounds would be cut off from speakers during the all songs/games/video in window still detect outputs sound. It can be 'fixed' temporary and very briefly (few minutes) by plugging headphones in and out or taken AND oddly, switch between playback and recording tab under Sound.
  Everything works well for the headphones. There is no problem hearing sounds using them.
  Troubleshooting with audio playback can not detect any problem. No sign of failure of the drivers in Device Manager.
  I tried to uninstall and reinstall the audio driver with reboot and stops, even completely uninstall and switches of window on Audio device high definition. Interestingly, the temporary above "fixes" would not work for High Definition Audio device after that, the sounds get cut. He would remain at the stage of the detecting-sound-output-but-no-sound-from-speaker until I restart. So for now, I reinstalled Conexant SmartAudio HD.
  I tried to restore to the point previous and also uninstall recently installed the software but the problem persists.
  Would appreciate any thoughts on this problem.

  same problem happens to me... but for some reason, when I have the laptop on a cooling sound support not stops more... I think it's just the material overheating so it needs a little more than a fan group

• Could not save the sound in windows 7 64 bit with Conexant Smartaudio HD

  Facing problem in sound recording & speech recognition in my laptop installed with Windows 7 Home Premium (64-bit).

  Audio by default in my portable device is HD(Driver version 8.54.0.53; date 18-02-2011) Conexant Smartaudio.
  The system is not able to any sound during recording. Verified that the microphone is not muted

  Hello

  It gives you no specific error message?

  If I had the same problem, I tried the methods to solve the problem.

  Method 1:

  I suggest you try to use the Audio playback problems troubleshooting to solve the problem. Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method2:

  I suggest you to update the driver on the manufacturer's Web site.

  See the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-75899-1

   

  See also the link below:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  If this problem persists please post us. We will provide you with additional options that you can use to get the problem resolved.

• Conexant SmartAudio on Thinkpad X 200 (and other) = no table mixer? !!

  On my old T43, I can control
  (1) what reading includes, in particular, if I want the microphone of entry to be read through speakers
  (2) what registration, including if I want everything that feeds the speakers to record.

  But I can't input microphone playback through speakers now on X 200 with Conexant, / I can NOT save anything other than the flood in the microphone wave. It makes no sense to me. With built in camera/microphone/portability, I would hope an X 200 can be used for, for example, record the voices on a network conference / Skype call, just like a T43 or any other old books did.

  Any help is appreciated! Why the Thinkpad would introduce this annoying surprise...

  This is observed on the Thinkpad X 200 with Conexant SmartAudio + Vista, but it seems that he existed on other machines with the same sound card.

  http://forums.CNET.com/5208-7587_102-0.html?forumid=69&ThreadId=295951&MessageID=2801583

  http://Club.VAIO.Sony.co.UK/clubvaio/GB/en/Forum/viewthread?thread=42625

  An ugly workaround solution: http://forums11.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=1269159

  A complete follow-up of the question for the other persons concerned by the problem.
  http://Forum.ThinkPads.com/viewtopic.php?t=52527&highlight=stereomix a sum - up official but not so useful: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70822&selectarea=SUPPORT&tempsel...

• 4.8.0.0Update1214 driver Conexant Audio Driver for Windows Vista

  Who has already install vista 64-bit can tell me what this driver for vista 64-bit?

  Update driver Conexant Audio Driver for Windows Vista 4.8.0.0 1214

  I put t know exactly if it of true but some P100 camera supports the audio chip Conexant CX20551-22.
  If you are looking for the Vista 64 bit driver you must search for the driver that supports this chip.

• Satellite M40X driver PCI Device and NetworkController problem.

  Hello..

  I formatted my German original OS version for the English version. I downloaded all the drivers from the toshiba site and installed. The/CompuMgr/DeviceManger /AdminTools of /ControlPanel of system, I see that the drivers for the PCI Bus and network controller are missing.
  Any suggestion on which driver files may resolve this problem.

  Thanks in advance
  Shine

  Hello

  As Tobi said check the installation instructions. It has listed all the necessary drivers and tools and utilities. As far as I know this list is also important because it is a proper installation order.

  Good bye

• Cannot install driver conexant on windows xp sp2

  Hello i really need help guys recently i installed Windows XP SP2 on my Vostro 1015 and everytime i install the Conexant driver it fails with this error "Driver installation failed could not find the media device for this driver" 
  
  NOTE: in the past i used XP SP3 it installed fine but not in SP2 any solutions guys ?
  

  saad430

  There is no "Audio device" in Device Manager!

  1. install the Dell software system R28801 and restart.
  http://www.Dell.com/support/drivers/us/en/555/DriverDetails/product/Vostro-1015?driverId=NJ7GT&osCode=WW1&FILEID=2731099470&LanguageCode=en&CategoryID=UT

  2 install the Intel Chipset R225247 driver and restart.
  http://www.Dell.com/support/drivers/us/en/555/DriverDetails/product/Vostro-1015?driverId=CGTHY&osCode=WW1&FILEID=2731109570&LanguageCode=en&CategoryID=cs

  3. install the Conexant R286583 audio driver
  http://www.Dell.com/support/drivers/us/en/555/DriverDetails/product/Vostro-1015?driverId=1W8CN&osCode=WW1&FILEID=2731099310&LanguageCode=en&CategoryID=au

  If it still won't install then you need to obtain the fix from Microsoft UAA. (This is for SP2 - it is included in SP3).

  1. open Windows Explorer, go to c:\dell\drivers\R286583 and delete the R286583 folder. It's the Conexant audio driver.
  2. go to http://support.microsoft.com/kb/888111 and get the UAA patch. Install it and restart the computer. The patch is a patch that helps the SP2 to settle with HD audio.
  3 again download driver Conexant R286583 or re-use the previous download if you always...
  4. after he finished self-extracting files and starts to install, cancel.
  5. open Device Manager and expand system down devices. Locate the PCI Device with one? next to him. Go to properties and select Update driver. Choose to manually find the driver but do not Windows to look for. Navigate to c:\dell\drivers\R286583\WDM, and then restart the laptop.

  Windows should detect the Conexant hardware and install the driver. If the above does not work, then uninstall the UAA patch and follow all the steps again, except that this time, use the old hotfix http://support.microsoft.com/kb/835221 UAA that some people say works best for them.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• After installing windows optionally updated my display driver is the cause of problems

  I have DELL Inspiron 14 with windows 7 home preium

  After installing windows optionally updated my display driver is the cause of problems
  Ran troubleshooting it says "material changes could not have been detected.
  Help, please
  Thank you

  Use the function "restore" to restore your system to a point before installing optional updates in windows.

  After that, go to Windows Update and 'hide' the update that caused the problem.

• x 200 tablet, still have problems with smartaudio after driver conexant last updated.

  where the devil file complaint or tech support, whenever I call it, there are people who do not know jack whatever it is.

  I had an x 200 tablet, was seen problem with the beams stupid mistake that keep popping up.  then I updated my drivers conexant coming out who was supposed to address this problem. But it doesn't, it creates more problem.

  Now whenever it starts, an error with smartaudio.   so, it leaves me with 2 choices, or I used the former driver who does not mistake smartaudio. but the beam forming erro. or I use the new driver that will give me the error smartaudio.

  anyone has the solution let me know please.

  running, updated vista business sp2.  and Yes, I've updated all the drivers that I find unnecessary and causes more problems for me.  as the update of the thinkvantage system that made it useless until I have some file and add vista business sp2 in it.

  Yay what's up, I answer to my own problem tech.  I hope this can help some of you.  CUS we are ourselves since lenovo cannot help us with our problems. they should just all the fire so that they can sell their products cheaper. for the ppl who work there are unnecessary.

  "OK for people with the beam forming the problem, just go to c:\program Conexant delete folder there, it's to say" TOMY.

  reason for this is because it won't let you delete the folder of conexant all at once.  and remove it to ensure that the new drivers to install correctly.

  After that, simply download and install the latest drivers from the website of lenovo conexant.   Now you should get only the smartaudio error when you switch to Tablet mode or laptop.

  just go to the c:\program files\CONEXANT\SAII directory, rename the smartaudio and SAIIcpl to something else.  I just added a _ in front of her.  This way, whenever you change the mode it will not create the smartaudio error. and you can rename it back later if you wish, or if someone comes up with a better solution

  now, you might ask, how can we change the parameters for the smartaudio.

  If you really want to set that just go to c:\swtools\drivers\audioc\smaudio\smaudio, there is an icon that is smaudio.exe you can double click and run it to change the settings.

  After that, you should not get the beam forming or smartaudio error.

  Lenovo has probably screwed up on some instructions, which does not run programs properly maybe that happens to people with vista sp2?

  CUS, I noticed that when I upgraded to sp2, the thinkvantage system update will not work until we edit some file and add vista sp2 in it.  You can search the solution on this forum if you have this problem.

  Thanks and good luck

  just need to do an update, while this method a bit worked, sometimes when I start I always get the beam forming the error.  It's just that it does more every time I switch between Tablet and computer laptop mode, which is better than nothing for now.

• Driver Conexant HD Audio - Satellite P100 PSPA3C Win XP problem

  I have a Satellite P100 PSPA3C MA202C.

  I found on the Web from Toshiba site a new Conexant HD Audio 3.44.0.0 driver version for my laptop (Windows XP, 3 GB of RAM)
  and had the bad idea to install it. After installation, the sound is terrible Crackle and interruptions.
  including the sound of Windows boot at startup, when you first open during playback and audio files.
  When a UC program gets started.
  It's never happened before.

  I acknowledge that during installation, I received a message from the system
  warning that this driver is not signed as having managed the "Windows logo test '.

  However, the same situation stands for previous versions of site Web from Toshiba, like 3.21.0.52, who gave the same problems.
  Then I wanted to let Windows choose the right driver, but it turns
  "Microsoft function driver UAA for HD Audio Conexant Waikiki" which provides its own, but has no audio in (microphone).

  So now I'm stuck with the crackling and interruptions of Conexant, or with Waikiki have no microphone.

  It's strange, because the initial configuration worked well. Unfortunately, I do not know how to restore the original configuration,
  It is not written anywhere, that the system cannot understand itself and of the restoration came with the computer dvd
  only allow for a radical total restoration of the status of the day of sale, which is not acceptable.

  What a disappointing experience!

  Can someone help, please?

  Hello!

  S DVD supplied with the computer are called recovery disks and it's the way to return to the factory settings.
  The disc contains the Windows preinstalled with all the drivers and tools of Toshiba.

  I know it's strange, but in my opinion, there is no other way to solve this problem. So back up your data first HARD drive will be completely formatted.

  Good bye

• The driver Conexant Audio Edge 13 in Windows 7 error

  Hello...

  I have the error message when you try to install the Conexant Audio driver in Windows 7.

  The error message goes like this:

  "Driver Installation Failed: could not find the device of MEDIA for this driver."

  I was a little confused because I download the Lenovo site driver supports. But how come it doesn't work?

  Is it that someone has the same problem as I do? Or can someone help me?

  Thank you.

  * Currently, at least I can hear the sound output of my Edge 13, but have a problem with the microphone, because I can't save or have voice chat online for now.

  In any case, the driver installation package for Conexant HD SmartAudio 20582.

  Supported operating system: Microsoft Windows 7 32-bit, 64 - bit.

  My edge 13 Specifications:

  type: 0217-28 a

  Processor: Intel (r) Core i3

  (vivid RAM) memory: 2.00 GHz

  system: Windows 7 Pro 32-bit

  Hello mate,

  Try uninstalling the driver before installing a new from here: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-76131

• ProBook G3 450: Impossible to update driver Conexant HD Audio

  I tried to update the Conexant HD Audio Driver on my ProBook 450 G3 (Win7 Pro 64 - bit) whenever HP Support Assistant offers the update. The last proposed update was SP74946 (10.0.877.61 Q5). The update seems to be successful and I am prompted to restart. After restarting, the older version of the driver (8.65.133.0) is still installed and HP Support Assistant continues to offer the update. My system is up to date with all of the other horses and Windows Update installed.

  Hello

  You are welcome

  This looking a little further, I think I can see what is the problem (I do not work for HP, so you can check this with them).

  Anyway, looking at the cva for this update on the link below (under the [General] section) the pilot that version is listed by Conexant as 10.0.877.61, however this is assigned the seller Version 8.65.133.0_9.0.69.53 - 2.109.0.0 which is what you have already installed.

  http://FTP.HP.com/pub/SoftPaq/sp74501-75000/sp74946.CVA

  So what I think happens is that HPSA sees 10.0.877.61 as a newer version, but it installs with the seller (HP) Version number 8.65.133.0 driver - and so the cycle continues.

  In addition, when you uncompress the SP74946 Installer, the worm text document lists the version of the driver as 8.65.133.0_9.0.69.53 - 2.109.0.0

  Kind regards

  DP - K

• Satellite A300 - impossible to install the audio driver Conexant high definition

  I have a Toshiba Satellite A300 series with Conexant audio... my problem is the following...

  I can't install drivers for Conexant high definition audio in windows vista 64-bit because when I run the installer smartd 221...

  + Setup properly detects the type of audio chipset, but at the end of the installation, finish with the message 'Fail'... +.

  The version I have installed is 4.36.10.0...

  Thank you...

  I'm sorry for my English

  Hello

  Have you tried to remove the sound from the device manager card, first of all?
  If this is not the case, to do this.
  Remove it, and then restart the laptop.
  After restarting again, windows should recognize the sound card and eventually he would ask for the driver.
  Then you could point to the new driver downloaded files and could complete the installation.

  See you soon