Could not save the sound in windows 7 64 bit with Conexant Smartaudio HD

Similar Questions

• Error code 28: could not find the drivers. Windows 7 64 bit could not find the drivers for my Seagate Expansion Portable Drive. The same system works for another 32-bit version of windows 7.

  Hi, I would be grateful for help on this, I bought a new seagate expansion external hard drive not too long ago (abt 3 months old) and tried to use the device only recently (to back up my files). Windows has detected the drive but says that it could not find the drivers. (code 28)

  When I tried the drive on a 32-bit computer, it showed up working find and dandy. When it is plugged in the computer of the alien-ware, same error.
  Tried the uninstall from Device Manager and restart the computer, still the same error.
  Services.msc open and found windows install offshore. He turned on automatic, but the same error came out. Plug and play Windows was already working.
  Checked Windows SP1 worked, still the same error.
  He got me completely baffled.
  Before this, I had other problems with USB and disabled driver signature Verifier (I think that's what it was called) before you boot into windows. Worked very well for my flash drives each time that I did.
  I also had another external HARD drive which was held only 160G and it worked, so I'm not sure what the problem is with this particular external hard drive.
  Please help, I'm going crazy on this problem...

  The specifications of my devices are as follows:

  Computer

  Model:

  Alienware M14x

  Type of system:

  64-bit operating system

  Hard drive model:

  Portable Seagate Expansion 1 TB drive

  Hello

  28 error code means that the device was not fully installed.

  Method 1: Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  To open the Troubleshoot utility equipment follow the given link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can update the drivers and check out them.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information.

  Install a USB device:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Hope this information helps.

• HP 4620: HP 4620 scans very well, but could not save the analysis in a file

  The scanner scans very well, but could not save the analysis in a file. Whenever I try to save, it crashes.

  Hey @motikama,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems with the scanning of your Officejet 4620 e-all-in-one for your Windows 7 PC. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Uninstall all software associated with the printer to your computer.
  2. Restart your PC.
  3. Download and install the latest drivers by clicking on this link.

  Please let me know the results after following the above. If you can scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!

  Please help me! ....
  Audio service does not
  I tried Services.msc and tried starting windows Audio...
  The following error has come!
  Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!
  There is a sign of X in the audio icon...
  and when I click on this audio icon... TROUBLESHOOTER OPENS...
  all this happened all of a sudden!
  Please help me!
  Thank you.
  Nischal Sp

  Please provide the error screenshot more better assitance. Also, try this:

  Try to copy and merge the audio from another Windows 8 or better service.

  You can do this by going to the Registry Editor (make sure that the other computer is also a 32-bit system)

  Go to HKLM/system/current control set/services/audiosrv click audiosrv and then on the file menu, select export and save the file to a USB key or drive.

  While copy on your machine and merge. Then restart your system.

  Otherwise reset Windows 8:

  http://www.kapilarya.com/how-to-reset-Windows-8

  Good luck once again :)

• HP Photosmart Premium C410b: could not save the scanned images

  I use the HP Scan application and the error message: -.

  Could not save the scanned images

  appears when you try to save in a folder as a PDF or any other format.

  Ironically, if I'm going by sending to the printer and then save to PDF it works!

  I checked and I'm using 4.2.2 with El Capitan HP driver software

  Any thoughts?

  Hello

  The application from HP for your printer is not compatible with El Capitan, so the output files incorrectly recorded.

  In the Hewlett-Packard folder move HP Scan to the trash and empty it.

  Before you install and use the HP Easy Scan application below which should save the files correctly:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Kind regards

  Shlomi

• Could not start the time service windows on the local computer 2 error

  Cannot update the system clock of time Internet.

  After double click to display the time in the taskbar, the Date and time properties window appears.

  Then I time tab-click Internet, and then click Update now - this produces the following message...
  "Year error occurred getting the status of the last synchronization." The RPC server is unavailable ".
  Then I clicked on start > Control Panel > Administrative Services > Services > time Windows
  I click Start the service and get the following message...
  "Could not start the time service windows on local computer."
  "error 2: the system cannot find the file specified."
  Help!  What now?

  Hello

  Glad to know that the problem has been resolved. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• IE 8 will not save the history in windows xp

  IE 8 will not save the history in windows xp. All good Internet Options boxes checked/unchecked. System Restore has not fixed the issues. Possible registry problem?

  Hello
  I suggest try reseting IE and check.
  How to reset Internet Explorer settings
  http://support.Microsoft.com/kb/923737
  
  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
  

• Virtusa Tennis 4: Fatal error! Could not initialize the Games for Windows Live. This application will be closed.

  Original title: Virtusa Tennis 4

  Virtua Tennis 4 error message has

  "Fatal Error!"
  Could not initialize the Games for Windows Live. This application will be closed.

  Hi Ravikumar,

  Of Virtua Tennis are what version you try to work with?

  It seems that Virutal Tennis version is not compatible with Windows 8.1, you can check the Windows Compatibility Center.

  See also:

  
  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  However, uninstall the "games for Windows - LIVE redistributable Microsoft" and 'Microsoft Games for Windows Marketplace' and resettlement of http://www.xbox.com/en-US/Live/PC/DownloadClient allowed little such users mentioned by ' GeraldLuger answered December 30" provided article.»

  Virtua Tennis 4 - games for Windows LIVE
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-gaming/Virtua-Tennis-4-games-for-Windows-Live/81e86e55-6d8c-4703-B09E-190306110238

  Hope this information helps. Response with status so that we can help you.

• Lightroom could not save the catalog

  I get the following error when trying to save my catalog:

  Lightroom could not save the name of the catalog 'Catalogue Lightroom'.

  I use Lightroom CC 2015.5

  I have over 300 GB of free space on my drive.  I have more than 3 GB of photos.

  Backup follows these steps before the failure:

  Integrity checking,

  Copy of catalog

  Catalog optimization

  The Catalog backup compression

  
  

  Any ideas on what to do next?

  I had a chat with Adobe session live support.  She has tried everything that you guys recommended then asked me to delete a bunch of files on my C drive because it was pretty full.  She said that this drive should be at least 2 x the size of the free catalog.  Once I cleaned stuff backup succeeded.  Thank you all.

• Could not see the LED in Windows 7 X 64

  Hello

  I write a progrm by measurement studio 8.1.2 + vs2005 in win XP, and I put a few LED components in form and generate an MSI for x 86.

  When I try to run the program to the other PC, a PC with windows 7 x 64 could not show the LED components.

  I try the other PC with windows 7 x 64 and the work, just only a PC could not see the LED components.

  How can I do?

  Thank you

  Dennis

  In general, this has to do with the Mesa.dll dependence, which is necessary for styles 3D as explained in this KB:

  http://digital.NI.com/public.nsf/allkb/ABAE912AAE671AC08625788D0076BE51?OpenDocument

  There is also a problem known to distribute to Windows 7, as documented in this KB:

  http://digital.NI.com/public.nsf/WebSearch/046E1B36934C7C198625788000591A1E?OpenDocument

• MMC could not create the snap-in-windows server 2012 R2

  My problem:

  MMC could not create the snap. The snap-in may not be installed properly

  Name: Windows Deployment Services

  CLSID: {8D92C23E-7E5F-42BB-810F-0211F8A453C4}

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Adobe Illustrator CS6: Can not save the file as an EPS file.  Could not save the picture. Cannot print the illustration. Message

  In Adobe CS6 on a PC I can not save the file as an EPS file. I reinstalled the software and made a new document with a simple square in the file, but the error remains. I can save the file to any other format except in EPS format. The error window I said "can't save the picture. Cannot print the illustration. »

  

  Illustrator needs a printer.

  If you haven't set up the print to PDF format or something in the system.

• Could not start the print of Win 7 64 bit spooler

  Hello world. Earlier, I installed Windows 7 updates (I can't remember the exact date) and when I tried a few days then to print something, I could not and my printer had the yellow flag of problem in the control panel. It seems that there is a problem loading the print spooler after trying to start it, I get the following error message.

  Windows could not start the service on local computer print spooler. Error 1053: the service did not demand launch or control in a timely.

  The printer has been tested on different computers and a laptop and works very well. After some research, I found many messages on the same problem as others have some and tried all of the solutions posted here, but nothing seems to work. All the drivers are up to date, all dependencies of print spooler are running, I even uninstalled Adobe reader and I use a different now. The printer is now just an expensive paperweight. Any help would be appreciated. Thank you.

  IEBHO.dll seems to cause problems with some applications.

  It cannot be linked to questions of print spooler.

  However, I suggest trying to remove the IEBHO.dll which seems to be one part of iMesh MediaBar.

  You can uninstall iMesh MediaBar using "uninstall a program"?

  I also run a scan with the two following applications just to see if they do anything:

  TDSSKiller:

  http://support.Kaspersky.com/FAQ/?QID=208283363

  Malwarebytes anti-malware (free version - decline the invitation to install the full version of trial) - do a "Quick Scan":

  http://www.Malwarebytes.org/products/malwarebytes_free

• Multiprocessor Configuration does not support the installation of Windows 7 64-bit.

  I'm going as a joint discussion on the multiprocessor Configuration not supported during the installation of Windows 7 64-bit. I have a HP with a motherboard HP xw6200 workstation. The Machine has dual Zeon 3.20 Ghz. the procesors are identical. There bus 800 MHZ front. It has 6 gigs of 400 MHZ DDR2 Ram. I've updated to the latest version of the bios a few months ago. It has worked very well in dual boot with the last pack of 64-bit XP and Vista 64-bit SP1 for a long time. I tried to upgrade using a clean 64-bit Windows 7 installation when I got the error Stop Multiprocessor_Configuration_Not_Supported: 0X0000003E. I tried to upgrade to Vista and XP with the same error message. I also installed a new unformatted disk and tried to install the operating system again through the CD and got the same error.

  Hi ITCoreTeam,

  Welcome to the Microsoft Answers community.

  Test the material under test once, by contacting the manufacturer. The problem is caused due to hardware.
  Cause: This situation can occur if the incorrect processor packages are used or if the BIOS incorrectly allows a processor erratum.

  Download the update available in the link below and install it. It may solve your problem.

  http://support.Microsoft.com/kb/973879/

  I suggest you have a look at the similar problem and the troubleshooting steps by visiting the link below.

  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/thread/b993c1f9-A1E2-4023-bc7a-0507189a1b8c

  I suggest you to contact the manufacturer of the computer to update the chipset drivers as you have updated the BIOS of your computer.

  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Could not save the privacy settings!

  I go into 'Settings '. On the 'privacy' in 'history' written ' Firefox: will be remembered in history. " Change to "use... custom parameters. ». Click OK. And then I go into 'Settings '. And behold, it is written: "Firefox: will be remembered in history," that is, the parameters are not changed, even if I changed the. What am I doing wrong and how fix it, please show me.

  Hello

  See the article How to fix preferences that will not save for clues that could help. It could just be that a file is set to read-only.

  Let us know if you find out what causes the problem!