Driver Detective

Why when I run the Driver Detective must always be appear all languages of downlooad

Why when I run the Driver Detective must always be appear all languages of downlooad

Hello

You will need to contact support for the developer of this assistance program.

Concerning

Tags: Windows

Similar Questions

  • Smart HARD drive detects imminent failure on Satellite P

    Hello

    I have a message "SMART provides a defect on the disc dur0: TOSHIBA MK5055GSX-(S1)" or (the same in English) "Smart Drive detects imminent failure".
    On the newsgroups different 'people' says to change the disk.

    My problem is not to change the drive, it's easy. Expensive, but easy.

    As I understand it, on each disk from Toshiba, a hidden partition, which allows to restore the machine, with Toshiba Recovery Disc Creator there?.
    I would like to change the disc and use the Toshiba Recovery Disc Creator? to restore Vista.

    How can I reinstall everything what to use Toshiba Recovery Disc Creator? This new disk to reinstall Vista from this new album.

    Thanks for any response.
    ADri

    > If I understand correctly, each disk Toshiba, there is a hidden partition, which allows to restore the machine, with Toshiba Recovery Disc Creator?

    That s not entirely correct!
    The Toshiba Recovery Disc Creator creates the recovery disk! The recovery disk allows to recover the laptop using the drive and not the HARD drive recovery process!

    New portable Toshiba supports HARD drive recovery which allows to restore the laptop without the use of the recovery disc!

    You can view this document on the HARD drive recovery:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

    Welcome them

  • Satellite P300-156 - driver detected on \Device\Ide\IdePort1 controller error

    Hello

    I have recently installed a secondary hard drive in my P300-156 and am having some problems with it. I get 11 event IDS in the event log system "the driver detected a controller on \Device\Ide\IdePort1. error" and suffer with very poor performance with this player.

    The drive is new and works fine in other systems and even works ok if I swap bays my P300-156, but the problem with this is that the drive does not fit in the other Bay, as it is quite thick. The player in question is a Samsung HM100UI 1 TB 2.5 "Sata. I also tried other readers in this Bay, and they work well too.

    I am using windows 7 ultimate and the Intel chipset drivers. It's an Intel ICH8M SATA AHCI controller, the 7.0.0.1013 driver version. Have tried different drivers and the AHCI/IDE mode. Also tried a new installation and the problem persists.

    Am at a loss why this disc problems is there anything else someone can suggest to try?

    Thanks in advance.

    > I also tried other readers in this Bay, and they work well too.

    This means that you had problems with the other drives in the second span?
    If Yes, then I guess some problem of compatibility between the P300 and the HARD drive

  • 1720-smart hard drive detects failure immient

    product name - Z420 HP workstation LJ449AV

    OS - Windows 7 64 bit

    mistake - then the system startup it shows this error

    1720-smart hard drive detects failure immient

    Failed disk: SATA0 (gray)

    In the absence of capital: #B8

    change the status of job worth its rebooted automatically

    only 2 months before our company bought this system, please provide a solution

    The hard drive is faulty and must be replaced. It seems that the computer was purchased about two months ago and is still under warranty. Please contact HP Customer Support in your region to demand service guarantee.

    Please send Bravo

  • Pavilion Slimline s5 1204 PC: Smart HARD drive detects imminent failure

    When I start the computer I get a warning: 1720-Smart hard drive detects drive not imminent failureATAO failing attribute # 5. How can this problem be solved?

    The disc is defective, stop using the PC now, replace the hard drive with a new one and reinstall Windows using your HP recovery media.

    Once you windows reinstalled on the new disk and the PC is running windows, fix the old hard disk on the pc using a sata to usb adapter, see if you can see the drive in Windows Expl. ORER, if you can copy out of your important files on the new drive C.

  • Why I can't remove program (Driver Detective) from my computer?

    I bought (the program Driver Detective 8.0.1 version) a year or more, there is, but I didn't wan't to renew it, so I tried to uninstall it from my computer, but it won't uninstall it won't even show uninstall or repair. the icon is still there, and no matter what I do, I can't get rid of it? Can you help me please?

    a google search found this:

    You are in the feedback forum. Click on the orange ad button at the top left.
    Post questions here:
  • I recently installed Driver Detective hangs up.

    I recently installed Driver Detective.  I did a scan and the scan hangs when it tries to update my printer HP 2100 driver.  I don't have this printer.  How can I get rid of this driver for my Driver Detective will no longer hang up?

    Hello

    You receive an error message?

    Check if the printer is listed in the printers and faxes.

    a. click on start.

    b. click Control Panel and select Printers and faxes.

    c. If the printer does not appear, do a right-click and delete the printer.

    It can also get recommended drivers for your hardware through Windows Update.

    How to download updates that include drivers and hotfixes from the Windows Update Catalog

    http://support.Microsoft.com/kb/323166

  • The Delete box is not upward trying to remove Driver Detective in the list of programs

    When you try to remove Driver Detective, who downloaded by mistake, using the Control Panel Add/Remove utility if poster change button, not the button Delete. How can I delete/remove the system? I'm on Windows XP Professional with service pack 3 and have ESET as my anti-virus software.

    Detailed instructions with screenshots to uninstall Driver Detective

  • I "don't play the CD or DVD no drive detected

    I can play any CD or DVD and I can't download or play games or install games or software? Do no drive detected they were there one day and gone the other I have no idea on how and where they are gone I am very new to this computer and the computer and consider myself a novice or beginner

    Start here

    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • Windows Vista Home Edition Pro CQ5110F, Disk Boot Failure, error BIOHD-2, caveat: no drives detected

    The Windows Vista Home Pro CQ5110F was Ok AM. and the afternoon once I turn on the PC, shows this info:

    Disk Boot Failure, Insert System Disk and press ENTER, (drive witch I do not have).

    Error code: BIOHD-2 and then WARNING: no drive detected.

    It is a Compaq Presario CQ5110F

    What is the best info; To solve this problem,

    Thank you.  REB of mich.

    Hi Mich,

    Seems your HDD fried upward.
    Suggest to contact Compaq and check out what they can offer.

  • Downloaded Driver Detective, how to uninstall? Uninstall will not remove this program. __

    Downloaded Driver Detective, how to uninstall?  Uninstall will not remove this program.

    Hello

    You may have to reinstall - it does not matter if it works.

    Then use Revo to uninstall:

    Revo Uninstaller
    http://www.revouninstaller.com/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • 1720 smart hard drive detects imminent failure. do backup - how can I move my files when I get a new hard drive?

    Hi, I have "1720 smart hard drive detects imminent failure" made a backup, Gather I have to get another drive. How can I transfer my windows vista / files to new drive? Help, please.

    Hello

    There are different ways to do

    and these methods depend on your hard drive work

    hard drive manufacturers will normally provide the cloning to move your operating system software from the old to the new drive hard If your old hard drive still works

    Search for information on this subject on their Web site

    If you have vista business or ultimate, you can use the builtin vista complete PC Backup to move

    read the information below

    http://www.bleepingcomputer.com/tutorials/tutorial145.html

    or if you have vista home version you'll need 3rd party software

    link below is an example of this:

    http://www.Acronis.com/homecomputing/products/TrueImage/index.html

    also to put your machine how you bought:

    1. If vista is preinstalled, you should have a recovery on your old hard drive partition

    You can recovery disks to reinstall on your new drive hard If the old drive still works

    ask the manufacturer of the machine how

    2. contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    3. or borrow a microsoft dvd vista

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

  • Driver detective program does not start due to the error of standard police '"Regular", police Arial doesn't support style.

    Have updated to the latest version without result

    Hello Midasi,

    According to the Windows 7 Compatibility Center, Driver Detective version 8 is compatible with Windows 7. What version you are trying to install?
    See the list here for compatibility.

    I suggest that you contact the manufacturer, PC drivers headquarters for assistance with the question and see if they have updated their software.
    http://www.drivershq.com/

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Installation of XP operating system in model of lab manager... No hard drive detected?

    I am currently trying to obtain a model of machine configuration virtual xp in lab management. I have deploy the model, mount the .iso image file, start the installation, but then installing XP spits a message that there is no hard drive detected on the computer. I checked the properties on the machine, there is obviously a hard drive I put in place. It is in the format of BusLogic SCSI parallel. Is there a specific reason for this installation isn't or doesn't see is not the virtual disk? I have not really found something in the help or documentation which speaks of a specific operating system installation issue. Everything is useful, thanks in advance.

    -va

    To install Windows XP, you must have a driver for the disk controller VMware disc. You can consult this article for download one-

    http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1000863&sliceId=1&docTypeID=DT_KB_1_1&dialogID=32908933&StateID=0%200%2029476991

    If that one doesn't work, then, you must submit a request for support and ask management to send you the right driver

  • HP pavilion 500 076ea: no hard drive detected or has no

    Put in a new power supply in a pc
    Comes up with no detected boot drive or does not, how can I solve this problem?

    What I have to go out and buy a new operating system e.g. Windows 8 to solve this problem or is the problem worse than that

    If I missed any information you need help I can provide

    Thank you

    Hi @Fraser11,

    Welcome to the Forums of HP's Support.   I believe that since the departure of the power supply in your Pavilion 500-076ea that your hard drive is no longer detected.   I am convinced that I will be able to help you find a solution, and I ask only that pay you it forward. When solve us the problem, I would mark you kindly post as accept as Solution so that others have the same or similar problem can find what worked for you.

    Please use the document of replacement of the power supply HP and Compaq Desktop PCs as a checklist to make sure that nothing was missed when you have replaced the power supply.  From my experience, most of the time when this error occurs after the replacement of the power supply there is a cable that is not properly plugged.

    Please let me know the results.

Maybe you are looking for

  • Firefox has recently started crashing

    I use 8.1 64-bit windowsHere are the past 5 crash reports. I notice that the memory usage comes without apparent reason. Nothing new has been installed on the computer in the past 6 months. Basically the only updates are standard Windows, firefox and

  • The error I get is %APPDATA%/

    My problem comes from two existing programs updated or when I go to install new I get the same message. Error message % APPDATA%/. How can I get my updates of the program and put in the new programs I waiting?

  • OfficeJet 4500 wireless, windows 7, paper jam

    printer stuck so often and I pulled the paper through the front because I couldn't see any opening at the back. It is permanently damaged? What can I do? each time printer is useless being paper jams. He is 13 months old.

  • Manual for A210

    I'm looking for a manual for an Acer Iconia A210.  Where can I find one, enumerates only Acer a pilot under that article.  Thank you

  • What can I do to correct an error of ipconfig?

    I had internet connectivity problems and tried to solve the problem.  I tried to run ipconfig from the command prompt and get the following error message: An internal error has occurred.  A device attached to the system does not work.Additional infor