Driver for PCLINE PCL-300N?

Similar Questions

• Driver PC line PCL-300N

  Hello

  I'm looking for the line PC PCL-300N webcam Driver. Could someone help me? I've been surfing without success.

  Thank you!!

  Hi jacoboweb,

  Thanks for posting answers.microsoft.com

  If you use www.bing.com and search on 'PC line PCL-300N webcam Driver' you can find the information you are looking for the best results, that you receive in this research.

  Note:
  

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps you solve this problem.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Driver for HP Color LaserJet MFP Pro M PCL 6

  64-bit driver for HP Color LaserJet Pro MFP M477 PCL 6: I have one of these printers, which is able to print double-sided automatically.  The new driver (64-bit) will not accept when I switched to a new laptop, manual duplex printing.  Does anyone else have this problem?  I updated the driver, but the problem persists.

  I managed to find the solution... it is a lot harder than I imagined composed I don't remember clearly how I found it.  But I think it's what you do... Use the control panel to get to the devices and printers, right-click for properties of the printer, then select device settings, then select installed in the duplex unit.  Yes... complicated.  How the average dumb guy like me never to solve such a problem?

• There is no driver for my printer. Now what?

  How to install a printer inkjet (i.e. Deskjet, Photosmart, Officejet or PSC printers) on an operating system Windows that does not have driver officially supported

  With each new OS a lot of printers get left behind and a driver is never written to these printers.  There is no guaranteed way to get these printers working with an OS that is not a driver for them, but in Windows, there is a chance that you can make it work.  These steps are only for an inkjet printer.  A different generic driver would be used for Laserjet printers, and I will do a post split on this topic.  Note: It is not guaranteed to work.

  To install a printer is not a driver for Windows XP in Windows XP:
  1. connect the device to the computer.
  2. Windows will try to find a driver but will not be able to.
  3. close the notifications popping up.
  4. click on the start menu.
  5. click on Control Panel.
  6. make sure that you set it to Classic view.
  7. open the Device Manager.
  8. click on view, then select hidden.
  9. you should see a device in the list with a yellow triangle with an exclamation mark inside.
  10. right click on the device and select install/update driver.
  11. a window will come with 2 choices. Choose "Browse my computer for driver software".
  12. in the next window, select "Let Me pick from a list of drivers for devices on my computer.
  13. in the next window, make sure that the checkbox next to "Show compatible hardware" is not selected.
  14. in the manufacturers list, select HP.
  15. in the model list, select the Deskjet 990c driver or the driver for Deskjet 450.
  16. click Next.
  17. click on finish.
  18 try printing.

  To install a printer is not a driver for Windows Server 2003 in Windows Server 2003:
  1. connect the device to the computer.
  2. Windows will try to find a driver but will not be able to.
  3. close the notifications popping up.
  4. click on the start menu.
  5. click on Control Panel.
  6. make sure that you set it to Classic view.
  7. open the Device Manager.
  8. click on view, then select hidden.
  9. you should see a device in the list with a yellow triangle with an exclamation mark inside.
  10. right click on the device and select install/update driver.
  11. a window will come with 2 choices. Choose "Browse my computer for driver software".
  12. in the next window, select "Let Me pick from a list of drivers for devices on my computer.
  13. in the next window, make sure that the checkbox next to "Show compatible hardware" is not selected.
  14. in the manufacturers list, select HP.
  15. in the model list, select the Deskjet 990c driver or the driver for Deskjet 450.
  16. click Next.
  17. click on finish.
  18 try printing.

  To install a printer is not a driver for Windows Vista in Windows Vista:
  1. connect the device to the computer.
  2. Windows will try to find a driver but will not be able to.
  3. close the notifications popping up.
  4. click on the start menu.
  5. in the search box, type Device Manager.
  6. Select Device Manager from the list.
  7. click on view, then select hidden.
  8. you should see a device in the list with a yellow triangle with an exclamation mark inside.
  9. right click on the device and select install/update driver.
  10. a window will come with 2 choices. Choose "Browse my computer for driver software".
  11. in the next window, select "Let Me pick from a list of drivers for devices on my computer.
  12. in the next window, make sure that the checkbox next to "Show compatible hardware" is not selected.
  13. in the manufacturers list, select HP.
  14. in the model list, select the 990c Deskjet printer driver or the driver for Deskjet 450.
  15. click Next.
  16. click Finish.
  17 try to print.

  To install a printer is not a driver for Windows Server 2008 in Windows Server 2008:
  1. connect the device to the computer.
  2. Windows will try to find a driver but will not be able to.
  3. close the notifications popping up.
  4. click on the start menu.
  5. in the search box, type Device Manager.
  6. Select Device Manager from the list.
  7. click on view, then select hidden.
  8. you should see a device in the list with a yellow triangle with an exclamation mark inside.
  9. right click on the device and select install/update driver.
  10. a window will come with 2 choices. Choose "Browse my computer for driver software".
  11. in the next window, select "Let Me pick from a list of drivers for devices on my computer.
  12. in the next window, make sure that the checkbox next to "Show compatible hardware" is not selected.
  13. in the manufacturers list, select HP.
  14. in the model list, select the 990c Deskjet printer driver or the driver for Deskjet 450.
  15. click Next.
  16. click Finish.
  17 try to print.

  To install a printer that isn't a driver for Windows 7 in Windows 7:
  1. connect the device to the computer.
  2. Windows will try to find a driver but will not be able to.
  3. close the notifications popping up.
  4. click on the start menu.
  5. in the search box, type Device Manager.
  6. Select Device Manager from the list.
  7. click on view, then select hidden.
  8. you should see a device in the list with a yellow triangle with an exclamation mark inside.
  9. right click on the device and select install/update driver.
  10. a window will come with 2 choices. Choose "Browse my computer for driver software".
  11. in the next window, select "Let Me pick from a list of drivers for devices on my computer.
  12. in the next window, make sure that the checkbox next to "Show compatible hardware" is not selected.
  13. in the manufacturers list, select HP.
  14. in the model list, select the 990c Deskjet printer driver or the driver for Deskjet 450.
  15. click Next.
  16. click Finish.
  17 try to print.

  To install a printer that isn't a driver for Windows 8 in Windows 8:
  1. connect the device to the computer.
  2. Windows will try to find a driver but will not be able to.
  3. close the notifications popping up.
  4. hold your mouse in the upper or lower part right corner of the computer screen to show the charms. If you have a touch screen, you can drag your finger left from the right edge of the screen.
  5. click on search.
  6. in the search box, click settings.
  7. in the search box, type Device Manager.
  8. Select Device Manager in the list on the left.
  9. click on view, then select hidden.
  10. you should see a device in the list with a yellow triangle with an exclamation mark inside.
  11. right click on the device and select install/update driver.
  12. a window will come with 2 choices. Choose "Browse my computer for driver software".
  13. in the next window, select "Let Me pick from a list of drivers for devices on my computer.
  14. in the next window, make sure that the checkbox next to "Show compatible hardware" is not selected.
  15. in the manufacturers list, select HP.
  16. in the model list, select the class of PCL3 Deskjet driver, the Deskjet 990c printer driver or the driver for Deskjet 450.  You can also try the driver Officejet PCL 3 class or the class driver Photosmart PCL 3 if others do not work.
  17 click Next.
  18. click on finish.
  19. try to print.

  I hope this helps.

• 8 driver for LaserJet 2300d; Auto part and other print

  I've recently updated to 8 of the window. I have 2300 d printer LaserJet. The original driver of the printer was PCL 5 which allow the capablity to print automatically on both sides of a page. Windows are and to upgrade the driver to a PCL 6. This allows only printing Manual on both sides of the page. I reload the driver PCL 5. but it now allows only for print Manual on both sides. Can someone help me? Thank you.

  Joe

  It worked. Thank you

• CE712A: Driver for HP Color Laserjet CP5225 for Windows XP Professional

  I can't find a driver for my OP de Windows XP Professional 64-bit for my CP5225 printer. Can anyone help?

  In other words, the printer is connected to your network with a rj45 cable I guess.  If yes you must go to the information on the printer menu and print a Setup page that will give you the address ipv4 of the printer.  It should be something like 192.168.1.12 now on you computer xp go to printers and faxes and add printer.  Local printer and do not check autodetect, then and on this screen, click on create a new port and the menu drop-down select standard tcp/ip, and then click Next. Type the address of the address of the printer (ipv4) that was on the configuration page and just keep on going until you get to the page of decision-makers.  On the left choose HP and will work on the Strip right down to Color Laserjet 8550 PCL or PS as long as one or the other, and then click Next and change the name to HP CP5225 or whatever you want to call the printer and you can check on this page to make it your default printer.  Complete and you should now be able to print to the printer.

• LaserJet 1300 driver for Win7 problem

  Plugged my Laserjet 1300 in my new computer (System 7) via USB - and Windows could not find the right driver for it.

  I cancelled Windows trying to install driver automatically and put the original driver CD disc (Serial #Q1334-60107 ver 2.0) in drive.
  but I couldn't get Windows to recognize the printer, even after re-boots.

  Since I bought the printer some time ago, I checked for the updated drivers online, that would be 64-bit.

  I installed it:
  UPD pcl5 - x 64 - 5.4.0.11744.exe

  During driver installation, I plugged the printer & turned on at what I thought was a good time. I see this:
  'HP Universal printing PCL 5' as printer - but it will not be printed.

  I tried Windows "Uninstall" feature, but it does not show the pilot, to uninstall it - OR where the driver of the located.

  * QUESTIONS: How do I uninstall the driver? Use disk upd pcl5 - x 64 - 5.4.0.11744.exe OR original pilot #Q1334-60107 ver 2.0?

  What is the procedure for installing this?-I can't find anything, despite an afternoon of Googling.

  Thank you.

  Did you follow this guide to install printing? Installation of LaserJet 1300 Windows 7

  You shouldn't have to navigate to the driver you download. Actually stick it in the trash at the moment when you set "Add a printer", you must select "add a local printer. Ignore the writing to the right, which applies only if everything works properly. If you follow the guide at the top it should install correctly.

  No need to feel stupid and no problem at all to help. That's what I'm here for

  -Sean

• Win 7 driver for Laserjet 2100

  I couldn't know if HP released drivers for the LaserJet 2100 to use in a 64-bit Windows environment. I tried the driver section, but I am unable to check if the driver exists [maybe it's me, my computer or HP that prevents the opening of the section of driver web page, but I've tried and failed several times]. I plan to purchase Windows 7, but will delay for a while if I can't continue to use excellent buddy 2100. I would appreciate any help on this matter. Thank you.

  He there is a universal driver for PCL 5, PCL 6, and PS available for download on HP.com.  Laserjet 2100 drivers are available through Windows Update in Windows 7.

  

• LaserJet 400 M401dw: 10 Windows driver for LaserJet 400 M401dw

  Recently upgraded from Win 7 to 10 to win on my HP netbook.  Get the message to Win, stating that my printer driver is out of date, but Windows is unable to download the new version.  Went to the HP website to find and there are three listed.  I don't know which is the right one for my printer.  They are:

  1 HP Universal Print Driver for Windows PCL6 (64-bit)

  2 HP Universal Print Driver for Windows Postscript (64-bit)

  3 HP Universal Print Driver for Windows (64-bit) PCL5.

  Plase advise which of them, I need to download and install.

  Thank you!

  I think the old driver was a PCL version.  However, given that I print a large number of PDF files, I'll try the PostScript version this time.  Thanks for the quick and complete answer!

• Need driver for printer Samsung ML-1520 on Windows 7 Ultimate

  Need driver for printer Samsung ML-1520 on Windows 7 Ultimate

  Is your Google broken?

  http://www.Samsung.com/UK/support/model/ml-1520/XST

  Unlike a PCL or PostScript driver, a GDI printer driver based on Windows to do the printing.  See http://malta.oki.com/support/printer/troubleshooting/detail.aspx?id=tcm:179 - 140786-16

  A "universal printer driver" is often provided by printer manufacturers when they do not want a printer driver for specific printers.  It allows printing in a variety of printers from the manufacturer, but perhaps not all of the features that includes a driver specific to the model.

• Update for Windows 7 for the printer wizard will not find any driver for printer Panasonic KX-P2023 (Microsoft)

  Please tell me how to locate a printer driver for my printer Panasonic KX-P2023 (Microsoft), as identified on Wizard printer two years ago. I installed this printer on a printer port LPT-1 local two years ago. I recently replaced the hard drive on my computer with the same model that I already had. When I try to re - install this printer with my new drive, search Windows Update driver, but he never finds?

  Your printer driver should already be included with the operating system, just add the printer.

  http://Windows.Microsoft.com/en-AU/Windows/install-printer#install-printer=Windows-7

  1. Open devices and printers, click Start , and then, on the start menu, click devices and printers.

  2. Click Add a printer.

  3. In the Add Printer Wizard, click Add a local printer.

  4. Choose a printer port page, make sure you use a button existing port and the recommended printer port are selected and then click Next.

  5. On the installation of the printer driver page, select the model and manufacturer of the printer, and then click Next.
     Do not choose Windows Update.

  Otherwise the other alternative

  Drivers available at Panasonic (old printer): http://panasonic.net/pcc/products/printer/download/p2023download.html#download1

  KX-P2023 download

  Download instruction

  1. Download the file in the destination folder, e.g. C:\TEMP.
  2. Prepare the formatted diskettes (3.5 "FD) for each compressed file and insert it in drive A.
  3. Run the downloaded file named "" xxx. "." EXE", then the self-extracting file starts.
     (Self-extracting destination is disk has.)
  • Printer drivers and utilities

  Printer drivers and utilities

  < pcl="" printer="" drivers="">

  United Kingdom	Windows 98, Windows 95	P2023W95. EXE	156 KB	28 Feb.2000
  	Windows 3.1. BACK *2	P2023U. EXE	328 KB	20 May.2008
  Other countries	Windows 98, Windows 95	P2023W95. EXE	156 KB	28 Feb.2000
  	Windows 3.1. BACK *2	P2023E. EXE	221 KB	20 May.2008

• Windows 7 can not find the driver for shared printer hp LaserJet 3380

  When I try to add a shared printer on my laptop Windows 7, as a network printer, Windows 7 it locates on the network successfully, but I get the following error messages:
  Windows cannot find a driver for hp LaserJet 3380 PCL 6.
  The file ' *. INF' (unknown) is needed.

  The printer is connected to a desktop pc XP on my home network.

  I tried to attach the printer locally via USB to the Windows 7 laptop and loaded correctly the printer drivers and I printed it. But when I reconnected it the printer on the XP computer I got the error again.

  It is shared, not a network, printer, in order to put up with the TCP - IP option does not work.

  This printer successfully under Vista. I did a clean install of Windows 7.

  Thanks for any help you can provide.
  Jim

  The name of the 32-bit driver is different from the name of 64-bit driver.  You create a Local Port which will basically copy the formatted print data from the part of xpmachine.

  This is the KB how to perform this task
  http://support.Microsoft.com/kb/282842

  on Windows 7
  Add a printer
  Local printer
  Add to the local path
  \\XPMACHINE\printersharename (make a word share name or you must ' "quote all)

  Select the installed driver if you have connected the USB device

  Complete the wizard

  test page printed.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Windows 7 can not find .inf driver for Canon Pixma iP4000 printer connected to Windows XP.

  I have a laptop running Windows 7 (64-bit machine) I want to print from.  The laptop is on a home network wireless.  The office is wireless as well and is running Windows XP.  The Office has a Canon Pixma iP4000 printer connected with a parallel cable.  I installed the latest XP drivers for the printer on the desktop.  The laptop can connect directly to the printer with a USB cable and drivers will download automatically and it will print correctly.  However, I can't connect the printer using the wireless system.  I can go on the laptop to the home network and navigate to the printer and try to install.  It makes an automatic search and says that it cannot find the correct drivers.  I can browse to the file to install on my desktop, but it of an .exe file and not. INF.  I run the .exe file and it installs too, but Setup of printer on the laptop won't let me not by the .inf screen add to complete the installation of a wireless printer.

  Any suggestions?

  Very probably the XP driver name is different from the name of 64-bit driver.  Create a Local Port which copies the data to the print size in Windows 7.

  Here is an article knowledge base how to the names of the incompatible drivers.  Replace the Windows 7 machine for NT4 machine referenced in the article.

  http://support.Microsoft.com/kb/282842

  If you load the printer driver 32-bit on your 64-bit computer, you need the 32-bit driver for Windows 7.  You can do if you have a 32-bit computer of Windows 7 on the network to push pilots up to the machine that is sharing the printer.  None are flat files on the Windows 7 DVD, you need to install the OS or mount the ISO.

  The key to successful sharing between computers that run different printing architecture processors is pilot name.  PCL6 equal NOT PCL 6.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Where can I get a drive for my Gestetner DSm651?

  Just bought laptop Dell Latitude E5520, running under Windows 7 64-bit.  Where can I get the driver for our Gestetner DSm651 Copier? Catalog MS does not seem to be it.  The driver file that I downloaded from the Web of Ricoh site doesn't seem to work.

  Any help appreciated.

  Thank you

  On Rioch download pages, you have selected the drivers for win7 64 bit, (had to ask) and from this link, I see that they list 8

  The PCL drivers I would however were available via windows update

• Win 7 has no driver for internet

  I don't have a driver for win 7.   My os is 10.11.6 I downloaded current drivers for win 7 on my FlashDrive twice how to do the driver I need for the internet?

  There is no driver for the internet, it is, however, drivers for the wired ethernet card and the card wifi

  Download the bootcamp driver zip https://support.apple.com/kb/DL1721?locale=en_US

  Navigate to the manufacture of chip ethernet driver file and the wifi and install their exe files in windows