driver of the Internet

Similar Questions

• Internet worked well until I have Reinstalled windows vista 64 bit, now my Internet does not work, says that I don't have a driver from the Internet.

  Internet worked well until I reinstalled windows vista 64 bit on my Dell laptop, now my Internet does not work. Went into Device Manager and there is no network adapter. I tried to reinstall the driver that came with my laptop disk but it doesn't seem to work, says that I need an updated driver. I don't know what else to do, I have to install a new driver from the Internet? Ugh becomes very frustrated!

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• No driver of the internet?

  Hello

  We have a PC running Windows XP that has been cleaned.  We are no longer able to connect to the internet.  Apparently there is no driver more to connect.  Is it that I can download?  Thank you.
  Network drivers are available from the manufacturer of your PC. Dell, HP, Gateway, etc. Consult the appropriate site.
   
   

• Bad driver of the Internet

  I have HP 630 Notebook A1E27EA #BED, OS: Windows 7 Ultimate 32 bit.

  I have a little problem.

  I installed driver Atheros wifi and the pilot did not work right. I got the wifi pilot before I have to reinstall the OS and I don't remember name. This work of great pilot and I got Windows 7 Home Premium 64-bit. I don't understand why the driver doesn't work now.

  Please, help me.

  Looks like you just need a driver that works for your laptop model.

  Here a link to the download page of HP driver for this model of laptop and Windows 7 Home Premium 64-bit.

  These are the drivers of HP has tested and approved to be the latest official drivers.

  Try to install the network driver Atheros from here and it should do the trick as long as it has an Atheros inside. There are other providers of network adapters in the list, then you could have one of them. If the Atheros Installer determines that it is not for this system, then I would try one of the others.

  Let me know what happens.

• ThrustMaster driver on the internet will not play

  driver will not play iam get blinking green light help please

  We are not in a position to help unless you help by providing us with as much information as possible.

  Suggestions for asking for help on a site.

  http://support.Microsoft.com/kb/555375

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• Unable to connect to the internet via a cable brodband or dsl computer laptop HP pavilion g6

  good day to you all...

  Please kindly help regarding me my problem... I deleted my local c drive using a third-party gparted application... I did this because I do a partion before I reformat my laptop HP PAVILION G6... then I have already installed windows 7 on my laptop, but my problem now I can not connect to the internet via broadband or ADSL cable... can you please help me find a solution... also, my wifi does not work before and I found the wireless LAN driver here I download yesterday... now wifi works...

  Thanks in advance

  Hello

  Please download the driver from the internet of the HP website steps below.

  1. Go to the web page software downloads & HP driver for your model.

• After that Windows Update Setup, I can access the internet.

  Internet drivers knocked out by windows update

  updated Windows pack hit my driver from the internet, I have a Hp pavillion deskstop... need help to log on the internet... I have a strong signal, a cable ethernet and "limited access", but not internet pages will open... I have a laptop to connect... Thanks Robert

  Hi Robert,.

  You receive messages or error codes?

  You can try to uninstall and reinstall the network adapter drivers and check.

  a. click Start and type in Device Manager in the start search and press enter.

  b. expand the network adapters in the Device Manager

  c. right-click on the device and click Properties

  d. click on Driver tab and click on uninstall the drivers and click OK.

  e. restart the computer and check.

  We can also refer to the computer or the device manufacturer's Web site and try to update the latest version of the network drivers.

  Updated a hardware driver that is not working properly

  Also check out the following link and check:

  How to troubleshoot network connectivity problems in Internet Explorer

• I need save a compleetly on flash or hard drive website and study it offline in a place that I can't access the internet

  I need saves a Web site completely on my flash or hard drive and study it offline in a place that I can't access the internet.

  Usually, you can try to access the menu of Firefox and click Save under...
  Make sure the full web page is selected for the page and the major part of its dependencies will download.

  In any case, if the Web page is just a web or a different kind of canvas where you don't need to click anywhere to see it as you want, just print the pages you need in PDF.

  To do this, you can download a free PDF printer, like doPDF or PDFCreator. Just to get Firefox /... print and select DoPDF or PDFCreator as printer. Follow the steps on the screen to convert Web page to PDF, where you will be able to move it and read it with the more comfort you can imagine. Don't forget that the second computer should have a PDF reader, like Adobe Reader, SumatraPDF or Nitro PDF, all free.

• When I installed 10 windows on my mac, I accidentally deleted the MacOS Partition. I made a new D: drive partition in Windows 10, but when I go to the restoration of the internet and try reinstalling Mac, it says that the disk is locked. How to unlock thi

  So basically, I downloaded the ISO of Windows 10 file and installed using boot camp. During installation, I accidentally formatted the Mac OS partition and replaced with the windows one. Now, I'm trying to reinstall Mac OS using the internet retrieval feature. I partitioned a new D: drive named OSX, and there is no data on the disk. I then click on reinstall Mac OS. I try to select the disc of OSX I partitioned, but it says that the disk is locked. Anyone know how to unlock the drive or should I do something else?

  Thank you very much

  CJ

  I think one of the problems might be that my Windows partition has replaced the C: drive where was the OSX partition. I tried to move the Windows operating system on a drive b or e :), but it won't let me. Let me know if this could be a problem too.

• InstrumentDriver Finder closed if not connected to the internet, how to get to the driver

  Instrument Driver Finder closes with an error message "check your internet connection".

  It gives the same message if connected to the internet. For this reason, not be able to access already installed drivers.

  Dennis, I can do everything you mentioned.

  I found my solution. I wasn't able to access the palette of my drivers. I might have it accessible by finder Instrument pilot. But I found alternative. Access it by going to > functionspalette. If the functions palette appear dim, go see > control palette > search type the name of your driver.

• HP Pavilion a1118x/PX757AA-ABA: I have upgraded to Win 7 64 but lost the driver for the Ethernet connection and unable to connect to the internet

  I can't connect to the Internet, because none of the network drivers are showing. I'll use this for Microsoft Flight Simulator so what card Ethernet buy to install or usb wireless driver do I need to buy to install. The current Ethernet is built-in to the motherboard. The number on the Ethernet Jack real housing is p53-153-11z9, and it's a salmon motherboard.

  Hello:

  I compressed upwards and tied the ethernet driver that shows support for the hardware ID you have validated, below.

  You will need to manually install the driver as follows...

  Download and uncompress the file that I attached to his record.  Do nothing with the files in the folder.

  Go to Device Manager and click on the ethernet controller requiring driver.

  Click on the driver tab, click on set to update driver.

  Select her browse my computer for driver software option and navigate to the folder you unzipped.

  Make sure that the include subfolders is selected, and I hope that the driver will be installed.

  Then restart the PC and see if you have network connectivity.

• Error: unable to contact IP driver, code 2 error unable to connect to the internet.

  Original title: failed to contact the driver of the intellectual property, the error code 2.

  Using XP Pro SP3 with MSE, I got, perhaps, AV Protection 2011 virus. After cleaning, I couldn't connect to internet... Internet access icon showed I was connected, but I was unable to connect to any site. On startup, I got the error that spampal is unable to use port 110 and this that I solved it by uninstalling Spampal. As a result, I now get 'unable to contact driver ip, code 2 error '. Device Manager will not display any errors.

  I did reset winsock.

  IPCONFIG/all reports ~ an internal error: the request is not supported.
  Contact the Services de Support technique Microsoft for assistance.
  Additional information: host name of request impossible.

  Are there instructions to resolve intellectual property issues or should I do a system recovery?

  I thought that MicroSoft offers no support virus of cost recovery. Which would include management of this problem?

  Follow-up... I found some good suggestions that I'll try to Jack MVP and Molly Mae found at the related link ~ thank you

  Loss of the internet wireless connection, do not seem to have an ip address now, need help!

  Error code 2 is BACK to talk about 'file not found '.

  If you see this:

  Windows IP configuration

  An internal error has occurred: the request is not supported.
   
  Contact the Services de Support technique Microsoft for assistance.

  Additional information: host name of request impossible.

  Take a look in the folder c:\windows\system32\drivers for this file (assuming that XP is installed on your C drive):

  Tcpip.sys

  If the file is missing, you must replace it.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Look there for a backup copy of the file tcpip.sys and paste in the c:\windows\system32\drivers folder where it belongs.

  If you do not see a copy in the dllcache folder, search for a copy here:

  c:\windows\ServicePackFiles\i386

  If you do not see here, you can download it from my SkyDrive and network disks exceeds the system afflicted on a USB or floppy drive.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called tcpip when the name of the file should really be called tcpip.sys (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• Need a downloaded driver Flash driver for dell pc cannot connect to the internet

  I need to know which driver to download and how to download it to a flash using my laptop girls with an internet connection for my dimension of dell 3000 unable to connect to the internet, pc does not recognize my modem please help!

  Discussions were merged.

  Deleted duplicate.

  Hello

  Here is a link to Dell Support drivers for your model computer:

  http://www.Dell.com/support/drivers/us/en/19/product/dimension-3000

  Find the right drivers on the Dell link > download and save on your daughter's desk > then copy to Flash Drive > transfer and install them on your computer

  See you soon.

• I have a dell latitude 610 laptop that I had to wipe the hard drive and reinstall windows xp pro and it does not have all the internet apps

  When I reinstalled win xp pro it didn't install any help net drivers that I can't get on internet

  If you cannot access to the use of the internet, another computer and save the driver on a CD/DVD/card reader.

  Download network drivers for Internet

  Visit the manufacturer's Web site and select your model (this is usually done in the Support section). You should be able to download drivers for your model if they have drivers for your version of Windows. Download the driver and then follow the instructions to install.

  Reference Dell Driver Downloads:

  http://www.Dell.com/support/drivers

• Access to the hard drive of a PC to another one from the internet (or anywhere)?

  Dear Sir/Madam,

  I have computers of towing and both have internet. How can I access hard disk of a PC of one of the internet (or anywhere)? I have connected and can access the PC with the software "Remote Desktop connection" and "TeamViewer". But I want to access the hard drive or explore one of my program by typing just the necessary contact in the internet address bar or simply click on the specific path or defined link.

  With respect,
  Marie payen

  Hello

  Both computers have Windows XP installed?

  Follow the below mentioned article:

  Overview of the Network Setup Wizard
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_wizard_overvieww.mspx?mfr=true

  Alternatively, you can follow the below mentioned article:

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Follow the items listed below:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/524.mspx?mfr=true

  http://support.Microsoft.com/kb/308887

  http://support.Microsoft.com/kb/304040