Driver Tecra 8000 graphic?

Similar Questions

• Tecra 8000 - how to connect the HARD drive to another laptop?

  Hello, what kind of camera do I need to connect an old hard drive Tecra 8000 to a laptop from another production?

  I want to just transfer some data, but the connector on the Tecra ac no longer works.

  Hello!

  You can use a drive enclosure external DRIVE with USB port for this.
  The external HARD disk enclosure should be for 2.5 s HDD with IDE interface. All that s.

  Contact your local computer dealer. I'm sure they will have these cases.

  Good bye

• Tecra 8000: Display driver

  Hi all, I hope someone can help with my problem. I have a Tecra 8000 and just reformat and installed Windows 98 Second edition, the problem is that I have a small window in the middle of the screen with a black border completely round. I don't have the original disks that came with it and said that I need to install the display driver, as I can change the resolution, is does anyone know where I can download this driver from, or can someone provide me with it. I tried the download from toshiba site, but its not available.
  I also tried to change the resolution, but because there is only the installed base driver I can't change it. If anyone can help.
  Thank you
  Mick

  [Edited by: admin on 3 July 05 13:21]

  Hello Mick

  The problem is that this device is not supported for W98SE and that is a reason why you can not find a driver on the Toshiba site. The graphics card in your unit is NeoMagic NM2200 (MagicMedia 256av).

  Please check on the net if you can find a driver on the site of producer of graphics card. There is no guarantee that it will work, but I'm sure that there should be no problem. Please also check the BIOS settings if there is an option called display stretching or something like that. If so he set to active.

• HARD on my Tecra 8000 P11 drive failure

  Hello

  I hope someone can help,
  I have an old tecra 8000 P11 and the HARD drive failed, I tried re starting from the cd but says disc hard is not recognized or does not. any ideas?
  Can someone point me in the direction of a compatible HARD drive replacement or original.

  Thank you

  Chrisp

  Hello

  This is an older unit and it is not easy to give you accurate information but I found one that can be useful for you. Obviously, Tecra 8000 comes with different HARD drive capacities and the largest is 14FR. I don? t know which one you have now, but you should not use the HARD drive with too much capacity because it won't be recognized without doubt. I recommend you check eBay because there you can buy an and it won't cost much.

• Tecra 8000 does not recognize the new HARD drive

  I read on this forum and Google search, but nothing helped.

  I think the disk on Tecra 8000 (Pentium II, 266 Mhz) is "dead".
  I tried to replace it with another laptop to see if that would work.

  The laptop does not, even if I put just like the original.
  Y at - it somehow special or what I have to change something in the Bios?

  Hello

  Don t need to change BIOS settings

  As long as you use the compatible HARD disk, the BIOS should recognize the HARD drive automatically without big problems
  What drive did you use? What size, interface, etc.

  The Tecra 8000 is an oldie and I think that you could use only the 4 GB; 6 GB; 9 GB; 10 GB; 14GB IDE hard drives.

  More large hard disks would be not recognized by the BIOS.

• Tecra 8000: Question about upgrade hard drive

  Hello

  I recently bought laptop Tecra 8000 PII 400 MHZ. The laptop has 10 GB of hard drive.
  I want to increase my hard drive, which is a maximum size of the HD can I increaes in my laptop?

  Thank you

  Hello

  Unfortunately there is no official document on a maximum size of HARD drive, but I think you can use a 20, 30 GB without any problem.
  You can ask the service for a partner caught max supported size HARD drive or HARD drive dealer.

  Good bye

• Tecra 8000 SD 2102 DVD Drive problem

  Hello

  I have a Tecra 8000 with a 2102 sd drive, the drive may be used if I boot from a boot disk, but has driver problems when used in Win 2 k. Anyone has any ideas, what is the problem?

  Dave N

  Hello

  a http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home, you can find more information on your drive!

  Choose your player and download the device driver. This should solve your problem!

  Good bye

• Tecra 8000 replacement HARD drive

  Hi, excuse my ignorance, but on my Tecra 8000 HARD drive just died and I was wondering if I need a specific replacement player or if any 9mm HARD drive fit in the caddy?
  TFYH

  Hello

  As far as I know this device was shipped with 6.4 GB of HARD drive.
  I found some details on this HARD drive:
  Type: DADA-26480
  Size: 6.4 GB
  Ms: RW 12/13
  Part Nr.: P000257570

  But in my opinion the best way is to contact the service partner. They have more experience and more information.

  Good bye

• Tecra 8000: Cannot start - Message "Insert disc in the drive system" lights

  I have a Tecra 8000, I've not used for about two months. Now when I try to start the "Disk system to insert in the drive" message on the display. I tried three disks in the system, but they have not been accepted and the same message appears. I visited in the 'setup' and changed priorities and tried to floppy, CD-ROM, HARD disk drive, and the same message every time. Is it possible that the internal battery "backup" is completely flat?

  Hello

  Well, I'm not sure about your suggestion of the bios battery. Usually, you will see an error massage low battery BIOS or CMOS battery low.
  Well, but if the battery is low, so all settings are disabled and the BIOS can't save the changes.
  It's not easy to say what the problem is. If there is something wrong with the material if you ask ASP for help.

• Need driver for PC or TP04GMV561 - Tecra 8000 advanced card

  I just rebuilt a Tecra 8000 with Win98SE and now need the drivers for the Advanced PC TP04GMV561 card which I can't find on the web.

  Thank you

  Chris

  Hello Chris

  I'm not 100% sure but I assume that you need a modem driver for your device. Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Chose your device and you will find all the drivers you need.

  Good luck!

• Tecra 8000: what name has the HARD drive connector?

  Hello
  I need the name of the connector Hdd in Tecra 8000.
  Who can help me?

  Oxford Chris

  Hello

  I found the info Toshiba has delivered two different Tecras 8000. Can you please write exact number of sticker for laptop? It must be something like Tecra 8000 (PAT80AE-xxx).

  It will be perhaps easier to identify which HDD is on the inside.

  Good bye

• Tecra 8000 - TV on WXP

  Does anyone know what I should do to make it work on the laptop Tecra 8000 TV connection output? I have Win XP OS installed.

  When I connect the video cable, the TV screen is all black. I can connect my desktop PC to TV the same way and it works. The laptop has Magic Media 256AV video card. I thought that maybe the problem was with the driver, but I can find them only for Win 98.
  Thanks for your help.

  AFAIK this Tecra older is not delivered with WXP which means that you use your own installation of the OS. In this case check the graphics card setting to activate the TV option.

  It seems that Toshiba doesn't support WXP for this device. Try to find the driver WXP on the card manufacturer download page.

• Updating BIOS for Tecra 8000 without floppy

  I searched this forum a solution update the BIOS without a floppy drive. The only one i found was this thread [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=66966&tstart=0], but there is no file .iso for the tecra 8000 series.
  is there a solution to get the new bios installed on my tecra 8000 without any floppy drive?

  I checked Toshiba BIOS download page on http://www.toshiba.eu/innovation/download_bios.jsp and TRAD BIOS version is proposed. This old Tecra is maybe 10 years and now, Toshiba has offered traditional update the BIOS only.

  Win versions are later available with latest Tecra 9000/9100.
  I'm sorry.

  Maybe stupid question now, but why do you need the BIOS update?

• Tecra 8000 - failure to CD-ROM - new installation disc?

  The CD-ROM drive in my Tecra 8000 has a defect. It attempts to load a CD-ROM, LED is flashing, it stops, and then the drive LED is lit.
  So I guess the drive is down.

  What kind of new CD-ROM is suitable for this laptop? Toshiba only original ones?

  Hello

  Wow, the Tecra 8000 series is really old. Do you use yet this laptop?
  It feels like the notebook would come from the stone age ;)

  However, I think that the CD/DVD drive supports * interface IDE but not all readers would be compatible due to master/slave/cable select settings

  It seems that the reader of DVD-ROM + Toshiba - SD-C2002 + would be compatible.
  Not sure if you'll be able to get this disc because of the age of the unit, but probably the authorized Toshiba maintainer in your country could provide some readers compatible optical disc

• How to get to his work on W2k on Tecra 8000?

  Is it possible to get the sound to work on a Tecra 8000 using windows 2000 pro? I just upgraded from win 98 and the audio driver install the Yamaha opl3-sax, but there is no sound. I tried uninstalling and reinstalling different drivers, but none seems not to work.

  Hello

  I also recommend to check the Device Manager. If there is no yellow exclamation next to the sound card, so I would say that the audio driver has succeeded not installed and there must be something wrong with the audio settings.
  Have you checked the sound and audio devices in the control panel? You should check all the audio controller if they are defined at the top level.
  In addition, I would recommend controls the controller of volume on the side of the laptop. People sometimes forget to define. ;)