Tecra 8000 SD 2102 DVD Drive problem
Hello
I have a Tecra 8000 with a 2102 sd drive, the drive may be used if I boot from a boot disk, but has driver problems when used in Win 2 k. Anyone has any ideas, what is the problem?
Dave N
Hello
a http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home, you can find more information on your drive!
Choose your player and download the device driver. This should solve your problem!
Good bye
Tags: Toshiba
Similar Questions
-
Tecra S2 - NEW cd/dvd drive
Hello
I just put in a new cd/dvd drive on my computer laptop tecra s2.
Only problem, when I start under xp the cd/dvd drive works perfectly, but I need to install vista on my computer and my bios does not recognize this drive. When I change the priority of the first cd/dvd boot it skipps just my cd/dvd drive and loads as usual.
help pleaseThe new drive is perhaps the correct master/slave settings.
Have you tried a different CD Bootable? Maybe the Vista disk burned correctly (if it is a rewritable disc)
-
Portege 4000 CD/DVD drive problems
Afternoon,
Someone at - he experienced problems with the CD/DVD drive on the failure of 4000? If so, had any luck by encouraging working again?
Thank you
Andy.
Hello
If there is no way to make it work again try to use the System Restore tool or preinstall OS using the recovery CD. After that it should work fine again except there are a few hardware malfunction.
Good bye
-
Satellite 2430 DVD drive problem
Hello
My Satellite 2430 has had a strange DVD problem and may not know what is all about. All started when I tried to make a full recovery. The unit was not able to boot from the DVD. I checked the DVD player with different bootable disk, but still nothing. Unit won't boot from DVD drive even if you press F12 and peripheral DVD selected. Not to mention that the recovery DVDs is loaded normally in my desktop pc. Notepad starts Windows OK the HARD disk and, which is incredible, is that, inside Windows, everything is OK. The DVD player works like a dream. However, it is not enough to perform a full restore, as the recovery process cannot be initialized by Windows. A leap that the BIOS is at the origin of the problem, I've upgraded to version 1.6, but there is no change in the behavior of the DVD.
Any thoughts, before using a big-big hammer?Hello
Have you tried to change the boot priority in the BIOS?
If this isn't the case, then first change the startup procedure to the CD player. The local network must be on the end. -
Lenovo y530 Windows 7 installation cd/dvd driver problem
Hello everyone!
I'm a happy user of Lenovo y530 bought with MS Windows Vista Home Premium. I have easy access to your MSDN AA software. It allows me to download and install Windows 7 Professional for example. I downloaded the image, tested on virtual machine and it works fine. So I decided to install it directly on my hard drive for portable computers. I burned a dvd with a possible minimum speed and here I had a problem. It starts very well, I choose the language and locale, but after she, I have information that there is a missing cd/dvd driver. Installer wants to give me a file location.
I don't know what driver is needed. I downloaded files related to my Optirac drive but they are all exe and it does not accept the installation program. Could someone help me?
I searched many forums, but there is no ansfer of satisfaing I can't use USB key to install it.
I also tried another DVD to burn, another Windows build - and the result was the same.
Edit: have you tried with another order of start (CD 1) - with the same results
The response was quite strange for me. I tried a DVD + R instead of DVD - R disc and it works
-
I'm having a problem with my dvd r/rw drive, it does not recognize a cd - rw that contains data on it as a dvd/cd-rw, instead it recognizes it as a CD. However, she acknowledges a Virgin dvd/cd-rw as a dvd/cd-rw. Can someone explain this causes the drives are not fully and I'm using nero6 to write files on the disks.
Hi gy-tek.
1. When did you start to question?
2. you remember to make changes to the computer before this problem?
You can try to check out the following link and try the Fixit or the steps for Windows XP:
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
If the link above does not resolve the problem, see the following link and check:
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problems
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit ourMicrosoft answers feedback Forumand let us know what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Code 19 CD/DVD drive problem.
My CD/DVD drive is not recognized. I go into the Device Manager and it says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »
I tried to uninstall then restart and reinstall as troubleshooting says and I still have this problem.
I tried "Mr. Fix it" and tells me that it cannot solve the problem.
I tried to go through the steps of using regedit and there are no "less" filter to remove, only a "superior" filter When I look for what to do if there is no lower filters to delete, there is no help in finding.
I checked my driver, that is until this day of nto.
I tried a system restore. Did not work.
I am at my wits end and any advice would be very welcome. It seems at this point, I need to reinstall windows xp, but I have no idea how to do it even without a working cd player.
My OS is Windows XP pro with service pack 3, and is my reader of cd/dvd LITE-ON COMBO SOHC-5236V.
Thanks for any help.
Hello
In this case, try to remove the filters in your registry of the computer from the CD/DVD drive to get rid of the error CODE. Please see the link below:
http://support.Microsoft.com/kb/982116
Thank you! :-)
-
Re: Cd/DVD drive problem - code error 39 on Satellite P series
Hello
It is my first request for assistance.
My CD/DVD drive is most recognized, and when I go to Device Manager and click on CD/DVD I'm informed that the cdrom.sys file is there but cannot be loaded.An error number 39 is reported.
Any advice would be greatly appreciated, but please keep things simple to the actions of a single line if possible.Of course, you can get a few tips ;)
I think you might find faster if you are looking for first in the forum, but I'll try to help you too.He error code 39 is very common issue and can be resolved easily.
See this MS knowledge base article:
http://support.Microsoft.com/kb/314060/en-usSo first of all remove the CD/DVD drive device manager.
Then access the registry using the regedit command and delete the Upperfilters and Lowerfilters completely from the following registry key values:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}Reboot the laptop and wait until the CD/DVD drive has been installed again.
That s it. ;)
-
Tecra M3 Win 2003 Server driver problems
I just (this morning) put his hand on my new Tecra M3. I installed Win Server 2003 and problems with some drivers. With the lack of drivers 2003, I downloaded all the drivers XP and have been installing them without any problem, except the following:
Toshiba Configfree, DVD RAM, Mic effect, Extensions, Mobile, Wireless Hotkey and Intel Wireless LAN a / b and b driver Intel Wireless LAN a / g driver.
These all come with an error something like 'not supported on this operating system.
I also have a PCI device that cannot be identified - (yellow? in Device Manager).
Finally, I get a windows script host error when I boot - program Toshiba Toshiba management Console\toshealthlocals.vbs, line 31, 1 tank, found 80041002 Code, Source SwbemService *.
If someone could shed light on the lack of drivers for 2003, or suggest a way around it and also a solution to the management console fuse, I would be very grateful!
Colin Lacey
Archaeology
University of SouthamptonHello
Tok is fair, but you should notice that Toshiba don t sell laptops with a Win Server 2003 OS and there is no official support for this. Sorry, but in my opinion, that it won't be easy to make it work properly.
-
Portege M200 error - CD/DVD drive problem - Code 39
I have a problem. I would like to perform a recovery on my m200 Tablet System.
I have a dvd external drive (as the m200 has not built into the player) and the correct recovery disk.
However, because of a problem that occurred some time ago, there is a problem with the driver (+ Windows cannot load the driver for this hardware device.The driver may be corrupted or missing. (Code 39) +), and so I can't start the recovery.
If someone knows a way I can fix the driver, or another way to perform a system restore, it would be extremely useful!
A solution to the problems of one or two would be great.Thank you very much!
Hello
> The driver may be corrupted or missing. (Code 39) +), and so I can't start the recovery.
Are you sure about that? This code appears in running the operating system but recovery doesn't run under the operating system currently running.
Please try to start the recovery procedure and let me know exactly what is happening. -
Tecra M9 (PTM91E) and touchpad driver problem
I had to install * Win 7, 64 bit * on my laptop * TECRA M9 PTM91E *.
Most of the drivers could be found, but the * touchpad * is turned off. In addition (?) I get an error message, that a pilot for "* communication controller *" (ID: PCI VEN_8086 & DEV_2A04 & SUBSYS_00011179 & REV_03) is missing. Compatible devices would be PCI VEN_8086 & DEV_2A04 & REV_03
I don't know, TECRA M9 is not supported by Toshiba for Win 7, but can someone help me with this problem of driver?
Thanks in advance.
Have you tried to install the driver for the touchpad Vista?
-
Satellite A - CD/DVD drive problems
Hi guys go crazy...
I have the following questions, trying to burn a cd or dvd. Sometimes I'm not recignise the disc as a blank disc ready for use, sometimes it burns then shows nothing on the disc, sometimes it burns more than one disk then fails, sometimes it works perfect...
Today for example, I put in a 6 discs tried to copy the data off hd then failed, 7th disc works fine. Then when I go into the program, he suddenly used recignise of blank discs, I'd caution saying cd/dvd inserted could not detect with success, there is no logic to it... several times I went in only ashampoo and it does never no cd burner device detected, never had this before... Sometimes I questions with him rarely find a dvd that I have to put a few times and then he found it.
Im not sure if its related, but I have this error came as well, or what it is - this related to?
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.0.6000.2.0.0.768.3
Locale ID: 3081More information about the problem:
BCCode: d1
BCP1: 02DAA3C4
BCP2: 00000002
BCP3: 00000000
BCP4: 8AD7707C
OS version: 6_0_6000
Service Pack: 0_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\Mini051209-02.dmp
C:\Users\Ryzie\AppData\Local\Temp\WER-81635-0.SysData.XML
C:\Users\Ryzie\AppData\Local\Temp\WER71B5.tmp.vers ion.txtRead our privacy statement:
http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409I ran a cd cleaning through it no help... tried to diffΘrents cds and dvds without help, install windows from scratch twice and update some software, used software of different formatting and options.
I have restored the backup disk computer not better, I updated the package value drivers and silent dvd software. I tried to burn in Explorer, nero, shrink dvd, ashampoo buring etc etc... Still get mixed results.
Im not sure if it's a hardware problem or software, I've never had a problem with it reading true copy DVD, sometimes probs wih burned those but if I put it six times, it works.
Any ideas, im wasting a lot of CDs and DVDs with my failures...
Hello
Burning questions of CD or DVD are mainly related to a non compatible drive or finally it may be really a hardware problem (ODD).
But first, you should check some different discs from different manufacturers.I had similar problems, but since I use the R TDK (CD and DVD), I have not noticed problems
PS: I use Nero too. in my opinion the best burning software
See you soon
-
Satellite A100 - 785 PSAANE - CD/DVD drive problem
Hello friends,
I have a Toshiba Satellite A100 - 785 PSAANE and its configurations are as follows:
1.87 C2D Ghz, 1 GB of Ram (512 + 512), Windows Vista Basic, CD/DVD read/write...
Question: Its been long enough, I m facing some problem with my optical drive. Whenever I insert a CD that is originally made by any company, it works fine. At the time when I insert a CD that is personally burned with any normal CD data / engraver of DVD or CD that have been created previously by the same laptop mentioned above, its been interpreted as a blank disc. The data on the drive are not displayed.
For example: lets say if I insert a cd of the software as my webcam cd or cd of my printer they can be read normally and work very well. But at the point where I have to enter any cd that was burned by me that contains my personal files, it is read as a blank disc.
This problem does not exist with any of the DVDs. that is not serious every dvd I insert either being a software normal dvd or one that is burned as a given personal dvd, everything works fine and all the data DVD can be read.
I tried to reinstall the driver, I tried to reformat my laptop using the supplied with the notebook Toshiba Recovery CD, but the problem persists.
Between a few months ago, I tried to do a few tweak, as firstly I have insert the cd in the drive and then turn off the reader of cd and then allowing it once again would actually read the cd. But after a few tries, it also stopped working.
Now I have really no idea what should I do to get my CD to work normally.
I hope that this message can help out me.
Your help will be appreciated
Thanks for your precious time
Concerning
Christophe
Hi Claudia,.
To be honest, I never heard A785 Satellite.
You should check the model number again, as wrote Akuma. It would be important to know.But in General if you have the same problems after using the Toshiba Recovery disk it seems to be a bad material work because the recovery disc can restore the factory settings.
-
Equium A60 CD/DVD Drive problem?
My cd/dvd on my laptop Equium A60 drive seems to have stoped working. If I put a disc in the drive of the yellow light on the drive flashes then nothing happens. If I go to my computer, that the drive is most recognized either, and only the hard drive is displayed. I recently downloaded the bios update and I don't know if it affected it?
Can someone tell me what happened or how to fix it?
Thank you very much
Hello
Please check if Device Manager the drive occurs.
Try moving the drive and reboot your device. The operating system should recognize the drive again.
Please post again if the problem persists.Good bye
-
Equium L300 error - CD/DVD drive problem - Code 39
* Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) *.
This message appears in the Device Manager under CD/DVD ROM drives for my laptop and does not have any cd / dvd.
I don't know a lot about my operating system or your laptop computer in general except that it is a Toshiba Equium L300 under Vista Home Premium
Can someone help me with this you problem?
You are looking for in this forum for solutions and similar discussions?
I remember that this was already posted and discussed several times here in the forum.I remember that the solution is simply. the upper and lower filters must be removed from the registry key.
As I have said; Forum search option allows to get more details!
Maybe you are looking for
-
Dear experts, ladies and gentlemen, I stored a few equations on SD card. If I call a return to its store number [RCL, PORT 3, equation, ENTER], the equation appears on the screen. Now when I carry them in the EQ - line [num. SLV, SOLVING of EQUATIONS
-
Pavilion 15-n070sw: is it possible to upgrade a hard drive in this model?
Hello I have a Pavilion 15-n070sw (no longer under warranty) and was wondering about upgrading my drive ssd hard drive. However I noticed some users report problems of compatibility between this model and ssd drive (+ there is no option to set the AH
-
updates will not install, get the error code 80242006 (windXP-64 bit)
Why my updates does he move? for one I get eror Code unknown error 80242006. I use Windows XP 64-bit
-
Why my pc will not open file location
OK, I don't know what happent wen I opened a photo n try to see the location like wen u press the right side of the mouse n putting open file location there are have nothing before n he use to open the image was the n he music whit happent two I try
-
Error "Could not load the page" when you click the backup and Restore Center
Original title: Save reestore center problems OK so I need to restore my pc and when I click on the backup center and restoration he always says "Unable to load the page"... . How can I fix