Drivers Canon LBP-810 for windows 7 64 bit os

Similar Questions

• Looking for driver Canon LBP-4 for windows 7

  Everyone out there knows where I can get a driver for a printer Laser Canon LBP-4?  I just upgraded XP to Windows 7

  Thanx

  Bob

  That from Canon, or through windows update, if one is available

• Cannot find a driver for printer Canon LBP 800 for Windows 7

  Hello

  I use Windows 7, but I can't find a driver for Canon LBP 800 printer. Can you Halp me please?

  Hello Kromanjonac,

  Thank you for your message.  As seen HERE , Microsoft does not display a compatibility for your LBP 800, they show however, compatibility for the LBP 860.  Your best options will be either wait for Canon produce a Windows 7 pilot (who, if you call or post in the forums, they can tell you they are working or he does not intend to write a driver for this model), try the steps mentioned DeadManWalking86, or reach a new printer.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Problems connection Canon SX280 WiFi for Windows 7 (64-bit)

  I hope someone can help me.

  I recently bought a Canon SX280HS that has possibilities of wifi, and I'm having a problem connecting to my laptop.     I use a laptop Dell Inspiron N7110 running Windows 7 (64-bit).   It connects to the internet and a printer wireless via a pretty new without and problems at all Netgear wifi router.    This laptop also has Intel (R) My Wifi Technology, and I can access the utility to it via the control panel.

  After installing wifi set up the software provided with the camera, I first tried to connect the camera via the Netgear router.   After putting in the correct encryption key (I did this many, many times), he search the device, but it is never and eventually times out with a "communication error" and "device not found."

  I was ready to return the camera to Amazon...

  But then I tried to connect the camera using the Intel(r) my Wifi utility.   I activated the technology, put in the correct encryption key, and the cannon appears on the users list, showing its MAC address and a wifi signal strong.   The camera then sees the name of my Dell laptop, but when I try to connect it, all I get is 'connection '.  Finally, it ends with a "communication error" and "connection failed."

  At this point, I find the wifi on the camera works properly because it clearly links to the Intel(r) my Wifi on my laptop.

  Can someone tell me how to configure my laptop to allow the rest of the connection?     Oh, I tried this many times with my anti-virus IT and OFF and my firewall ON and OFF, and it does make a difference.

  Thanks for your help.

  Had the same problem with the same device under Windows. For me, I fixed it by going to control panel > network and sharing Center > view network computers and devices (this, while the camera tries to connect to your PC. I then click with the right button on my camera icon and click "install". Also, make sure that 'file and printer sharing' are on (my PC actually invited this). Don't know if this will help, but worked for me. Can now import wireless!

  All the best,

• What are the best practices to install drivers for Windows 7-64 bit?

  I have HP Pavilion dv6-1115e laptop, which Windows Vista was the original OS. Recently I upgraded to Windows 7-64 bit version, but I still use pilots who originallay came for Windows Vista (no problem at all for the moment). Now I have thoughts of installing drivers that are specifically for Windows 7 64 bit to improve performance. So what I need to first uninstall each software driver and then install the new versions OR I can install them without deleting the previous versions? It would lead to a kind of shock?

  Hello:

  Normally you can just update the drivers without uninstalling existing, unless the installation instructions will tell you to do.

  Some driver packages will automatically uninstall the old drivers before installing new.

  More simply install on the current criteria. I rarely uninstall drivers before updating them.

  After you update a driver, you must always check the tab driver in the Device Manager for the device that you updated to ensure that the new driver installed. You can check this tab before update and then after you updated to note the date/version of the pilot before and the driver date and version later.

  If for some reason, there was no change, then I uninstall the current driver and try reinstalling the newest one.

  Others may have different opinions.

  Paul

• Printer LBP - 1210 Canon for windows 7 64 bit os drivers

  Anyone have driver Canon LBP-1210 printer for windows 7, 64 - bit os,

  Please answer...

  Dilip

  Try vista driver from this link.

  http://downloads.PHPNuke.org/en/download-item-view-g-v-b-g-y/driver%2BCANON%2BLBP-1210.htm

  If this help not try to open devices and Printers window - add printer-printer-use local an existing port-next-click on windows update and wait a few minutes and then search for canon lbp 1760e-PCL5e next.

  mohanad

• Error setting up printer Canon lbp 3300 in windows 8

  Hi all

  Please tell me if the Laser Canon LBP 3300 printer can be installed in Windows 8 or not. If Yes, then please guide.
  Thank you

  Hi Satya,

  I note that Canon Lasershot LBP 3300 printer can be installed in Windows 8. Please visit the following link:

  http://support-Asia.Canon-Asia.com/P/search?model=LBP3300&menu=download&filter=0&TagName=g_os&g_os=Windows%208

  Please answer this question:

  What is the error you received?

  Please visit these links and download the appropriate drivers:

  For Windows 8 32-bit:

  http://support-Asia.Canon-Asia.com/contents/Asia/en/0900787801.html

  For 64-bit Windows 8:

  http://support-Asia.Canon-Asia.com/contents/Asia/en/0100276401.html

  Note: Please refer to the details given in the links to find out what precautions you should take before you install the printer drivers.

  Please get back to us with the State of the question.

• Satellite U500 - need drivers for Windows 7 32 bit

  Hello

  I recently installed Windows 7 32 bit but I can't find drivers for this version of the OS here: http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
  Could help me is it you please with installing the drivers for WIN 7 32 bit?

  Model: Satellite U500-1DQ PSU8CE

  Thank you in advance,
  Alexandr.

  Hi Gint,

  There is unfortunately no drivers for Windows 7 32 bit so I think that the Satellite U500 doesn t support this operating system.

  Why you have installed another OS without checking the availability of driver?
  AFAIK U500 is pre-installed with Windows 7 64 bit then why you changed obsolete 32-bit version that supports a maximum of 3 GB of RAM?

  In any case, I think you need to get yourself to drivers so check other sites such as Intel, Realtek, etc. directly to get 32-bit drivers.
  Alternative, you can search the Web from Toshiba site for other models of laptops they support 32-bit and have similar hardware as U500.

  Good luck! :)

• Qosmio F60 - 11F - drivers for Windows 7 32 bit

  Hello.

  I have a Qosmio F60 - 11F and I install windows 7 ultimate 32 bit, and I am facing a problem with all the drivers.
  I am looking for in the section of the driver support in the Toshiba site, but I found only bluetooth, also I need for Windows 7 32-bit power management.

  thanx

  Hey,.

  AFAIK Qosmio F60 is pre-installed with Windows 7 64 bit...
  This means that you have installed the 32-bit version of Windows 7 but why? Normally the 64 bit OS is the future and supports only 4 GB or more of RAM. 32-bit is pretty obsolete for such a new notebook performance

  I think that's the reason why you can t get all the official drivers Toshiba page because it of designed for the 64 bit OS only

  If you really want 32 bit you must search for the drivers yourself on external Web sites.

• HP PAVILION DV6 - 7010eo B1K68EA BEATS AUDIO DRIVERS FOR WINDOWS 8 64-bit

  Can someone help me find the drivers of Beats Audio of this laptop.

  HP PAVILION DV6 - 7010eo B1K68EA BEATS AUDIO DRIVERS FOR WINDOWS 8 64-bit

  If you please give me a link where I can download that.

  [Personal information]

  / Arne1963.

  Hello

  If you haven't already done so, install the Chipset driver at the following link.

  Chipset Driver - Windows 8.

  Once completed, restart the laptop.

  When windows has reloaded, download and install the IDT HD Audio driver on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59654.exe

  Kind regards

  DP - K

• DRIVERS FOR WINDOWS 7 32 BITS FOR HP 240 G3 MODEL

  BOUGHT THE NEW LAPTOP HP 240 G3 K1C59PA

  BUT IMPOSSIBLE TO FIND A DRIVER FOR WINDOWS 7 32-BIT OPERATING SYSTEM PLEASE HELP ME IS NOT ABLE TO FIND ANY WHERE

  THANX

  Hello:

  Install all the drivers section of chipset.

  If your model has an Intel graphics card, simply install the graphics driver Intel HD graphics section.

  You need the driver Realtek ethernet subnet.

  You need the Realtek card reader driver under storage.

  I don't know what model wireless card use your model, so please do the following, and I figure that out and tell you what you need for that driver.

  Go to Device Manager and click on the device named network controller.

  Then click on the Details tab in the upper part of the window network controller.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  On this list and select the item named hardware ID

  After the first string of characters you see in the window that begin with PCI\VEN.

  After you have installed the drivers that I suggest that you should have most of the installed devices.

  You can find the ID of the hardware for all remaining devices that need drivers using the method described above, and I'll post the links to those too.

  The first line of unknown devices does not start with PCI\VEN.  But display the top for all those line too.

• Portege R700 - need drivers for Windows 7 32 bit

  Hello

  I got the new R700 I develop a version of Windows 7 Enterprise for and I can't find the driver files or install correct programs for the 32-bit version of the TOSHIBA fingerprint utility. I found the download for the R700 on the US site, and while this installs, it doesn't have the 32-bit driver for fingerprint reader in the R700. Can someone direct me to the correct download, or display the x 86 download the site of NZ?

  BTW - the x 64 download works fine if I install Windows 7 Ent x 64 and install it.

  Model number = PT311A-00J00Q
  Component = AES1660 authentic Tec Inc.
  PCI device ID = USB\VID_08FF & PID_168B

  Thank you

  Hey,.

  Usually, your exact model number is listed in the Australian page it seems you have an Australian model:
  http://www.MyToshiba.com.au

  The problem is that I can t find any 32-bit drivers it :(

  So I checked the European page where I found a similar model, PT311E. There you can download Fingerprint Utility for Windows 7 32 bit, it s is available!
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios
  Laptop > Portege > Portege R Series > Portege R700 > PT311E > Windows 7 32 bit

  Check this box!

• Drivers for Windows Vista 64-bit on Satellite L300-01:00

  When can I get the drivers for Windows Vista 64-bit? Or I have to intall drivers 32-bit on my 64 bit Vista operating system?

  Please links ;)

  Hello!

  What Satellite model do you have?

  You cannot install the 32-bit drivers, you need 64-bit. I think 64-bit is not available for a laptop Satellite L but you can search on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, you can also search on external Web sites for 64-bit drivers.
  For example:
  www.Intel.com
  www.Realtek.com

  Good bye

• Tecra A11 - 11 H - drivers for Windows XP 64-bit

  Hello

  is - anyone know where to find the driver for the wireless card of Tecra A11 - 11: using Windows XP 64 bit, does anyone have a complete list of the hardware models Tecra A11 - 11: using as toshiba support website is not driver for Windows XP 64-bit.

  Thank you very much

  Hey Buddy,

  Windows XP 64-bit is not supported by Toshiba, there is no drivers for this OS. The 64-bit version of XP was not very popular then, probably, you will find all the drivers on external pages. If you want XP I recommend the 32-bit version or Windows 7 professional who has an XP virtualization mode.

  Tecra A11 - 11: 00 a WLAN Intel card in order to check the Intel page directly. Maybe you can find a driver: [www.intel.com]

  In addition, if you install a hardware such as Everest or PC Wizard 2011 diagnostic tool you can check the installed hardware and so you can search for drivers yourself.

  But as I wrote already: choose another OS ;)

• Tecra A11-13 q - are there drivers for Windows 7 32 bit

  Hello

  I want to buy portable (as in the subject).
  In the shop, there are only 64-bit Windows 7.

  My question - is there drivers for Windows 7 32-bit system if I want to change the system?
  Or I have to use only 64 - bit.

  And another. I found on the web that models the Tecra A11 form are - PTSE4E, PTSE1E, PTSE0E and in stores there are models such as 13 q, q 11, 131? who's who?

  Hello

  Yes, it seems that Win 7 32-bit drivers are available on the European driver Toshiba page.
  Check just.

  But even if the drivers are not available, you can install the Win 7 32-bit operating system.
  In most cases the Win 7 OS devices automatically recognize and install the common drivers in very rare cases, you will need to get the drivers on 3 third-party pages

  But as I said, it seems that the 32-bit drivers are released

  Welcome them