Satellite Pro L10: AC/battery not recognized

Similar Questions

• Satellite Pro L10: USB device not recognized

  Hi all
  need help on this one. Any USB device connected to one of the USB Ports on the laptop comes with a "unrecognized USB device. One of the USB devices to the computer failed error message". Running WXP SP2 and all updates.

  Any ideas how to get around this?

  Concerning

  Hello

  How devices connect and what devices are connected to the USB ports?
  However, try this:

  Unplug ALL USB device.
  Open the Device Manager.
  View, show hidden devices.
  Uninstall all devices under USB controllers.
  Uninstall all devices in storage Volumes. Say no to all reboot prompts until you are finished. In addition, if a storage Volume doesn't uninstall, ignore her and move on to the next.
  If you have a yellow? with unknown devices, uninstall all of the entries there as well.

  When finished, reboot TWICE.
  Reconnect the USB devices and see if they are properly recognized.

• Satellite Pro L10 - recovery does not work

  I am currently that use the recovery cd of the product on my satellite pro L10, however when I am with regard to the selection of recover whole hard disk (option 1) then continue and then the following message appears on a black screen:

  For a drive partition error checking - please try again!
  Press a key to continue...

  When you press a key, then I get another white screen like this:

  X:\ >

  X:\ >

  I have no idea what to do about it, or even if it is indeed a problem, any help or advice would be greatly appreciated, thanks

  Hello

  Please format the HARD drive again and remove all partitions on the HARD drive.
  Several months ago, my recovery CD did not work. But after formatting HDD, I was able to perform the installation of the Toshiba Recovery CD.

• Satellite Pro A300 PSAJ1E: Touchpad not recognized using Win XP SP2

  Hi all

  I just got a Satellite Pro A300 PSAJ1E, which is preloaded with Vista. It is also comes with a 'product' XP SP2 recovery CD I had to use because of some software work with Vista compatibility issues.

  Unfortunately, everything works well except the Touchpad, which is not recognized by XP at all (without entries, error or not, in the Device Manager).
  The "Recovery" of XP CD installed the drivers of the Alps and the Toshiba Touchpad utility (for turning on and outside), so it seems that it is supposed to work.

  It is activated in the BIOS (which I have also flashed to the latest version, just in case) and is enabled in the software. I also rebuilt the laptop using the "Recovery" CD (the touchpad is not also recognized by starting on the CD "Recovery" which I guess uses WinPE).

  It does not work on Vista, so it shouldn't be a hardware problem.

  Someone at - it ideas?

  Thanks in advance.

  Andy

  Hey Buddy

  Well in your case I would recommend going to the Device Manager and remove the touchpad in the list of devices.

  Then visit the European driver Toshiba page, choose your model of laptop, Win XP OS and download the driver for the Alps Electric and Synaptics touchpad.

  Install both drivers, reboot the laptop and check if your touchpad will work correctly.

  Good luck

• Satellite Pro L10 - query battery power

  Hello

  I'm hoping I have a battery problem or my phone is dead.
  I wonder I was able to use my L10 Pro of the Satellite with the removed battery and the power cable plugged into the wall?

  My laptop has stopped feeding upwards, the charger still has his light, but no power seems to be put into the machine.
  If it works without battery in?

  see you soon

  Of course, you can use your laptop with AC power only.
  Remove the battery and check it out.

• Upgrade of RAM in my Satellite Pro A100 (PSAA3E) was not recognized.

  I have a Pro A100 (PSAA3E) with only 512 MB of RAM.

  I added another identical stick but only 1 has been recognized.
  Each stick is recognised individually in each slot, but never as a 1 GB together. Thus, the two sticks are ok and two slots are okay!

  How can I remedy so that both are recognized?

  Did you use one that is recommended by Toshiba?
  Seems the two modules aren't compatible together hmmm seems very strange.

  How you did upgrade the memory?
  You must disconnect all cables and remove the battery. Then install the memory modules and enter the BIOS. There, you should check if the memory has been increased and set the default BIOS. Don t forget to safe settings!

  Good luck

• Satellite Pro L10: WLan does not work with Vista

  Hi all

  Have tried to get the WIFI adapter works on Vista, have downloaded the latest drivers but still no joy.

  I know it works because I have a dual operating system: XP & Vista.

  All ideas,

  Thank you

  What do you mean exactly by still no joy? Have you installed the right driver WLan and has been the WLan card recognized in the Device Manager?

  I think the laptop is using wireless Mini-PCI Intel PRO/Wireless 2200BG Network card.
  In order to check again if a good driver was used.

  Please don t be angry with me, but it is a book of 5 years and I m sure that it s not Vista capable of course you can install Vista on this unit but it of not impossible that some devices would not 100% compatible.

• Satellite Pro U300 - CD DRIVE NOT RECOGNIZED IN MY COMPUTER

  My cd/dvd drive is no longer recognized in my computer. It seems to be working, opens and closes and seeing little flashes when I put in a disc. but the disc does not load and the hard drive is not available in 'computer '.

  Ive tried the Device Manager. He comes in there, and ive done the scan for hardware changes and its still not to come. Ive also tried the microsoft help forum, and their suggestion didn't help either.

  Any ideas?

  > Ive tried Device Manager. He comes in there, and ive done the scan for hardware changes and its still not to come.
  Have you checked if the drive is listed in the BIOS?
  Check this please.

  I thought is might be only a registry key problem, but if the drive is not listed in Device Manager, if the BIOS does not recognize the CD/DVD drive, then a hardware malfunction could be possible

• Satellite Pro L10 battery did not reach full charge

  On my Satellite Pro L10 battery only reaches 85% charge if leave all night. Is this likely to be a problem with the supply power, circuits inside the computer or charge the battery?

  I need to know the best place to start to spend money!

  Some experience that may or may not apply to:
  -Battery system is around 2.5 years
  -The battery lasts about 1 to 1.5 hrs that seems fair considering his age and his level of violence (left connected permanently and not recycled periodically)
  -Very recently would not pass, with or without the power adapter connected. Solved by removing AC, then the battery, running on AC, then turn off and reinsert the battery. Everything now works on battery or AC.
  -Over problem, system has been itself decommissioned at random. Since the resolution of the problem of market it was not randomly turned off itself, YET!

  Any help or advice would be much appreciated. Thank you.

  Chris

  HM, sounds to me like a hardware problem. But the problem is to understand where exactly the error, if you have the following options:

  * Contact a service partner chartered for a hardwarecheckup and an accurate diagnosis of your machine ([http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT])
  * You can buy a new battery (since it could be the battery, I guess)
  * You can sell this machine on ebay and buy a new one :)

  Hope I could give you some new and fresh ideas. There is almost no other options or solutions, the it s so your choice.

  Greetings

• Satellite Pro L10-103 - USB ports not working not

  Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

  Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

  Hey Buddy,

  As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

  After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

  In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

• Satellite Pro L10 boot password is not the same as in HWSetup

  I recently got a laptop Toshiba Satellite Pro L10 by my employer. I entered a password and then confirm the password again in the configuration of HW from Toshiba in Control Panel of Windows XP. Then I clicked on the recommended option. No string or password was displayed in the box under Registered.

  Since then, I was not able to boot up the laptop as the password that I entered Setup of HW is not recognized by the laptop started upward. I tried to type the password with caps lock, shift, and numlock on also. Are there any bugs or fault with defining a password for starting in the HW configuration utility? If there is a fault or a bug I would have preferred that the portable computer password is removed under the guarantee.

  If I have to pay a Service partner.

  Hi Geoff

  On this path, it is not easy to tell what's going on exactly, but I assume that your employer has implemented BIOS password. You can enter the BIOS settings by using the F2 key at startup?

  The BIOS password removal is not part of the guarantee and it must be paid. In my opinion, you must bring the laptop to your employer. He probably has Admin rights and it can set up passwords on the right track.

• Satellite Pro L10 will not start the system

  Hello!

  I have a Toshiba Satellite Pro L10, which won't work for some reason any.

  The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

  It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

  There is also a 30 second countdown if I do nothing the portable samekh automatically.
  It is, none of these things work.

  Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

  He did about 50 times now and still nothing.
  I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

  Help, please!

  If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

  hope this makes sense and I gave you all you need to know.

  Thanks, B

  It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
  If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

  In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

• Satellite Pro L10: Recovery disk is not available

  HELO,
  I lost my disc of recovery for Toshiba Satellite Pro L10.
  Service in Poland say my only: Toshiba do not have this disc now.
  am I to do now?

  I need to reinstall my system.

  Model number PSL15E-00x009PL, serial number 55016672W

  Sorry, my English is bad.

  Krzysiek

  Hello

  It s very strange because this device is not very old, and as far as I know you can order all recover cd. Toshiba should always have a copy of the CD or DVD. I can t believe that it s is not possible.
  I would recommend asking EPA again or to call other ASP in Poland.

  The second possibility is to install the OS from the Microsoft CD-ROM, and then install the drivers set and tools of Toshiba.
  Such Toshiba things you will find on the page of the Toshiba driver.

• Satellite Pro L10: sound card does not support Windows 7

  Hello

  I have a Satellite Pro L10 so I installed Windows 7 on my system, but my laptop cannot support Windows 7.
  I need sound card for Windows 7 update.

  The model of car audio is Conexant CX20468-31 AC97 Audio sound card.

  Please help me

  Hey Buddy

  What to say first of all that you will get not the official drivers for this laptop for Windows 7 or Vista.
  This laptop is oldie and I doubt that pilots will be released.

  By reading this forum threads I've noticed that most of the user using the driver on Win 7 OS Vista.
  Maybe you should google for Conexant AC97 Vista driver and should try a Vista on Windows 7 driver

  Good luck

• Satellite Pro L10 does not illuminate

  I have a Satellite Pro L10 and it stopped working yesterday. It won't turn on or charge up. No show of lights on the laptop when the charger is connected. I plugged in another toshiba charger but still no luck.

  Does anyone have ideas on what could be the problem with it and if it is easily resolved. The laptop is about 2 years old. Thanks for your help

  Hello

  Seems not beautiful it is maybe something wrong with the electronic power on the card mother s in this case the motherboard must be replaced to solve this problem

  But maybe you are a lucky guy and only the power adapter malfunctioning Yes, I know that you have tested the laptop with another power adapter, but are you sure that the second captain is supported?

  Anyway, in my opinion, nobody here can provide a solution exactly because without diagnostic tests we don t know what could be wrong
  This is why I recommend to contact the technician of the ASP for a help