Drivers for bus USB ThinkServer TS140 controller and SM bus controller

Similar Questions

• SM bus and USB drivers for HP Pavilion DV6 6024TX controller

  I just had to do a clean install of Windows 7 Ultimate 64 bit on my HP Pavilion DV6 6024TX laptop.

  I installed all the recommended and optional Windows updates and everything works * except * the SM Bus controller and USB controller - which are both showing yellow exclamation in Device Manager.

  I looked at the forums and it is clear that I have to install new drivers, but I'm not 100% sure * that * drivers to install.

  I know that this template contains * time * an accelerator of 6770 M graphics AMD Radeon * and * Embedded Intel HD graphics - and this is supposed to be switchable between the two, according to the profile of power it uses.

  I looked for the latest drivers on the AMD website and they * don't * switchable graphics support - see: http://support.amd.com/en-us/download/mobile?os=Windows 7-64

  This support AMD article returns me on the HP site for the best drivers: http://support.amd.com/en-us/kb-articles/Pages/737-28041SupportforATIMobility.aspx

  I looked at the download page of the HP driver for this model, so there are a few options: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=au&dlc=en&sw_lang=&product=5079...

  Did someone please advise I need the drivers and the best place to find them?

  Thank you.

  -JS

  You are the very welcome.

  Here is the link for the driver for the usb controller 3, you need.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100224-1&cc=us&DLC=en&LC=en&OS=4063&product=5079572&sw_lang=

• Drivers for ICH9 (Intel i/o Controller Hub) USB Host controller is exceeded

  Original title: ICH9 USB Universal Host Controller

  Hello

  The drivers for the following components exceeded in my laptop. I tried to look on the website of intel but impossible to find what. Help, please

  
  Intel(r) ICH9 Family USB Universal Host Controller - 2934
  Intel(r) ICH9 Family USB Universal Host Controller - 2935
  Intel(r) ICH9 Family USB Universal Host Controller - 2936
  Intel(r) ICH9 Family USB Universal Host Controller - 2937
  Intel(r) ICH9 Family USB Universal Host Controller - 2938
  Intel(r) ICH9 Family USB Universal Host Controller - 2939
  Intel(r) ICH9 Family USB Enhanced Host Controller - 293-a
  Intel(r) ICH9 Family USB Enhanced Host Controller - 293C
  Composite USB device
  USB mass storage device

  Thank you.

  Do you have questions? If everything works, no action is required. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How can I get the drivers for xp usb / get the device can run faster in the listed ports

  POP UP WITH SAYING HIS DEVICE CAN RUN FASTER IN THE PORTS LISTED, I HAVE THE WIRELESS CARD WIRELESS, MOUSE AND SPRINT U600, CONNECTED TO THE LAPTOP, THE PROBLEM JUST STARTED

  See the discussion of the difference between USB 1.1 and USB 2.0 and why this error message http://ask-leo.com/what_does_the_usb_device_can_perform_faster_mean.html
  If you have an old computer, you do not all USB 2.0 ports or some of your USB ports may be 1.1 e.a. 2.0

  Open the Device Manager (start > run > devmgmt.msc > OK) and expand the "Controllers of Bus USB" section by clicking on the + sign to the left.

  Are there warning icons? If so, provide details

  It will probably take several entries for "PCI to USB Host Controller" or similar terms.  Please report if one (or several) of these entries are for a "PCI to USB Enhanced Host Controller.  If none of the USB controllers is "strengthened", you do not have USB 2.0

• Error message: this operation requires an interactive window station while trying to install drivers for Microsoft Life Chat LX-3000 and Microsoft Wireless Mobile Mouse 6000

  Okay, so I bought recently when a helmet (Microsoft LifeChat LX-3000) and a mouse (Microsoft Wireless Mobile Mouse 6000) wireless, but my laptop Windows Vista Home Premium is having problems with the installation and execution of the drivers for these two devices.

  Original title: driver for headset and a wireless mouse will not install correctly

  I already had the Wireless Mobile Mouse 3000 and had no problems whatsoever doing this job, but I got it for at least a year I guess. I also installed the software that came with the CD (called Microsoft Mouse, even though it says on the CD Intellipoint 7.1) for the mouse and driver online for headphones (called helmet Microsoft) have also downloaded. However, when I plug in the devices, he's trying to find the drivers. Initially, it comes up with a window saying "New hardware found" and has the ability to "locate and install driver software", despite the fact that I already supposed to be installed the drivers through download programs or to use the CD.

  In any case, I select the "locate and install driver software" and it says "search Windows Update... «for 30 seconds or so, then said «Installing the driver software...» ».

  I then get a message saying "Windows has encountered a problem... etc... This operation requires an interactive window station. If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »

  If I disconnect and reconnect the device, I get the same situation with "new hardware found" and the options for search again...

  I tried both devices on another computer (Windows XP) and they manage to set up automatically even without the software provided on the CD or on the website and work perfectly well, however I need them working on my laptop ;)

  So I guess the main problem is that I get this message "interactive window station" preventing the drivers to install correctly. I have no idea what this means and have spent a lot of time trying to find them online.

  Well, I've resorted to re - install Windows Vista and installed very well both automatically when it is plugged.

  Now to reinstall all my programs... fun fun fun...

  Thanks for your help anyway!

• Windows 7 cannot install the drivers for my USB devices.

  Whenever I have connect my USB devices, windows is now impossible to install the unit. It shows the driver installation icon in the notification area and finally said failed. Devices are displayed in Device Manager with an exclamation mark in it. When I try to manually install the driver, it gives a prompt with error message "Windows found driver software for your device, but has encountered an error trying to install it." . The system cannot find the specified file. No idea why?

  Hi Halley,

  Have you tried another USB port?

  Please follow the steps to solve the problem USB drivers.

  Check the status of the USB in Device Manager:

  a. go to Control Panel - Device Manager.

  b. If you see a yellow exclamation mark next to the device, the driver is disabled and must be updated.

  Method 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2: Reinstall the USB controller:

  a. click Start, click run, and type devmgmt.msc.

  b. expand USB controllers

  c. right-click on each USB drivers and select uninstall

  d. restart the computer and Windows will automatically reinstall the USB controllers.

  Reference article

  Install a USB device

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  For more information:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Please post back with the result. If the problem is still not resolved, we will be happy to help you further.

• I need drivers for Toshiba USB DVB - T Tuner

  * Toshiba USB DVB - T Tuner *.

  * P/N PX12311E-1TVD *.

  Please if you can help me to answer me bye can e-mail address

  * thx *.

  I wonder why you didn t receive all the drivers and software package together this TV tuner device?  :|

  However, Toshiba drivers can be downloaded from this page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  There you have to choose from;
  Options of-> office-> TV tuner accessories

  There, you can choose between the hybrid USB TV tuner and DVB - T tuner.

  Good bye

• HP laptop, 2000 - 369WM: can not find the drivers for PCI devices or network controller

  I don't have a Notebook HP 2000-369WM. Just wiped the dive hard and installed Windows 7 64 bit and I can't find 2 drivers that I need. Controller and PCI network device any help would be great.

  Hello

  Please try:

  1 PCI: Card reader

  http://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52186.exe

  2. Wifi: Ralink 802.11 b/g/n WiFi Adapter

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56942.exe

  More drivers:

  http://support.HP.com/us-en/drivers/selfservice/HP-2000-notebook-PC-series/5145724/model/5171088

  Cordially.

• NEED WINDOWS 7 64 BIT DRIVERS FOR MY card audio HP M8226x and drivers nforce update

  Please help I really need these drivers

  Well, it was no help to you!  Sorry about that.

  Audio specification for computer is described as "8 channels high definition audio".

  1. Try to go to the download page for Realtek here - http://www.realtek.com.tw/downloads/
  2. Then click on 'High Definition Audio Codecs (software).
  3. Check the box "I agree to the above" and click 'Next' to go to the downloads page.
  4. Then try to click on one of the download links for "64 bit Vista, Windows7 driver only (executable file).
     (IttookafewsecondsbutitDIDstarttodownloadformeafter15to20seconds.)
  5. Once downloaded, install it and see if you have the drivers you need.

  I hope that gets your audio problem solved.

  Let me know!

• upgrade VM NIC drivers for a computer virtual once VMtools and HW version upgrade to version 7

  Hi people,
  I just wanted to know your opinion on the VM NIC driver update once the VMS migrate from ESX3.5 to ESXi4.1 and as I am course upgrade VMware Tools 4 to 7 HW version. Please let me know as
  as the current network adapter is E1000. Need to move the VM NIC as well?

  Thank you
  vmguys

  as the current network adapter is E1000. Need to move the VM NIC as well?

  Hello

  you don't have to

  1. upgrade Vmware tools
  2. upgrade from version HW - don't forget that with version 8 VM can run only on ESXi5
  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• WIN VISTA DRIVERS FOR VIA Vectro VT6212L - 4 ports USB 2.0 Controller

  Dear friends,

  I need WIN VISTA DRIVERS for VIA Vectro VT6212L - 4 ports USB 2.0 Host Controller. Win Vista can't recognize VIA VECTRO VT6212L - 4 - PORT USB 2.0 HOST CONTROLLER.

  Kind regards

  Giele
  India

  Hi GIELE,

  (a) on the computer which version of windows vista are you running?

  (b) if it works well before? Do you get any error message when you connect the device?

  I suggest you try the following steps:

  Step 1: Run the Fixit available in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  If the problem is not resolved

  Step 2: Connect the device to a USB port and a different test.

   

  Step 3: You can download the drivers for the USB WEB site controller, please click here

  For more information, see the link below:

  Install a USB device

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-USB-device

  If the problem persists, please contact your manufacturer for more information:

  http://www.via.com.tw/en/support/tech_faq.jsp

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need USB Controller drivers for my HP Pavilion g6 2235ca computer laptop running Windows 7 Pro 64 bit?

  Thus, it was at least a couple of months that I use my laptop with a single working USB port.

  The other two do NOT work. If I go to the computer in the start menu, make a right click on computer, and then click Manage, then I go to the Device Manager, there is a yellow exclamation next to the (USB) Universal Serial Bus controller.

  When I try to update, Windows 7 tells me that an update is not found blah blah blah...

  This problem has happened since I installed Windows 7 64-bit on 64-bit Windows 8.

  So, can anyone help me find the drivers for the USB controller? Or is it some sort of hardware failure or problem?

  Help, please? Any who...!

  Thank you!

  Hello

  Try to install the driver USB 3.0 on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55975.exe

  Kind regards

  DP - K

• Satellite Pro A120 and WXP - need drivers for USB and SD slot

  Hi guys,.

  I have a Satellite PRO A120 PSAC1E XP, I need to find the drivers for the USB port and SD memory card port.
  After reinstalling the operating system won't work.

  For USB, you need to install driver chipset and SD card, you must install SD Secure module and later the two SD utilities.
  Please download the Instructions of facilities and install all the stuff following this order of installations.

  If you have, so nothing can be wrong.

• env y 4 (DV4 5300) ID of Bus series universal usb 3.0 controller

  Hi all

  I received my new desire 4 DV4 5300 with windows 8. I decided to install Windows 7. Everything was installed successufully, but USB 3.0 controller (USB 3.0 ports on the left do not work).  I forgot to write down of the maid, the USB 3.0 controller model before I deleted Windows 8.

  Can you just reply with the manufacturer, the model of USB 3.0 or any USB controller in your dv4 5300 desire (Envy 4)?

  It does not matter if you're running Windows 8.  I just need the information to find the right driver for the USB 3.0 controller in Windows 7.

  BTW, install W7 was not really complicated.  Find the drivers was :-).

  Thank you.

  It's Intel usb 3.0 and you can try this driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104873-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278243 & sw_lang =

  There is another model that has drivers Win7 and Win8 posted. You need no driver usb 3.0 for Windows 8 as he took her "native" usb 3.0 support. Windows 7 not so... needs driver.

• From Windows 8.1 to Windows 7, my HP Pavilion e101sl 17 laptop lost the drivers for USB

  Hello guys, from 8.1 to Windows to Windows 7, my laptop HP Pavilion 17-e101sl lost the drivers for the USB controller, USB3 does not work, can someone help me please, thanks in advance

  Hello:

  Here is the link for the usb driver 3, you must...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1&cc=us&DLC=en&LC=en&OS=4063&product=6521489&sw_lang=

  Here's how to get the graphics to work when using W7 x 64...

  1 install the Intel chipset driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+ins...

  2. install the Intel graphics driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23714&lang=eng&OSVersion=Windows%207...

  3. download and install MS .NET Framework 4.0.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=17851

  4. download and install the latest amd catalyst driver beta.

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx