Drivers for PA3007U DVD Portege 7200 CT Network Dock II
Does anyone know how to get the drivers Toshiba PCI FastEther LAN on Docker II (the network DVD Dock II PA3007U) to work in Windows XP?
The NIC is a 3Com card, but it's device id (VEN_10B7DEC_E000) is not listed on the 3Com site.
The 3com card identifier does ' t detects the map well their logo is on the dock.
As far as I know that Toshiba will not support XP on this machine because it is too old. However, the brand of the network card in the set menu is
10/100 Ethernet 3COM 3C920 (3C905C-TX Compatible)
Take a look at the site of 3COM for the 3C905C drivers. Who can help.
After today's windows XP update of my CD - RW and DVD disappeared from the 'My Computer' list. When I go into the device manager that I have failed to load the corrupted or missing device drivers. I get an error code 39? Looking for a resolution, thanks JB
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
When you insert a CD or a DVD, Windows Vista may not recognize the disc
Your CD or DVD drive cannot read or write media - A Mr Fixit
CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
Drive CD - R or CD - RW Drive is not recognized as a recordable device
Hardware devices not detected or not working - A Mr Fixit
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
Hope these helps.
Rob - bicycle - Mark Twain said it is good.
Can anyone, please, help me? I could not install the driver for the dvd drive. I have vista ultimate 32 bit now, do a clean installation of which was preinstalled in my X 200 series new lappy.
Almost all of the drivers had been installed successfully, but for dvd player she always ends up saying "this application cannot be installed on this computer. The installer is now abandoned. »
Can someone please help me, what could be the reason? And also if someone could provide a list of the software that was pre-installed in the lappy would be appreciated. Thank you
I recommend you research a little in this forum rather than wait
The solutions have been posted already here:
First of all: I am a new user, just create an account; Greetings from Switzerland.
I'm looking for the latest drivers for my cd drive: DVD - ROM SD-R1312 and couldn't find on toshiba sites.
Does anyone know the correct link for downloads. Windows XP/SP2
Thanks for help
Hello Birke and welcome to the forum. ;)
In general there is no driver to be installed for the optical disc drive.
It will be much easier to help you if you explain what problem you have with optical disc drive.
I've tried everything and still need drivers for DV7-6C63NR:
SM Bus controller
also, I can't get my WiFi adapter to put on with the key on the keyboard - I think this must be my network controller, but I can't find the driver for it.
Can anyone help?
You need the driver for the wireless card that your model uses...
This driver is not found on the page of the driver and support for your laptop.
Where do you get a driver for a ts-l632h?
Bought this new dvd. Computer show everything is ok but the DVD will not work.
Would need a driver.
Thank you jimmy
This has nothing to do with a missing driver!
The Windows operating system contains a Microsoft own driver and you will find all drivers and as I said earlier, the driver is not required!
There must be another reason why the DVD will not work.
But just a question; What does that mean?
You are not able to view DVDs or cannot read DVD discs?
I could not find the following hardware ID
VEN_168C & 217f103c & rev_01 subsys dev_0036
VEN_10EC & 2192103c & rev_01 subsys dev_5229
ACPI\VEN_HPQ & DEV_6001
ACPI\VEN_ASD & DEV_0001
Thanks in advance
You need these drivers...
VEN_168C & 217f103c & rev_01 subsys dev_0036:
VEN_10EC & 2192103c & rev_01 subsys dev_5229:
ACPI\VEN_HPQ & DEV_6001:
ACPI\VEN_ASD & DEV_0001:
Determine if the driver I've attached under works. Install manually by downloading and unzipping.
Go to Device Manager and click on the device ACPI\VEN_ASD & DEV_0001.
Click the driver tab. Click on set to update driver. Select Browse my computer for driver software option, and navigate to the folder you unzipped.
Make sure that the include subfolders is selected and see if the driver will install. Then restart.
I need to deploy a number of HP printers on a network of Corp. (Laserjet P1102). Before I installed the printerdriver on all our Windows 7 32 bit of the PC, but the problem is on the first USB connection, printer stands as a "Fake" CD ROM drive, with the HP driver on this subject, but since all our users are not local administrators, they are not allowed to install the driver.
I am aware that I can change the mode USB printers to 'PrinterMode' via the 'SIUtillity.exe' (on the product CD), but I need a solution that allows me to change the USB mode mode silent (I can run as a script in the context of the SYSTEM), or a solution that allows me to change the printermode until the printer is delivered to the end user!
Thanks in advance!
Thanks, but as stated, I know the SIUtility.exe and now I finally found a solution to run the SIUtility in a script.
You can run the SIUtility.exe with the switch "/ disable" to disable the chip-Install of HP. (And "/ activate" to reverse). Found after a long search of Google:
SE Option 2!
After you have not used my laptop DVD for a while, forced to use my laptop, when my main unit was to return to a problem solved, that's when I noticed that the DVD drive is not working. Any help would be received with gratitude.
Check the Device Manager. Click Start and right-click computer. Click Properties, and then click Device Manager. Look to see if there is? or! next to the entrance of CD-ROM/DVD-ROM. If so, you can download the required driver from the manufacturer of your laptop and install it. If this isn't the case, who worked on your laptop may have accidentally disconnected the disk. If it has been less than 30 days since they worked on it, you could take and have them check it out, because they should warranty their work at least this amount of time.
I need help to find a way to correct or update the drivers for two DVDs that I have on my PC. Device Manager indicates that they are missing or have been corrupted, and they are a product of microsoft.
I tried to play a number of different disc, both DVD players and nothing seem to work.
Your CD/DVD drive is missing or is not recognized by Windows or other programs:
Your CD or DVD drive cannot read or write media - Fix It:
Original title: what to do now?
Hello! I'm trying to get my work wireless for vista, but it won't happen it tells me it cannot find the drivers for the control of the hierarchical network... what to do?
· It worked before?
Step 1: Try the procedure described in the following article:
Step 2: See also the article below:
I have a portege 7200 with the docker dock 2 dvd, no problems until this weekend, when it stopped starting.
its plugged into the power outlet and it starts the first windows 98 after the screen time, works my virus checker then the screen goes black, computer stops and the led on flashes.
ive tried to boot from a CD, using the battery, reinstall windows, all I can think about
Thanks for your help.
Have you tried to run the notebook without the docking station?
If this isn't the case, then try it.
Also, try to remove the battery for a while. Then try to start the unit only with the power adapter.
But generally, if the LED flashes then this means that there is a hardware malfunction.
The flash code can only be read by the authorized service partner. Guys are able to find the hardware failure.
Well well, in this case, if the procedures described above don? help I recommend you contact Toshiba service partner in your country.
I have Dynabook CX1/214LE model Portege 4130 series.
I need drivers for the new facility. Where is possible to download? On the Web from Toshiba site are not.
You must understand that there is not some sort of Toshiba global support and download page. That is why if your laptop is designed for the Japanese market so only is this laptop backed on to the Japan Toshiba support page.
This laptop model is not available in Europe, and you won't find drivers on European support page. So either try to use drivers for some similar Portege model or directly check the download page for equipment manufacturers.
I searched the forum for a solution to this problem and didn't see anything for my particular model.
I gave to Windows 8 a relatively long test - about 2 weeks. Hatred is not strong enough a Word. I "upgraded" to Windows 7 Ultimate 64-bit. I have problems to find drivers.
I have no drivers for the cable or the wireless network connection, so I'll have to ask that question of my aging Dell.
I'd appreciate any help I can get.
You are the very welcome.
Try the Intel directly to Intel graphics driver
https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 3712 & DwnldID = 22842 & ProductFamily = Graphics & ProductLine = Laptop + graphics + drivers & ProductProduct = 3rd + Generation + Intel % c2% ae % e2% 84% a2 Core + Processors + with + Intel % c2% ae + HD + Graphics + 4000 & lang = eng
Audio... try this one:
http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5082183 & swItem = ob-94604-1 & prodNameId = 5111939 & swEnvOID = 4063 & swLang = 13 & taskId = 135 & mode = 5
The PCI device is the one.
The USB\VID_138A is this one.
Try this one for the 6007:
Try the wired directly from realtek network driver. a 5th on the list.
Please any lawyer how to drive contrast and brightness for laptop Toshiba Portege 7200 with system Windows_XP
First of all thank you
For as far as I know the Portege 7200 shipped with Windows NT 4.0, Windows 98, and Windows 95.
Maybe you are looking for
Hello I just bought a Satellite Pro U300, but after the finalization of the recording of the laptop, I always get the icon in the tray - toshiba notification - sign up for my laptop. When I accept, I have already all the information for my registrati
Currently, we use licenses based on computer for our products. For some of our users who work disconnected, we eat two licenses. We are therefore contemplate pass them to a schema license based on the user for some of our products. I found documen
I use a 12 unidex by aerotech motion controller. My labview program worked well, my motion controller when all of a sudden he couldn't find it. I went measures and tab automation looking for him, but he could not find the controller. The program h
Windows 7 supports my old pc game. "Gears Of War"?Well, I heard that if I've upgraded to Windows 7 Professional edition, I would be fine using "Gears Of War".Is it true or not?
I currently have a problem where my CPU stands at 90% to 100% when the charger is removed from the laptop. He immediately rises despite no process running. When the charger is placed back in the CPU of the laptop is usually highest at 2%-5%. The oper