Drives hot swap in BIOS not safe to remove the value
I have a Doc Icy as the docks of the internal disks in a Bay with two power switches front of 5.25 inch front - one for the 2.5 inches dock bay and one for the Bay dock of 3.5 inches. In the last inserted here readers as well as internal hard drives would come in safe to delete list. Apparently a Win 7 update fixed the internal drives appear. Now, even if for the ICY Doc SATA ports are on hot swap in the BIOS, they still do not appear in the delete list safe, which means that the superior policies drive removable section don't appear in the tab Device Manager strategies as they did and still do for USB drives.
I found here in the forum a few lines of registry added to disable records showing in safe to delete the list, so I wonder if there are a few lines or a tweak for these lines to get two ICY DOC SATA ports to appear in Safe to remove - or y at - it another way?
Here's the instructions to Remove readers of safe to remove from the other post by Bobby Mikkelson.
1. click on Start
2. in the search programs and files box, type the command
3. under programs, click command prompt , click run as administrator
If you are prompted for an administrator password or a confirmation, type the password or click on continue.
4. copy and paste or type each of the commands at the command prompt and press enter after each command
Reg.exe add "HKLM\SYSTEM\CurrentControlSet\Services\msahci\Controller0\Channel0" / f/v TreatAsInternalPort /t REG_DWORD /d 0x00000001
Reg.exe add "HKLM\SYSTEM\CurrentControlSet\Services\msahci\Controller0\Channel1" / f/v TreatAsInternalPort /t REG_DWORD /d 0x00000001
5 restart your computer to activate the registry changes
Note: There may be some trial and error to determine the appropriate ports (also called "channels").
The number of channel indicated in the device maybe Manager may not match the channel number in the registry, you may need to set the value and check the desired effect.
There is currently no entries like this in HKLM\SYSTEM\CurrentControlSet\Services\msahci\
In case it is not clear - I WANT that drives DOC ICY appears in safe to remove.
Win 7 Pro 64-bit
ASUS Z87.-A.
All drivers and updates to the operating system to date.
Hello
Your question is better suited for TechNet where experts on this platform will help you better, please post your request in the Sub forum:
https://social.technet.Microsoft.com/forums/en-us/home
Hope this information helps, for assistance please answer.
Tags: Windows
Similar Questions
-
I have a new win 7 and have a lot of trouble installing an HP laserjet printer.
When you try to remove the drivers under properties of the print server, I get the following message:
"Cannot remove the HP LaserJet 1020 driver. The specified printer driver is currently in use.
Impossible to remove the hplj1020.inf package. Access is denied. »someone knows what's the problem? the prnter is not yet connected. Must not be in use. The problem I had was that the stuff sent to the printer seems to sit and take 15 ins to print a test page.
How can I remove the drivers?
Stop the print spooler service, and then start the print spooler service. Now, delete the print driver and packaging. Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1
-
Redesign existing external hard disks and still 6 Lightroom able to find existing photos.
I currently store my pictures on and an external hard drive. Lightroom 6 was not able to find the picture momentarily files. I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos. I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive. However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop. I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet. I would like to turn an external hard drive on a strong letter, warns we hope this previous problem. My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo. It would take more time than I'd like to lose. Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?
I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.
Any help would be welcome.
Thank you!
So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)
Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)
-
After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then lets refresh the USB stack
Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
all except the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problems------------------------------------------------------------------------------------------
If no joy, see Toshiba Support and/or their forums:
Toshiba support and drivers
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba Support Forums
http://laptopforums.Toshiba.com/Contact Toshiba
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactI hope this helps and happy holidays!
Rob - bicycle - Mark Twain said it is good. -
I have 5 "MY BACKUP" folder on my drive C in 2008. How can I remove the old ones. Receiver error MSG "Access denied" when you try.
Hi PJG_918,To resolve this problem, you must turn off Simple file sharing and then take over the folder.Here is an article that will explain the procedure to the same thing: -
is it safe to remove the old windows updates
Is it safe to remove the old updates in Windows Vista?
Generally, no.
You can use the program compcln.exe to remove the Service pack files and to perpetuate a service pack, as described here:
http://support.Microsoft.com/?kbid=2592038
This program is in C:\Windows\System32
You can uninstall the updates that have been replaced by a later update, but I don't know of an easy way to identify them. I don't think that in doing so, there is a great advantage.
If you uninstall an update that is still necessary, he will be released the next time that WIndows Update is running.
-
Cannot download pictures from my digital camera. I've been able to do recently. Happened several times, I tried the computer shows small icon at the bottom right it is now safe to remove the removable storage device E. I recently changed my virus protection providers. This could be the problem or is it a problem with my computer?
Hi FrankieLastname,
Check that the automatic run settings are correct:
- Click on the Start orb
- Select Control Panel
- Select auto play
You should see the card reader that you use for the Sandisk under devices. Select the action you want to take in the drop-down list.
-
Why is it not possible to remove the background in photoshop? I want to see the finder when I work in Photoshop.
Hello
I'm assuming you use PS CC 2015 and Mac
Open PS, click window - frame of the Application.
Concerning
Assani
-
Ouch. I just started to do some Win Phone 8 and development Win, and all simulators are needed for development.
This means that a dev to Win8 may only work on their host... I'm sure it would work in a virtual machine.
Can I make for happy? (Hyper V might have to win here... sigh).
VMware Workstation and Hyper-V are not compatible. Remove the Hyper-V system role before running VMware Workstation
Once you install the Hyper-V role on your host, your host is no longer running Windows 8 as the native operating system. It runs Hyper-V as the native operating system, and Windows 8 runs as OS management within a privileged under Hyper-V VM. With the Hyper-V role installed, * everything * runs in a virtual machine under Hyper-V.
So to run a virtual machine under my computer in Windows 8 under Hyper-V, you must be able to run a nested VM. It's possible with Hyper-V, the hypervisor host, but with the updates in custody, I mentioned above.
-
Not able to get the value of the type defined in the other program
Hi all
I have create a type in a single package spec (Globally), now I'm using the same type in another package. Simply I'm calling the first package and try to store the value in the Type and use the same type in the second package.
But I'm not able to get the value
Type declaration
Declared in package Spec TYPE t_aa_derive_tbl_type IS TABLE OF xxxx%ROWTYPE; t_aa_derive t_aa_derive_tbl_type;
Package 1
Package1. PROCEDURE name( some parameters); is Cursor c1 is Select * from dual; begin OPEN c_aa_derive; FETCH c_aa_derive BULK COLLECT INTO t_aa_derive; CLOSE c_aa_derive; END get_aa_derive;
In my second package
I'll call you
Package1. PROCEDURE name( some parameters); and then i am trying to for i in 1 .. package1.t_aa_derive.COUNT LOOP .... .... ... end loop;
I can not entered the loop for some reason any.
Could someone guide me if anything I missed.
See you soon,.
San
And what did you like refcursor c_aa_derive in the call to package1.name? Is it returns all rows? If this isn't the case, COUNT will be 0.
SY.
-
Do not release after removing the external hard drive of drive letters
Hello, I'm having a problem where 1 of my external hard drives, lost its drive letter so I he reassigned another letter after doing so, the drive letters released (reset to available) once I deleted the drive I have now 5 drive letters in my computer that is unusable and not visible in disk management. So now I need a way to reset the drive letters F G H I J back to available for use please. Here some screenshots to better understand what I got.
OS: Windows 7
of the information system
Drive F:
Local fixed disk description
Not available Tablet
File system is not available
Size not available
Free space is not available
Volume name is not available
Volume serial number is not available
G: drive
Local fixed disk description
Not available Tablet
File system is not available
Size not available
Free space is not available
Volume name is not available
Volume serial number is not available
Drive H:
Local fixed disk description
Not available Tablet
File system is not available
Size not available
Free space is not available
Volume name is not available
Volume serial number is not available
Drive I:
Local fixed disk description
Not available Tablet
File system is not available
Size not available
Free space is not available
Volume name is not available
Volume serial number is not available
J: drive
Local fixed disk description
Not available Tablet
File system is not available
Size not available
Free space is not available
Volume name is not available
Volume serial number is not available
Q: by car
Local fixed disk description
Not available Tablet
File system is not available
Size not available
Free space is not available
Volume name is not available
Volume serial number is not availablethe disk management
found the fix but tried before and nothing so if you have this problem too, you may have to try a few times at most 2 before finding another fix
found a right quick way to avoid typing it
- Run the command prompt as administrator , and run the following commands
Chkdsk /r /x
(Check a drive for errors and recover readable information.)
- Press Y to perform verification on the next launch upward and reboot your PC.
- Let CHKDSK finish
then check if the problem has been resolved
- Run the command prompt as administrator , and run the following commands
-
Is it safe to remove the service paks
Once the service paks are downloaded is it safe to remove them from compartments of download with the add-in and remove the program to secure space?
You should not remove the Service Pack, but you can store if you wish (noting once you've done that you don't ' be able to uninstall service packs).
See:
Cleaning after installation of SP2
http://aumha.org/win5/a/sp2faq.php#afterand/or
XP SP3: Post Installation Cleanup
http://aumha.NET/viewtopic.php?f=62&t=33827Please note this is only for Windows XP and is not on Vista or Windows 7
Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
In the manual, it says that sansa fuze can be removed safely after the transfer of data over completely, when I used Windows Media Player, after synchronization finished, there is a msg 'You can dissconnect sansa fuze now', it convinient, but I do not use windows media player, I use MediaMonkey instead, and there is no message to confirm when it is safe to dissconnect the player at the end of the process synchronization, so how can I be sure what - it really to the shelter to dissconnect the player? There is no icon to safely remove the player, there is no guarantee that my security suites is not access the device in the background thanks
paleskin wrote:
The only thing that appears when I click on my usb icon is "to remove my usb wifi atheros', not rocket, I guess he's in then, mtp mode since I put the usb in the rocket setting 'auto' mode, so I have to check my icon usb, what he whether or not written, if it's not, then it's in mtp mode , so just pull him out, but if it appears, use them safely remove fuze, whenever I want to disconnect from the computer, very little practice, makes me think of my old creative zen touch before the firmware updateYou should not use mode auto-defaut... Select MTP or MSC, whatever suits your needs, but auto brings right on the confusion and frustration.
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hi Rockeye55,
If I understand well you are unable to read CDs\DVDs on your windows vista computer, and you have already tried to remove the upper and lower filter to correct this problem, correct if I understood you.
I would like to clarify some things to refine the question
(a) this happens with all CD and DVD or just the Office CD?
(b) don't you recall making any changes to the computer before this happened?
(c) what happens when you try to remove the filters? You get the error message?
When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:
Step 1: Search for any displayed error message
1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2. in Device Manager, look for the ligthscribe ROM drives, and then double-click the device name.
3. If an error code has been generated, the code appears in the status area of the device under the general tab
Step 2: You can try again to remove the upper filter and lower, just run the fixit available in the link below
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/314060
Let us know if it works
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
It's a curve 9320, I bought two weeks ago. There is no data plan, I just use our WiFi at home.
My curve has moments where it freezes so none of the buttons work (including the off button). Sometimes, he thaws when I plug in the charger and other times it doesn't. When this happens I let battery short of energy and load it, then that's fine for a while. It takes time, so I wonder if it is safe to take out just the battery? Or it's a bit like hard - boot a computer when it is not good for the system?
Recently, he was freezing when I go into my text messages. I know that this is not a memory problem, I remove messages after I finished a conversation. And I'm not a very conversational person in the first place. XP
Yes, do a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.
Maybe you are looking for
-
No idea how to create this animation in Apple Motion?
I don't mean to recreate this, exactly the kind of radio wave effect where the circles to life outside while fading in the centre and on the outskirts. I don't know it can be done with a simple circle and the Replicator but I just can't work, all adv
-
How can I recover my password of e-mail and my facebook password?
How can I recover my friends email address password?
-
where can I install outlook express for windows xp I deleted by mistake it.
I do stupid things sometimes and this time I deleted outlook express with the Add/Remove programs. How can I get it back?
-
Unable to download the Word Viewer
has had to reload windows xp home edition. now I can't download windows 2007 documents Viewer. Any suggestions? I had to reload windows xp home edition after setting a blue error screen. Now, I can't properly download windows 2007 documents Viewer.
-
Select VIEW tab is programmatically
Is it possible to select the VIEW tab, using a script? For example if the end user has a different tab selected in DIAdem (for example, the BROWSER or SCRIPT tab) the script selects the VIEW tab. Thank you