DRM using AscNode property

Similar Questions

• How to change the value of the array element by using the property node

  Hello all :)

  IM using a table in the drop-down list box. the size of the array is not fixed.

  I want property strings [] from the drop-down list box to enter text in selection, but since I placed it inside the table im unable to use this property.

  I used 'arrayelem' reference property and property node connected to it but got no strings [] in the selection.

  so is it possible that I can use property strings]

  
  

• Would it not correct to say that the PCI-6110 can be set to 'redeclenchables' but the PXI-6115 module cannot use this property?

  Would it not correct to say that the PCI-6110 can be set to 'redeclenchables' but the PXI-6115 module cannot use this property?  If Yes, where is it documented the series cards can do trigger?  For example, is it possible to configure the trigger on the PXI-6124?

  Hi Joel_Neptune,

  The PCI-6110 and other materials as the PXI-6115 S series and SMU-6124 do not natively support NOR-DAQmx analog input alarm. However, you can use one of the generalist counters/timers of the Council to generate a reenclenchees pulse train, then use this as the sample clock pulse train. This transportation example shows how:

  LabVIEW\examples\DAQmx\Synchronization\Multi-Function.llb\Multi-Function-Ctr Retrigg Pulse Train generation for the Clock.vi sample

  In addition, the new material of the simultaneous sampling X series are supported trigger analog input without using a separate task of counters/timers.

  Brad

• Can I use charger property on a main sequence to load the properties in the subsequence?

  Hi, I tried to use the shipper of the property to load limits and variabels local values in subsequences of the main sequence.

  I can export all properties for my main sequence and all subsequences in the export function within selecing .

  When I try to load the file exported by using the property loader I get different errors depending on the format, with that I imported/exported.

  For the error of iget text files or csv-17100

  "The file format is incorrect near 'StationGlobals' section.  Make sure you use start and end markers correctly. »

  To get an xl format I get error - 18

  "Stage of charger property has no import or export properties.
  310 property values have been found.

  43 property values were imported from 920 or lines of data.

  There is no where close to 920 data lines or 320 properties in the file exported.

  If I use the property loader to load the properties to just hand it works very well, is it extra formatting that I do for the file before you import it or is it not possible to load the properties in a subsequence of a property to hand charger?

  
  

• Why can I not format my text in a cell in my table using the property Panel

  If I use my property Panel to adjust my table it will then apply my changes, but when I click in a cell and try to move my text to the Center or add color it does not apply my changes.

  Does anyone have any idea why this could be please

  Oh my God, I got it back, I had deleted a hug!

• BCC works not when using custom property accessors

  Hello

  In the integration of the ATG-short, I try to use "custom property accessors" in my "product-sku-output - config.xml". I'm including the sub modules in the classpath of build.xml.

  < dir = "${dynamo.home}" / fileset... / DAF/Research/Base/lib ' > "

  < name = "" * / *.jar "/ >"

  < / fileset >

  < dir = "${dynamo.home}" / fileset... / DAF/Search/Index/lib ' > "

  < name = "" * / *.jar "/ >"

  < / fileset >

  When I Isaiah to compile the project, these modules have been included in my atg_bootstrap.war of the file .ear as '/atg_bootstrap.war/WEB-INF/ATG-INF/DAF/Search/Index/'. However, when I start the server, in the instance server log merchandising get the below error and for this reason the server has been stopped and cannot access the BCC.

  I try to use the custom property accessor class - PropertyAccessorImpl

  2013-07-03 11:04:46, 418 INFO [STDOUT] Configuration directory (principal) or the /var/jboss/versions/jboss-eap-5.1/jboss-as/server/merch/deploy/ulta.ear/atg_bootstrap.war/WEB-INF/ATG-INF/DAF/Search/Index/configlayers/stagingandprod/config.jar file does not exist or is not readable

  2013-07-03 11:04:46, 903 ERROR [STDERR] java.util.zip.ZipException (principal): problem opening /var/jboss/versions/jboss-eap-5.1/jboss-as/server/merch/deploy/ulta.ear/atg_bootstrap.war/WEB-INF/ATG-INF/DAF/Search/Index/configlayers/stagingandprod/config.jar zip file: error in opening zip file

  2013-07-03 11:04:46, 904 ERROR [STDERR] (principal) at atg.vfs.zip.ZipFileSystem. < init > (ZipFileSystem.java:124)

  2013-07-03 11:04:46, 904 ERROR [STDERR] (principal) at atg.vfs.zip.ZipFileSystem. < init > (ZipFileSystem.java:97)

  2013-07-03 11:04:46, 904 ERROR [STDERR] (principal) at atg.vfs.zip.ZipFileSystem. < init > (ZipFileSystem.java:142)

  2013-07-03 11:04:46, 904 ERROR [STDERR] (principal) at atg.nucleus.ConfigurationFileSystems. < init > (ConfigurationFileSystems.java:124)

  2013-07-03 11:04:46, 904 ERROR [STDERR] (principal) at atg.nucleus.ConfigurationFileSystems. < init > (ConfigurationFileSystems.java:244)

  2013-07-03 11:04:46, 905 ERROR [STDERR] (principal) at atg.nucleus.Nucleus.createConfigFileSystems(Nucleus.java:1827)

  2013-07-03 11:04:46, 905 ERROR [STDERR] (principal) at atg.nucleus.Nucleus. < init > (Nucleus.java:842)

  2013-07-03 11:04:46, 905 ERROR [STDERR] (principal) at atg.nucleus.Nucleus. < init > (Nucleus.java:766)

  2013-07-03 11:04:46, 905 ERROR [STDERR] (principal) at atg.nucleus.Nucleus. < init > (Nucleus.java:747)

  Please help me to solve this error.

  Thank you

  There is typo in the ATG installation that creates this problem.

  For example, change the file C:\\DAF\Search\Index\META-INF\MANIFEST. MF

  ATG-StagingConfig-path: configlayers/stagingandprod/config.jar

  Peace

  Shaik

• How to change the color of the elements of a digital picture (separately) programmatically by using the property node?

  For example, I have 3 digital controls, controlling 3 digital array elements (digital control is connected directly to the indicator). So if I change value in digital control 1, then the table item # 1 of the digital table should blush when the value is greater than 5. Similarly when I change NUM controls 2 item 2 of the table should turn red when the value control num 1 exceeds 10. Similarly for the 3rd element. In other words, I want to control the ownership of the elements of the array individually through the digital command separated.

  I did it for unique digital indicator.i.e. When I change the values of the control, then a single digital indicator changes color (text digital property BG) and with table values, changes the color of the entire table, but I want to change the color of the singles of the table element.

  Please help thanks.

  I hope you do well! You cannot change the properties of elements of an array. What you could do instead is probably using a table where you can change the background color of a cell?

• How do I dynamicaly create TestStand properties when loading the limits of an Excel file using the property loader?

  Hello

  I need help using the shipper of the property. I have an excel file that contains a bunch of properties, and the properties change quite often. I want to be able to load a picture of the excel file properties by using the shipper of the property and create these properties in Teststand programmatically. It is a sample of the file I want to import: when I tried the charger of the property, I got an error, because the properties did not exist. So, how can I create them as they load?

  LIMITS OF DEPARTURE
  	Value of the variable
  	Value of the variable
  LowLimits	10 20 30
  PinNumbers	0 1 2
  	Value of the variable
  LIMITS OF THE END

  Thank you

  Ayman

  Thanks Ric, Ray. Both of your comments, I was able to do that the tool works exactly as I want. The final version of my custom tool is attached.

• Not (rightly?) MDS Simulator using rimpublic.property

  I'm testing an application that manages cookies on its own, so I tried to change the rimpublic.property parameter:

  application.handler.http.CookieSupport = false

  but the MDS Simulator still manages cookies.  I then changed the value of WebServer.listen.port to 8010 and the MDS Simulator still load the web server on the default port 8080. This suggests that the MDS Simulator is not correctly read the file rimpublic.property. Initially, I had problems of file with Vista so I changed the permissions on everything under the directory "C:\Program research in Motion\BlackBerry JDE 4.7.0\MDS" so that all users have all permissions. That always has not contributed to the problem though. Anyone has ideas or information, why this is happening?

  I'm v4.7.0 JDE running and modifying this file specifically:

  C:\Program search in Motion\BlackBerry JDE 4.7.0\MDS\config\rimpublic.property

  Thank you

  Joe

  Well well if someone has the same problem, I managed to get this to work finally.

  I reinstalled everything - the JDE, all my simulators and the JDE component Package (this can be unnecessary, given that I didn't tried the next step until after I did - twice). Then in the JDE, I put the directory of MDS Simulator - CS to use the version installed by the Installer component package to 'C:\Program research in Motion\BlackBerry JDE component package 4.7.0\MDS' (Edit-> preferences, tab Simulator MDS - CS). I also had to change the properties of that directory and give total control of the users group. And of course the rimpublic.properties file is now in the directory "C:\Program search component Package Motion\BlackBerry JDE 4.7.0\MDS\config".

  It works, but one of the problems is that the instance of MDS - CS turns off automatically when I close the Simulator. But I can live with that.

• The use of property in filters filters/range record geocode

  Hi all

  We have created a property called 'Place' to data type as "Geocoded" and we are able to use the same sort. And this will generate two dynamic properties by the name of "Kilometers_to_Location and"Miles_to_location". Is it possible to use these dynamic properties in our Records filters or filters in the range? We have obligation to filter products based on say less than 100 kms, 1000kms of the user's location and the sort not only on this basis.

  All the suggestions/help is appreciated.

  Concerning

  Shreyas

  Sarah,

  To answer your initial question, two dynamic properties geocodes are not persisted and are intended for informational purposes only (as show on a page in the user interface). However, you can use geocodes with filters in the range, then it could solve your problem. For more information, see Chapter 8 ("using line filters") in the "Basic Development Guide, available here:

  http://docs.Oracle.com/CD/E40176_01/MDEX.641/PDF/BasicDevGuide.PDF

  P.S. This is the forum for information discovery (MDEX, 7). You probably want to post on the OTN short experience Management Forum:

  https://forums.Oracle.com/Forums/Forum.jspa?forumid=1406

  Frank

• custom validator does not use the property

  Hello
  
  I need a validator that validates the entries based on a search in a database. So I created a class that implements the validator. I also inject dao via the property in faces - config.xml, but I do not see the method is called, even if it's public. So I get a NullPointerException on the validate method. What I am doing wrong?
  
  <>validator
  my.customValidator < validator-id > < / validator id >
  > class validator < org.company.jsf.validator.CustomValidator < / validator-class >
  < property >
  > property name < theDao < / property-name >
  > class property < #{theDao} < / class property >
  < / property >
  < / validator >
  
  Thank you
  Dave

  I expect 'property-class' classname real being with a complete package of your DAO. It is not a managed bean named "theDAO" JSF, so you can't inject. But why not just build in your support bean, I wonder?

  If it's really a JSF managed bean somehow, you would inject it like this:

        
          theDAO
          #{theDAO}
        
  

  So, using the value attribute.

• How to size of ImageView using scaling property

  Hello

  I use Imageview to display images that are active, I want to resize them, I tried to use image resize using the scale in c ++. I am not able to do, how to do?

  Is it possible outside the scaling of method?

  Concerning

  Rakesh Shankar.P

  Quick and dirty example:

  ImageView * iv = new ImageView();
  iv->setImageSource(QUrl("asset:///fooo.png"));
  iv->setScalingMethod(ScalingMethod::AspectFill);
  iv->setPreferredSize(768, 1024);
  

  In practice, you'll want to load the image using ImageTracker, wait for the signal that it has loaded, and then set Image on imageview. ImageTracker you can also read the dimensions of the Image.

• How to use the property PivotX and PivotY in cascades

  Hello

  My goal is to rotate the line on my angle.

  

  1 I received two points: A(x1; y1) and B(x2; y2).

  2. I calculated the size of the vector AB and angle of point A:
  AB = Math.sqrt (Math.pow ((x2-x 1), 2) + Math.pow ((y2-y1), 2));
  Alicia = 44 *.

  3 I put in place the line on the terms of coordination (width = AB, height = 3px):
  myLine.layoutProperties.positionX = x 1;
  myLine.layoutProperties.positionY = y1;

  4 I turn the line on the angle that was found.
  The starting point of the line must be the point A, endpoint - point B. But I have no =)
  I try to use the rotationZ, but I do not know how to work with his propertyes PivotX and PivotY.
  Default 0 PivotX and PivotY = 0. When I try to set up PivotX = x 1 and y1 = PivotY I get the incorrect result.

  With PivotX = 0 and PivotY = 0 I get it (myLine.rotationZ = 44):

  

  Please, help me =)

  That could happen, because the pivotX and pivotY zero definition makes the rotation around the center of the element. In the case of this image, which is equal to its center point (300, 1.5), but no, it is top left. Try to set the pivotX to-(image.width/2), which will be:-300; pivotY to the-(image.height/2), which is - 1.5; and then turn again.

  Please see the details on this subject here:

  http://developer.BlackBerry.com/native/reference/Cascades/bb__cascades__visualnode.html

• Getter ActionDescriptor: cannot use the property for nested descriptors?

  When you retrieve an ActionDescriptor, as the application, we received the order to precede the property which we are interested, as we do not get the descriptor of the entire application, but only the bit that we really need:

  // DON'T
  var ref = new ActionReference();
  ref.putEnumerated( charIDToTypeID("capp"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") ); 
  var applicationDesc = executeActionGet(ref);
  var theInterpolationMethod = typeIDToStringID(applicationDesc.getEnumerationValue(stringIDToTypeID('interpolationMethod')));
  alert (theInterpolationMethod);
  
  // DO
  var ref = new ActionReference ();
  ref.putProperty (stringIDToTypeID ("property"), stringIDToTypeID ("interpolationMethod")); /* <-- ADD THIS */
  ref.putEnumerated (stringIDToTypeID ("application"), stringIDToTypeID ("ordinal"), stringIDToTypeID ("targetEnum"));
  var interpolationDesc = executeActionGet (ref);
  var theInterpolationMethod = typeIDToStringID (interpolationDesc.getEnumerationValue (stringIDToTypeID ("interpolationMethod")));
  alert (theInterpolationMethod);
  

  So far so good.

  Problem is that this putProperty only works when you are looking for a value such as Integer, String, Boolean, and enumeration. If you need to get a handle nested as 'currentToolOptions', this does not work:

  // FAILS
  var ref = new ActionReference ();
  ref.putProperty (stringIDToTypeID ("property"), stringIDToTypeID ("currentToolOptions"));
  ref.putEnumerated (stringIDToTypeID ("application"), stringIDToTypeID ("ordinal"), stringIDToTypeID ("targetEnum"));
  var desc = executeActionGet (ref).getObjectValue (stringIDToTypeID ("currentToolOptions")); // FAILS here
  desc;
  
  // WORKS
  var ref = new ActionReference ();
  // ref.putProperty (stringIDToTypeID ("property"), stringIDToTypeID ("currentToolOptions")); // Removed the prepended property
  ref.putEnumerated (stringIDToTypeID ("application"), stringIDToTypeID ("ordinal"), stringIDToTypeID ("targetEnum"));
  var desc = executeActionGet (ref).getObjectValue (stringIDToTypeID ("currentToolOptions"));
  desc;
  

  ... and you get the descriptor of the entire application (bad for performance), and then extract the bit you want.

  Someone has any idea why is this so, or in the case where how to properly add the property for DescValueType.OBJECTTYPE?

  Thank you!

  Davide

  Hi Davide.

  A property of the nested object extraction is usually not a problem. Unfortunately, there is a bug for options of the current tool in CS4, and it seems that it is still there in later versions.

  -Get directly the property of 'currentToolOptions' triggers the error: "the Get command is not available"!

  -Get the property declarations "tool" * two * properties "currentToolOptions" and "tool"!

  var ref = new ActionReference ();
  ref.putProperty (stringIDToTypeID ("property"), stringIDToTypeID ("tool"));
  ref.putEnumerated (stringIDToTypeID ("application"), stringIDToTypeID ("ordinal"), stringIDToTypeID ("targetEnum"));
  var desc = executeActionGet (ref);
  alert (typeIDToStringID (desc.getEnumerationType (stringIDToTypeID ("tool"))));
  alert (typeIDToStringID (desc.getObjectType (stringIDToTypeID ("currentToolOptions"))));
  desc = desc.getObjectValue (stringIDToTypeID ("currentToolOptions"));
  

  HTH,

  -Michel

• How can I use the property of a node that is not related in a formula?

  Hello Experts,

  I need help with a formula.  I want to set a property 'Y', according to the following conditions:

  Node = XX_1234 - this is the node whose property we want to update 'Y '.

  Node = 1234 life elsewhere in the same hierarchy.  1234 node has a property called Custom.XX_Account and under certain conditions this property can be null, or it can be "filled with XX_1234 in the case of my example.

  I want to set the property indicator = 'Y' for node XX_1234 when Custom.XX_Account property node 1234 = "XX_1234."

  I know that substring off the "XX_' of my node (XX_1234) but I don't know how to find a property to another node (not related).

  Help and recommendations are greatly appreciated!

  See you soon!

  Hello

  I think that after reading your two previous posts on PQRS account (where P, Q, R, S are many) you have a XX_Account property (where XX_ is a fixed prefix?) and this property can have only two values (NULL or XX_Abbrev()).

  If (and)

  Equals (String, SUBSTRING (ABBREV (), 1, 3), XX_),

  NodeInHier (SubString (Abbrev (), 4, PropValue (Core.HierName), Length (Abbrev (())))).

  If)

  Equals (String, NodePropValue (Substring (ABBREV (), 4, length (ABBREV (())), Custom.XX_Account), ABBREV ()),

  THERE, XXX))

  (Where XXX is the Else condition you specify wana)

  I'm hoping to have read your request correctly and it helps.

  Thank you

  Denzz