Pavilion 500-123w (H6U69AA): HP 500-123w OEM DVI - I to VGA HF

Similar Questions

• Turn on two HP Pavilion 500-319na DVI ports

  I just bought a HP Pavilion 500-319na which has been described as having 1 x HDMI, 2 x DVI video interfaces.

  The GeForce GT 705 nvidia graphics card has 1 x HDMI, 1 x DVI taken

  The motherboard has also 1 x taken DVI which was capped with a small piece of plastic with "do not remove" on the subject.

  After advice from PC World, I removed the plastic and tried the DVI socket mother who did not work.

  Is there a way of making the motherboard DVI to work in parallel with sockets of graphics cards.

  Finally, I would like to run two monitors from the DVI Sockets at the same time and have the HDMI enabled.

  This is my first Post ever anywhere so apologies if there is not enough information.

  See you soon

  RSPII

  Please provide the full brand and model, for both monitors information, you try to connect to your computer.

  Based on the specifications of your desktop HP Pavilion 500-319na, this model has a VGA port (analog only) integrated and an integrated port DVI - D (digital only) as shown below (please NOTE: embedded video is not available if a graphics card is installed);

  

  #4-VGA (analog only) # 5 - DVI - D (digital only)

  Please replace the plastic cover that you previously deleted. There is no way to activate the video ports built-in, although a discrete video card installed.

  NVIDIA GeForce GT 705
  DVI (dual-link) resolution: 2560 x 1600 x 32bpp at 60 Hz
  HDMI resolution: 1920 x 1080
  VGA (via dongle) analog resolution: 2048 x 1536 x 32bpp at 60 Hz
  Support of up to two displays at the same time.

  There are several ways to connect monitors to your computer, but you can use two ports on the NVIDIA GeForce GT 705. The discrete card supports DVI - D (and VGA via a dongle) and HDMI. HDMI signal is the same as DVI - D in this case.

  BETTER (recommended)

  Computer-> DVI - D cable-> monitor #1

  Computer-> HDMI to DVI - D cable-> Monitor #2

  GOOD

  Computer-> HDMI to DVI - D cable-> monitor #1

  Computer-> DVI-D/VGA dongle-> VGA cable-> Monitor #2

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Pavilion 500-123w processor upgrade won't work

  I have the HP Pavilion 500-123w computer with the card mother H-Joshua-H61-Μatx (Joshua). I just bought this computer on December 23, 2013.

  According to the specification of HP product site, he says that the motherboard will support a processor Quad Core of Intel Core i7-2xxx (Sandy Bridge).

  So I bought an Intel Core i7 - 2600K CPU and installed. When I turn on the computer, it says "ERROR not taken into CHARGE PROCESSOR - YOUR COMPUTER NOW STOP." It won't let me even get into the BIOS, because it stops after a few seconds.

  I had already installed the update of the most recent from the HP site BIOS until I installed the processor. The BIOS version is JOS_817.ROM V8.17

  I studied this motherboard on other sites, and they said that this motherboard supports Intel Core i7 - 2600K processor.

  When I put the processor back original, everything works fine. I installed the new processor 3 different times and I get the same error message.

  Are there settings jumper, I need to change the motherboard? Does anyone else have this problem?

  I am an electronics technician and have done repairs to computer for years. For me, it looks like there is a problem with the BIOS does not recognize the new processor.

  Thanks for any help,

  Dan

  Oh no, I just heard from HP Support and they said:

  "Dan, I checked the specifications of your PC and gathered the information that your PC is compatible with Intel Core i7-2xxx (Sandy Bridge) Quad Core, but the processor Intel Core i7 - 2600K is not compatible with your PC." So, I recommend you to install with Intel Core i7-2600 (Sandy Bridge) Quad Core.

  Thus, the i7-2600 is a little different than the i7 - 2600K. Wish I had known before that I spent more than 300 million dollars on the new processor.

  I should have purchased separate components and built a new computer from scratch, like that I could update if I needed to. Well, we live an apprenticeship. Factory computers are not easily expandable.

  Thank you very much for your help, I appreciate it sincerely.

• HP Pavilion 500-527nb: GTX-750TI (Graphics) upgrade. Need help please, thx.

  Hello

  A very quick question.  The GeForce GTX 750 tiis usable on my HP Pavilion 500-527nb desktop PC?

  It is WITHOUT changing my diet, which has 180W...

  That power seems too low, but the PC came with a GTX 745 (OEM) that uses the same power that the GTX 750ti, yet when I check the specs on the site of GeForce, it says power to minimum power supply must be 300 w (for both 745 oem and 750 ti)...  So, I'm confused.

  Thanks for any help.

  Hi again Kebess,

  Thanks for the quick response!

  I don't know the problem install the ti GTX 750, but I can't guarantee that you won't have problems.

  Best regards

• Pavilion 500-336: updated drivers audio HP Pavilion 500-336

  Here's the audio that I have on my computer: IDT 92HD65C

  Looking at the Device Manager, I see that the driver date is 07/11/2013.  Where can I find the updated drivers for this?

  The version of the driver I have right now is 6.10.6496.0

  Is there still a good reason do not update the audio drivers?

  Hello:

  The audio works fine now?

  If so, I would not update the driver.  Many problems with W10 and IDT audio.

  There is an audio driver IDT W10 on your PC support page if the Beats Audio doesn't work properly or not at all.

  6.10.6504.0 Rev.A

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-500-300-desktop-PC-series/6879020/model/7127002

• Pavilion 500 - 200 t: the proccessor upgrade

  I just upgraded memory of my desktop HP pavilion 500-200 t CTO at max (16 GB), I was wondering if I could upgrade my processor or is it 'fixed' to the motherboard?

  Hi @deerpark243,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have questions about upgrades of the processor. I'll be happy to help you.

  First the CPU and does not set on the motherboard.

  Please refer to the motherboard, (Memphis-S) sheet.

  To half way down you will see "information update processor.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• HP Pavilion 500-297c: Boot failure now need to recoversystem

  My Pavilion 500-297c will not start.   All initial tests HD pass ok.   I am running an extended test.   Resetting the system w/maintain files fails.

  I guess even a hard disk failure.   I purchase and install a new HD.  The system came with Windows 8, which has since been upgraded to Windows 10.

  So, I'm going to need some kind of bootable recovery disk HP.  No idea how to get a CD or bootable USB drive to restore the system to a bootable state?

  Also, given that the current hard drive always seems to work at least in part, I hope to set it up as a second drive on the system once I get the new HD installed.  What is the best way to try that?

  > No idea how to get a CD or bootable USB drive to restore the system to a bootable state?

  Because Windows 10 _was_ installed on your computer, a "fingerprint" of your computer is registered with Microsoft.

  This 'fingerprint' allows you to download Windows 10, on any computer and create a bootable DVD that can be used on your computer, without having to enter a 25-character license key.

  Reference: https://www.microsoft.com/en-us/software-download/windows10

  There is no need to wait for HP to courier-ship anything for you.

  Tip: buy a new disk drive and install, remove your current hard drive.

  Install Windows 10 on the new drive and then attach the old drive as a "slave."

  and copy all your files to it on the new drive.

• Pavilion 500-056: accidentally disabled my speakers! sound/no

  So here's the scoop. My computer (HP Pavilion 500-056) had been broken for a year now, and I finally fixed and reinstalled windows 10. Everything worked well and I was very happy until I realized that I had no sound coming out of my speakers. Through my process of DIY autour, check the cables and the entry and other output sockets, there seemed to be no problem. I went in the sound mixer, and there, I accidentally disabled my speakers, so they don't pop up on the list more! I have no idea how to turn them on now, and I still have no idea how fix my sound. If someone could help pronto, I would be very happy! Thank you!

  Hello

  If they were just disabled, you can re-enable the as follows.

  Do a right-click the speaker icon in the taskbar and select "playback devices".

  In the next window, right-click on an empty area and enter a checkmark against "Show disabled devices".

  If your speakers are now listed, right-click them, then select activate.

  Kind regards

  DP - K

• HP Pavilion 500-311no: the hp Pavilion 500-311no upgrade

  Hp Pavilion 500-311no desktop PC, I bought a few years ago and now I feel like I would get some more power out of it then is it possible to upgrade this computer. I use mostly this pc for a game so what I'm looking to upgrade is the gpu. It seems that the motherboard supports the latest grphics cards and I think they should also fit the case. Incase of replacement parts, the power supply needs to be replaced probably as well. Also overclocking motherboard support and how the overclocking and replacement parts affect warranty?

  Greetings,

  You have some positives on your side:

  PCIe available x 16 slot 3.0.

  UEFI BIOS.

  Your chassis will limit the duration of the update of the graphics card.

  You have only a 300 Watt power supply.

  Most of the HP motherboards cannot be overclocked. I have a processor Intel 4820 K. HP offers limited overclocking abilities with this processor.

  Check the measurements on the existing power supply.  A diet of 600 runs most new graphics cards high-end. NVIDIA cards tend to require less energy than equivalent AMD cards.

  Check the height of the rear panel input/output where the x 16 slot is to determine the maximum length of a new card.

  Shop for a new card graphics and power supply when you know your limits. The high-end cards are usually double slot. Make sure you have room to install a card double slot. You need to be able to burst a second plate of input/output rear panel to install a dual slot graphics card.

  Modular power supplies reduce tangles of cables in the chassis.

  See you soon!

• How can I replace a 5 in 1 memory card reader in a HP Pavilion 500-027c desktop PC

  I bought a desktop PC computer given to nine HP Pavilion 500-027c Wal-Mart, 2 weeks ago... 5-in-1 memory card reader does not work... the Device Manager indicates that it works correctly, but when I put a memory card, nothing happens... The white light will come on indicating that the memory card has been inserted, but the computer does not recognize that something has been done... I would just replace the card reader itself... I see on the hp support where it is possible to replace the reader of card memory (before I/O), but I don't know where to buy the card reader itself real... I have no card on the card reader either... Help, please!

  Hello

  You can find a list of the parts for your machine:

  http://PartSurfer.HP.com/search.aspx?SearchText=H5P68AA

  What card you use, the machine only supports the following cards:

  • Secure Digital (SD, SDHC, SDXC)

• Pavilion 500 215 el: audio problem Windows 10 anniversary update

  I have an audio problem, then before moving to Windows 10 or the update of the anniversary of the audio working properly after the update I noticed immediately that the sound is distorted or "crunches".
  I haven't identified the problem because it's random, very often and it's very annoying, my sound system is its IDT DTS + I tried to reinstall the drivers with the latest version but some of the problem persists...
  Only, I noticed that the problem is more 'feel' when the bass setting is higher or when I change the audio setting to my taste.
  I ask you to help also became very boring because without my custom settings is really horrible!
  Thank you.
  Sorry for the English, but this isn't my mother tongue, I used google translator.

  Hi there @Alexcpp,

  Welcome to the Forums of HP Support!  I understand that, after the update of Windows 10 anniversary, you had some sound problems.  I'm happy to give you a helping hand with this.

  Check the support page for your model of HP Pavilion 500-215el desktop PC, there don't seem to be updated drivers, and you have already tried to reinstall existing ones.

  You can always try to use the HP Support Assistant, HP PCs - using HP Support Assistant (Windows 10, 8, 7) to see if there is a driver available that is not displayed on the support page. It is unlikely, but there is always a chance that the page has not yet updated.

  Another possibility is to make some adjustments on your system, just in case there is another driver or software that interferes with the audio, which could cause problems of lag. You can try the search, even if these: computers HP - computer is slow (10 Windows), HP - slow Internet troubleshooting (10, 8 Windows) computers.  They are never a waste of time because often there is something that could help the overall performance of the system.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Pavilion 500-314: IDT High Definition Audio works do not (HP Pavilion 500-314)

  Hello.  I have a HP Pavilion 500-314.  It works on Windows 10.  My audio worked fine until I had to reset the computer after my computer went into a loop of "prepare the AutoFix.  Once I reset the computer, there was an 'x' next to the small speaker icon in the lower right corner.  When I move my mouse over the "speaker" icon, he says "no speakers or headphones are connected.  It drives me crazy that the other posts about the IDT High Definition Audio did not work.   I would appreciate a quick response.  Thank you for your time.

  Shayna - Ghram-Kaiser

  Hello:

  Given that I don't know what other posts read you about it, what works for most forum members is to install the audio driver IDT W8.1 support page and the driver of your PC.

  This package provides the Audio IDT high definition (HD) to support of office models that are running an operating system supported. -Provides the models of desktop audio driver version and supported operating systems.

  File name: sp65946.exe

  If you have already done this and it has not resolved the problem, unfortunately I don't have any other suggestions for you to try.

• HP Pavilion 500-369: prob inherited from the bios!

  I just install a new video card in my hp Pavilion 500-369 its r7 sapphire radeon 265 and a 600watts power when I turned on it beeps 6 times... and I tried all sorts of tricks to youtube... tried to change my bios in legacy mode but I can't find it... plss help

  More recent versions of the UEFI suport Sapphire cards if it is stated in the specs on the website of the company. Perhaps you should consider returning and its replacement by a new PCIe card.

  Here is the list of specifications to Sapphire in the link below. Notice that most of the R9 series supports UEFI. There is no map of R7 series made my Sapphire Tech who take care of UEFI.

  http://www.sapphiretech.com/presentation/product/?CID=1 & gid = 3 & SGID = 1227 & pid = 0 & PSN = 000101 & lid = 1 & leg = 0

  The r7 Radeon 240 by Club3D, r7 Visiontek 250 FF, PowerColor R7 250 2 GB GDDR5 Eyefinity 4 LP Edition (UEFI) all supports UEFI.

• HP Pavilion 500-550nv: the upgrade of power

  Hello. I have HP Pavilion 500-550nv (in which case is microtour format) and want to upgrade my HP power which is only 180 W!

  I want to know what brand of food is supported for my pc model (hp pavilion 500-550nv) and how much wattage recommended (up to 600? up to 650?). Which is the recommended limit of power supply of power for my HP?

  I'm waiting for your answers. Thank you

  Hello @jeandoumpier,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post on food and wanted to help you!  I understand that you are concerned about upgrade options.

  You should be able to improve the power you want.  The Office should take but a lot of power, it must, food that is installed.  Just check that the power supply to use, firmly enters the tower.  Based on the Specifications of the product, you can find the dimensions tour here:

  • Height: 36.7 cm (14,48 in.) unpacked

  • Width: 17.5 cm (6.91 inches) unpacked

  • Length: 38.9 cm (15.35 inches) unpacked

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Update of power supply for HP Pavilion 500-056

  I want to upgrade to a discrete graphics card, but the 300 watt PSU is not enough.  It is not one of the standard sizes such as ATX12V, EPS12V, SFX12V (small footprint), LFX12V (low profile form factor), or TFX12V (slim form factor).

  Does anyone know of a specific diet that can fit in my computer case?  Without my ability to be upgraded will be severely compromised.

  According to the specs of HP Pavilion 500-056 desktop PC product page, your computer uses a power SUPPLY ATX12V PSU which is 150 x 140 x 86 mm (5.9 x 5.5 x 3.4 inches) in size. Please consider replacing it with a Corsair CX500, CX600, CX500M, or CX600M depending on your graphics card needs.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation