DROID: Can you use any mic usb with the brick to charge?

Similar Questions

• Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?

  Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?  How about studio flashes (Alien Bees)? I just sold my Canon gear and moved to Sony, but I need advice on how to trigger wireless flashes.  Thanks for any help you can provide.

  Larry

  LarryMarshall, Any Trigger of manual Radio should work.  Assistants of pocket or RadioPoppers.

  But there are a few problems with the 60 m.

  (1) it doesn't have a PC or a 1/8 port to connect directly to a Rec Radio of any brand.

  (2) you WILL NEED to buy or use a hot shoe with a PORT adapter... 1/8 according to the sync cable or PC you may already own.

  (3) you WILL NEED to 'Check' to 'ensure' that trigger the 60 m SHAFT is aligned with the center of contact your hotshoe adapter hot with a PORT... because some adapters won't online upward with the 60 m Flash... who fooled you into believing that it does not work.  When, in fact, it's just the PIN which is not aligning with ALL the hot shoe adapters.

  It will work... you just have to be careful... and know of the gatcha.

  The 60 m PUT claw is not fully compatible with all... hot shoe adapters and there that to do with how PUT 60 m flash foot aligns the trigger ROD.

  I triggered the 60 m in flash with RadioPoppers... in the manual... so, I know it works.

  It is, manual release of the waste of the 60 m flash TTL/HSS abilitys.    What is needed is for SONY to develop and deliver a Radio trigger Solution.  Which would be TTL/HSS and you allow to 'Control' the Flash too... from the camera.

  It is the power of a Flash of modern Radio System.

  Manual triggers are old school.

  p.s. the A7r/A7 can easily trigger flashes of Studio with Pocket Wizzards or RadioPoppers... or probably triggers of manual.    Just be careful if the brand you choose is reliable.

  Pocket wizzards and RadioPoppers were the choice of PRO for years.  Because they are reliable.

• Can I use an SD card with the new MacBook?

  Looking to buy a new MacBook. From what I can tell there is no SD card reader.  I don't see any accessory adapter for SD readers either.  Is it possible to use an SD card with the new MacBook?  Thank you!

  Only I can find is for iOS devices > > http://www.apple.com/shop/product/MJYT2AM/A/lightning-to-sd-card-camera-reader?f node = 91

  On the SDXC - Apple Support and SD card slot

  I hope someone will find an adapter for you.

• Can you produce arbitrary data TX with the USB-8452 SPI streaming mode?

  I use a USB of NOR-8452 controller in SPI mode, controlled by a C program compiled in 2013 of LabWindows/CVI. In order to talk to the chip, we designed, I need to control the delay between the final of SPC deassertion and the CS deassertion (T11 synchronization setting) to keep it very small. Therefore, I use streaming mode.

  I read the NOR-845 x Hardware and software manual and looked at the two projects that use the SPI in streaming mode in NOR-845 x examples dir. The examples use two REITS it to talk about the A/D converters. In other words, variable data in time comes from the SPI (ADC) slave to SPI master (Controller NI 8452) via the SPI_MISO line.

  Is it possible to use the USB-8452 to generate variable data in time that goes the other way, from the master to the slave SPI via SPI_MOSI SPI line? Can I make a burst of arbitrary length entry using the streaming mode?

  For example, let's say I have 8 bytes of data to be transmitted:

  WriteData [] is {0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08};.

  If I try to send this as 4 samples of 16-bit:

    

  ni845xSpiStreamConfigurationSetNumBits (StreamHandle, 16);
  
  ni845xSpiStreamConfigurationSetNumSamples (StreamHandle, 4);
  
  ni845xSpiStreamConfigurationWave1SetMosiData (StreamHandle, WriteData, 8);
  
  ni845xSpiStreamStart (DeviceHandle, StreamHandle);

  I expect to see transmitted:
  

  0 x 0102
  
  0 x 0304
  
  0 x 0506
  
  0 x 0708

  Instead, what I see in fact is the first NumSamples times repeated word:

  0 x 0102
  
  0 x 0102
  
  0 x 0102
  
  0 x 0102
  
  

  Is it possible to generate the first (non-recurring) model? Or streaming mode really is only able to capture input data?

  Thank you for any help you can provide.

  -jskroch

  Hello jskroch,

  I looked through the documentation for the NOR-845 x and it confirms that the workflow capability displays the same MOSI data for each operation of SPI during streaming.

  You can use the ni845xSpiWriteRead function to write a byte array in the order using 1 function call.  These bytes can be configured to your waveform specified.

  Kind regards

• can you use a windows pc, or the key with the view on apple tv?

  can I use a tampon or a pc for windows air play to my apple tv?

  Yes, if that goes to iTunes. See use AirPlay to stream content from iTunes on your computer - Apple Support.

  TT2

• Noise all using any device USB to the Satellite L655 - 19H

  Some time ago I bought the laptop Satellite L655 - 19 H.
  After say 2 or 3 weeks of use, I realized that sometimes it makes strange noise - like whistle not very strong, or something like that. Then I realized that it depends on the use of usb devices, when I plug in usb-flash Cards, keyboard, mouse, webcam no matter what usb device - this noise appears.
  Gave my phone for warranty service, they have repaired more than 1 month, then gave me the diagnosis - problem with the motherboard, the motherboard replaced.
  But the problem is always the same, the same noise. Is not too strong but after Let's say 5 hours near this large moskito makes crazy ^^.
  So I have two questions:

  1. everyone knows what this noise could be connected to? I am not an expert in the field of electronic devices, but spoke with a friend of mine, he said, it could be related to damaged transistors or defective to the Manger-usb or something, this is perhaps true?

  2. How can I check the serial number of the motherboard that has been installed on my device, when it was produced - I want to check the warranty service guys have really done anything, and they just kept my laptop 1 month in stock and then said, he fixed, man.

  Thanks for your help and best regards.

  Very interesting question.
  Have you noticed the same behavior with or without adapter?

  # I think you're the first person on this forum who has this strange issue reports related to the use of external USB devices, so I don't think it is a general problem
  # This can be problematic. Have you checked screws at the bottom of your laptop? They are like a new or it is visible that your laptop has been opened?

  What you can try is to communicate with other services and ask to check again.

• Can I use a PXI-6224 with the SCB-68 to take the measurements of 4-wire RTD, or do I need a power supply separate?

  I suspect I already know the answer to this question:

  I have an PXI-6224 M-series data acquisition card and a terminal of the SCB-68 block and want to take action using a bunch of 4-wire RTD. Is the power to the power source for these measures 6224, or is - not possible with the hardware I have?

  I know that NEITHER you propose other solutions to my problem: I am interested to know if I can do these measures with the device that I currently have on site.

  Thank you!

  Hello Jeffrey,.

  You have two options here, but it doesn't look like you need some hardware.

  The SMU-4357 built conditioning of signals, but it will not work on the chassis curent you have:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/210596/

  We also have an option with the NI 9217 cDAQ, but once, it gets you into a different platform:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/208804

  We used to have an option that we sell no more - the SC-2042RTD. If you are lucky and have one of them on hand so here's some info:

  http://digital.NI.com/public.nsf/allkb/4FF2C0F8D11B99B486256F4C006DCEA0

  You can also use these two elements in conjunction with eachother with your current PXI card:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/12311

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/10778

  Finally, you could get an SCXI chassis and drop them in:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/201609

  Thank you

  Joel C

  Technical sales engineer

  National Instruments

• can I create custom context menus? Can I use Push technology? With the browser?

  Anyone know if I can create custom context menus? Also, can I use Push technology? I vibrate the device? With the browser?

  Just try to clarify to make sure I understood the question.  The browser does not support the menu adding items to the BlackBerry menu (I don't know how tell - the menu that is displayed when you press the menu key on the BlackBerry). Java applications are.  You could build something in JavaScript (on 4.6 and later) who gave you menus, but it does not fire when the menu button has been pushed.

• Can I use any device to access the creative cloud, including my iPhone?

  The creative cloud access from any device with a browser and an Internet connection? Mac or Windows desktop PC, iPad, iPhone, Android tablets and phones...?

  To access Adobe Creative Cloud, you just need to access to the Internet and a web browser. You can access Adobe Creative cloud of any device that meets these criteria, including your iPhone. Learn more.

• Can we use type multiset and with the clause the two

  Please let me know how to use the multiset type and with the clause.

  You need more inlining, as for example in:

  SQL> select *
  from table (cast (multiset (select *
                              from (with t as (select deptno from dept)
                                    select * from t)) as sys.dbms_debug_vc2coll))
  /
  COLUMN_VALUE
  ----------------------------------------
  10
  20
  30
  40
  50                                      
  
  5 rows selected.
  

• Can I use any mSata SSD with ExpressCache?

  Hello

  I'm buying a X230i and I want to increase the performance with a SSD cache drive, as I have on my desk.

  I've been watching this disc; Kingston SSDNow v + 30 GB mS200 (http://www.kingston.com/en/ssd/s#sms200s3), that seems advantageous, that need to be or I might as well buy an SSD 'normal '...

  But it'll work in a X230i and I can use the ExpressCache software with it?

  Best regards

  Morten

  Hello

  I do not have a X230i, but I have a 220 X, and I successfully running Windows 7 and Windows an mSATA 120 GB SSD and Windows 8.0 8.0 and 8.1 of a 240 GB inside mSATA.  So I think that these drives would work in the most recent series of X230i thus, as long as it wasn't anything physically blocking a mSATA card installation.

  Kind regards

  Aryeh Goretsky

• How can you get firefox to work with the windows subst command locally?

  I want to test my Web site locally using the windows subst command to emulate the root of my site. It works perfectly with IE8 (except IE8 displays the different available to firefox) but does not work with Firefox. All images, sheets, styles and anything with a root path does not work. If I use a relative path (.. /.. / for example) to the objects that they works very well.

  How can I view web pages locally by using a path root of Web site?

  Firefox does not allow access to local files.
  
  It is always best to use relative addressing.

  See also:

  • http://KB.mozillazine.org/Links_to_local_pages_do_not_work

• Can I use my MacBook Pro with the Display 27 "Thunderbolt

  My MacMini seems to have thrown a crisis of anger with El Capitan and I need to continue my work with my 2.4 Ghz Intel Core duo MacBook Pro (2008).  I see that I can connect the two wires into the side of my MBP but an empty black screen seems to dominate with no sign of life at all.  It is likely to please?

  TBD will only work if you have TB port on your laptop.  Your laptop probably has a mini port that looks the same, but differs based on display.

• Can you do a blog template with the muse of adobe?

  I want to know how to design a blog template in adobe muse !

  Yes you can.

  I recommend it because it is not a strong thing of Muse... I would like to use Dreamweaver to create a database of the blog template and then put it in a Muse site, but there are other options like some have posted above.

  PS, there is no need to ask questions only one line, and then waits a detailed answer... try to be clear about what you want when you ask for help mate.

• Can you have a smooth scrolling with the audio objects document and several States?

  I have a portfolio which is 1536 x 2048. It is a horizontal plane. I have a page that I would have smooth scroll (horizontally). This page size is 1536 x 7250. This page also has a multi state object and audio.

  I have the page in a folder on my desktop and it is called smooth roller. I tried to import it with anything that is open, but I always get an error of content generation / error must match the Aspect Ratio.

  I tried to create a zone and add it as a scrollable content, but I lose the audio and multistate.

  I tried to get this to work everyday and no matter what I try, I can't have the page to work.

  I was at some point able to get it to load, but it 'fit' the size of the iPad so it ended up by about 300 high 2048.

  Help, please...

  Thanks, Angel

  If you have a folio of 1536 x 2048, 2048 is your width of landscape. You need make image smoother scrolling 2048 x 7250, not 1536 x 7250. When you import or add the article, make sure that you choose the option to scroll smoothly to the landscape.