Acer aspire one P531h does not illuminate after power to the top

Similar Questions

• Acer Aspire One D270 does not turn on!

  Have an Acer Aspire One D270. I've had for about 4-5 months now. Today it suddenly has stopped and it won't turn on. I left for a few hours but nothing yet. I thought it was a battery problem but the charging light does not turn. I know for sure, it is not the charger. Please help me! Thanks in advance!

  [Moved from comments]

  Nevermind found the solution...                                                                                                              Follow the steps below. (Please be careful when you handle the electrical components of the computer such as batteries and power adapters)

  • Remove the battery and hold the power for a few seconds (drain any remaining power)
  • Turning on the computer without the battery with the AC adapter is plugged in.
  • Wait a few seconds and then reconnect the battery

  After a few tries the computer should start normally supported. The amber battery stops flashing and turns green when fully charged.

• Acer Aspire S7 392 does not start after the new Antivirus installation

  Hello

  I bought the Acer Aspire S7 392 in October this year of digitec.ch AG here in Switzerland. Everything worked well until December 19 when my Antivirus McAfee has expired and I decided to change my Comodo Internet Security antivirus. A month back, I had installed Windows 8.1 as well and things were smooth until last night. Last night, when I installed Comodo Internet Security, the computer requires a restart, I did, and then my computer erased. I could not even reached the Acer logo at startup.

  As I tried to check the observation of details of covers them this white screen problem, Irealized that many people suffer from a similar problem. It seems that Windows 8.1 and an installation of a new antivirus may have led to this white screen problem. In addition, it seems to be a bios problem that the computer would not start and I hope that someone could help me with this problem.

  Thank you very much Acer-Tommy. I had to take it to the Acer Support in Switzerland. He partially solved the problem. My S7-392 has a built-in battery that I had to reset which allowed the laptop to reboot normally. As in, I was able to boot up to Windows 8.1. However, as soon as I logged into Windows, it hooked up soon. Do the restart 3 times triggered the automatic repair/update option. That I took and returned to Windows 8. I had a Bios 2.05 2.03 intead and I had to install 2.05 before making updates. I recommend you seriously all the people who use the S7-392 to strictly follow the installation procedure for Windows 8.1 mentioned on the Acer site.

  Please update your Bios to 2.05 before installing something new, especially a new anti-virus.

• Acer Aspire One 522 does not start

  I replaced the RAM of 1 GB in my 522 an Aspire. After that the netbook starts not more. Only the blue power led flashing and I hear the fan. I can only turn off by pressing the button for 5 seconds. The screen is black and I can't access the bios. Now the laptop no longer starts with the original module either. I'm looking for a way access the bios, but I found nothing for this model on the internet. Hope someone can help me. Thank you

  Finally, I took a better look at the RAM module and the slot. Although I replaced the modules many times it seems that they were not properly placed in the slot. In any case, it works with my new 2 GB module.

• Acer Aspire 5610Z Windows does not load... No recovery cd

  I have an Acer Aspire 5610Z Windows does not load, when I use the F10 it comes up says:

  Modify the Windows boot option for: Microsoft Windows Vista

  Path: \windows\system32\winload.exe

  Score: 1

  Drive hard b44bb44b

  [/ noexecute = optin]

  That do I don't know...

  Thank you

  "When I start the laptop, 1 screen 2 times, beebs gives me the whats available in the computer, Press (F1) to resume, or (F2) of the installation.

  I wish that you mentioned the "beeps" in your original question.

  When you start a computer, you will receive a 'beep', which indicates that the motherboard has spent his own self (POST tests. Power on self test))

  'beeps' (plural) normally indicate a hardware problem.

  Read the Information on the links about different codes "beep":

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  Contact the Acer Support if under warranty.

  http://support.Acer.com/us/en/default.aspx

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• Acer Aspire Wifi S3 does not

  WiFi an Acer Aspire S3 adapter does not work and he repeats to me "limited." It has always been a quick an easy solution to the day, the admin has forgotten their password and can not remember. They changed on a different computer, but the Acer could not know that because he had no wifi connectivity. No one can access the command prompt, or anything else that requires an admin password. The laptop is now useless and no one can reset or refresh it because you need the admin password to do so. There are no. ETHERNET SLOT anywhere on the computer.

  All solutions?

  In addition, Windows Update cannot update anything because there is no wireless connection. This is a serious problem...

  Help, please!

  There is only the locations of USB, HDMI and SD card on the laptop.

  Every time that you try to connect to the Admin, he says:

  "This computer is in offline mode. Connect, and then try again"or something like that.

  Hello

  Given that the admin has forgotten the old password and due to the unavailability of the network connection, the device is unable to synchronize the password. At this point of time you have get the device for a coverage area of network where you let the computer, the password synchronization or you must put in the old password to connect.

  See also, Cliff_NCliff_N responded on 7 December 2012 post

• I have an Acer Aspire One Netbook. (No DVD player). From the start on the hard drive, I get a black screen with a blinking cursor.

  I have an Acer Aspire One Netbook.  (No DVD player).  From the start on the hard drive, I get a black screen with a blinking cursor.  The cursor does not type.  For me, maybe I need to reinstall windows 7 and startup tasks are corrupt.  I have my product key genuine for the computer, but no way to get to windows.  How to restore windows on a netbook that won't start?

  original title: Netbook Windows 7 problem

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  Borrow a 32 bit Genuine Windows 7 friends DVD disc if you know someone who has one.

  Make an image of the DVD, you can use a program like ISO Recorder to do.
  http://alexfeinman.com/

  If you don't have a Windows 7 DVD to borrow, try to upload a picture:

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  You change the content of the. ISO file and delete the ei.cfg file. After having edited burn it to a blank DVD disc or put it on a USB key. Startup, it will reveal all editions of Windows 7, select the Starter edition. More information in the following article on how to change the file ei.cfg

  Utility delete EI.cfg allows you to use a product key
  http://Lifehacker.com/#%215438005/eicfg-removal-utility-lets-you-use-any-product-key-with-your-Windows-7-disc

  You can create a bootable USB stick with the following:
  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key (this is the key of Windows 7 Starter, which would be located on the COA sticker at the bottom of your laptop)

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.

  Once activation is complete, enjoy yourself, make a backup of your installation of Windows 7 Starter please? You will need to do this an external hard drive, but its worth it. Because if your installation is messed up, all you have to do is to restore from a backup.

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Once the backup is complete, you can do an upgrade to Windows 7 Professional by using the product key that you have, if it's a full key, Windows 7 Professional Anytime Upgrade retail or upgrade license key.

  Click Start, type Anytime Upgrade, follow the on-screen Wizard, enter the key of Windows 7 Professional on demand, click Next and restart your computer when you are prompted. Less than 10 minutes, you should be upgraded to Windows 7 Professional and your files and settings retained.

  Reactivate the installation, you may also do it by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

• Why the highlighting of text in a PDF document does not work after you save the file

  Why the highlighting of text in a PDF document does not work after you save the file

  What application you use to highlight?

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• Keyboard does not work after authentication on the RDS Session host

  When you connect to the RDS through the access portal or app keyboard does not work after authentication on the RDS session host. Offline authentication works very well, past will guide you to the RDS host, then when you try to reset your password, the keyboard does not work.

  Has anyone else had that... ?

  Options (some better than others!) are:

  1. move all MS applications seamless

  2. have an application named "Reset your password" (or similar) which uses MS Seamless.then you can leave other applications, as they are

  3 disable authentication carried forward and implemented our service reset password instead so people reset their password before can connect you.

  4. use the full desktop instead of transparent

• Acer Aspire One will be not run Office Starter after having uninstalled windows 10

  I made a huge mistake and clicked on the link to get Windows 10.  After you have installed Windows 10, I realized that the Office Starter Edition on my Acer Aspire One is not compatible.  I started Windows 7 but now Office Starter will not work.  I try to fix but get a message that says I don't have an internet connection.  Yes!

  Hello

  I advise you to put your PC with [Alt] + [F10] and perform the updates. Using "Back to Windows 7", you lose a lot of applications and have a few problems.

• Acer Aspire AS5253-BZ849 does not

  We have more than 500 Acer tablets.  There is no market.  Initially, it stops after 30 minutes to an hour. Using the power it turns back on.  Tried to go back to 'factory settings '.  When it restarts, it remained in the "begin on the core of recovery."  He left after several hours.  After recharing that nothing happened.  The power button does not seem to spring back when you press.  Nothing happens when im pressing pwr + flight +.  It does not and the power button does not illuminate unless the power supply is connected.  Even with the power supply connected it fails to start or show signs of life.  Please help.

  Power button on my Acer A500 will not work.  How can I fix it?

• Satellite M100-164 display does not illuminate after hibernation

  After the computer wakes up from hibernation by lifting the display panel (cover) and the LCD screen turns off due to power management settings, display shows the Toshiba logo and does not return after a key is pressed and the keyboard is not responding.

  I turned - power & removed the battery without success-.
  OPS: windows XP.
  Help, please.

  Hello

  You have removed the battery but wait you a bit?

  If please plug the laptop and remove the battery.
  Wait 15-20 min and then plug the AC adapter and put the battery in the laptop.

  Then try again!

• Reinstall Windows XP on Acer Aspire One - computer did not come with a recovery CD

  How to use the product key that came with my Acer Aspire one to reinstall Windows XP without CD?

  Hi MariaMouzes

  You can restore your computer configuration using the procedure described in the link below.

  How can I restore my system using eRecovery management program?

  http://Acer.custhelp.com/app/answers/detail/A_ID/12869

  Or you can buy the recovery media by hint at the link below.

  https://store.Acer.com/store/Acerna/DisplayDataValidationServicePage

  Good luck.

• Time Machine does not work after update of the Sierra

  The time function machine my Mackbook Air 2011 stopped working... it has not been saved since update for Sierra, it only take screenshots every hour, it will perform a backup is no longer on my external HD as before.

  There is no problem with the way it is implemented or the hard drive, it's me that my iMac is working perfectly since the update for Sierra and it's backup via the time machine on the same hard disk.

  It is a hard drive and put in place I was in use for about 5 years with no problems.

  Also since the update for Sierra I noticed that my MacBook Air gets hot and the fans go wild, although there was nothing or performance other than the system is auto.

  I lost the use of my built in camera after the update to El Capitan, and now I've lost the use of time machine... I was wondering if I should go back to Yosemite that everything worked well then!... is this possible?

  Thanks for any help with this!

  Update:-just so you know, time machine is to find the back up ok drive (external hard drive), it then goes to "preparing backup" and that's all, he remains in this preparation save the scene for centuries, after a while it just stops and it is saved all... nothing!

  Also noticed when I checked in Time Machine full backup I have before update for Sierra disappeared, he disappeared, been deleted... I don't know what is happening with it!

  Overall since the update for Sierra my MacBook Air did not work properly, in addition to all that Safari does not load, just to get the wheel spinning, and now (with the demise of my old back ups) it seems I can't go back to a previous state.

  My Mackbook Air took it!... the last update took the camera and really Sierra in... material not compatible with all new software, none of the new features work on my iMac or MacBook Air (only Siri), so a useless upgrade for me really, wish I didn't!