DROP command does not work

Similar Questions

• Diagnostic test Exchange fails with 'Quest remote command does not work.

  I configured vFoglight and monitoring Exchange in a lab. When I run the diganostics Exchage test I get error "Quest romoting command does not work. I made sure that the agent's account "RUN as Service" applied.  Any ideas as to what may be causing this?

  Hello

  We look at your environment. Please open a case of pension.

  Sincerely

• Why not default shortcut keyboard to show/hide baseline grid (opt + command +') does not work?

  Why not default shortcut keyboard to show/hide baseline grid (opt + command +') does not work?

  Thank you! Who took care of her!

• I upgraded to ois9.3.3 and now my voice command does not work

  Yesterday, I did the upgrade of the ois 9.3.3 and since my voice command will not work.  I searched the internet for advice on how to fix but nothing that they suggest work.  How can I get rid of this upgrade and go back to what I had which works or solve this problem.  I need voice control for I can be hands-free while driving.

  Have you tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo come back? You won't lose data by doing this, but he cn cure some problems after installing new software or applications.

  Have you tried to downgrade from iOS?

• Tilde shortcut command does not work

  I changed some keyboard shortcuts in the preferences system recently and never since the command ~ shortcut does not work.  I tried that in Chrome and Xcode, the apps that I use most, it won't work and I get the loud beep error System.  I posted the stack overflow, but received no response.  I did some research and reset my shortcuts keyboard by default, but this did not work.  I'm more frustrated as I use it in development, and there is no obvious solution on google.

  Look in system-> keyboard-> shortcuts preferences.

  

• "Drag a Drop feature" does not work in Ipad.

  I use JDEVELOPER Studio Edition Version 11.1.2.2.0.
  I develop a sinple too page table and by using "Drag Drop functionality year" to pass rows of a table to another table.
  This work properly in all the web explore for Pc and does NOT WORK in IPAD.

  support iPad is currently in 11.1.1.6 and we are targeting to add it to the 11.1.2.3 as well.
  So, you will need to wait as the version to come out.
  (should be relatively soon)

• Satellite Pro L10 - FN + F5 view command does not work

  When I attach my Satellite Pro to an external CRT, LCD monitor or projector, I get the same problem each end every time.

  the Fn + F key to toggle the display of control does not work.

  When I start the laptop with the attached external display device, everything is fine, and the display is exclusively channeled in the external display. but as soon as windows has started, the display switches to the screen of the laptop, and there is no way to make it back.

  y at - it an update for this problem, or another solution I know not?

  Thank you.

  Hello

  Seems to be a simple software problem.
  I put t know how long you OS runs on the laptop, but maybe some files registry entries are corrupted and therefore the FN key does not work as it should.

  Could help to reinstallation of the OS and the use of the recovery CD

• Secure the Module area for purchase / command does not work

  Seems I can't access this module...   The module on my page does not work correctly. Why did whenever BC pushes a new version, something breaks?  It has been deleted?

  1. {module_order, default}

  Works very well here.

  You have by default but rather than the workflow I is why it does not work.

  There is no rejection this week it's next week.

• WLST command does not work

  I try to make the partitions in the MDS repository using createMetadataPartition(), but it is does not work.
  It gives NameError.
  Please give some suggestions how to make partitions in Repo MDS?
  NY help would be appreciated.

  What do you call the shell WLST?

  From what I've seen, Oracle has introduced many new features for WLST, specifically those related MDS.

  If you call WLST via [ORACLE_HOME]\[MIDDLEWARE_HOME]\wlserver_10.3\common\bin, he will know nothing createMetadataPartition().

  I use [ORACLE_HOME]\[MIDDLEWARE_HOME]\oracle_common\common\bin\wlst.cmd, which I believe is the same as [ORACLE_HOME]\[MIDDLEWARE_HOME]\Oracle_WC1\common\bin\wlst.cmd. In my view, that he adds the jars containing the new functions of the CP. It's been a while since I've dissected it, sorry I don't have the exact explanation.

  In addition, if you use SSL with a personalized certificate you will probably need to pass these properties. I use something like this before I invoke wlst.cmd

  SET WLST_PROPERTIES = % WLST_PROPERTIES %-Dweblogic.security.TrustKeyStore=CustomTrust-Dweblogic.security.CustomTrustKeyStoreFileName=D:\Oracle_Home\Middleware\sslcertificates\mykeystore-Dweblogic.security.CustomTrustKeyStoreType=jks-Dweblogic.security.CustomTrustKeyStorePassPhrase=mypass-Dweblogic.security.SSL.ignoreHostnameVerification=true

  See you soon,.
  Christophe

• Flash - drop target does not work in the container?

  Hello
  
  I am very new to global Flash but I hope this isn't a stupid question!
  
  I produced a Flash movieclip containing a fair a few layers, including layer masks, actionscript, etc.. One of the things that is allows the user to click and drag a number of movieclips and place them anywhere in the mc, but if they fall on specific targets and then some actionscript (AS2) kicks in, stops the drag object to be moved again and allows to browse its executives to basically 'expand' the drag object and beep to indicate to the user that they have struck the appropriate brand.
  
  It all works perfectly on its own or in a window of browser etc.
  
  The problem I have is when I try to insert the Flash movie in a package of e-learning in Adobe Captivate 4. Things work ok apart from when you drop the object slipped on a drop target, nothing happens. Does not run the actionscript code.
  
  Would the fact that the movieclip is (probably) sitting in a container (the Captivate e-Learning Pack) be the cause of the problem? If so, how can I solve this problem?

  ANY help would be greatly appreciated!

  Code as1, as2 is not.  and who has all sorts of problems when you load in a container movieclip.

  you really should learn as2.  but in as1, it would be:

  {if (Eval (GetProperty (This, _droptarget)) ._name eq 'Ref_in')

  It's a very uncomfortable syntax (as1 being clumsy) and you need to remove these slashes (/) of your code.

  in as2, this would be:

  {if (Eval (this._droptarget) ._name == "Ref_in")}

• The command does not work on my ESXi.

  Hello people.

  How are you?

  I use SSH to loggin to the ESXi and when I want to execute the commands available, ESXi tell me which command not found!

  I use the "su" command to become root, but orders do not worked.

  $ esxcli

  -bash: esxcli: command not found

  $ su

  Password:

  # esxcli

  bash: esxcli: command not found

  #

  How can I solve it?

  You do not understand... after that 'su -' just try to run the esxcli command, or if you do not '-' with the su command, just run esxcli to folder/usr/sbin .

• Why is the key comma or insert the command does not work in Premiere Pro?

  pressing comma does not put the video in the timeline panel as it should and even with by clicking Insert icon

  You probably forgot to patch the track.

  

• Drag and Drop grid does not work

  I HAVE MS WINDOWS XP.

  I HAVE A FOLDER WITH DOCUMENTS WORD AND JPEG IN IT.

  WHEN I DRAG AND DROP A FILE INTO THE FOLDER TO MOVE AROUND I NO LONGER GET THE GRID OF CLARET BAR "BLACK." THE FILE AROUND EMERGES IN THE FOLDER, YOU CAN MOVE ANYWHERE, IT WILL OVERLAP OTHER ICONS FILE.

  IT HAD WORKED, IT SEEMS THAT I MIGHT MOVE ONE FILE ON THE WINDOWS OF THE SCREEN AT A GIVEN TIME, PERHAPS THIS CORRUPTED SOMETHING.

  IN ANY CASE, CREATED A NEW FOLDER, COPIED THE OLD FILES FOLDER, IT WORKS VERY WELL.

  WHEN TO USE THE OLD NAME OF FILE, SAME PROBLEM, NO 'BLACK' DRAG-AND-DROP POSITIONING GRID BAR.

  THE FORMER NAME OF FOLDER SHOULD BE SOMEWHERE AND IT IS CORRUPT.

  I NOTICED THAT THE SREEN GTA CLICK WINDOW ARRANGE ICONS AUTO ARRANGE AND ALIGN WITH THE GRID OPTIONS ARE CHECKED, THE FILES DO NOT HAVE THESE OPTIONS.

  MAYBE THERE IS A COMMAND TO CHANGE REGISTRY RUN WHERE I CAN FIX SOMETHING.

  BUCKS COUNTY, PENNSYLVANIA

  Hello

  This is probably because you have disabled somehow "Auto arrange" for this folder.

  Open the folder where you had problems, and then click the drop-down display. You will see options for how you want to see the contents of the folder. If you selected thumbnails, tiles or icons, there is another option under the terms of "rearrange icons by" called "auto arrange". This is a toggle switch, repeated clicks turn the lights-off etc.

  BTW, the use of 'all capitals' type is not considered by some as the right label and discourage some people to respond. So, if you want to maximize your chances of a reply in the future, type like I did, or even entirely in lowercase.

  Tricky

• RCLI command does not work

  I installed VI Perl Toolkit version: 1.6 on Windows 2003 server (Server vCenter). I don't have even a single output for its PL files, which are placed in the bin folder. I can find a lot of pl files in the remote D:\VMware\VMware VI CLI\bin directory. But I couldn't get out to one of my orders. I got a lot of errors like:

  • Connection to the server error "https:/ / servername/sdk/webService '"
  • Failed to connect due to a bad username or password (I'm sure that my credentials are perfect)
  • When I run any command, it shows the help content.

  I gave my entries below that I have tried. Please let me know if I'm doing something wrong. Do not give links to reference because I have already fed up with all these links. If you can, please provide the screenshot of your order and its output.

  D:\VMware\VMware VI CLI\bin remote > vicfg - mpath.pl - Server 10.216.241.10 - username 'root' - password "Passw0rd123".

  (I tried with my credentials of administrator, that has been created for the admin roles. It contains all the privileges as root).

  Thank you

  Ganesh

  If you get "connection failed due to a bad username or password", it means that you probably not specify the good user name or password. Check by opening a session on the vSphere Client and if you are using ESXi, make sure that if you use root that you do not have active locking mode.

  If you try to run vicfg-mpath/esxcfg-mpath, you must specify at least one parameter, otherwise you will get just the Help menu.

  This, use the-l flag which lists the paths

  VI D:\VMware\VMware remote CLI\bin > vicfg - mpath.pl - Server 10.216.241.10 - username 'root' - password 'Passw0rd123'-l

  Here is a screenshot with vCLI 4.1 vicfg-mpath, you can upgrade to the latest version and it will always be backwarsd compablity VI 3.5 or vSphere 4.x

  

  FYI - the reason why people provide links to documentation is most of the time, users don't actually read the documentation before using some of the CLIs and then ask questions that can easily be answered by taking a look at the referenced documents.

• Spry menu drop-down does not work in internet explore

  Hi guys, I have a problem with my menu drop-down. Please help me

  1. I already use spry menu bar 2.0. It works in firefox but not in internet explore.  It is said: "internet explore restricts this form of running scripts or Xcontrol active Web page.
  2. I want to make the spry menu to be "liquid". I mean when I restore down the window of firefox or internet explorer, it will automatically change size. I want to like it so that size it can look also into ipad or pc.

  Thank you for your help

  For some, I don't understand why that is to say the berms when you try to run a script from a local file. As a general rule, if you need to download the file, then download in IE, it works without problem.

  This page should help...

  imations http://www.troublefixers.com/Disable-ActiveX-Warning-in-Internet-Explorer-while-Playing-an.