Drop-down list options, even if not selected

Similar Questions

• selecting a value in the drop-down list but page must not get recharged again.

  Hello
  I created a drop-down list. After you have selected a value from him, I can get a value in the box of text below according to updon one sql query. but the problem is that I HAV to select Page Action when the changed value parameter to the set value and redirect. Thanks to her whenever I have to select a value from the drop-down list, page get updated. Is there a way that will satisfy the requirement but page does not get new dependants.
  I use apex 4.2.
  Thank you

  You can create A dynamic Action to set the value while changing the value in the Select list (drop-down list).

  Event: change
  Selection type: item (s)
  Article (s): choose your selection list item
  Action: Execute the PL/SQL Code
  PL/SQL code:

  begin
  select colum_name into :Px_text_item_name from table where column_name=:px_select_list_name;
  end;
  

  Page elements to send: px_select_list_name
  Page referred to return: Px_text_item_name

  Its work for me without refreshing the page. Assume that, if you want to pass this value to the element in another page, then use the branch for redirection and assign the value to the element on the page of another.

  Thank you
  Lacombe

• Changing the values in drop-down list in the event not return current value

  Hello

  I have a combo that I'm filling using javascript according to the post by Brad here http://blogs.4Point.com/Brad.White/2010/03/populate-a-drop-down-with-a-Web-service-in-a-PD e.html .

  I hooked the change event from the drop-down menu to display the new selection in a separate as text box below

  ApplicationForm.Page1.ddlUsers::change - (FormCalc, client)

  txtSelected.rawValue = ddlUsers.rawValue

  This code works, but shows the previous values (or the last) that has been selected in the drop-down list, but not the current value, which has been selected by the user. I also tried to use selectedIndex rather rawValue on ddlUsers but it has the same behavior. "Commit on" from the drop-down list is set to "SELECT".

  Am I missing something here? How can I get the current value is selected in the drop-down list.

  Thank you

  Marie Pascale

  Hi Carole,

  I didn't look at the blog, but the most appropriate property for use with the change event is xfa.event.newText instead of .rawValue.

  Thus, as the Javascript:

  txtSelected.rawValue = xfa.event.newText;
  

  Hope that helps,

  Niall

• drop-down list - option line break

  Is it possible to add a line break to a drop down list?

  Or change the width of the drop-down list when the user clicks to view the options?

  Some of the text I have is very long and you can't read it all.

  With the help of this question, I could get this job.

  https://forums.Adobe.com/message/2208564#2208564

  Displaying the XML Source Code and adding
  to produce a carriage return.

• How to use a function switch box to the reference that is used several times in the previous drop-down list options?

  I use JavaScript coding in LiveCycle and development of dependent drop-down areas, but I find it difficult to write correct code. See the example below. I'm trying to use a multiple box function that refers to an option that is listed several times in the previous pull-down menu. The problem I am running into is that when I refer to any color or Nissan and Chevy, it returns the results of the color in the "Ford" column only. I'll always see color (blue, black, green and purple) options in my second drop-down list and it seems fine, but then the third drop reference only the options and colors 'Ford '. (I don't have the code for the third menu list drop-down).

  I want the client to choose Chevy or Nissan and have her drop downs (based on the color they chose)-dependent, but I can't seem to make this work.

  I hope it is clear enough (probably as mud...). I would appreciate help!

  Form1. #subform [0]. #subform [1]. cboModels::exit - (JavaScript, client)

  cboColor.clearItems ();

  {Switch (this.) RawValue)}

  case "Ford":

  cboColor.addItem ("Blue");

  cboColor.addItem ("Black");

  cboColor.addItem ("Green");

  cboColor.addItem ("Purple");

  break;

  case 'Chevy ':

  cboColor.addItem ("Blue");

  cboColor.addItem ("Black");

  cboColor.addItem ("Green");

  cboColor.addItem ("Purple");

  break;

  case "Nissan":

  cboColor.addItem ("Blue");

  cboColor.addItem ("Black");

  cboColor.addItem ("Green");

  cboColor.addItem ("Purple");

  break;

  }

  Form1. #subform [0]. #subform [1]. cboColor::exit - (JavaScript, client)

  cboPrice.clearItems ();

  {Switch (this.) RawValue)}

  case "Ford":

  case "green":

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  break;

  case 'Chevy ':

  case "green":

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  break;

  case "Nissan":

  case "green":

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  break;

  }

  You can use '\n' for newline in a string, so

  "Option 1, \nOption 2, \nOption 3;

  Put each on its own line.

  Bruce

• Count the number of drop-down list items based on the selection

  You will need to get an "account" (in the fields of totals at the bottom) of each of the values/items selected in the drop-down "ddClassification". My drop-down fields are labeled ' ddClassification.0, ddClassification.1... etc.
  
  

  Should a loop be involved? Been looking around for the answers but can't really find anything. The values in the drop-down list 'ddClassification' are 'Choose', 'Major', 'Minor', 'OBS', 'OFI '. If I could just get help on one of the "total" fields (for example perhaps the total large field) first then I could go from there. All THE HELP is APPRECIATED! Thank you!

  
  I have attached a screenshot and here is the link for the form: Dropbox - ASSESSMENT_NOTES.pdf
  

  Yes, this requires a loop. Here's the Basic code structure, which you can use for the total key, for example:

  var total = 0;
  for (var i=0; i<=4; i++) {
      if (this.getField("ddClassification."+i).value==4) {
          total++;
      }
  }
  event.value = total;
  

  Place this code in the script to custom calculation of 'txtMajor '.

  Edit: Name of the field max adjusted from 5 to 4...

  Edit #2: Also adjusted the value of "Major" in the value of exports 4...

• Drop-down list options

  Hi all, I have a form that should have a drop-down list, but the list must be graphical (symbols) and no text.  Y at - it a script or a way to manipulate the drop down so that the user can select one of six different graphics instead of text?

  I have Adobe Acrobat X.

  Thank you

  Connie Bretes

  Please find the Script of the example below:

  var ddlvalue is this.getField ("Dropdown1") .value;.

  App.Alert (ddlvalue);

  If (ddlvalue is "Image 1")

  {

  Image1 = this.getField ("Button3") var;

  Image1. Display = display.visible;

  Image2 = this.getField ("Button4") var;

  Image2. Display = display.hidden;

  image3 var = this.getField ("Button5");

  image3. Display = display.hidden;

  }

  If (ddlvalue is "Image 2")

  {

  Image2 = this.getField ("Button4") var;

  Image2. Display = display.visible;

  image3 var = this.getField ("Button5");

  image3. Display = display.hidden;

  Image1 = this.getField ("Button3") var;

  Image1. Display = display.hidden;

  }

  If (ddlvalue is "Image 3")

  {

  Image2 = this.getField ("Button4") var;

  Image2. Display = display.hidden;

  image3 var = this.getField ("Button5");

  image3. Display = display.visible;

  Image1 = this.getField ("Button3") var;

  Image1. Display = display.hidden;

  }

• Drop-down list options deleted after Windows Update

  What happens on Firefox and everything I've tried so far - all financial sites, etc.

  original title: after the last update of Windows, my drop-down boxes no longer work correctly. I can't see drop-down options, except that they all show a moment together, but I can't choose anything. I need help here.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem, repost in the Windows Update Forum to the correct address:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• How to make the fields from the drop-down list required to make a selection before you save a PDF file

  I have a PDF form where I entered a JAVA script in some areas by using the option ON BLUR under 'Actions' and it works very well to prevent users to go to another site if they leave the field with the empty JAVA Script in place.

  My question is that I have other form fields that have a drop down menu where they can choose several options. I would also like to make these fields to where they can't move forward on the form unless they choose an option in the list. However, because with the option in the list "choose a ' is a default option entered into the field (field is not empty), script JAVA of BLUR ON option I used in my empty fields does not work to block the user to move beyond the matter without selecting an option. They are able to save the form with all the drop down menus staying to 'pick '.

  I made the field "Required fields" then they are highlighted with the red area around, but is there another tool to force them to choose an option for each in the drop down menus before you save the form, instead of being able to save with leaving the 'choose One' in the field by default?

  The best way to do this without knowing the default value of the field is to compare the value of the field to the default value of the field... You must make sure that your default value is not part of the possible acceptable answer. It works with most of the field types that a user can fill.

  If (event.value! = event.defaultValue) {}

  do something;

  App.Alert ("required field not completed. \nField name: "+ event.target.name, 1, 0);

  }

• History disappears and list drop-down lists/options in 10.0.2

  I have Windows 7 and recently installed Firefox, because I love to explore. I am running 10.0.2. When I click on any item to the taskbar, the drop down menu appear and disappear when I try to choose an option. The same thing happens when sites suggested/precedents are suggested for the new tabs and other Web sites. I can't select a because they disappear with the keystrokes. It's really frustrating

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• Part of the browser screen will flash intermittently and when trying to select a link out of my drop-down lists, click with the mouse selects the link above it.

  These problems occur only when you use Mozilla Firefox. I am using a Lenovo Thinkpad:
  1 site Web seem to flicker on the images, videos, maps, when the mouse moves around the screen.
  2 pointing the mouse over a link in the browser and a left click activating the link above (if it exists)

  Do not experience problems with google or ie. It started a few days ago.

  Thoughts?

  Hello paulo.eichelberger, try Disabling graphics hardware acceleration.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Open the Firefox Options window as follows:
     • Click the menu button

       

       then select Options.

  2. In the Options of Firefox window, click the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• Designer of the app - Multiple drop-down list option

  In application designer, while editing a page to a letter - I have a combo box where this box represents a table with patterns. The user to select a reason. There is a fairly simple way to allow the user to select several reasons? For example, hold down the CTRL key and have the ability to highlight more than one reason. I would then include the many reasons in the letter.

  It is possible with an area of html. In fact there are examples provided by PeopleSoft.

  Example: Advance opening search (Talent Management HCM)

  The idea is to create."html build and store it in the html area. When the user selects multiple values, the html box is stored with the selected values. But you must have write some simple code to extract multiple values selected in html, which is pretty simple.

• Problems with scripted patterns.  In the drop-down list, the trees do not appear and the box does not extend on the low side.

  I run Photoshop cc 2015, fully updated on a PC under windows 7

  Hi disable Question,

  The location of the tree models was changed to Filters > make > trees in Photoshop.

  Let us know if it helps.

  Concerning

  Sarika

• Drop-down list does not appear selected value

  Hello
  
  I have a problem. The output of a query results page. There are 2 fields must be updated: scholarshipID and amount. I want to update my request at a time. My dynamic drop-down list does not appear selected value. The value is there, but it does not recognize in the drop-down list. I could not find the error. My code is below, so please help...
  
  < name cfquery = "getStudentsData" datasource = "#application. DSN #">"
  Select StudentID, fname, lname, GPA, Tbl_Students.ID, ScholarshipID, rise, Tbl_StudentsScholar.ID as the SSID, AwardStatus
  of Tbl_Students, Tbl_ApplyYear, Tbl_EduBckgrnd, Tbl_StudentsScholar
  where Tbl_Students.ApplyYr = Tbl_ApplyYear.id
  and Tbl_Students.id = Tbl_EduBckgrnd.SID
  and Tbl_Students.ID = Tbl_StudentsScholar.SID
  and ApplyYear = 1
  and steps = 7
  order by studentid
  < / cfquery >
  
  < name cfquery = "getScholarship" datasource = "#application. DSN #">"
  Select AcctNum, scholarship, Tbl_Scholarships.id, Code
  of Tbl_Scholarships, Tbl_DistCode
  where Tbl_Scholarships.DistCode = Tbl_DistCode.id
  AcctNum order
  < / cfquery >
  
  < cfparam name = 'X' default '0' = >
  < cfparam name = default "CounterX" = "0" >
  
  <!--get scholarship-->
  
  < cfif getStudentsDataRet.RecordCount eq 0 >
  < class p 'paragraph' = > No Records Found < /p >
  < class p = "pageheight" > < / p >
  < class p = "pageheight" > < / p >
  < cfelse >
  
  
  < class p = "submitmessage" > records found - < cfoutput > #getStudentsDataRet.Recordcount # < / cfoutput > < / p >
  < table width = "98%" border = "1" cellpadding = "3" cellspacing = "0" style = "" border-collapse: collapse "bordercolor ="#000000"align ="center">"
  < class tr = "steptext2" bgcolor = "#999999" align = "center" >
  < td width = "10%" > Student ID < table >
  < td width = "9%" > name < table >
  < td width = "9%" > name < table >
  < td width = "5%" > GPA Cum < table >
  < td width = "5%" > account # < table >
  < td width = "5%" > < table > amount
  < td width = "20%" > account # | Dist Code | Scholarship name < table >
  < /tr >
  
  < do action = "updateAward.cfm" method = "post" name = "AwardForm" > "
  < cfoutput query = "getStudentsDataRet" >
  < cfif eq x 0 and x neq getStudentsDataRet.recordcount >
  < cfset x = 1 >
  < cfelseif x neq (getStudentsDataRet.recordcount + 1) >
  < cfset x = x + 1 >
  < / cfif >
  < class = "paragraph" tr >
  < td > #StudentID # < table >
  < td > #lname # < table >
  < td > #fname # < table >
  < td > #GPA # < table >
  
  
  < cfif AwardStatus eq 2 >
  < name cfquery = "getStudentsScholar" datasource = "#application. DSN #">"
  Select Code, Tbl_Scholarships.id, AcctNum, scholarships
  of Tbl_Scholarships, Tbl_DistCode
  where Tbl_Scholarships.DistCode = Tbl_DistCode.id
  and Tbl_Scholarships.ID = #getStudentsDataRet.ScholarshipID #.
  < / cfquery >
  < / cfif >
  < td >
  < select name = "" scholarshipID_ #X # "onChange =" showMessage_ #X #(this.options[this.selectedIndex].value) ">"
  < option value = "" > < / option >
  < cfloop query = "getScholarshipRet" >
  < option value = "" #id # "selected < cfif getStudentsDataRet.ScholarshipID eq id > < / cfif > > #AcctNum # < / option >"
  < / cfloop >
  < / select >
  < table >
  < td > < input name = "" amount_ #X # "type ="text"size ="5"< cfif amount gt 0 > value = ' #NumberFormat (amount, 99.99) # ' < / cfif > / > < table >"
  < td > < cfif AwardStatus eq 2 > #getStudentsScholar.AcctNum # | #getStudentsScholar.Code # | #getStudentsScholar.Scholarship # | #getStudentsDataRet.ScholarshipID # < / cfif > < table >
  "< input name =" "IndexID_ #x #" type = "hidden" value = "#SSID #" / >
  < /tr >
  < / cfoutput >
  < cfoutput > < input name = "CounterX" type = "hidden" value = "" #getStudentsDataRet.RecordCount # "/ > < / cfoutput >"
  < b >
  < td align = "center" colspan = "11" height = "50" valign = "middle" > < input name = "Submit" type = "submit" value = "Submit" / > < table >
  < /tr >
  < / make >
  < /table >
  < / cfif >
  

  the syntax is: getStudentsDataRet.ScholarshipID [1]

  where '1' is the line number to specify

• Why don't point in the drop-down list address not remove when selected and click on remove

  on version 14.1 - to remove an item in the drop-down address, said the point the address line the right click and select delete - this clears the address line but point remains in the drop-down list and does disappear not - why point unclear when you return to fall down to check this

  the system is XP and ff 14.1

  I think that you need for the arrow down to the element, so it is highlighted, and then press DELETE.

  (I meant the keyboard delete key, you can't right click on the drop-down list).