Drop-down menu used with anchor on the long table of data links

Similar Questions

• OfficeJet Pro 8600 appears twice in the selection of drop down menu printer with each of the different names.

  Hello!

  I recently acquired an Officejet Pro 8600 and immediately connected to my network wireless as stated in the manual. No other type of connection has been used beforehand and the operating system is Windows 7 64 bit.

  After that the installation of the printer driver appears twice each time that a program asks me to select a printer from the drop of the printing devices in the typical menu of preparation of printing.

  There is an entry for "Officejet Pro 8600 (network)" and something in the sense of 'HP95CDN' (Officejet Pro 8600). I can't remember the exact names off the top of my head, but it is the name of the printer with the 'network' in brackets in one case and a kind of shortcut ID printer with full name in parentheses in the other case.

  According to the program, one of the options gives the desired impression while the other simply causes a queue of indelible impression for the name of the unit in question that is stuck to a few KB of data transmission.

  Usually printing works with the device with the identification of the printer in its name, but I recently had a case where with LibreOffice printing only works with the other choice.

  Can someone explain to me exactly means?

  See you soon,.

  Pete

  Direct entry Wireless will be visible under menu so direct wireless is on... However, since you are able to print another icon (not the network icon) I assume direct wireless is off coz you will not be able to print from wireless directly on the printer if you are connected to the router.
  
  I believe that the icon of the printer (not the network icon) has a port WSD assigned and is automatically detected by the operating system and installed.
  
  Go to service window and check if you have any input that says function Discovery Provider Host and see if it is started. Try to stop the service, and remove the icon of the printer (not the network icon) in the print server properties.
  
  Restart the PC and check if the icon comes back or try to uninstall and reinstall
  
  Let us know the result

• When I click on a drop down menu, my options open to the left.  They used to open to the right, how to change this back to be able to open them to the right?

  When I click on a drop down menu, my options open to the left.  They used to open to the right, how to change this back to be able to open them to the right?

  Which is caused by a windows setting.

  http://timsneath.com/Windows-10-menu-alignment/

• How can I open Web sites that I put in the drop-down menu when I click on the blue arrow to the menu drop-down

  I have windows XP. I use msn.com for my homepage. I entered the sites I want to go to every day. These sites are in the drop-down menu when I click on the blue arrow down. When I click on any one of these sites, they are not open. What can I do to fix this.

  Your user agent shows you are running Firefox in compatibility mode for Windows 98 (NT 4.10).

  • User Agent: Mozilla/5.0 (Windows NT 4.10; rv:37.0) Gecko/20100101 Firefox/37.0

  Make sure that you are not Firefox running in compatibility mode.
  You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

• Drop Down Menu using CSS only

  Apex 3.2

  I created a drop down menu for my application by following this blog

  http://www.grassroots-Oracle.com/2013/05/CSS-pull-down-menu-using-Apex-list.html

  It works perfectly if my list has only one level, but I can't make it work for sub items.

  If I add a sub item to my list, then the whole menu displays incorrectly.

  Has anyone used this blog before

  I'll post on the blog, but it requires a google account, which I am not allowed to create

  Gus

  Hello Gus,

  Have you read the comment of ino?

  Thanks Scott, very useful.
  An update: it works if there are no submenus. For the same reason that you have described on the

  bug, you can edit the sublist with sublist elements to
  • #TEXT #.

    (extra

    at the end). Took me a while to understand why my submenus are not showing correctly, until I read your comment in the section 'Model sublist before lines'.

  It seems to me that that would solve your problem.

  Kind regards

  Kees Vlek

  -----

  Company: http://www.orcado.nl

  Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek

  Twitter: http://www.twitter.com/skier66

  + If the answer to question please change replied and mark the appropriate post as correct / helpful. +

• The drop down menu boxes that appear under the heading of Firefox do not fill. A form of box on the screen, but it is empty. Given zero no has not solved the problem.

  The file, editing, display and help tabs that were on the previous version of FireFox Menu bar top are apparently incorporated into the "FireFox" drop-down box in the latest version of the browser. I was unable to open those tabs earlier, so by the recommendation of the Support Forum, I have Firefox on my laptop. Now not only the tabs above are missing after this reset, but the drop down menu does not open in any submenus. What I see now is a box on the surrounded black screen, but sub menu selections such as save as, print, copy etc are not shown in the box. This is why the Navigator is not functional in its current state.
  Does anyone have a fix for this problem that will not delete my favorites and other content stored on Firefox? Please save me to return to Internet Explorer.
  AJJC

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• Drop-down menu SENDTO does not contain the same list as in the SENDTO folder in the User\Appdata\microsoft\windows\sendto folder.

  Prior to Win7 and Vista (seems to have the same problem), make a right click on a file would produce a drop down menu containing SENDTO containing various options like send this Word file, or write or Adobe or desktop (make a shortcut).  Other options of destination could be added by finding and opening the SENDTO folder and dragging shortcuts in there.  These added destinations would appear then in the menu drop down click the right button.  The feature doesn't seem to work in Win7.  The SENDTO drop contains the locations that are not in the SENDTO folder.  I've renamed the SENDTO folder to see what would happen.  Always in the same places appear in the menu dropdown.  It seems that Win7 has a situation he's going to other than the SENDTO folder.  Interestingly, I can add some program shortcuts in the SENDTO folder and they will appear in the drop-down list, others do not like the trash.  There are items in the drop-down menu are not in the SENDTO folder.  Help Help

  Click on the round of Windows (start), type shell: sendto and hit enter, add or remove shortcuts. Is it now behave properly?

  I forgot to post the location of SendTo folder, it's C:\Users\UserName\AppData\Roaming\Microsoft\Windows\SendTo

• Populating a drop-down menu form with the values from MySQL database

  I'm creating a simple CMS that will allow staff to add new items on their site (sale of furniture).

  I want them to be able to choose from the list of values for some fields to ensure that the items are displayed on the website correctly (IE to avoid typos etc.).

  I have spent a lot of time to trawl forums and have so far obtained the code below.  When it was working I could only get the dropdown menu options of data contained in the database, as opposed to the list of DEFINED values that initially, I would put in my database.

  For example under the field named 'Type', I assigned these values: all ('table', 'chair', 'buffet', 'convenient', 'bottles', 'library', 'mirror', 'drawers','s chest', 'display', 'tvunit', "bedside", reads, "wardrobe", 'dressingtab', 'blanketbox', 'Office', 'filing cab', "workstation")

  Here's what I want to display in the drop-down, not only the five values of elements already in it.

  However, my CMS page is nothing display now not in the drop down and I can't understand why not!

  So my question is, first of all any ideas what's wrong with my code?  And second, how to fill the bottom of the fall with SET values?

  Thank you very much in advance for your help!

  I didn't want to bore you, then the code below is just the bit that is relevant to my question, rather than any connection $POST and info php etc.

  It is in my code php at the top of my page

   $sql = mysql_query("SELECT DISTINCT id, supplier, room, type, material, finish, bespoke, image FROM furniture ORDER BY ASC");
  
                      while($row = mysql_fetch_assoc($sql))
                      {
                  $supp .= "<option value=\"{$row['supplier']}\">{$row ['supplier']}</option>";
                  $room .= "<option value=\"{$row['room']}\">{$row['room']}</option>";
                  $type .= "<option value=\"{$row['type']}\">{$row['type']}</option>";
                  $material .= "<option value=\"{$row['material']}\">{$row['material']}</option>";
                  $finish .= "<option value=\"{$row['finish']}\">{$row['finish']}</option>";
                  $bespoke .= "<option value=\"{$row['bespoke']}\">{$row['bespoke']}</option>";
                      } 
  

  It's in my html code

  <form action="<?php echo $editFormAction; ?>" method="POST" enctype="multipart/form-data" name="form1"  id="form1">
  
                  <label for="supplier">Manufacturer</label>
                  <select name="supplier" id="supplier" title="<?php echo $row_add['supplier']; ?>" >
                    <? echo $supp; ?>
                   </select>
         
  
                   <label for="room">Room</label>
                  <select name="room" id="room" title="<?php echo $row_add['room']; ?>" >
                    <? echo $room; ?>
                   </select>
  
                         <label for="type">Type</label>
                        <select name="type" id="type" title="<?php echo $row_add['type']; ?>">
                         <? echo $type; ?>
                        </select>
     
  
                        <label for="material">Material</label>
                        <select name="material" id="material" title="<?php echo $row_add['material']; ?>">
                        <? echo $material; ?>
                            </select>
         
                            <label for="finish">Finish</label>
                        <select name="finish" id="finish" title="<?php echo $row_add['finish']; ?>">
                          <? echo $finish; ?>
                            </select>
     
                         <label for="bespoke">Can be made-to-measure?</label>
                         <select name="bespoke" id="bespoke" title="<?php echo $row_add['bespoke']; ?>">
                        <? echo $bespoke; ?>
                        </select>
  
                                <input type="Submit" name="Add" id="add" value="Add" />
                        <input name="date" type="hidden" id="hiddenField" value="<?php echo $todayis['date']; ?>">
                        <input type="hidden" name="MM_insert" value="form1" />
                        </form>
  

  > So, don't you think not with my different approach?

  Yep, that's how it should be done.

  Note the OP also mentioned that they are filled with 6 drop-down lists:

  > 6 fields I want to post, drop downs in my a form are: provider, room, type of material, finish and custom.

  So you can create a table for each separate... but what I would probably do is store everything in a single table (depends of if you need to store additional information or if it's just a list of choice):

  optionsTbl

  Category ID value

  ------------------------------

  1 provider abc

  2 vendor xyz

  3 living room

  4 dining

  Enter values using a set of multiple records in the query: Select value of optionsTbl category WHERE = 'suppplier. " Select the value optionsTbl category = "room"; etc.

  Then fill the drop-down lists by looping through each query in the recordset and use next_result() to perform a loop on the next game.

• Remote index not used with INSERT in the local table on dblink

  Hi all
  
  I don't know if anyone has come across this problem before, but for some reason any the remote index remains unused ONLY* in the insertion on the local database operation. Let me explain this pseudo-device code
  
  insert into LOCAL_TABLE
  Select / * + index_combine (alias_remote_tab IDX_LOG_DATE) * /.
  trunc (log_datetime),
  Count (*)
  of REMOTE_TABLE@DBLINK alias_remote_tab
  When trunc (log_datetime) = trunc(sysdate-1)
  Trunc Group (log_datetime);
  
  where:
  REMOTE_TABLE is a table partitioned on log_datetime (monthly)
  IDX_LOG_DATE is an index of bitmap of based on a valid function on log_datetime created in the trunc (log_datetime)
  local database: 10 gr 2
  remote database: 11 GR 1 material
  OS: windows (both)
  
  More funny thing is when I just run the select query independently on the only both local and remote, the index is used. I checked by printing the command explain for the select query plan. But when I prefix the query with the insert lose all hell breaks and local database plays the ignorance about the index. The command for the insert query explain plan has no mention of the index even when I explicitly place the index indicator in the select part of the query.
  
  If this should not be simple enough for ORACLE? Am I missing something here?

  Jonathan describes the details and the reasons for the behavior you see in following blog post http://jonathanlewis.wordpress.com/2008/12/05/distributed-dml/
  Your SELECTION is performed remotely (filtering and grouping) and sends only the (relatively) small results via dblink local database while the in an INSERTION, filtering only occurs at the remote and data site (relatively) important are sent via dblink to the local database, the consolidation takes place.
  You can give a try to the approach proposed by michaels2. If the approach from the view result grouping and filtering which will take place in the remote database, you will see improved performance.

  PS BTW, if the sql code that I suggested to check the plane, in my previous post using an index, then the cause of your performance issue is certainly not due to the index not used and is due to the amount of data transferred to dblink.

• How to prevent the drop-down menu when you click in the URL field?

  Hello

  For some time there is Safari displays a short title in the URL field when you view a web page (for example, at the moment it says "Apple Inc").  Quite often I want to drage the actual URL in a note or on the desktop for later use.  Whenever I click in the URL field to do this, Safari down a bunch of icons corresponding to the bookmarks in the bookmarks bar, which is useless as my favorite bar is always visible.

  What I would do is to disable this action so that when I click on all I get is the URL so I can drag it somewhere.  Quite often when I drag the URL and domain of Favorites icons is visible, Safari think I want to lodge in this area and therefore mixes the existing icons around according to what path taking when you drag.  It's really very annoying behavior and there must be a way to disable.

  Thank you!

  -Tod

  

  Safari > Preferences > search

  Uncheck the "Show Favorites".

  

• drop-down menu is not displayed on the preview or the site online

  I created the folder under plan in Muse but don't show on overview and live site... What I've done wrong?

  Have you checked the possibility of revealing 'All the Pages' in the sidemenu of your navigation menu widget?

  

• Drop-down menu horizontal list - change how to open the Sub Menu entry

  Hi all

  Thank you in advance for your time and your help and please excuse my English, this is not my mother language.

  I have a little problem with the list of the menu drop down, I use it instead of the tabs to navigate through my application and now I have users who want a larger arrow / select the field to open the menu void entries. I did a screen capture to make things more clear, but it seems that im not allowed to attach photos to this post.

  The problem is, you have to click on the small arrow - no area is valid to open the submenu and I do not see the possibility to increase the arrow or use a larger space.

  I googled already for a long time but could not find anything specific on the change of this arrow. He could only do a little bigger, or all simply to use the whole of the area to the right of the label in the list drop down Parent (which is a link itself).

  I hope you can provide some ideas how to handle this problem.

  Best regards

  Christian

  Edit: We use: Application Express 4.2.3.00.08

  Hello

  I think that the image does not come from CSS file.

  I can see the source HTML of this image is defined by the img tag.

  Then you should be able to change when you change the list template

  13.2 customization of models

  13.2.10 models list

  Kind regards
  Jari

• Some element of the third level drop-down Menu is invisible

  APEX 4.2

  Oracle 11i

  area type: list

  list template: drop-down menu

  Requirement: I created the menu list with level 3 model, but found that some element of the third level is invisible, sometimes, someone has experienced this problem?

  How can I show the whole issue?

  Better compliance

  Yong Huang wrote:

  Thank you very much, you are right, it worked when I changed the target type of URL without a target.

  But the new problem is that cannot save changes implemented which target URL, it was recovered on the page target type in the application to the next time. How do I do? Like a menu, I have to put the page number to the target.

  and why target page type the application cannot show normally?

  This is because (at least in the example you provided) to two factors:

  • A 'feature' the theme 21 Pull Down Menu model list, which seems to be so designed as not to display a link to the current page. The current definition of model sublist will render an image of separator rather than the list entry/link:

  • 

  • Your entries of the list all link to the same page.

  So to determine which model of list item to apply using the list input parameter current that current page is the target by default, APEX motor sees all of the entries in the form of links to the current page and presents them by using the current model sublist list item template as a separator.

  All of your entries of the list really related to the same page? If so, why is this? What you trying to do? There may be other ways to address the issue that you have not considered.

  If you really must use a dropdown menu with multiple links to the same page here, then there are two options:

  • Continue to use the list template Pull Down Menu provided, but put in place a framework of Expression PL/SQL or SQL query to determine the current list entry.
  • Create a copy of the Pull Down Menu model list and change the current model sublist definition so that the list entry appears in fact.

• Attempt to bind the drop-down menu to dynamically fill Textfield

  I had trouble to come with the script for calculating appropriate for this question and I was wondering if anyone would be able to help me.

  Basically what I'm doing, it's down a product Option Drop (let's call it "RS1") to dynamically fill a separate price/text ("Price RS") field based on the selected product in the drop down menu.

  Product in the menu options drop-down are 'single' and "Double".

  If I select the option of simple product, he would fill in the price with a price $345,00 field. If I had to choose the Double product option, it would enter the price with a price $565.00.

  
  

  The intention is to multiply what fills pricing by a separate drop-down field that I already have in place that measures the quantity of the item to get a total final for this order of products.

  
  

  I know this should be relatively simple, but I can't get my calculation script to work for the life of me. Any help is greatly appreciated!

  You can use this code as a custom text field calculation script:

  var v = this.getField("RS1").value;
  if (v=="Single") event.value = 345;
  else if (v=="Double") event.value = 565;
  else event.value = "";
  

  Make sure that you set the option to validate the value selected from the drop-down field immediately for the calculation to occur as soon as the selected takes place in the menu dropdown.

• CSS Drop down menu; How to align the edge right of the menu drop down and the parent menu?

  Hi all
  
  I have a drop down menu that works well.
  
  The only change that I need to do is to have the right edge of the drop-down menu below to align with the right edge of the parent menu. When you hover over the menu, it currently "injects" down and to the right, with the left edges aligned.
  
  I want the menu to 'drop' down and to the left, so the straight edges are aligned.
  
  I tried fiddling with floats and absolute/relative positioning. I don't know what needs to be changed.
  
  You can provide any assistance is greatly appreciated! I learn through 'cut and paste', please go easy on any terminology you can use.
  
  Thank you!
  
  Here is my code:

  .chromestyle{
       width: 100%;
       font-weight: bold;
       float: left;
       height: 29px;
  }
  
  .chromestyle:after{ /*Add margin between menu and rest of content in Firefox*/
  content: "."; 
  display: block; 
  height: 0; 
  clear: both; 
  visibility: hidden;
  }
  
  .chromestyle ul{
  border: 0px solid #BBB;
  width: 100%;
  background: url(chromebg.gif) center center repeat-x; /*THEME CHANGE HERE*/
  padding: 4px 0;
  margin: 0;
  text-align: right; /*set value to "left", "center", or "right"*/
  }
  
  .chromestyle ul li{
  display: inline;
  }
  
  .chromestyle ul li a{
  color: #000000;
  padding: 4px 7px;
  margin: 0;
  text-decoration: none;
  border-left: 1px solid #DADADA;
  }
  
  .chromestyle ul li a:hover, .chromestyle ul li a.selected{ /*script dynamically adds a class of "selected" to the current active menu item*/
  background: url(chromebg-over.gif) center center repeat-x; /*THEME CHANGE HERE*/
  }
  
  /* ######### Style for Drop Down Menu ######### */
  
  .dropmenudiv{
  position:absolute;
  top: 0;
  border: 1px solid #BBB; /*THEME CHANGE HERE*/
  border-bottom-width: 0;
  font:normal 12px Verdana;
  line-height:18px;
  z-index:100;
  background-color: white;
  width: 200px;
  visibility: hidden;
  }
  
  
  .dropmenudiv a{
  width: auto;
  display: block;
  text-indent: 3px;
  border-bottom: 1px solid #BBB; /*THEME CHANGE HERE*/
  padding: 2px 5px;
  text-decoration: none;
  font-weight: bold;
  color: black;
  }
  
  * html .dropmenudiv a{ /*IE only hack*/
  width: 100%;
  }
  
  .dropmenudiv a:hover{ /*THEME CHANGE HERE*/
  background-color: #0000ff;
  color: #fff200;
  }

  How about this?

  http://ALT-Web.com/demos/right-aligned-CSS2-Horiz-drop-menu.shtml

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB