Drop ID vs Reset

Similar Questions

• Atheros AR9002wb-1ng constantly need reset troubleshooting

  I have a laptop ASUS N53SV card Atheros AR9002wb-1ng. Last week, the connection continues being dropped randomly and reset of the card is the only thing that will fix it.

  I already tried things:
  • Change the channel on the router (it goes from 1 to 11, no difference)
  • Disabling the adapter power management settings
  • The reactivation of the adapter power management settings
  • Install a new driver (from what I could find, I could have done this wrong)

  And finally:

  • Uninstall the card completely and restarted my computer, which he has reinstalled everything from scratch.

  It was the last thing I did to try to solve the problem. It worked for about an hour, but now I have a new problem: troubleshooting tool resets over the adapter, then now, I do it manually each time by the Manager of devices of deactivation and activation (which I do every 10 minutes approximately).
  Do you think this could be a hardware problem? I don't know what to do to solve this problem.

  Hello

  Have you checked for updated firmware for the router?

  Collate ASUStek support, their drivers and documentation online and ask for their
  Forums about known problems. There may be a problem hardware or driver known with
  solutions.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  Also check with Atheros updated drivers.

  Drivers Atheros WiFi.
  http://www.Atheros.cz/Atheros-wireless-drivers.php

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Internet connection Cox Cable &amp; Airport Extreme

  I had the last three or four months a problem with Internet cable fall suddenly. All the lights on the modem cable have no problem with the modem. The Airport Extreme base station has a green light, as well. I have to keep resetting the modem cable 3 - 4 times a day. The ISP is Cox Cable.

  It affects all the iPhone, phone Android, iPad and other Apple computer, we have. All lose connectivity at the same time. If I connect to the Mac mini directly to the modem cable by the cable network the internet connection gets dropped without using the WiFi network.

  1 does anyone know conflicts between modems Motorola and Apple Airport Extreme networks?

  2. what else can I check or try to fix it?

  Airport Extreme: How would I test for a problem with the unit master of AE? The only thing I can think to do is reconfigure AE units and using one of the older AE devices as master and see if that makes a difference, but it's a headache to do if there is an easier way.

  Our WiFi network consists of a base station Airport Extreme 802.11ac with two base stations older AE acting as slaves to the base ac station to expand the network throughout the House. All base stations are running the latest firmware from Apple (7.7.3 & 7.6.4 on two more former slaves). The light remained green for disconnects. We have previously disabled IPv6 in Airport utility on the base station to avoid potential conflicts with the Cox' months before the start of this issue of network.

  Cable modem: Motorola MB 7420 - Cox says he could be the modem, so I bought a new modem cable Motorola MB7420 to replace the former Motorola cable modem - always have the same reduced connection problems. The cable modem shows any change in status or lights during connections has dropped, but only reset the cable modem seems to fix the problem. The two modems are not any lights/status change, but there is no internet connection, even if a computer is connected directly to the cable modem once the connection is released. I kept it connected and had it remove the connection to the internet again after resetting the modem (hours between the drops).

  I tried to connect a computer directly to the modem cable with a network cable and had the same problem, so I thought that I had deviated from the Airport Extreme base station as the problem. Now Cox claims that something came out last week, discussing the problems with Apple routers and cable modems or their network. I can't find anything, but they are supposed to send me information later.

  Coaxial connection: Cox is not finding any disconnection or time in their voting for our modem registers. We had three times to check the lines as he first seemed extremely windy Cox and had a problem before with problems connecting to the pole. Who was waived. They tested the connection between the pole and the cable modem, and we get a signal strong; some problems on the survey for our modem logs (every two hours). There is no water in the connections between the pole and the House. We have checked all the connections of the coaxial cable between the outer box and the cable modem. Cox is to revisit all connections around our House to see if they can find no evidence of a problem upstream or downstream from our part.

  Network cables: I replaced network between the cable modem and AE cables as well as AE to a computer next to him - no change.

  1 does anyone know conflicts between modems Motorola and Apple Airport Extreme networks?

  There are at least two known issues with Cox here on Apple's Support communities:

  1. Cox started the IPv6 role. The current workaround is to configure your AirPort base stations to use IPv6: link-local only.
  2. The series of Arris/Motorola SB61XX modem is incompatible with 802.11ac AirPort base stations (potentially, 802.11n models as well.) This is not bad in themselves, they just don't "play well" together. I have not heard of all reports on the series of MB74XX... so maybe it's not the question on this point.

  To test the incompatibility, check the ARP cache. It must contain only around a dozen entries. Considerably more could possibly indicate a problem.

  Run the network utility > Netstat tab > select the option "Display routing table information" > click Netstat

  Note: For OS X El Capitan, network utility can is located in Macintosh HD > system > library > Basic Services > Applications, OR via the Apple Menu > about this Mac... > system report > Tools menu of System Information > window > network utility

  To change the IPv6 configures your airport most convenient base stations you use AirPort Utility, as follows:

  From a Mac:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
  • Select the Internet tab and then, select Internet Options...
  • Change the IPv6 configuration to: link-local only
  • Click on save and then click Update.
  • Allow the base station restart.
  • Do this for each of your base stations.

  Starting from an iOS device:

  • Tap the AirPort Utility to run it.
  • Select the base station.
  • Press Edit.
  • Tap advanced.
  • Tap on IPv6.
  • Change the IPv6 configuration to: link-local only
  • Type actually.

• Question of tool Presets

  I'm trying to understand how to manage custom tools in Photoshop CC 2015 (latest version).

  Background: I got three .tpl files for a lynda.com course "Photoshop CS6 News: brushes."  Let's call them, X.tpl, Y.tpl and Z.tpl.  In the preset manager, I put the Preset Type = tools, then charged each of the files .tpl using the button load.  As each loaded file, the preset in the Preset Manager list grew. The list is in alphabetical order, while it was impossible to say what predefined have been newly added to each pressure on the Load button.

  Here's my question: in the preset manager and the tools Panel preset, the flyout does not display the predefined custom tools that I just loaded.  In other words, it does not display a X, Y and Z.  It shows only the predefined default settings.  If I want to delete one of the custom tool presets I just added (say those of X.tpl), the only way I can see to do is restore the default settings (drop-down menu-> reset the predefined tools).  But then I lose ALL the presets of X.tpl, Y.tpl and Z.tpl.

  Here's my question: How can I determine which tool presets comes from a given file (say X.tpl), and how to manage these presets independently of the presets added from a different file (say Y.tpl)?

  Because I couldn't find a way to make the inside of Photoshop, I looked in the Windows file system for where Photoshop can have stored tools built-in, thinking I could simply remove them.  But there are no files with the extension .tpl anywhere in [drive]: \Users\ [user] \AppData.  Clearly, Photoshop is hiding in a magical place.  Is it possible to manage the presets in this way?

  Problem solved.  I had put the .tpl files in the wrong directory.   After I moved into the correct directory...

  [drive]: \Users\ [Username] \AppData\Roaming\Adobe\Adobe Photoshop CC 2015\Presets\Tools

  ... and restarted Photoshop, I now see X, Y and Z menu drop down preset tools.

• Hi i ' v you have some problem with subscription.

  I buy two days before and pay with my credit card. Day passes and I can't use it cause it still shows buy now. What should do? Can I get refund my money necessaries and cancel?

  It's easy on Windows 7, you can simply run Fix tool, it will drop to automatically reset the hosts.

  But for 10 Windows, you must manually change.

  Follow the procedure mentioned below the link for Windows 8/8.1 [applies to Windows 10 institutions]

  https://support.Microsoft.com/en-us/KB/972034

• Since a recent issue of app updates on my iPad a applications - Gummy Drop mini disappeared and there seems to be no update in my update of the applications list or I can delete. I tried a reset nothing helps. What can I do? Thank you very much. Steve.

  Since a recent issue of app updates on my iPad a applications - Gummy Drop mini disappeared and there seems to be no update in my update of the applications list or I can delete. I tried a reset nothing helps. What can I do? Thank you very much. Steve.

  Not quite sure what "disappeared" means. You can try to remove and re - download.

• I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  Anything can be corrupted on your MacBook Pro, but from what you say, it seems that the cable drive/SSD/flash memory/SATA hard was seriously damaged. Him "question mark" means that your Mac is unable to find any bootable device, meaning that it does not yet detect your OS X drive.

  You should make a backup of your files (if you can still do it) and take the Mac at the Apple Store or dealer to get a diagnosis. There may be several damaged parts.

• After about 10 minutes connected my connection drops and I have to keep resetting my hub [BT Hub]

  After about 10 minutes connected my connection drops and has you keep resetting my hub [BT Hub]

  Hello

  What operating system is installed on the computer?

  Method 1: I suggest that you follow the instructions from the link and check if that helps:

  http://BT.custhelp.com/app/answers/detail/A_ID/7609/~/my-broadband-connection-keeps-dropping

  Method 2: Follow the steps in the link and check if it makes a difference:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Drop-down list not reset default

  I can not get the dropdown to work as I need. All things considered, this seems to be the best control for what I need but I can't seem to restore the default option.

  When an option is selected, I perform an action in a text window. It is very good. But the option is selected, and if I want to perform this same option, once again, the request is ignored. Choose another option then go back and it's ok.

  What I want to do is a default option, just "select an option" is displayed after each selection.

  I can't understand any combination of sets/resets option indexes or slots that will do that for me.

  Well I just tried to not delay reset.

  No doubt you've already tried this, but only to avoid you through all combos yet would be some sort of delay (possibly QTimer like eloise suggested) into the slot of onSelectedIndexChanged drop-down setting SelectedIndex = - 1;

• Impossible to delete previously selected items from the drop-down lists at the click of the button Reset on a page of the screen.

  Hello

  I'm unable to clear previously selected items from the drop-down lists at the click of the button Reset on a page of the screen. The code I did to clear the previous value when the click on the button Reset is as below.

  {} public void onReinitialize (ActionEvent actionEvent)

  System.out.println ("onReinitialize is called ::");

  UIComponent uiComp = actionEvent.getComponent ();

  If (uiComp is nothing)

  {

  otherwise we use the button that we linked to that bean

  uiComp = getButtonResetByBean ();

  _logger.info ("reset fields: buttonID =" + uiComp.getId ());

  }

  on the other

  {

  _logger.info ("reset fields: CompID =" + uiComp.getId ());

  }

  Pass the component inside the uniforms, UIXForm, UIXSubform, UIXRegion, UIXPopup, RichCarousel

  or RichPanelCollection that contains the components to reset

  getTextIDLOV () .setValue (null);

  ResetUtils.reset (uiComp);

  }

  ---

  Using this code Iam able to clear the entrance to the text box but can not clear previously selected items from the drop-down lists when the reset button is clicked

  Can anyone please help on this issue.

  It's simple, you can set GenerateIsNullClauseForBindVars = "false" in the viewCriteria who created in EmployeeView

  After doing that it will fill the list of employees only after the Department selection

  Again check the enclosed application

  Ashish

• Put the Drag and Drop cursor reset and confirm buttons

  Is it possible to get the hand cursor when flipping the reset and buttons send you in doing drag and drop interactions? I use 8 Captivate.

  

  Sorry, I don't see a way. These buttons are using the button Quiz style, and although Quiz buttons get the default hand cursor, this is not the case for the D & D buttons. Maybe you could file a feature request, really seems a valid request:

  Feature request/Bug Report Form

• Drop-down list interaction - reset

  Hello

  I use 8 Captivate to create a sensitive project. On a blade of 'menu', I've added two drop interactions and an OK"" button. The result of the selection of the User Guide which slide I jump too when the user press the GO button. When I run the project first, everything works as expected. When I go back to the menu slide and change the values in the drop-down; the new values do not seem to be recognized. I added two text boxes and lists the contents of the variables assigned to the drop-down boxes. First, the text boxes show the correctly selected drop-down list values. Return to the menu, the variables are not updated with unrolling newly modified values. How can I reset this interaction during the load of the slide menu?

  Thank you

  Peter

  Hello

  I was able to reduce it to a problem IE 11, since the same project works fine in Chrome and FireFox. Support Adobe indicates that it is a known and open problem that will be fixed at some point in the future. For the moment, since 95% of my user base is IE11, I can't use the pull down menu interaction in a sensitive project. Thanks for your help and de3bugging suggestions. I appreciate it!

  Peter

• Data from the field drop-down list does not clear when the reset button is activated

  Acrobat Pro XI

  All field boxes are checked in the tab properties of the button actions... but when I click on the reset button of the form I created only the data in clear text fields, not any of the data that has been selected in a drop-down list.  What I am doing wrong?

  The 'rest shape' command returns the fields to their default values. If this

  value is not empty, that's what he'll be back.

• 6.1: drag and drop slide on enter reset

  How can I reset all the objects on a drag and drop slide on enter Captivate 6.1 using the integrated brake and drop the widget?

  Hey Savy,

  Drag and Drop Interaction works similar to another question slide if it is included in the Quiz. IE if you answer it correctly, or if your attempts are more then it wont allow to resume interaction drag / move with in the same scope of Quiz. But if you try several Quiz (Quiz preferences > Attemps), it allows to resume interaction in your next Quiz attempt.

  or if it is not included in the Quiz, it resets the interaction on each slide to enter.

  Please submit an enhancement request in "Drag and Drop of the success of the legend. Link http://www.adobe.com/go/wish

  Thank you

  VERALINE Sukumaran.

• reset the number of subform based on the value of the selected drop-down list

  Hello

  I have a questions.  I have a form called request.  Inside of the application form, there is a subform called MultiForm, which is repeatable.  Application form has a drop down DropdownList1.  MultiForm has buttons 'Add profile' and 'delete profile '.

  The form is the first launch, query appears with DropDownList1, MultiForm button "Add Profile".

  That the user clicks on "Add Profile", a second MultiForm is insert.  On this second MultiForm, there is the 'Add Profile' button and 'delete profile '.

  When the user change the value of the DropDownList1, I want the number of MultiForm reset so that it has only this MultiForm.  The 2nd, 3rd, etc., MultiForm is deleted.

  Also, I want the "Add Profile" button to show only on the first MultiForm, not the subsequent MultiForm.

  I came with the scripts below:

  Remove MultiForm (added under the change event for DropDownList1.

  function resetMyForm (myForm) {}

  var vCount = myForm.count;

  If (vCount > 1) {}

  If (vCount == 3) {}

  myForm.removeInstance (2);

  myForm.removeInstance (1);

  } ElseIf (vCount == 2) {}

  myForm.removeInstance (1);

  } else {}

  do nothing

  }

  } else {}

  do nothing

  }

  }

  -The reason this function works for me because I'm only accommodate max 3 MultiForms to insert and there is always a MultiForm on the page.  I'm looking for a more "dynamic" script instead of the 'static' script above.  Any suggestions would be greatly appreciated.

  Also, I have another question: I want the "Add Profile" to be present on the first MultiForm only.  As new MultiForm added, I don't want the "Add Profile" button to display on the subsequent MultiForm (with the exception of the first form)

  Is there an example of a function that I can use?  Where should I insert this function?

  Thank you very much for your help.

  Hello

  A quick fix would be the setInstances() method.

  I'm surprised you found removeInstance() to work without calling instanceManager or trait shorthand (_) underscore.

  _myForm.setInstances(0); // remove all instances
  _myForm.setInstances(1); // create a new blank instance
  

  Hope that helps,

  Niall