Drop in power during an A2109 charger.

Similar Questions

• Loss of power during disk defragmentation

  I used the Disk Defragmenter in Windows XP on a volume formatted to NTFS and during a defrag of my external hard drive, the power went off in my house all of a sudden (I triggered a circuit breaker). When I got the power back on, the drive seems okay, but I scanned the disc using Chkdsk in Windows. I checked "Automatically fix errors" and everything he said after it was done was "Disk Check in line." My hypothesis is that the file system is in good health, but the loss of power during defragmentation might affect the files on the disk?

  I used the Disk Defragmenter in Windows XP on a volume formatted to NTFS and during a defrag of my external hard drive, the power went off in my house all of a sudden (I triggered a circuit breaker). When I got the power back on, the drive seems okay, but I scanned the disc using Chkdsk in Windows. I checked "Automatically fix errors" and everything he said after it was done was "Disk Check in line." My hypothesis is that the file system is in good health, but the loss of power during defragmentation might affect the files on the disk?

  =====================================
  I guess that your drive is secure, but you can view
  the newspaper of verification errors (chkdsk) to the following location:

  In Windows XP to find the error checking log file...
  Reach... Control Panel / Administrative Tools / Event Viewer /.
  Application / Wininit or Winlogon [Source]

  John Inzer - MS - MVP - digital media experience

• Loss of power during the Installation of Windows Vista, need help

  Recently reformatted my laptop, a loss of power during installation and now when I turn it on I get the same message telling me that the computer stopped unexpectedly during the Windows Installation, press OK to restart your system. (Not a quote).  When it restarts, it continues at the same point and I get the same error message.  No disk Windows Vista, it's a computer laptop gateway and I have been using the Recovery Manager operating system is stored on the laptop.  Help, please.

  http://support.gateway.com/support/default.aspx

  Contact Gateway and ask them to send you a set of recovery Vista disc/s.

  Normally, they do this for a cost of $ small.

  If you can not now use the recovery partition to reinstall Vista, contact Gateway on the Support.

  It's their recovery partition, not Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  Hi Arvin,

  The question you posted would be better suited in the Xbox Forums. I would recommend posting your query in the Xbox Forums.

   

  Welcome to the Xbox support

  http://support.Xbox.com/en-us/

  Hope this information helps.

• substitute the new power cord on the charger?

  I have a MACBOOK pro... the cord to alveoli? It has been is so frayed since I am under warranty they sent me a new. I need instructions on how to replace it on the charger. I'm out of the country on a small island so I can't communicate with them... Please help me find video or instructions. Thank you

  Look at the photos in this article:

  Find the right adapter cord for your laptop Mac - Apple Support and sector

  the AC power cord slips laterally for removal and replacement "block". Does have a substantial 'push' to begin to move.

• Loss of power during the update of BIOS on Satellite A110

  During a BIOS update using WinPHlash power was interrupted and now my Tosh Satellite A110 is unresponsive.

  I think the BIOS is now corrupt or non-existent.
  I searched the net solutions and found nothing that works so far.

  I know that I'm a fool to try to Flash a bios under Windows but I did and now I need a cure.

  Thank you, in advance, to all those who responded to my call for assistance.

  Yes, you are right; the EPROM module was not properly flashed.
  In this case, the BIOS is corrupt and the laptop does not work.

  Solution: the EPROM module must be flashed once more use special disc of crisis of the BIOS.

  To perform this procedure to update the BIOS crisis, you need the BIOS (traditional version), BIOS crisis disk along with the step by step instructions.

  Unfortunately, this special BIOS crisis disk isn't available for download. It of available only for service technicians authorized.
  But I also read in various forums about successful re-flash BIOS.

  For example in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=79257

  Check it out. Maybe it will help you. Otherwise, you will need to get in touch with partners in local service to Flash the BIOS again.

• SatelliteU300 will not start with power connected and fully charged battery

  I just bought a U300-13U. It works fine when charging the battery and AC is connected. However, if left to recharge completely it does not start with connected AC. Unpluging the power or remove the battery and running on AC make it work very well. Is a 'feature' to stop an overload or overheating of the battery, or just a problem with this machine. I want to run with AC and battery than both connected all the time like I did with all my other laptops.

  Any help appreciated.

  Hello Andy

  Of my friends has this small U300 and everything works well. I got it a few weeks ago to test the family Windows XP Setup and it works perfectly.

  Please test again very carefully and if the same thing happen again once I recommend you contact the Service partner in your country. They check your laptop. I have to be honest and say that describes the problem of strange sounds to me and please, don't wait too long. Contact the service as soon as possible.

  Bye and good luck!

• Battery power: "plugged in, not charging".

  When I pass the pointer of the mouse over the battery meter I get a message: "plugged in, not load" battery power is down while I plugged m.
  How can I activate the charging?

  [Moved from comments]

  You're stack is more likey dying. Consider getting a replacement for your laptop. See the documentation for OEM (manufacturer)

• Means the message: "power plugged in, not charging battery" average my laptop battery is dead and needs to be replaced?

  I use a HP laptop which gave problems lately. When I plug in the power socket, the following message appears when my mouse pointer is on the icon on the taskbar of current:
  0% available (plugged in, not supported)
  Does this mean it's time to replace my laptop battery?

  Hi Mr Ohm,

  1 does your laptop charged when you turn it off?

  2. you remember to make changes to the computer, after which the issue started?

  Take a look at the following link:

  Charger plugged in, but does not charge

  Alternatively, you can contact HP to ensure that it is not a hardware problem:

  Contact HP
  

• Loud beep and the power on / off power during installation of the operating system 10.11.2

  Someone else did this happen to them? My MacBook Pro (early 2011) making a loud beep sound and the power and turn off several times while he was installing the new os 10.11.2 update this morning? Everything seems to work fine, I've just been caught unawares. I've never had such a thing happened to me in updating my mac. Someone else?

  can happen

  I think the install dialog says that the mac can shut down and put into service once more.

  If its works well it should be good.

• iPhone 5 c has no power this morning after charging all night.

  The completely black screen - cannot supply extinguished/turned on. I tried calling my phone at home and it does not sound. The last month or so he had felt like he wasn't responding to my touch as she had before.  Do you think it's just old/needs a new battery?   Thank you

  Hi sarahbapple,

  Looks like you are unable to charge your phone at all. From what you describe, it could very well be a bad battery, but before you jump to that conclusion, I would suggest to take a look at this article from support on this kind of problem:

  If your iPhone, iPad or iPod touch does not respond or won't turn on

  https://support.Apple.com/en-us/HT201412

  Thank you for using communities of Apple Support.

• WRT1900AC 5 GHz speed internet a drop to zero during a short period

  Hello

  Could you please help me with this question. I ' v had the router for a few weeks and only reviews the issue when I download large files, the drops of speed to zero and I momentarely loses internet connection, only so that it can be restored shortly after. It continues to go like that in the waves. (There is no disconnect/reconnect the router).

  It only happens when I use 5 GHz. There is not such a problem with 2.4 ghz

  I tried all the different parameters (from mixed 802. 11A & n and a/d) and the widths of different channels. Firmware is updated through automatic update.

  There are no other networks of 5 GHz around me.

  My other PC is connected via a cable and have no issues.

  My wireless card is killer Wireless - n 1202

  With the help of windows 8.

  Thank you

  I suggest to disable the automatic update, it's a bad idea. Then since there are already old, you can do a factory reset and the config from scratch. Which has been shown to solve a lot of weird problems.

• Lightroom will not open Win, computer lost power during import and a cache problem

  As I import photos into Lightroom, we lost the power. Opening of Lightroom, the program advises it is unable to find the conscientious cache and must stop. I tried to recover by reinstalling, but I get the same message. Should I remove and try to reinstall?

  Delete the cache of your preview. It is a folder whose name ends with Previews.LRDATA (but not Smart Previews.LRDATA). Delete this folder. Do not remove anything else.

• Sudden closure of power during the uninstallation of Photoshop elements 11

  Hey all! I was just on the trial of the 11 Photoshop and then I uninstalled it. White it was uninstalling, my PC power to close, I want to say that electricity has exploded. It was like half uninstalled when the PC has lost power. The desktop icons and the start menu icons is gone. I manually deleted the entire folder "Adobe Photoshop Elements 11". I guess there are a lot of things to uninstall again, isn't it? The entries to registry and stuff. So please tell me how to do it.

  Thank you

  Amal

  Hello

  Operating system that you are running on?

  If Windows, the following should help.

  Manually remove Photoshop elements 11 | Windows

  Good luck

  Brian

• Virtual machines off the power during the response of isolation of riding

  We have 2 ESx 3.5 update 3 groups in our environment. Clusters have HA and response of isolation The Drs is configured from virtual machines under tension. During a network outage, on one of the hosts, all virtual machines were turned off. None of the virtual machines on other host turned off. Virtual machines had come back on the other cluster hosts once the network was up and VC was reachable.

  Prior to the maintenance of the network, due to a problem, this particular host was disconnected from the VC earlier. We were unable to connect to the server through the VI Client and restarted the service pass. Prior to the maintenance of the network, we identified that this single host was not related to performance on the VC Server data. Also some jobs started on the host would go to 100% but show never completed.

  My request is could the problem above caused virtual machines to restart despite the response of insulation parameter. Before the interview, I could find this host receiving the heart beats of VC server and other hosts in the cluster and VC showed no error associated with HA on the cluster or the particular host.

  We rebooted the host after the maintenance of the network and reconfigured HA on the cluster. Since then, it works fine. We had another interview to the network and we have had no problem with VM restarts.

  Looks like your ha agent may be dead as well as your connection between the host and VC.  There are several newspapers linked to HA, under/var/log/vmware/aam.  You can check to see if they provide additional insight as to why HA acted differently on a vs host others.

  -KjB

  VMware vExpert

  Don't forget to leave some points for messages useful/correct.