Drop PIN for mapView
I have this mapview
my function
function businessdetail(response){ console.log("Response: "+response) var json = JSON.parse(response) map.longitude = json.longitude map.latitude = json.latitude }
and that's my mapview
MapView { id: map preferredWidth: Infinity preferredHeight: 600 altitude: 1000 }
I just want to have a PIN which exactly it fell from my latitude longtitude
and if I click the mapview will be a road marker that leave from my site, like this
a better way to do this?
and please share some codes
Thank you
Thanks for the reply
because "I JUST NEED a MARKER IN THE CENTER OF MY map"
I do this
Container{ topPadding : 15 layout: DockLayout { } MapView { id: map preferredWidth: Infinity preferredHeight: 600 altitude: 1500 overlapTouchPolicy: OverlapTouchPolicy.Deny touchPropagationMode: TouchPropagationMode.None } ImageView { imageSource: "asset:///images/mapicon.png" verticalAlignment: VerticalAlignment.Center horizontalAlignment: HorizontalAlignment.Center preferredHeight: 100 preferredWidth: 100 onTouch:{ tabPane.direction = true tabPane.button = true } } }
hehe...
peace
Tags: BlackBerry Developers
Similar Questions
-
I downloaded El Capitan and can't drag and drop Photos for pictures of Mac to my ' 09 Pages documents as I did before with iPhoto. Is there a solution?
Hi gr.
Drag / drop photos to Pages ' 09 seems to be broken. Copy-paste works.
Select the photo in the Photos. Edition > copy
Click in the page document. Edition > paste
Faster:
Click on the photo
Command + C
Click on the pages
Command + V
Kind regards
Barry
PS: The time to update your profile information.
El Cap is running on the iBook G4? Problems outside of it?
-
I have a HP 2000-299WM. I want to improve my ram. There are 204 pins and 240 pins for the type I need. What would be correct.
Thank you
Hi, Garog
The right is 204 pins SODIMM
-
I have disabled my iPhone s4 because I type in my password PIN for several times how I unlock now?
Follow the instructions in this article to support that best apply to your situation:
Good luck
GB
-
I forgot my PIN for my iPhone and cannot use recovery mode because my sleep button is blocked. A certain predicamnet ik
Only thing you can do is to let die and then hold the home button when you plug it into your computer to put it in recovery mode.
Actually if the phone is on and that you have an icloud account, you can delete it at distance of icloud.com
Go to find my iphone and erase the phone.
-
Dimensions of 160 cable pins for the NI PXI-2530 b
Hello
My mechanical design team wants to know the measures of the 160 cable pins for the NI PXI-2530 b. It will take a while before we get the cable we ordered. I couldn't find a data sheet with details of the measure; are they? Alternatively, y Figure 1 in the Installation Instructions to scale? : http://www.ni.com/pdf/manuals/375656b.pdf
Thank you!
Hi JKSH,
I'm sure you've probably noticed, that the specific documentation is not accessible to the public. Please create a demand for service by clicking here and using the tools on the right side of the screen. Once you have created a service request, we continue to assess your situation and we hope to get you the documentation you need. Although parts of it may be, I'm not quite sure that figure in the manual that you have accessed is perfectly to scale. So, contact National Instruments more directly can be a better option for you.
-
HP Officejet 5745: PIN for googledrive printable HP
You want to enable Google Drive on my printable RESUME. The option appears in the menu and I can link my google reader successfully o my printer account. However, I've been unsuccessful with establishment number four POLES, such as recommended. I got to the point where it asks you to enter the PIN at four figures, but once I get there is no button or icon that allows me to save the figure four PIN as I entered... I can still access my google of the printer disk, but I want the oif added securuty entering pine four figures and also the convernience of him instrad of having to open a session and enter a new special access code everytime I want to use the print function of the reader google directly from the computer.
Hi @mamahen
Welcome to the Forums of HP's Support. I understand that you have a creation problem a PIN for the application of google reader.
I tried this on my 8620 and had no problem because there was a "confirm". So I tried in on a 5740 that my boyfriend has. And I discovered the same thing you did. No icon/button confirmation when you try to add a PIN. I also tested a 4630 (same type of display) and ended up in the same situation.
Please contact our Cloud Services at 855-785-2777. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
-
Using the same PIN for input and output
Hello
I would use a single PIN for input and output.
I'm experimenting with writing a driver for the DHT11 that using a single interface
I have the following code to open the PIN, but it fails
GPIOPin dhtPin = (GPIOPin) DeviceManager.open (new GPIOPinConfig (0, 17, GPIOPinConfig.DIR_BOTH_INIT_INPUT, GPIOPinConfig.DEFAULT, GPIOPinConfig.TRIGGER_NONE, false));
VM - iso [DAAPI] =-1: not supported direction was placed for 17 GPIO pin number. Open failed
jdk.dio.InvalidDeviceConfigException
-com/oracle/deviceaccess/gpio/impl/GPIOPinImpl.openPinByConfig0 (), bci = 0
com/oracle/deviceaccess/gpio/impl/GPIOPinImpl. < init > (), bci = 87
-com/oracle/deviceaccess/gpio/impl/GPIOPinFactory.create (), bci = 6
-com/oracle/deviceaccess/gpio/impl/GPIOPinFactory.create (), bci = 3
-jdk/dio/DeviceManager.openWithConfig (), bci = 49
-jdk/dio/DeviceManager.open (), bci = 6
-jdk/dio/DeviceManager.open (), bci = 2
-dht11 / DHT11. < init > (DHT11.java:42)
-dht11 / DHT11. < init > (DHT11.java:37)
-dht11/DHT11Midlet.startApp(DHT11Midlet.java:25)
-javax/microedition/midlet/MIDletTunnelImpl.callStartApp (), bci = 1
-com/sun/midp/midlet/MIDletPeer.startApp (), bci = 5
-com/sun/midp/midlet/MIDletStateHandler.startSuite (), bci = 264
-com/sun/midp/main/AbstractMIDletSuiteLoader.startSuite (), bci = 38
-com/sun/midp/main/CldcMIDletSuiteLoader.startSuite (), bci = 5
-com/sun/midp/main/AbstractMIDletSuiteLoader.runMIDletSuite (), bci = 132
-com/sun/midp/main/AppIsolateMIDletSuiteLoader.main (), bci = 26
I have the following permissions value
jdk.dio.gpio.GPIOPinPermission "*: *" 'open, setdirection '.
jdk.dio.DeviceMgmtPermission "*: *" 'open '.
I tried a few other pins too, I don't know if some ankles are entered or only output pins.
Any help would be appreciated. I could not find documents explaining how to configure more than one action for a permission ( 'open, setdirection'), so I tried just until he stopped to complain about the values...
What I need is to open a PIN, set it OUT, write a few high and low values... set it to the direction of the ENTRANCE, and reading back high and low values... But right now my GPIOPinConfig seems to be problematic
(... Configuration of the meaning to DIR_INPUT_ONLY or DIR_OUTPUT_ONLY, works until I try to change the direction of the port - what is expected...)
Hi Charl-
As far as I KNOW, he is there no current plan to apply 1 thread in Java ME Embedded.
I also looked at Pi4Jand they do not also support 1-wire, however, there is an enhancement request to add support for the bit hit Linux driver will have to perform 1-wire work.
The raspberry pi support it, it's just Java ME holds back me.
BTW - the article has been referenced in the enhancement request notes that he is not taken in native support for 1 wire on the Raspberry Pi - it requires a Linux kernel driver module.
Tom
-
Adjustment brush without leaving a PIN for each new setting
I use Lr6/CC 2015. It was working fine but now won't let a PIN for each new setting. I think the software is corrupted.
Can I just uninstall and then reinstall. Uninstall removes my catalogue or whatever it is another important? Is it safe to do?
Press H
-
Is there a cable that has a configuration of PIN for the printer and a USB for PC connector?
I recently bought a HP Pavilion p6620f desktop PC to replace my HP Media Center PC m1270n desktop computer, which has stopped working. I have a HP OfficeJet K60xi all in one printer fax scanner copier that has been the cable connected to the old PC. The end of the cable does not match any of the places to go on the new PC. Can you please tell me how to connect the printer to the new PC? Is there a cable that has a configuration of PIN for the printer and a USB for PC connector?
Please see: installation of the product with the USB cable and using the driver from Windows Update or the driver located in the Windows 7 operating system and HP USB 2.0 cable to the printer.
-
I used to get a menu drop-down asking if I want to that they remember my password, this menu no longer appears. When I go to the Security page I can't choose the backup password or the option of exceptions. Any help would be appreciated. Thank you
Hello
You should make sure that you run not Firefox in private browsing mode permanent that it does not raise 'Save password' command prompt.
https://support.Mozilla.org/KB/private+browsingFollow the steps below to make sure Firefox is not running on the private browsing:
Tools > Options > privacy > Firefox will be: "use the custom settings for history".
Uncheck the box: "always use the private browsing mode.I hope this helps!
-
How do you remove drop guests for user id fields?
When you fill in the user id field thinking I had tabulated field password but had not typed the password in the user id field after my user id. It seems now every connection for all to see!
See also http://kb.mozillazine.org/Deleting_autocomplete_entries
You can select an entry from the drop-down list and press SHIFT + DELETE to delete this entry.
-
I see this question several times, but he has not answered the question for me. I've updated my laptop to Windows 10 and don't like it, so I have restored the laptop for Windows 8. When I retored the laptop, he apparently lost the PIN code for the router and connect is no longer. When I try to connect to my network request the PIN code. This version of the router doesn't have the number of PINS on it. I have other devices connected without problem. I am not as computer like any other and must walk through the process. Can someone help me please?
Great to hear
You are welcome
-
Where can I find list of pins for connectors 68 pins on the SMU-8430/8 and the SMU-8431/8
We need to build new cables for the SMU-8430/8 and 8431/8 interface cards series.
I can't find pinout information or other connectors 68-pin on the front of these cards.
Can someone point me in the right direction to find this information. Thank you.
The design of the system requires new cables we don't need a list of the pins.
After a few more watching on the web site of NOR, I found the information I need here:
http://digital.NI.com/manuals.nsf/WebSearch/F5A76AD1B0C3B1FE86257B59006A9EAD
Thanks for the reply.
-
How to connect to the list of the pins for a redeclenchables pulse train
Hello
I'm relatively new toDAQmx, especially for the counters. I have problems to determine what pins to plug on the DAQ card. I would like to run the vi described here, but am not sure how to connect the card. I looked at the manual of the X series for the pinout descriptions, but I don't know how they apply to the program on this page. When I connect DOOR a meter, THE, A, B pins, etc.?
Any input on what to connect or pages that may make how to connect the counters would be very useful.
Thank you.
Your most recent post of links to an example more advanced sounding & I recommend that stick you with something simple to start.
Your first post links to such an an example where the signal of pulse train going out of Ctr0_Out. Ctr1 is used to make the trigger and the 'break' (enable / disable) Ctr0. However, much of this stuff is configured using some features of DAQmx such that you don't need to physically connect the pins between the two counters.
Only physical wiring that you need is to plug your physical digital trigger to the PFI1 signal and connect Ctr0_Out to some external thing must receive them. As long as your device is called "Dev1", I think this example to work.
I know there are some docs useful for more general info on the pins meter & behavior, but I don't remember quite so that I have not watched for them for many years. Meanwhile, here is a * little * bit General description I wrote myself once.
-Kevin P
Maybe you are looking for
-
Content of mail to sync between two computers
Is it possible to synchronize the content of mail between two computers [iPhone, if possible]? Computers currently send and receive the same two e-mail accounts [not an account of @iCloud.com]. But if I receive an email, reply or remove it on a singl
-
How do I update the BIOS on the Tecra R940?
Are there instructions for BIOS update for my Tecra R940/Win7Pro/64 bit?Thank youAB - Oz
-
Like many others, my ethernet is not connected today so am using wifi-there seems to be many "bugs" in the community and on the line that is the right one. As well as since I use a wi - fi connection, some programs that I downloaded from the apple st
-
Satellite 2250XCDS does not recognize compressed serial port
I have a 12 x 12 connected to the serial port (COM1) Tablet and it does not detect or recognize this tablet. The Tablet is plugged. The Tablet light is on. The light changes from red to green when I run the stylus above isn't the tablet that is at is
-
Need to update firmware for drive HDDVD of Satellite P200
I bought my P200 - 17 c, 3 months ago. I tried to update my Firmware apparent more later (TO35).However I can't because I don't have any other installed TO33/TO34. After checking my FW version is TO04! ???? How can I get previous versions so I can up