How to connect to the list of the pins for a redeclenchables pulse train
Hello
I'm relatively new toDAQmx, especially for the counters. I have problems to determine what pins to plug on the DAQ card. I would like to run the vi described here, but am not sure how to connect the card. I looked at the manual of the X series for the pinout descriptions, but I don't know how they apply to the program on this page. When I connect DOOR a meter, THE, A, B pins, etc.?
Any input on what to connect or pages that may make how to connect the counters would be very useful.
Thank you.
Your most recent post of links to an example more advanced sounding & I recommend that stick you with something simple to start.
Your first post links to such an an example where the signal of pulse train going out of Ctr0_Out. Ctr1 is used to make the trigger and the 'break' (enable / disable) Ctr0. However, much of this stuff is configured using some features of DAQmx such that you don't need to physically connect the pins between the two counters.
Only physical wiring that you need is to plug your physical digital trigger to the PFI1 signal and connect Ctr0_Out to some external thing must receive them. As long as your device is called "Dev1", I think this example to work.
I know there are some docs useful for more general info on the pins meter & behavior, but I don't remember quite so that I have not watched for them for many years. Meanwhile, here is a * little * bit General description I wrote myself once.
-Kevin P
Tags: NI Hardware
Similar Questions
-
How to connect to the database for all reports EN
Hello
I've developed 100 reports in the client of the production, test purpose that I moved
test client. How can I connect to the database for all reports at once?
Concerning
ThaerHi Thaer,
You can connect to the connection of database for all reports through the workspace of HFM.
Connect to the HFM area--> click--> Explorer, and click Tools--> click Manager of database and respective connections of Production Instance to the Instance of Test required information and that you will be able to connect to the Test database for all reports both change.
Kind regards
Srikanth -
How to connect to the server from VPN Windows Sever?
Hey guys, I recently created my own VPN server to connect to my home network using Windows Server 2003. I know I probably still need to do this if I don't know what I have to do, but how to connect to the server, or at least set it up in order to be logged in? I think I got the computers communicating with each other, but I think that I am running into errors of authentication. Could someone point me in the right direction with regard to what I have to do what I already have Setup? Thanks in advance.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Need to know how to connect to the internet, anywhere
Original title: internet connection on laptop
10 years ago, I got a laptop and was able to connect to the internet anywhere I went. I don't remember how I was able to do it without a motem
Hi Susan,.
Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.
Want to know how to connect to the internet wherever you go.
You can use USB dongles to connect to the Internet via a wireless connection.
We need more information to help you better:
What version of OS are you using?
You can use your favorite search engine to search for USB dongles.
Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
You can also contact an Internet service provider for assistance.
I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.
-
How to connect to the database
Hi all
I use labsql (and quite new to him m) and the server Mysql 5.1.I wanted to know how to connect to the database without changing the name of the dsn from the tools administrative/ODBC 5.1 driver manually. I want to install exe in several PC and it would be a great help if I could make the connection directly but my Vi.
I went through several forums and came to know that 'Provider = ProviderName; Data Source = DatabaseSource; Initial Catalog = DatabaseName; User = username ID; Password = password', should solve the problem. But where in my case I m still confused. The connection string above does not sit well with me.
Can someone help me please.
Have a look here, where I have such a picture to show how to form a string constant to connect to the database. Some subsequent posts in this thread should also be useful.
Good luck!
Ian
-
using the KDL-46W700 how to connect to the wireless keyboard and wireless mouse
Hello
I use KDL-46W700 how to connect to the wireless keyboard and wireless mouse
Unfortunately, you can not connect a keyboard wirelessly on your TV. Your TV will need a driver for this. Sad thing, it's impossible to install anything on the tv, which includes the driver for the external devices such as a wireless (except USB) keyboard... I recommend the SIDEVIEW TV application that has the remote control / function keyboard and mouse... this app is free and can be downloaded via Google Playstore... ^^.
-
How to connect to the PC?
I have problems connecting my crush to my computer. At first I thought it was the SD card, I bought at the store of the cell - I went and bought a new one, that does not work. I put both cards and reading the manual. However, when I insert my USB in my computer, I get a note saying: "the disk in drive E is not formatted. Format it now? "When I click on Yes - It then proceds to tell me to drive cannot be formatted. Now when I try to find my memory card - its completely gone! Help!
chanondesirae
Repeat the process of formatting your phone memory overwrite... Make sure that it is not connected to the USB cable
See Crush online manual p. 48:... Crush
Tap Settings on the main screen you...
Setting > memory > memory card > format card
- Don't forget... so that the phone crush is connected to your computer via. USB, most of the functions of the phone do not work.
- Phone crush also card does not appear in 'Settings' until the USB of the PC cable is disconnected
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Have you set the USB Mode mass storage on your Crush in definition... see pages 45 & 46 also in the manual to learn How to connect to the computer
Post edited by: Poko... to include mass storage Mode information
-
How to connect to the server ESXI vSphere Client side WAN?
How to connect to the server ESXI vSphere Client side WAN?
through firewall
I tried to open the ports 902 903, 443... and so on...
and I tried several sites to find the solution but...
nothing works...
connectivity works on local network
Help, please...
Source Destination Port
ESXI 443/TCP client
ESXi 902/TCP client
ESXi 902/TCP Client
ESXi 902/UDP Client
ESXi 903/TCP client
Edit: Also check if the firewall ESXi all IP addresses are allowed to connect:
Example:
See attachment...
-
My computer is not connected to the internet for more than 2 minutes both
my computer is not connected to the internet more than 2 minutes at a time
Hi Ronda,
Thanks for choosing the Microsoft Community forums.
I see that the computer is not connected to the internet for more than 2 minutes on Windows 7.
To help you better, please answer this question.
Did you do changes on the computer before the show?
I suggest you follow the provided methods to solve the problem.
Method 1:
Please see the knowledge base article:
How to troubleshoot network connectivity problems in Internet Explorerhttp://support.Microsoft.com/kb/936211/
Method 2:
You can make sure to uncheck the following option in the network adapter properties in Device Manager.
"Allow the computer to turn off this device to save power".
You can see the steps
a. Click Start, the Device Manager in the area start search, type and then click on Device Manager in the list programs.
b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
c. in the Device Manager dialog box, expand network adapter, click the network adapter and then click Properties.
d. in the network adapter properties dialog box, click the power management tab. The allow the computer to turn off this device to save uncheck box appearsMethod 3: Problems of Wi - Fi network and
If you need help with the Windows operating system, just tell me and we will be happy to help you.
-
How to turn off the microphone for sony hdr-pj260v
How to turn off the microphone for sony hdr-pj260v
Hi dstrakal,
Option to disable the built-in microphone is not available in the camcorder. However, the camcorder has an input jack to connect an external microphone, there are two possible solutions for this:
- Connect a microphone with a switch ON / OFF the microphone on the camcorder decision-making. Then, set the switch to the external microphone to the OFF position. This will disable the microphone on the camcorder.
- Connect a dummy stereo mini plug to the microphone on the camcorder Jack.
If my post answered your question, please mark it as "acceptable Solution".
-
How can I get the opening for an enlarged screen screen
Original title: opening screen
How can I get the opening for an enlarged screen screen
If you are talking about an Internet Explorer page, three options.
1: take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and the latter. Windows will remember the size of the last closed window the next time that you open the program.
2: any shortcut you use to launch the window, right-click, and select Properties. Under the 'Run' drop-down list, choose "expanded".
-
How to manually change the ports for HTTP on the server vCenter Server
Hello Experts,
We have Windows Server 2008 SP2 machine where we v5.1 installed with other SSO components, inventory services, vCenter Server and Update Manager.
So we went from SSO, the inventory services and vCenter Server fine however, vCenter Server has stopped working. While we were to modernize SSO, the service could not start after the upgrade and the recd suite error "Service VMware KDC service could start.". So, we found the article on the VMware site that said port 88 to cause the problem. To find out more by using the netstat command, we found vpxd.exe used port 88. That is why, we stopped this service and proceeded to the upgrade of the SSO. The upgrade is complete following the inventory service and vCenter Server. While we were upgrading vCenter Server, we found that port 88 was used for HTTP communication.
So we wasted on the use of the port. The upgrade has been completed successfully, however, we can not connect to vCenter server using vSphere Client version 5.1 or 5.5. We even tried to start the VMware VirtualCenter server using the services.msc console and it failed.
So we assume the port changes happened during upgrade of the SSO meets the HTTP port by vCenter server usage. We need help on how to manually change the ports for HTTP on the vCenter server.
Suggestions forward. This problem is with the production servers.
Thank you
Karan
This has been resolved... port has been changed manually and works very well.
-
How can I save the iphoto for flash player library
How can I save the iphoto for flash player library
Where is the flash player? It is external, or what?
Barry
-
where can I get advice on how to set up the iPad for a partially sighted person
Where can I get advice on how to set up the iPad for a partially sighted person. Are there apps that can help the user, perhaps activated by voice?
Paul,
Go to http://help.apple.com/ipad/9/#/iPad9a2465f9and see all the topics under accessibility.
-
I bought the live app pga golf, but it doesn't work in my country! How can I cancel the payment for the next month?
There are instructions on this page to manage and stop automatic renewal of subscriptions: view, change or cancel your subscription - Apple Support
Maybe you are looking for
-
What exactly does the Time Machine backup?
What exactly does the Time Machine backup? We have a Mac Pro towers (NOT for sale) and Mac mini with several hard drives installed internally. Time Machine backup all internal disks or just the boot disk? This can be configured?
-
do not know what Search words to get a response... If you can provide THE answer please do. (to avoid the multiple steps) It should be simple... How to change Firefox page opens. is my old email account, that doesn't exist longer... you want to chang
-
All of a sudden my computer at home watch I now EMEF and Devexpress systems added to my system - I do not know what they are or they came from they appeared today
-
Impossible to install media player 11
* - Original title - Media Player My old media player would not burn a cd, so I tried the update now option, he installed media player 11 but it did have my library in it, I did a system restore to see if I could return to my former player but now I
-
Impossible to find more information on KB3177723 and KB3179573 on the MS Support Website updates
Two updates (an option and important) say they need to be installed in my Windows 7 computer. But when I click on 'more information' in the Update window, I am taken to a Web page on the MS support site that says: no information is available. In ad