drop table homologous counterpart has no error
PIX Version 7.2 (2)
!
hostname pix
!
interface Ethernet0
nameif outside
security-level 0
IP address publicip 255.255.255.224
!
interface Ethernet1
nameif inside
security-level 100
192.168.5.1 IP address 255.255.255.0
!
XXXXXXXXXX encrypted passwd
passive FTP mode
DNS domain-lookup outside
DNS lookup field inside
DNS server-group DefaultDNS
permit same-security-traffic intra-interface
object-group service dns tcp - udp
Description primary-dns
access list allow extended permit ip any one
list of access allowed extended vpn ip xxx.98.0.0 255.255.0.0 192.168.12.0 255.255.255.0
list of access allowed extended vpn ip xxx.98.0.0 255.255.0.0 10.100.10.0 255.255.255.0
vpn-ieee 192.168.12.0 ip extended access list allow 255.255.255.0 xxx.98.0.0 255.255.0.0
vpn-ieee 10.100.10.0 ip extended access list allow 255.255.255.0 xxx.98.0.0 255.255.0.0
access list extended ip 10.100.10.0 digitalclients allow 255.255.255.0 xxx.98.0.0 255.255.0.0
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP local pool digitallibpool 10.100.10.0 - 10.100.10.254
ICMP unreachable rate-limit 1 burst-size 1
ASDM image Flash: / asdm - 603.bin
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (outside) 0-list of access vpn
NAT (outside) 1 vpn-ieee access list
NAT (inside) 1 192.168.5.0 255.255.255.0
Access-group allow the interface inside
Route outside 0.0.0.0 0.0.0.0 121.52.147.65 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
internal digitallib group policy
attributes of the strategy of group digitallib
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list digitalclients
uetpix fbrWs9tE8wap9fQF encrypted password username
Enable http server
http 192.168.5.2 255.255.255.255 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp series router-esp-sha-hmac
Crypto ipsec transform-set esp - esp-sha-hmac digitallibset
transform-set set of crypto dynamic-map cisco router-set 1
Crypto dynamic-map cisco 1 the value reverse-road
Dynamic crypto map REMOTEMAP 100 set transform-set digitallibset
dynamic dyn-map 10-isakmp ipsec crypto map Cisco
card crypto STATICLIB 100-isakmp dynamic ipsec REMOTEMAP
STATICLIB interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Crypto isakmp nat-traversal 20
IPSec-attributes tunnel-group DefaultL2LGroup
pre-shared-key *.
ISAKMP keepalive retry threshold 30 10
tunnel-group digitallib type ipsec-ra
tunnel-group digitallib General-attributes
address digitallibpool pool
Group Policy - by default-digitallib
digitallib group of tunnel ipsec-attributes
pre-shared-key *.
Telnet 192.168.5.0 255.255.255.0 inside
Telnet timeout 20
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 20
SSH version 1
Console timeout 10
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the http
inspect the they
type of policy-card inspect dns migrated_dns_map_1
parameters
message-length maximum 512
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:8c5cd31c762c24c7577127e8d6ce19fd
: end
PIX (config) # 14 Jan 13:21:34 [IKEv1]: Group = digitallib, IP = 182.185.41.238, Removing peer to peer table does not, no match!
Jan 14 13:21:34 [IKEv1]: Group = digitallib, IP = 182.185.41.238, error: cannot delete PeerTblEntry
Jan 14 13:21:39 [IKEv1]: Group = digitallib, IP = 182.185.41.238, Removing peer to peer table does not, no match!
Jan 14 13:21:39 [IKEv1]: Group = digitallib, IP = 182.185.41.238, error: cannot delete PeerTblEntry
Jan 14 13:21:44 [IKEv1]: Group = digitallib, IP = 182.185.41.238, Removing peer to peer table does not, no match!
Jan 14 13:21:44 [IKEv1]: Group = digitallib, IP = 182.185.41.238, error: cannot delete PeerTblEntry
Jan 14 13:21:49 [IKEv1]: Group = digitallib, IP = 182.185.41.238, Removing peer to peer table does not, no match!
Jan 14 13:21:49 [IKEv1]: Group = digitallib, IP = 182.185.41.238, error: cannot delete PeerTblEntry
My vpn site-to-site with dynamic ip router works and now I configure pix to vpn easy, when I tried customer, its gives me the following error. where is the problem? Please help me
See my response to another thread that has a similar problem with yours.
https://supportforums.Cisco.com/thread/2191603
Tags: Cisco Security
Similar Questions
-
Hi all
My version of DB is Oracle Database 10 g Enterprise Edition Release 10.2.0.4.0 - 64bi on solaris 10 OS.
I am trying to remove a table, but throw the follwing error.
DROP TABLE UC_ARCHIVAL_STATIC_TABLE;
ORA-00604: an error has occurred at the SQL level 1 recursive
ORA-01008: not all variables
ORA-06512: at line 21
Why is happening.
Thanks in advance
JazzVijay S P G wrote:
What are these triggers...
Pure evil. I'm kidding (sort of), at least one of the STRAW that's broken. anyway and you drop the table prevents. You could limit STATUS = 'ENABLED' and TRIGGERING_EVENT = 'DROP' and limit in this way.
-
Drop table for a user, where the table has special characters.
I have to delete tables starting with BIN. How can I do? This is Oracle database 11g.
SQL > select * from tab;
TNOM TABTYPE CLUSTERID
------------------------------ ------- ----------
BIN$ 7J51dMFbQ36/jjLPLdzXeg == $0 TABLE
BIN$ CaCh7QhdRDqlyJo9JETBaA == $0 TABLE
BIN$ J + 4ibk96QZ + PZCDGGNx8Tw == $0 TABLE
BIN$ NvnXFcd4QBW4uYMqOu8H6A == $0 TABLE
BIN$ RaCaPOaTSXyKDlZZG2ua7Q == $0 TABLE
BIN$ aGKXrnwlQRe + e0IH6tEBPQ == $0 TABLE
BIN$ fA5I + 2xsQy66mF7koOoYkA == $0 TABLE
BIN$ lLxLZF3BQ0eum9Ia4rtqYA == $0 TABLE
BIN$ nKZ5hquHRRWHa9daNsa5XQ == $0 TABLE
BONUS BOARD
DEPT TABLE
TNOM TABTYPE CLUSTERID
------------------------------ ------- ----------
EMP TABLE
SALGRADE TABLE
13 selected lines.
I tried to drop one of them and it gave an error saying that table_name is a special character;
SQL > drop table BIN$ nKZ5hquHRRWHa9daNsa5XQ == $0;
drop table BIN$ nKZ5hquHRRWHa9daNsa5XQ == $0
*
ERROR on line 1:
ORA-00933: SQL not correctly completed command.
Please suggest. Thanks in advance.10 g recyclebin default is on, and whenever there is drop table statement it goes to recyclebin. To avoid this fall of the table must be with the keyword to purge as,.
SQL > drop table t is serving;
Otherwise, you can change db setting to turn off recyclebin and the object will not go to recyclebin after that. See http://www.orafaq.com/forum/t/72161/2/Kind regards
Julien -
Hello
How does this work?
Session 1: Session 2:
SQL > create table t (x number);
Table created.
SQL > insert into t values (1);
1 line of creation.
SQL > insert into t values (2);
1 line of creation.
SQL > commit;
Validation complete.
SQL > start
2 for f in (select * from t) loop
3 dbms_output.put_line(sysdate||) e '|| f.x);
4 dbms_lock.sleep (60);
5 end of loop;
6 end;
7.
SQL > drop table t;
Deleted table.
SQL > select sysdate to double;
13:58:45
13:58:34 1
13:59:34 2
The table has been deleted, but the line is always returned once the table is deleted. With the help of OPEN and FETCH has the same
declare
cursor c is select * from t;
r t % rowtype;
Start
Open c;
extract the c in r;
dbms_output.put_line(sysdate||) e '|| r.x);
DBMS_LOCK. Sleep (60);
extract the c in r;
dbms_output.put_line(sysdate||) e '|| r.x);
end;
/Is this a bug? I could even reproduce it with 1 million rows. Shouldn't this ORA-01001 invalid cursor return?
Start
for f in (select * from t) loop
If f.x in (1,10,100,1000,10000,100000,1000000) thendbms_output.put_line(sysdate||) e '|| f.x);
DBMS_LOCK. Sleep (5);
end if;
end loop;
end;
/Thank you
Laurent
PS: It boils down to having no consistency to the DICTIONARY level... which is ugly
Huh? The dictionary makes perfect sense.
Any query cursor / who uses the data dictionary will get the correct results.
If the cursor that you use should the data dictionary, it will get the correct results - he'll notice the table disappeared and will throw an exception.
Your 'problem' manifests only for a SELECT query. Change the cursor in UPDATES and you can't delete the table.
SQL > drop table t;
drop table t
*
ERROR on line 1:
ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired
Even if you remove a line in this loop.
https://docs.Oracle.com/CD/B28359_01/server.111/b28318/consist.htm#i8841
As a request enters the implementation phase, change current system (SNA) number is determined. Figure 13-1, this system change number is 10023. As data blocks are read in the name of the query, only the blocks that are written with the observed SNA are used.
When the cursor is opened that the SNA is determined, the data file header is read and Oracle knows where the first measure.
The cursor can read this measure without the need of the data dictionary. So if you drop the table in another session your cursor can continue to read this measure.
It is ONLY when the next measurement is necessary that Oracle uses the dictionary of data and notice that the table has been deleted.
https://docs.Oracle.com/CD/B28359_01/server.111/b28318/logical.htm
A scope is a number of blocks of contiguous data allocated for storing a specific type of information.
The cursor can keep accessing the measure, and all these "contiguous data blocks" because he knows where the measurement begins and how many blocks there.
So if 'million' lines fits into this extent (s) the query will keep trucking.
It may take even more to see the missing table if a path to the index is used as the index blocks are pointers to the previous index block. These pointers can span extensions - you can read an entire table once it has been abandoned if the cursor is using the index to find all data or all the blocks table as long as the extensions/blocks being read have not been replaced or reallocated.
It is therefore a problem for SOME ONLY.
-
Execute Immediate - Drop table
Hello
I have a piece of code that accepts name of table as a parameter entry and the fall of the table using dynamic SQL. The code follows below:
create or replace procedure drop_table (in_table_name in varchar2)
as
sql_stmt varchar2 (25);
Start
dbms_output.put_line (' name of the Table that had to be abandoned is: ' | in_table_name);
sql_stmt: = 'drop table ' | in_table_name;
execute_immediate sql_stmt;
end;
/
When I'm trying to compile this procedure, I get compilation errors.
We can use execute immediate to remove the tables inside PL/SQL code.
Kindly help.
Thanks in advance
RambeauYou get an error because of the "_" between run and immediate.
Try:
create or replace procedure drop_table(in_table_name in varchar2) as sql_stmt varchar2(25); begin dbms_output.put_line('Table name that has to be dropped is: '|| in_table_name); sql_stmt := 'drop table ' || in_table_name; execute immediate sql_stmt; end; /
-
Hello
I currently am tring to remove a table by using a device to process by clicking on the button
Icreated my button and also a 'process of PL/SQL' and I put
----
DROP TABLE & P0_TABLE_NAME. THE CASCADE CONSTRAINTS;
----
inside the 'source' field with by checking the box "do not validate code PL/SQL (PL/SQL code when executing only analysis).»
But when the button is clicked I got the following error
----
ORA-06550: line 1, column 7: PLS-00103: met the 'DROP' symbol during the waited as follows: begin case declare exit for goto rise back loop mod null pragma select update while < ID > < a between double quote delimited identifiers of > < a variable binding > < < current delete fetch locking insert open nearby rollback savepoint SQLExecute fusion pipe set commit forall
Error drop table error
Ok
----
Anyone has an idea about this?
Debug trace is
----
A C C E P t: ask = "purge."
0.00: metadata: go look up the definition and application shortcuts
0.00: alter session set nls_language = "AMERICAN."
0.00: alter session set nls_territory = 'AMERICA '.
0.00:... "NLS: decimal separator Set =". »
0.00:... NLS: Set NLS Group separator = ",".
0.00:... NLS: Date Format Set = "DD-MON-RR.
0.00:... Setting session time_zone at + 02:00
0.00: NLS: wwv_flow.g_flow_language_derived_from = 0: wwv_flow.g_browser_language = en - us
0.00: fetch database session state
0.01:... Check the owner of the 2289784661666743 session
0.01:... Check for expiration of the session:
0.01:... Metadata: Page Fetch, calculation, process and branch
0.01: session: extract information from session header
0.01:... Metadata: Retrieve the attributes of the page for application 121, page 2
0.01:... Validate page affinity point.
0.03:... Check off the items hidden_protected.
0.03:... Check authorization security systems
0.03: session state: Save elements of form and p_arg_values
0.03:... Session state: Save "P0_TABLE_NAME" - registration of same value: "STATPHI_595730051".
0.04:... Session state: Save "P2_TABLE_NAME" - registration of same value: "STATPHI_595730051".
0.04:... Session state: Save "P2_TYPE" - registration of same value: '2 '.
0.04:... Session state: Save "P2_CALENDAR" - registration of same value: "PA".
0.04:... Session state: Save "P2_FILE_NAME" - registration of same value:
0.04: point of treatment: ON_SUBMIT_BEFORE_COMPUTATION
0.04: branch point: BEFORE_COMPUTATION
0.04: point of calculation: AFTER_SUBMIT
0.04: tabs: make the connection for the tab queries
0.04: branch point: BEFORE_VALIDATION
0.04: perform validations:
0.04: branch point: BEFORE_PROCESSING
0.04: point of treatment: AFTER_SUBMIT
0.04: button "P2_PURGE_TABLE" process.
0.04:... Process 'DROP TABLE': PLSQL (AFTER_SUBMIT) DROP TABLE & P0_TABLE_NAME. THE CASCADE CONSTRAINTS;
0.06: unhandled exception encountered type process PLSQL
0.06: see the error page...
0.06: execute rollback...
----Hi user631592 ;-)
You can't directly use a DDL statement.
But you can use an EXECUTE IMMEDIATE in your process.THEN
BEGIN
RUN IMMEDIATELY "DROP TABLE STATPHI_595730051;
END;Concerning
-
How to remove the table by using the procedure, I get the error message:
Code
CREATE OR REPLACE PROCEDURE drop_table IS
BEGIN
drop table test;
end;
Hello
Shuumail wrote:
How to remove the table by using the procedure, I get the error message:
Code
CREATE OR REPLACE PROCEDURE drop_table IS
BEGIN
drop table test;
end;
DROP TABLE is not a PL/SQL command; It's only a SQL command.
To run a command SQL, PL/SQL, you can use dynamic SQL, like this:
CREATE OR REPLACE PROCEDURE drop_table IS
BEGIN
EXECUTE IMMEDIATE 'drop table test;
END;
Why do you do this? Using PL/SQL to create and drop objects, it is often the best 3rd or 4th way to meet certain requirements. If you can tell which is your requirement, so someone can help you find a good way to do it in Oracle.
-
Hello
could someone share advice on improving the execution time of the abandonment of the tables?
I have a blank table with more than 200 columns and it takes 23-25 s to drop. Smaller tables take something around 0.1 s of course. Problem is I have let fall from thousands of these tables and then re-create them. The recreate itself takes not more than one second.
What is the origin of more time? Is it because of an implicit validation in the drop table command?
I tried this with almost identical times noarchivelog mode. I also tried different settings and commit_logging optimizer_mode, none showed any usable results, but I'm still at the experimental stage. The goal is to minimize the execution time once I need to run the entire batch, perhaps in the course of running several sessions can work to be faster (while times are maybe longer), don't know yet.
Here is an example of output:
This is company Oracle 11.2.0.3 on 64-bit Windows.SQL> CREATE TABLE "SYSADM"."DRIVERTEST" 2 ( 3 "PROCESS_INSTANCE" NUMBER(10,0) NOT NULL ENABLE, 4 "INTFC_ID" NUMBER(*,0) NOT NULL ENABLE, 5 "INTFC_LINE_NUM" NUMBER(*,0) NOT NULL ENABLE, 6 "TRANS_TYPE_BI" VARCHAR2(4 CHAR) NOT NULL ENABLE, 7 "TRANS_TYPE_BI_SEQ" NUMBER(*,0) NOT NULL ENABLE, 8 "HDR_FIELDS_KEY" VARCHAR2(30 CHAR) NOT NULL ENABLE, 9 "HDR_FIELDS_BILL_BY" VARCHAR2(1 CHAR) NOT NULL ENABLE, 10 "ADJ_TRANS_TYPE" VARCHAR2(5 CHAR) NOT NULL ENABLE, 11 "CREATE_NEW_BILL" VARCHAR2(1 CHAR) NOT NULL ENABLE, 12 "TMP_BILL_FLG" VARCHAR2(1 CHAR) NOT NULL ENABLE, 13 "ENTRY_TYPE" VARCHAR2(5 CHAR) NOT NULL ENABLE, 14 "ENTRY_REASON" VARCHAR2(5 CHAR) NOT NULL ENABLE, 15 "ENTRY_EVENT" VARCHAR2(10 CHAR) NOT NULL ENABLE, 16 "LOAD_STATUS_BI" VARCHAR2(3 CHAR) NOT NULL ENABLE, 17 "ERROR_STATUS_BI" VARCHAR2(4 CHAR) NOT NULL ENABLE, 18 "BUSINESS_UNIT" VARCHAR2(5 CHAR) NOT NULL ENABLE, 19 "BUSINESS_UNIT_GL" VARCHAR2(5 CHAR) NOT NULL ENABLE, 20 "BILL_TO_CUST_ID" VARCHAR2(15 CHAR) NOT NULL ENABLE, 21 "ADDRESS_SEQ_NUM" NUMBER(*,0) NOT NULL ENABLE, 22 "BILL_TO_COPIES" NUMBER(*,0) NOT NULL ENABLE, 23 "CNTCT_SEQ_NUM" NUMBER(*,0) NOT NULL ENABLE, 24 "NAME1" VARCHAR2(40 CHAR) NOT NULL ENABLE, 25 "INTERUNIT_FLG" VARCHAR2(1 CHAR) NOT NULL ENABLE, 26 "BUSINESS_UNIT_TO" VARCHAR2(5 CHAR) NOT NULL ENABLE, 27 "DIRECT_INVOICING" VARCHAR2(1 CHAR) NOT NULL ENABLE, 28 "RANGE_SELECTION_ID" VARCHAR2(30 CHAR) NOT NULL ENABLE, 29 "BILL_SOURCE_ID" VARCHAR2(10 CHAR) NOT NULL ENABLE, 30 "BILL_TYPE_ID" VARCHAR2(3 CHAR) NOT NULL ENABLE, 31 "BILL_CYCLE_ID" VARCHAR2(10 CHAR) NOT NULL ENABLE, 32 "BILL_BY_ID" VARCHAR2(10 CHAR) NOT NULL ENABLE, 33 "PAYMENT_METHOD" VARCHAR2(3 CHAR) NOT NULL ENABLE, 34 "PYMNT_TERMS_CD" VARCHAR2(5 CHAR) NOT NULL ENABLE, 35 "BANK_CD" VARCHAR2(5 CHAR) NOT NULL ENABLE, 36 "BANK_ACCT_KEY" VARCHAR2(4 CHAR) NOT NULL ENABLE, 37 "BI_CURRENCY_CD" VARCHAR2(3 CHAR) NOT NULL ENABLE, 38 "BASE_CURRENCY" VARCHAR2(3 CHAR) NOT NULL ENABLE, 39 "CUR_RT_TYPE" VARCHAR2(5 CHAR) NOT NULL ENABLE, 40 "RATE_MULT" NUMBER(15,8) NOT NULL ENABLE, 41 "RATE_DIV" NUMBER(15,8) NOT NULL ENABLE, 42 "CUR_RT_SOURCE" VARCHAR2(1 CHAR) NOT NULL ENABLE, 43 "INVOICE_DT" DATE, 44 "ACCOUNTING_DT" DATE, 45 "ACCRUE_UNBILLED" VARCHAR2(1 CHAR) NOT NULL ENABLE, 46 "TARGET_INVOICE" VARCHAR2(22 CHAR) NOT NULL ENABLE, 47 "INVOICE" VARCHAR2(22 CHAR) NOT NULL ENABLE, 48 "DOC_TYPE" VARCHAR2(8 CHAR) NOT NULL ENABLE, 49 "CONSOL_SETID" VARCHAR2(5 CHAR) NOT NULL ENABLE, 50 "CONSOL_CUST_ID" VARCHAR2(15 CHAR) NOT NULL ENABLE, 51 "CONSOL_KEY" VARCHAR2(22 CHAR) NOT NULL ENABLE, 52 "INVOICE_TO_ADJ" VARCHAR2(22 CHAR) NOT NULL ENABLE, 53 "ADJ_DELTA_ACTION" VARCHAR2(3 CHAR) NOT NULL ENABLE, 54 "LINE_SEQ_TO_ADJ" NUMBER(*,0) NOT NULL ENABLE, 55 "LINE_SEQ_NUM" NUMBER(*,0) NOT NULL ENABLE, 56 "LINE_DST_SEQ_NUM" NUMBER(*,0) NOT NULL ENABLE, 57 "LINE_DFR_SEQ_NUM" NUMBER(*,0) NOT NULL ENABLE, 58 "LINE_UAR_SEQ_NUM" NUMBER(*,0) NOT NULL ENABLE, 59 "LAST_NOTE_SEQ_NUM" NUMBER(*,0) NOT NULL ENABLE, 60 "NOTES_SEQ_NUM" NUMBER(*,0) NOT NULL ENABLE, 61 "LINE_TYPE" VARCHAR2(4 CHAR) NOT NULL ENABLE, 62 "IDENTIFIER" VARCHAR2(18 CHAR) NOT NULL ENABLE, 63 "DESCR" VARCHAR2(30 CHAR) NOT NULL ENABLE, 64 "UNIT_OF_MEASURE" VARCHAR2(3 CHAR) NOT NULL ENABLE, 65 "QTY" NUMBER(15,4) NOT NULL ENABLE, 66 "ORIG_QTY" NUMBER(15,4) NOT NULL ENABLE, 67 "UNIT_AMT" NUMBER(15,4) NOT NULL ENABLE, 68 "LIST_PRICE" NUMBER(15,4) NOT NULL ENABLE, 69 "PPRC_PROMO_CD" VARCHAR2(20 CHAR) NOT NULL ENABLE, 70 "MERCH_TYPE" VARCHAR2(10 CHAR) NOT NULL ENABLE, 71 "TAX_CD" VARCHAR2(8 CHAR) NOT NULL ENABLE, 72 "TAX_EXEMPT_CERT" VARCHAR2(30 CHAR) NOT NULL ENABLE, 73 "TAX_EXEMPT_FLG" VARCHAR2(1 CHAR) NOT NULL ENABLE, 74 "TAX_EXEMPT_RC" VARCHAR2(2 CHAR) NOT NULL ENABLE, 75 "TAX_JOB_NUM" VARCHAR2(10 CHAR) NOT NULL ENABLE, 76 "BI_TAX_TIMING" VARCHAR2(1 CHAR) NOT NULL ENABLE, 77 "CUSTOMER_GROUP" VARCHAR2(10 CHAR) NOT NULL ENABLE, 78 "VAT_TXN_TYPE_CD" VARCHAR2(4 CHAR) NOT NULL ENABLE, 79 "TAX_CD_VAT" VARCHAR2(8 CHAR) NOT NULL ENABLE, 80 "VAT_APPLICABILITY" VARCHAR2(1 CHAR) NOT NULL ENABLE, 81 "VAT_PRODUCT_GROUP" VARCHAR2(10 CHAR) NOT NULL ENABLE, 82 "PROD_GRP_SETID" VARCHAR2(5 CHAR) NOT NULL ENABLE, 83 "IST_TXN_FLG" VARCHAR2(1 CHAR) NOT NULL ENABLE, 84 "IDENTIFIER_TBL" VARCHAR2(3 CHAR) NOT NULL ENABLE, 85 "SHIP_FROM_LOC" VARCHAR2(10 CHAR) NOT NULL ENABLE, 86 "ORD_ACCEPT_LOC" VARCHAR2(10 CHAR) NOT NULL ENABLE, 87 "ORD_ORIGIN_LOC" VARCHAR2(10 CHAR) NOT NULL ENABLE, 88 "STORE_LOC" VARCHAR2(10 CHAR) NOT NULL ENABLE, 89 "TITLE_PASSAGE" VARCHAR2(1 CHAR) NOT NULL ENABLE, 90 "TAX_GROUP" VARCHAR2(10 CHAR) NOT NULL ENABLE, 91 "TAX_USER_AREA" VARCHAR2(25 CHAR) NOT NULL ENABLE, 92 "TAX_TRANS_TYPE" VARCHAR2(1 CHAR) NOT NULL ENABLE, 93 "TAX_TRANS_SUB_TYPE" VARCHAR2(1 CHAR) NOT NULL ENABLE, 94 "NET_EXTENDED_AMT" NUMBER(26,3) NOT NULL ENABLE, 95 "GROSS_EXTENDED_AMT" NUMBER(26,3) NOT NULL ENABLE, 96 "REV_RECOG_BASIS" VARCHAR2(3 CHAR) NOT NULL ENABLE, 97 "PROJECT_ID" VARCHAR2(15 CHAR) NOT NULL ENABLE, 98 "BUSINESS_UNIT_OM" VARCHAR2(5 CHAR) NOT NULL ENABLE, 99 "ORDER_NO" VARCHAR2(10 CHAR) NOT NULL ENABLE, 100 "ORDER_INT_LINE_NO" NUMBER(*,0) NOT NULL ENABLE, 101 "SCHED_LINE_NBR" NUMBER(*,0) NOT NULL ENABLE, 102 "DEMAND_SOURCE" VARCHAR2(2 CHAR) NOT NULL ENABLE, 103 "DEMAND_LINE_NO" NUMBER(*,0) NOT NULL ENABLE, 104 "BUSINESS_UNIT_RMA" VARCHAR2(5 CHAR) NOT NULL ENABLE, 105 "RMA_ID" VARCHAR2(10 CHAR) NOT NULL ENABLE, 106 "RMA_LINE_NBR" NUMBER(*,0) NOT NULL ENABLE, 107 "PRODUCT_ID" VARCHAR2(18 CHAR) NOT NULL ENABLE, 108 "ORDER_DATE" DATE, 109 "PO_REF" VARCHAR2(30 CHAR) NOT NULL ENABLE, 110 "PO_LINE" NUMBER(*,0) NOT NULL ENABLE, 111 "CONTRACT_NUM" VARCHAR2(25 CHAR) NOT NULL ENABLE, 112 "CONTRACT_DT" DATE, 113 "CONTRACT_TYPE" VARCHAR2(15 CHAR) NOT NULL ENABLE, 114 "CONTRACT_LINE_NUM" NUMBER(*,0) NOT NULL ENABLE, 115 "FREIGHT_TERMS" VARCHAR2(10 CHAR) NOT NULL ENABLE, 116 "BILL_OF_LADING" VARCHAR2(30 CHAR) NOT NULL ENABLE, 117 "COUNTRY_SHIP_FROM" VARCHAR2(3 CHAR) NOT NULL ENABLE, 118 "COUNTRY_SHIP_TO" VARCHAR2(3 CHAR) NOT NULL ENABLE, 119 "SHIP_TO_CUST_ID" VARCHAR2(15 CHAR) NOT NULL ENABLE, 120 "SHIP_TO_ADDR_NUM" NUMBER(*,0) NOT NULL ENABLE, 121 "SHIP_ID" VARCHAR2(10 CHAR) NOT NULL ENABLE, 122 "SHIP_TYPE_ID" VARCHAR2(10 CHAR) NOT NULL ENABLE, 123 "SHIP_FROM_BU" VARCHAR2(5 CHAR) NOT NULL ENABLE, 124 "SHIP_DATE" DATE, 125 "SHIP_TIME" TIMESTAMP (6), 126 "PACKSLIP_NO" VARCHAR2(22 CHAR) NOT NULL ENABLE, 127 "LC_ID" VARCHAR2(12 CHAR) NOT NULL ENABLE, 128 "LOC_DOC_ID" VARCHAR2(15 CHAR) NOT NULL ENABLE, 129 "SEQUENCE_NBR" NUMBER(*,0) NOT NULL ENABLE, 130 "SOLD_TO_CUST_ID" VARCHAR2(15 CHAR) NOT NULL ENABLE, 131 "SOLD_TO_ADDR_NUM" NUMBER(*,0) NOT NULL ENABLE, 132 "BUSINESS_UNIT_PC" VARCHAR2(5 CHAR) NOT NULL ENABLE, 133 "BUSINESS_UNIT_CA" VARCHAR2(5 CHAR) NOT NULL ENABLE, 134 "RT_EFFDT" DATE, 135 "BILL_PLAN_ID" VARCHAR2(10 CHAR) NOT NULL ENABLE, 136 "PC_DISTRIB_STATUS" VARCHAR2(1 CHAR) NOT NULL ENABLE, 137 "BPLAN_LN_NBR" NUMBER(*,0) NOT NULL ENABLE, 138 "EVENT_OCCURRENCE" NUMBER(*,0) NOT NULL ENABLE, 139 "XREF_SEQ_NUM" NUMBER(*,0) NOT NULL ENABLE, 140 "CONTRACT_PPD_SEQ" NUMBER(*,0) NOT NULL ENABLE, 141 "ANALYSIS_TYPE" VARCHAR2(3 CHAR) NOT NULL ENABLE, 142 "RESOURCE_ID" VARCHAR2(40 CHAR) NOT NULL ENABLE, 143 "RESOURCE_TYPE" VARCHAR2(5 CHAR) NOT NULL ENABLE, 144 "RESOURCE_CATEGORY" VARCHAR2(5 CHAR) NOT NULL ENABLE, 145 "RESOURCE_SUB_CAT" VARCHAR2(5 CHAR) NOT NULL ENABLE, 146 "ACTIVITY_ID" VARCHAR2(15 CHAR) NOT NULL ENABLE, 147 "ACTIVITY_TYPE" VARCHAR2(5 CHAR) NOT NULL ENABLE, 148 "DIST_CFG_FLAG" VARCHAR2(1 CHAR) NOT NULL ENABLE, 149 "PRODUCT_KIT_ID" VARCHAR2(18 CHAR) NOT NULL ENABLE, 150 "SYSTEM_SOURCE" VARCHAR2(3 CHAR) NOT NULL ENABLE, 151 "EMPLID" VARCHAR2(11 CHAR) NOT NULL ENABLE, 152 "EMPL_RCD" NUMBER(*,0) NOT NULL ENABLE, 153 "START_DT" DATE, 154 "END_DT" DATE, 155 "FROM_DT" DATE, 156 "TO_DT" DATE, 157 "SERVICE_CUST_ID" VARCHAR2(15 CHAR) NOT NULL ENABLE, 158 "SERVICE_ADDR_NUM" NUMBER(*,0) NOT NULL ENABLE, 159 "NOTE_TYPE" VARCHAR2(10 CHAR) NOT NULL ENABLE, 160 "STD_NOTE_FLAG" VARCHAR2(1 CHAR) NOT NULL ENABLE, 161 "INTERNAL_FLAG" VARCHAR2(1 CHAR) NOT NULL ENABLE, 162 "HDR_OR_LINE_NOTE" VARCHAR2(1 CHAR) NOT NULL ENABLE, 163 "AR_LVL" VARCHAR2(1 CHAR) NOT NULL ENABLE, 164 "AR_DST_OPT" VARCHAR2(1 CHAR) NOT NULL ENABLE, 165 "GL_LVL" VARCHAR2(1 CHAR) NOT NULL ENABLE, 166 "ENABLE_DFR_REV_FLG" VARCHAR2(1 CHAR) NOT NULL ENABLE, 167 "BILLING_SPECIALIST" VARCHAR2(8 CHAR) NOT NULL ENABLE, 168 "BILLING_AUTHORITY" VARCHAR2(8 CHAR) NOT NULL ENABLE, 169 "BILLING_FREQUENCY" VARCHAR2(3 CHAR) NOT NULL ENABLE, 170 "BILL_INQUIRY_PHONE" VARCHAR2(24 CHAR) NOT NULL ENABLE, 171 "SALES_PERSON" VARCHAR2(8 CHAR) NOT NULL ENABLE, 172 "COLLECTOR" VARCHAR2(8 CHAR) NOT NULL ENABLE, 173 "CR_ANALYST" VARCHAR2(8 CHAR) NOT NULL ENABLE, 174 "INVOICE_FORM_ID" VARCHAR2(10 CHAR) NOT NULL ENABLE, 175 "STD_NOTE_CD" VARCHAR2(10 CHAR) NOT NULL ENABLE, 176 "TOT_LINE_DST_AMT" NUMBER(26,3) NOT NULL ENABLE, 177 "TOT_LINE_DST_PCT" NUMBER(5,2) NOT NULL ENABLE, 178 "TOT_LINE_DFR_PCT" NUMBER(5,2) NOT NULL ENABLE, 179 "TOT_LINE_DFR_AMT" NUMBER(26,3) NOT NULL ENABLE, 180 "TOT_LINE_UAR_AMT" NUMBER(26,3) NOT NULL ENABLE, 181 "TOT_LINE_UAR_PCT" NUMBER(5,2) NOT NULL ENABLE, 182 "SSN" VARCHAR2(9 CHAR) NOT NULL ENABLE, 183 "CHARGE_FROM_DT" DATE, 184 "CHARGE_TO_DT" DATE, 185 "SUBCUST_QUAL1" VARCHAR2(15 CHAR) NOT NULL ENABLE, 186 "SUBCUST_QUAL2" VARCHAR2(15 CHAR) NOT NULL ENABLE, 187 "REIMB_AGREEMENT" VARCHAR2(25 CHAR) NOT NULL ENABLE, 188 "TOT_DISCOUNT_AMT" NUMBER(26,3) NOT NULL ENABLE, 189 "TOT_SURCHARGE_AMT" NUMBER(26,3) NOT NULL ENABLE, 190 "ACCUMULATE" VARCHAR2(1 CHAR) NOT NULL ENABLE, 191 "VAT_TREATMENT_GRP" VARCHAR2(4 CHAR) NOT NULL ENABLE, 192 "COUNTRY_VAT_BILLFR" VARCHAR2(3 CHAR) NOT NULL ENABLE, 193 "COUNTRY_VAT_BILLTO" VARCHAR2(3 CHAR) NOT NULL ENABLE, 194 "VAT_TREATMENT" VARCHAR2(4 CHAR) NOT NULL ENABLE, 195 "PHYSICAL_NATURE" VARCHAR2(1 CHAR) NOT NULL ENABLE, 196 "COUNTRY_LOC_BUYER" VARCHAR2(3 CHAR) NOT NULL ENABLE, 197 "STATE_LOC_BUYER" VARCHAR2(6 CHAR) NOT NULL ENABLE, 198 "COUNTRY_LOC_SELLER" VARCHAR2(3 CHAR) NOT NULL ENABLE, 199 "STATE_LOC_SELLER" VARCHAR2(6 CHAR) NOT NULL ENABLE, 200 "VAT_SVC_SUPPLY_FLG" VARCHAR2(1 CHAR) NOT NULL ENABLE, 201 "VAT_SERVICE_TYPE" VARCHAR2(1 CHAR) NOT NULL ENABLE, 202 "COUNTRY_VAT_PERFRM" VARCHAR2(3 CHAR) NOT NULL ENABLE, 203 "STATE_VAT_PERFRM" VARCHAR2(6 CHAR) NOT NULL ENABLE, 204 "COUNTRY_VAT_SUPPLY" VARCHAR2(3 CHAR) NOT NULL ENABLE, 205 "STATE_VAT_SUPPLY" VARCHAR2(6 CHAR) NOT NULL ENABLE, 206 "STATE_SHIP_FROM" VARCHAR2(6 CHAR) NOT NULL ENABLE, 207 "STATE_SHIP_TO" VARCHAR2(6 CHAR) NOT NULL ENABLE, 208 "MAST_CONTR_ID" VARCHAR2(25 CHAR) NOT NULL ENABLE, 209 "TAX_CUST_ID" VARCHAR2(15 CHAR) NOT NULL ENABLE, 210 "BUSINESS_UNIT_AM" VARCHAR2(5 CHAR) NOT NULL ENABLE, 211 "BUSINESS_UNIT_AMTO" VARCHAR2(5 CHAR) NOT NULL ENABLE, 212 "ASSET_ID" VARCHAR2(12 CHAR) NOT NULL ENABLE, 213 "PROFILE_ID" VARCHAR2(10 CHAR) NOT NULL ENABLE, 214 "COST_TYPE" VARCHAR2(1 CHAR) NOT NULL ENABLE, 215 "STATE_VAT_DEFAULT" VARCHAR2(6 CHAR) NOT NULL ENABLE, 216 "SO_ID" VARCHAR2(15 CHAR) NOT NULL ENABLE, 217 "BUSINESS_UNIT_RF" VARCHAR2(5 CHAR) NOT NULL ENABLE, 218 "SOURCE_REF_TYPE" VARCHAR2(3 CHAR) NOT NULL ENABLE, 219 "SOURCE_REF_NO" VARCHAR2(35 CHAR) NOT NULL ENABLE, 220 "SOURCE_REF_KEY" VARCHAR2(5 CHAR) NOT NULL ENABLE, 221 "USER_AMT1" NUMBER(26,3) NOT NULL ENABLE, 222 "USER_AMT2" NUMBER(26,3) NOT NULL ENABLE, 223 "USER_DT1" DATE, 224 "USER_DT2" DATE, 225 "USER1" VARCHAR2(1 CHAR) NOT NULL ENABLE, 226 "USER2" VARCHAR2(1 CHAR) NOT NULL ENABLE, 227 "USER3" VARCHAR2(1 CHAR) NOT NULL ENABLE, 228 "USER4" VARCHAR2(1 CHAR) NOT NULL ENABLE, 229 "USER5" VARCHAR2(1 CHAR) NOT NULL ENABLE, 230 "USER6" VARCHAR2(1 CHAR) NOT NULL ENABLE, 231 "USER7" VARCHAR2(1 CHAR) NOT NULL ENABLE, 232 "USER8" VARCHAR2(1 CHAR) NOT NULL ENABLE, 233 "USER9" VARCHAR2(1 CHAR) NOT NULL ENABLE, 234 "SETID" VARCHAR2(5 CHAR) NOT NULL ENABLE, 235 "ADD_DTTM" TIMESTAMP (6), 236 "LAST_UPDATE_DTTM" TIMESTAMP (6), 237 "DELETE_ROWS" VARCHAR2(1 CHAR) NOT NULL ENABLE, 238 "BOOK" VARCHAR2(10 CHAR) NOT NULL ENABLE, 239 "DTTM_STAMP" TIMESTAMP (6), 240 "VAT_RVRSE_CHG_GDS" VARCHAR2(1 CHAR) NOT NULL ENABLE, 241 "TAX_CD_VAT_RVC" VARCHAR2(8 CHAR) NOT NULL ENABLE, 242 "TAX_CD_VAT_RVC_PCT" NUMBER(7,4) NOT NULL ENABLE, 243 "VAT_AMT_RVC" NUMBER(26,3) NOT NULL ENABLE, 244 "VAT_AMT_RVC_BSE" NUMBER(26,3) NOT NULL ENABLE, 245 "VAT_AMT" NUMBER(26,3) NOT NULL ENABLE, 246 "VAT_AMT_BSE" NUMBER(26,3) NOT NULL ENABLE, 247 "TAX_CD_VAT_PCT" NUMBER(7,4) NOT NULL ENABLE 248 ) 249 SEGMENT CREATION DEFERRED PCTFREE 10 PCTUSED 80 INITRANS 1 MAXTRANS 255 N OCOMPRESS LOGGING STORAGE 250 ( 251 INITIAL 16384 NEXT 16384 MAXEXTENTS 2147483645 PCTINCREASE 0 252 ) 253 TABLESPACE "AMAPP" ; Table created. Elapsed: 00:00:00.76 SQL> CREATE UNIQUE INDEX "SYSADM"."DRIVERTEST1" ON "SYSADM"."DRIVERTEST" 2 ( 3 "PROCESS_INSTANCE", "INTFC_ID", "INTFC_LINE_NUM", "TRANS_TYPE_BI", "TRA NS_TYPE_BI_SEQ" 4 ) 5 PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE 6 ( 7 INITIAL 16384 NEXT 106496 MAXEXTENTS 2147483645 PCTINCREASE 0 8 ) 9 TABLESPACE "PSINDEX" ; Index created. Elapsed: 00:00:00.04 SQL> SQL> drop table DRIVERTEST; Table dropped. Elapsed: 00:00:24.90
Thanks for any input.Mika wrote:
>
user as a result of the drop statementLet fall the waterfall DRIVERTEST table purge constraints;
>Translates into a decline of almost immediate table, why is this? Does this mean that the longest execution time has been only because the table has been preserved in the trash?
If correctly, I assume you're on Peoplesoft, you should try turn off the recyclebin before running the script generated by the application Designer, or purge the first recyclebin which could be huge because of the mechanism of migration of Peoplesoft.
Or probably better, in the configuration settings, tab "Alter", check "Alter in place" instead of "Alter by changing the Table name". "." The first will modify the table, to create a temporary table (fill in the former), drop the old, then rename the temporary table.And don't forget to add crazy missing "when sqlerror exit" at the beginning of the script, otherwise you could have a very sad surprise.
Nicolas.
Comment added to configuration settings
Published by: Gasparotto N on April 12, 2013 13:07 -
Dropped table not in the Recycle Bin
Hi all
I dropped a table, and was not in the basket while my recycle bin is enabled and the size is 50 M. Take a look below.
SQL > show parameter recycle
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
buffer_pool_recycle string
db_recycle_cache_size big around 52 M
Recyclebin string on
SQL > select * from students;
ID NAME MY
-- ---------- --
1 Max 20
2 John 30
3 ram 34
SQL > select * from recyclebin
2;
no selected line
SQL > drop table students;
Deleted table.
SQL > select * from recyclebin.
no selected line
SQL > select * from students;
Select * from students
*
ERROR on line 1:
ORA-00942: table or view does not exist
SQL > restoration
2
SQL >;
1 * restore
SQL > rollback;
Complete restoration.
SQL > select * from students;
Select * from students
*
ERROR on line 1:
ORA-00942: table or view does not exist
SQL > flashback table students before drop;
table students Flashback to before the fall
*
ERROR on line 1:
ORA-38305: object not in the Recycle BINread the thread below:
Why the table not deleted in recyclebin?Answer is there.
-
See the recyclebin not shown anything once drop table
currently test flashback table, but I wonder why recycle bin does not show anything after release? I check the parameter and the value is enabled. now it has me thinking there at - it a link between re-use locker, retention of undo and undo SCT size?
If so why it does not work on a undo_retention = 900, cancellation of TBS size = 100MB and the table that I dropped consisting of 1 single column and type of 3 lines data number, which is particularly small. is there something that I need to put more?
DB version is 10.2.0.1.0
Thank you!mitchykoi wrote:
It is also possible that all SYS objects can be stored or seen in a recyclebin?Only if the user Sys is store in a tablespace nonsystem as below,
SQL> conn / as sysdba Connected. SQL> create table test_rbin2(a char) tablespace users; Table created. SQL> select table_name, tablespace_name 2 from user_tables where table_name='TEST_RBIN2'; TABLE_NAME TABLESPACE_NAME ------------------------------ ------------------------------ TEST_RBIN2 USERS SQL> show recyclebin SQL> drop table test_rbin2 2 ; Table dropped. SQL> show recyclebin ORIGINAL NAME RECYCLEBIN NAME OBJECT TYPE DROP TIME ---------------- ------------------------------ ------------ -------------------TEST_RBIN2 BIN$l/0nppCwhObgQL4KFEMjfA==$0 TABLE 2010-12-22:09:12:39SQL>
You can see that the table is now in the recyclbin. Its actually the tablespace that would govern this thing. System tablespace is special and its objects are special treaties as well. The Sys user is supposed to be the owner of the system default tablespace (it's too) so by default, any drop table made here would not go to recyclebin.
as a recyclebin for system objects only?
No, there is no such thing.
Also, what are the importance of the following: buffer_pool_recycle, db_recycle_cache_size for the garbage?
Db_recycle_cache_size actually has Nothing to do with the Recyclebin except that it shares a common word with the latest. Buffer_pool_recycle also has nothing to do with the Recyclebin and actually, it has nothing to do at all of 10.1, because it is an obsolete parameter and is replaced by, guess what, db_recycle_cache_size .
HTH
Aman... -
Hallo why? When I update ios. When the image has finished error itunes and usb
Hallo why? When I update ios. When the image has finished error itunes and usb
Connect the iPhone to the computer that you are synchronizing usually with
and follow the prompts to iTunes on this computer. If you
do not generally in sync with a computer, you should always use
iTunes on a computer to complete the update.
-
Hi our friend has an old e-mail address on his old phone and e-mail account is now closed he should drop his photos and has a new email address, how he retrieve it please
Even if the e-mail account is closed the Apple is still valid. If he has forgotten the password, see: If you forgot your Apple ID - Apple Support password
What follows has instructions on how to change the e-mail address he serves his Apple ID: change your Apple - Apple Support ID
-
I did a reset on my iPad 2 and now it has an error message when I connect to my computer to access the backup. bed the error message, this iPad cannot be used because it requires a newer version of iTunes. How to upgrade the version of the ipad?
Take a look at the article, download the latest version of iTunes - Apple Support
-
nipalsm.exe has enerated errors
Whenever I boot, I get the error
nipalsm.exe has generated errors and will be closed by windows.
You will need to restart the program.
What is nipalsm?
This is a target computer that so far has DURATION LV 8.6.1 and niVISA duration 4.0 installed
You will get the point right here
-
Drop Table vi in database connectivity decreases not database file size?
Hello
I created a database access for use in my project to record data.
So I was simulating a month of a data value to see how big the db file would get in a month - so don't run out of space on my cRIO-, and it got to 6 MB. After I did, I used the vi Drop Table to remove all tables... However, the file size decreases at all?
Now it worries me because I'm not sure what will happen in the field. Why is the file still so great without data in it (apparently)?
I'm doing something wrong?
Any help will be appreciated.
Concerning
Mark
Dropping or deletion of the table of a database MS Access does not automatically release the space used by this table.
The only way I know to reduce the size of an Access MDB file should open with MS Access and run tools-> Database Utilities-> Compact and repair database...
You need exclusive access to the MDB file when you do...
Maybe you are looking for
-
Since firefox recently updated, .pdf files when clicked, either on the web or e-mail opens a box that says save file or open the file. Firefox updated and it does ask me again, just immediately try to download. I do not use any .pdf add on via Firefo
-
Get points of exclamation instead of text in Safari
Instead of text showing, all see is exclamation as the screenshot below points. It just started this week and I have to restart the computer and it still appears like this. Very well, things work in Chrome. Any ideas? Data sheet: OS X EL CAPITAN 10.1
-
I see the wallpaper but no icons, and no matter what I do, nothing happens
Once I started the only thing that shows is the wallpaper. There is no icons or the Start button. I tried to do CTRL + ATL + DEL and nothing happens. If I stopped and try to start it back up the password, nor all of the icons or start buttom appear.
-
BlackBerry Smartphones need help for a friend to put in place their email from bb
I have a bb bold and never had any trouble setting to the top of my email. But my friend has problems with it. She is on Verizon and was able to set up the email so that she could receive emails, but she is not able to send everyone's messages. It
-
Dose of Windows Photo Viewer does not work! Why?
My local disk C: / was full, so I moved my default folder for programs install on my E: /. Then the folder of the Windows Photo Viewer and others have been moved automatically to the new folder. And now my windows photo viewer will not work. I don't