nipalsm.exe has enerated errors

Similar Questions

• "Plugin - container.exe has stopped working" error during installation of Firefox 36.0 via SCCM if Firefox is open during installation.

  When installing Firefox 36.0 via SCCM (System Center Configuration Manager), if the previously installed version of Firefox is open during the new installation, an error, "Plugin - container.exe has stopped working. A problem caused the blocking of the program works correctly. Please close the program. This problem occurs only if Firefox is open during the installation, otherwise the installation is successful. Note: I have included a taskkill to 'firefox.exe' in my installation script to stop Firefox runs.

  There are new logic in Firefox 36 monitor to stop crashes while the Mozilla Crash Reporter can capture data. This could have the effect of killing her task, I'm not sure. Maybe you have to kill plugin - container.exe before firefox.exe? I'm not familiar with SCCM and it might have a more graceful way to close an application.

• I received error messages saying that hl2.exe has stopped working.

  HL2.exe has stopped working?

  original title: hl2.exe has stopped working

  Hi 1patrick1!

  Thanks for posting your question.  Here is some important information about the hl2.exe that can help.

  HL2. EXE has stopped working the issue

  Game error: HL2. EXE has stopped working

  Important:

  Please read the FAQ in the link below to determine if your question should be directed to the developer of the game or to the Steam support:

  Third-party game support

  General troubleshooting

  Game crashes can have several different causes depending on your system. The best way to determine that the problem is caused by East follow this guide first:

  Troubleshooting game crashes

  Windows Vista users

  There are several patches available for Vista users and Vista users with Nvidia cards. We recommend that you follow the Guide Windows Vista in its entirety.

  Anti-virus software

  Some software anti-virus and anti-spyware such as Norton/Symantec, AVG 7.5, Avast, Spyware Doctor and Nod32 have been confirmed to cause the game crashes with Source engine games. If disabling your antivirus software or security is not enough, you can consider completely uninstalling these applications until an update is published by the developers of antivirus software that resolves these compatibility issues. More information found in the section troubleshooting game crashes FAQ linked above.

  Background applications

  Graphically intense games such as half-life 2: Episode Two and Team Fortress 2 require a lot of your system resources to operate. Having background applications being run while you play can often result in the game engine competing for resources with other applications system. Often, this can cause the game to crash because it is not free enough for the game to use system resources. Please follow the guide below for more information:

  Disabling background Applications

  It is also important to ensure that your system has enough available expanded memory. Please follow this guide for more information.

  Hope it will be informative for you.

  The respect of

  Anurag Shukla
  Microsoft Certified Professional

• nipalsm.exe error

  I currently have LabVIEW 2009 installed and NiDAQ 9.0.1. I am trying to connect to cDAQ 9174, with the NI9401 and NI9263 modules. When you connect the cDAQ, that an error occurs:

  nipalsm.exe error

  The instruction at 0x6efdfde3 referenced memory at 0 x 00000034, the memory could not be 'read '.

  The cDAQ appears in the list of devices, but fails self-tests and nor modules are recognized. Also the cDAQ access to the list of devices cannot deleted even before the device is connected.

  I tried to use the program to software installation OR repair NIMAX and tried to uninstall and reinstall absolutely everything. (even on the complete reinstall the cDAQ device seems not connected on the list of the devices before connecting for the first time)

  have you seen this

• Error message "HPSF.exe has stopped working" whenever I have open hp support assistant HP g6

  I have thought honastly this laptop couldn't be worse. I downloaded the latest version of the hp support assistant after resinstalling windows and all the other stuff of hp and when I try to get updates from hp it comes up with a

  error message saying "HPSF.exe has stopped working" from there he returns constantly with Deputy of support every time error begins.

  Windows 7 64 bit

  Please try to uninstall, download of the last being and resettlement.

  Here is the link to the latest version of HP Support Assistant:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58915.exe

  Here is the link to the latest version of the HP Software Framework:

  http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59202.exe

  So here's a support document which guides you step by step: http://support.hp.com/us-en/document/c02435801

• Cannot install 2 black & white or command conquer games. Error:Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

  The error occurs when I insert the game black & white 2 or command and conquer the first decade and click install on a automotive screens popping up, I am sure that these two errors are almost identical and sure if one is fixed so will the other be.

  The error that says "Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »

  To try to fix it already I found a page here which tells me how to install drivers different installshield, and I installed everything that have been listed. My operating system is Windows Xp home edition

  Hello
  
  Were you able to install these games without any problem before?
  Step 1: Install all updates of windows on your computer and check the number.
  Reference: http://support.microsoft.com/kb/306525 
  
  Step 2: Copy the game on your computer, then check the issue.

  Step 3: Perform the clean boot your computer.

  
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
  Note: To restore your computer to a Normal startup mode, follow these steps:
  
  1. click on start in the box start the search.
  2. type msconfig and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.
  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• "NTVDM. EXE has encountered a problem and needs to close"error after installing the update of security KB2707511

  After you install the update of security KB2707511 when I try to open a ms - dos 16-bit program, I get the following error: "NTVDM. EXE has encountered a problem and needs to close. " Application does not start. I can run without error command.com. Uninstall KB2707511 in Control Panel, add & delete, the application works. Install KB2707511 error occurs.

  I have a lot of customers running a 16-bit MS-DOS - program that receives the same error.  It seems not to be a malware problem, as it is homogeneous across many machines (unless, of course, all have the same problem of malware).  By uninstalling the KB2707511 and the KB2709162 they all work. Something in these updates is in conflict with something in these dos programs causing the "NTVDM. Erorr EXE'.

• After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed.

  After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed" can someone help me?

  Hello

  Some research suggests that ProfileCnt.exe belongs to a wireless card or

  Ethernet card.

  Work using the boot minimum troubleshooting to identify the troublesome program,

  then uninstall/reinstall this program.

  331769-how to perform a procedure to clean boot (XP & Vista)
  http://support.Microsoft.com/kb/331796

  Alternatively, looking for C:\Program Files for the file ProfileCnt.exe can tell you

  What program is involved.

  Don

• Installation of QuickBooks 2012 gives the error "set.up.exe has encountered a problem and needs to close."

  I try to install new software Quickbooks 2012 on the computer that is running Windows XP. The installation will start and get error "set.up.exe has encountered a problem and needs to close." I spoke with Quickbooks technical support on this issue, but they have been unable to solve the problem. I have read several of these posts on this forum about this kind of mistake, but none seem to be directly related to my situation. I plan to try to reload the Windows XP operating system, but unfortunately, the CD is missing. I'd appreciate any help that anyone could have.

  original title: setup.exe error

  Hi Bill Gammon,.

  You can go ahead and try the suggestions and if the problem persists then I you suggest to run the Microsoft Fixit and then try to install Quickbooks 2012.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Let us know if that helps.

• How to install a driver for f4500? Error dot4_plugin.exe has stopped working

  I had this printer HP Desk Jet F4500 connected to my computer laptop operating system windows 7 64 bit for months now, the printer has no drivers and I can't get them.  I went on HP website and downloaded the base and the recommended full downloads and still the same error Stops the installation.  dot4_plugin.exe has stopped working the extent of attributes are inconsisitent.

  Help I am more than two hours in this and don't know where yet.

  I did some additional research on this issue, more specifically the error 'extended attributes are inconsisitent' and found that this seems to be a Windows problem. Here are a few things you can try to solve the problem:

  Method 1: Perform a scan of the file system (CFS) checker on your computer

  Steps to use the SFC/SCANNOW command:

  1. click on start-> click on all programs-> click Accessories-> right click on command prompt-> Select run administrator-> click on continue
  2. at the command prompt-> Type "sfc/scannow"-> press enter
  3. follow on-screen messages to start the analysis of the system (this process can take a long time)
  The following will happen:
  Start of the phase of verification of the scanning system of-> % of full audit.
  4. once the analysis is complete, you will see a message with one of the following:
  a. not found any breach of integrity
  b. find corruption but repaired
  c. corruption that he couldn't fix

  Method 2: System Restore will take your PC to a previous state when the PC worked.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start-> Type "System Restore" in the box start search-> click System Restore listed programs.
  Type your password-> click continue (if you have one)
  2. in the dialog box the system restore-> click on a different restore point-> click Next.
  3. in the list of restore points-> click a restore point created before you started having problems-> click Next-> click Finish.

• At startup, Error Message: dd.exe has encountered a problem and needs to close

  Every time you start the Error Message is: dd.exe has encountered a problem and needs to close. Close.

  "dd" is - in this list.  Looking more far over the line to SD in this list...

  What is the 'command' that launches the application (perhaps to widen the column to see everything) and what is its 'location' (perhaps to widen the column to see everything)?

  (Only for the DD.)

  You could uncheck here, restart and see if it happens again (it will not).

  Then, with the information that I just asked for, there's the real 'location' and remove the 'command' begins with manually to get rid of it permanently.

• applephotostreams.exe has stopped working error message

  I get the following error message every time that I reboot - it started after MS Update on 23/08/2012:

  IN MICROSOFT WINDOWS BOX:

  applephotostreams.exe has stopped working error message - a problem caused blocking the program works correctly. Windows will close the program and notify yu if a solution is available

  This is a link to the solution I found that worked for me...

  applephotostreams stops working

• "MessagingApp.exe has stopped working" error when I turn on the computer.

  In the last few days I have been making a "MessagingApp.exe has stopped working" message every time I spend on the laptop. When I go to "All programs" all windows and Yahoo programs are red in color. I did a search for "MessagingApp.exe" but it is not found, but when I looked in 'Program Files'-'alternative E-mail' I found it but it will not run. I can't connect to Yahoo Messenger.Can help you? I have Windows Vista Home Edition thank you, McEvor

  original title: error MessagingApp.exe

  Hello McEvor,

  1. don't you make changes to the system before the show?

  2. Since when have you been faced with this problem?

  Try the following steps to try to get the fixed number.

  Step 1:

  Try to put the computer in a clean boot state to see if the same message appears

  A clean boot helps eliminate software conflicts. Visit the link below to learn how to perform a clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Once the troubleshooting is over; reset the computer to start as usual in following step 7 from the link above.

  Step 2:
  An analysis of security and verification for infections.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  1. you can run a virus scan online from the link given below and check if the problem persists.

  Microsoft safety scanner

  2. in addition, make sure that you have installed on your computer, antivirus software was last updated so that it works correctly.

  If the problem persists, please contact support messenger yahoo from the link below for more support.

  http://help.Yahoo.com/l/us/Yahoo/helpcentral/

  Hope the helps of information provided.

• Display multiple instances of NTDVM. EXE running in Task Manager and get error ntvdm.exe has stopped working and was closed

  There is also another problem of ntdvm that I meet where the file ntdvm.exe continues to the multiple (i.e. numeorus ntdvm.exe files are running in the Task Manager) to the point where my computer slows down and ends by crashes.

  Very grateful for any solution for every problem!

  I am running vista.

  * original title - ntvdm.exe has stopped working and was closed...?  Recurring problem! *

  Hello

  1. don't you make changes to the computer before that happened?

  2. Once you get this error message?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:

   Also try to set up your computer in a clean boot state, and check if the same issue occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3:

  Try to scan your hard disk from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• In Vista, error "FINDFAST. EXE has stopped working and needs to close. "

  I get continually comes a msg as FINDFAST. EXE has stopped working and needs to close. What is this reference to? Liu

  Hi LaurieHead,
   
  -When exactly you receive this error message? It is to start the computer or when starting any application?
   
  We will put the computer in a clean boot state to identify the application at the origin of this problem:
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.