drop the site Amy Stine?

www.amystine.com is a site that adobe uses as an example to show the possibilities of muse. Now to my question... is it possible to do this kind of menus used with only scrolling muse?

Each of the top level in its "menu" items is a separate Accordion with one Panel widget. Menu items are the blocks of text with links on them that have been created in the content area of the Panel of the accordion. The accordion is set to open at first with all the panels closed (so only the tab upper level, the name of menu, appears when the page is first loaded).

I had not visited his site because it has redesigned it. Very ingenious.

Tags: Adobe Muse

Similar Questions

Firefox bookmarks bar does not allow me to drag-and - drop Web site icons. I went into the display and click on "bookmarks bar".

Firefox bookmarks bar does not allow me to drag-and - drop Web site icons. I went into the display and click on "bookmarks bar". bookmarks bar but her but its not allowing me to drag and drop the icon on the toolbar. I tried everything it is supposed to do, but his does not work. his frustration.

Stef. /. \

Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible.
- View > toolbars
- Right click on empty toolbar space
Use the toolbar (Customize) to open the Customize and set the toolbar to display items.
- Make sure the "bookmarks toolbar items" are on the personal bar
- If "Bookmarks Toolbar items" is not on the bookmarks toolbar, then FRY it in the palette of the toolbar in the window the bookmarks toolbar Customize
- If the missing elements are in the toolbar palette then drag them from the window, customize the toolbar
- If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar configuration
- https://support.Mozilla.org/KB/how+to+customize+the+toolbar
- https://support.Mozilla.org/KB/back+and+forward+or+other+toolbar+items+are+missing
You can check the problems caused by a corrupt localstore.rdf file if the above didn't help.
- http://KB.mozillazine.org/Corrupt_localstore.RDF

Can not access the site Web of John Lewis, get message server unexpectedly dropped the connection all the time

Use the iMac with El Capitan 10.11.1 & Safari 9.0.1

During the last week, I was unable to access the site Web of John Lewis and the message "Safari cannot open page www.johnlewis.com because the server dropped the connection unexpectedly. Sometimes this happens when the server is busy. Wait a few minutes and then try again"I retry but get the same message all the time. Can access all other sites ok.

I emptied the cache, deleted the cookies and history. Enter the name of the site in its entirety is not helped either.

Unable to access the Web by John Lewis site with my iPad either.

Help!

Try restarting/resetting the router.

Try a reboot.

Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

Isolate a problem by using a different user account

If the problem is still there, try to start safe mode using your usual account. Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

Safe mode - on El Capitan

Start Mode without failure-El Capitan.

Can I still create my site design by dropping the images, the texts and the text boxes or what I have to learn code?

Can I still create my site design by dropping the images, the texts and the text boxes or what I have to learn code?

Database coding (HTML & CSS) is necessary to get the most out of DW. It of not an app drag & drop like Photoshop or Illustrator.

If coding isn't your strong point, try Adobe Muse. MU is for designers and non-codeurs enjoy working in a GUI. You are limited with what you can build with MU. So don't expect to do advanced stuff or you will not be disappointed. But for the basis of hobby, charity or vanity sites, MU might be all you need.

Nancy O.

File menu Flash dropdown, drops down on the site from loading in the browser.

File menu Flash dropdown, drops down on the site from loading in the browser.
< removed by mod >

Include code in your ad that deals with the appearance of the menu drop down. Something is triggering fall without having to interact with him... It will take just a stop(); command in the script if it's an animation timeline.

Lack of drop down in the Site Manager

I am designing the presentation for my layout of product e-commerce (Ecommerce BC and Muse) - watch the video support/training it is assumed that me several options in the Site Manager. I don't have Web Forms and email system.
I don't have a page; module templates, etc.
Any suggestions or knowledge available?
Thank you-

Hello

Please activate the edition online by going to my details > scroll down > enable editing online.

It would also depend on the plan of the site you have selected.

Thank you

Sanjit

Can I get the Firefox search bar for not automatically, go to the site of the search engine I spend?

The Firefox search bar seems to have changed since the last update. I understand that things are changing constantly and get used to them, but I wonder if it is possible to change the rear bar to the way it was, or at least understand why it changed.

Basically, I used to be able to switch from search engines by choosing from the drop-down list, and would not put me right at the site of this search engine. He didn't actually bring me to the site once I hit the search button (or enter). It's quite annoying to have to remember to open a new tab before changing search engines in order to avoid sailing away from the tab that you are currently on, and it's also annoying that when you open a new tab and change the search engines, you are immediately taken to the site of this search engine. It feels like an extra step (ranging from 'the empty tab search engine page to search result' instead of 'empty tab to search result').

I know it sounds like a minor complaint, no doubt, but I'm really really curious to know why it was changed. More important, I want to know if there is a way to customize the way it was.

Thanks for any help!

Many users have been raising this issue. I mentioned the same question in this post here: https://support.mozilla.org/en-US/questions/1086138

In summary, it seems that the Firefox team is not intend to bring back the ability to return to the old bar search, which was possible (but in a very biased way) in older versions of 42. For now, you can either:
- Download module additional classic restaurateur theme to https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/?src=ss and then select the old search option
- Go back to Firefox 42 and set the browser.search.showOneOffButtons property in Subject: config. However, with older versions poses a risk to the security that you won't have bug fixes provided with version 43

Once I refreshed, when I go to pull down to a previous visit, it loads the address bar, but will not go on the site.

Everything was going well until I refreshed Firefox. Since then, the address bar does not work. If I type in a website or attempt to use the drop-down menu to access a previous site, the site loads but does not "join the service or go the arrow." It is used to automatically load, now it won't load at all! I am running Windows XP

You are running Firefox in compatibility mode for Windows 98 (NT 4.10) according to the user agent.
- Mozilla/5.0 (Windows NT 4.10; rv:36.0) Gecko/20100101 Firefox/36.0
Make sure that you are not Firefox running in compatibility mode.
You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

Reinstalling the software after replacing the drive, ability to access the sites via Firefox gradually shrunk so I can not possibly download a new copy of

Need to reinstall all the software for non-native Mac (OS 10.9.1) at a MacBookPro 2009 vintage, I had installed Firefox v. 27. As I tried to connect to the web links (which many were not problematic), I started gradually to meet the pages that would never load. Then I got a similar behavior with URL entered manually (only some; gradually more frequent). I had installed some standard modules of privacy, but I uninstalled then them. I tried to reset Firefox without result. I freshly reinstalled (or so I thought) nothing works. I tested the performance against the native Safari and initially had some problems but could access certain websites. At the point where I realized I should do a clean removal of Firefox, I was no longer able to access to any site of Mozilla in any way, except the Help menu on the installed copy and who wouldn't let me download a new copy of v.27. I was able to access a CNet Firefox download page, and he agreed than an interrupted download request but each test (5). I'm hoping to learn a way (may need to be drop the a v. 27 dmg, but hope not) to return to the operation.

I am also successfully to access the download sites. I think that it is now OK. Thanks a lot for the replies and suggestions. The firewall seems to have been it.

Since upgrading to Firefox 10.0.2 my AVG extension had to be disabled, because key after typing in any web address in the address bar, had no effect and I couldn't go to the site without pressing the arrow of charging on the right.

I've recently updated Firefox to the latest version 10.0.2. After that I could not enter any website address and press the Enter key and get on the site, neither could I select a Web site in the drop-down list of sites visited previously. The only way I could get there by pressing the arrow to the right of the address box (reload current page). Once I disabled the extension AVG, everything worked normally. As soon as I activated the extension AVG, it stopped working again.

Known issue. See:
- http://www.avgforums.com/viewtopic.php?f=4 & t = 1726 #p6050
Try what sc123 suggested the link above. Send an email to [email protected] with your full license key and let them know. I'm sure his AVG question not related Firefox. :))

How can I put shortcuts to websites in a bar (?) tool bar/browser... dunno what it's called. With IE, I can just drag the tab of the site to the area I want.

How can I put shortcuts to websites in a bar (?) tool bar/browser... dunno what it's called. With IE, I can just drag the tab of the site to the area I want

Near the right end of the address bar is a White Star which can be hard to see, but look closely. When you want to add a shortcut to the toolbar, double-click the star. A window opens with the name of the Web page. Under this is the area of folder which will probably read "Unsorted Bookmarks". Click on the drop down arrow and change it to "Bookmarks Toolbar", then click done.

I have several folders on my toolbar such as music, Mail, etc. in which I add several Web sites. If you want to add a folder, click on the second drop-down arrow next to "Bookmark Toolbar" and click on "New folder" and give it a name.

To add a bookmark to a folder, once again double click on the star, make sure you're in the bookmarks bar and click one of the fall of two arrows to find the name of the folder.

For other bookmarks use Menu bookmark. What is added here are accessible through bookmarks in the menu bar. If your Menu bar with bookmark, file, display, etc. is not visible, click the ALT key and they will become visible. To keep the menu bar, click view, toolbars and check the menu bar.

Now when I create a bookmark window is not open and ask me where I want to drop the bookmark. Why?

When I try to bookmark a website the window which allows to open and ask me where I wanted to drop the bookmark no longer opens. It is now just the bookmark under General bookmarks. How to add to a specific folder of bookmarks?

You have the extension installed McAfee Site Advisor?

If so, disable it. A recent update to this extension is breaking this part of Firefox bookmarks.

If this is not the case, this extension, you have this problem when running in Firefox SafeMode?

http://support.Mozilla.com/en-us/KB/safe+mode

Do not choose anything at the moment, just use 'continue in safe mode.

If this is not the case, see this:

http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

Site to site VPN, I need all internet traffic to exit the site.

I have 2 sites connected via a pair of SRX5308

A = 192.168.1.0/24

IP WAN = 1.1.1.1

B = 192.168.2.0/24

IP WAN = 2.2.2.2

Now what I need to do, is to have all traffic from B to go to the site one even traffic destined to the internet. That is, I need internet traffic out of our network with the IP 1.1.1.1, even if it is from the network B.

On my I have set up a route 1.1.1.1 of the ISP, then a value by default 0/0 to 192.168.1.1 it ASA knows how to get to the peer VPN is a more specific route, but sends everything above the tunnel, at the remote end which then hairpin of ASA routes internet outside its own WAN port traffic.

I can understand though not how to so the same thing on the pair of SRX5308 they either don't raise the tunnel or internet route to the local site address B.

Anyone have any ideas?

I need to do this because we are logging and monitoring of internet traffic to A site via tapping from upstream to various IDS solutions and will not (cannot) reproduce this to all our remote sites.

Thank you

Dave.

After some more thought and testing I came up with a workable solution to my own problem. I'll share it here in case it can help others.

(1) use the wizard at both ends to implement a normal VPN that connects the two segments of network 192.168.1.0 and 192.168.2.0

(2) go to site VPN - VPN policy remote router192.168.2.1 and click Edit

(a) disable Netbios

(b) select "None" from the drop-down list the remote IP address.

(c) to apply the change

3) go to the VPN-> VPN policy on the head end site (192.168.1.1) and click Edit

(a) disable Netbios

(b) select "None" from the drop-down list the local IP address

(c) to apply the change

Now all the traffic wil go down the VPN tunnel and exit to the internet on the site of head end. Hope this helps others with the same question.

Tunnel established but no traffic passing on the Site 2 Site VPN

I have a cisco 2900 series construction of a site-2-site of the ASA 5510 vpn tunnel. The tunnel works out very well, but I can't get the traffic through the tunnel. I have read several other posts and tried a lot of suggestion (probably to break things in the process). I don't know if I'm not nat all messed up or if my access lists on the router are goofy. Any help is greatly appreciated.

THE ASA CONFIG:

ASA 4,0000 Version 1
!
hostname test-fw
domain ficticious.local

names of
!
interface Ethernet0/0
nameif outside
security-level 0
IP address *. *. * 255.255.255. *.
!
interface Ethernet0/1
nameif inside
security-level 100
IP 192.168.3.2 255.255.255.0
!
interface Ethernet0/2
nameif DMZ - TNS
security-level 10
IP 192.168.31.1 255.255.255.0
interface Ethernet0/3
nameif DMZ-SMTP
security-level 9
192.168.32.1 IP address 255.255.255.0
!
interface Management0/0
nameif cradelpoint
security-level 1
192.168.254.1 IP address 255.255.255.0
!
boot system Disk0: / asa844-1 - k8.bin
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS server-group DefaultDNS
domain ficticious.local
network object obj - 172.16.3.2
host 172.16.3.2
network object obj - 172.16.7.2
Home 172.16.7.2
network object obj - 172.16.10.2
Home 172.16.10.2
network object obj - 172.16.13.2
Home 172.16.13.2
network object obj - 192.168.3.0
subnet 192.168.3.0 255.255.255.0
network object obj - 192.168.4.0
subnet 192.168.4.0 255.255.255.0
network object obj - 192.168.5.0
192.168.5.0 subnet 255.255.255.0
network object obj - 192.168.6.0
192.168.6.0 subnet 255.255.255.0
network object obj - 192.168.7.0
192.168.7.0 subnet 255.255.255.0
network object obj - 192.168.8.0
192.168.8.0 subnet 255.255.255.0
network object obj - 192.168.9.0
192.168.9.0 subnet 255.255.255.0
network object obj - 192.168.10.0
192.168.10.0 subnet 255.255.255.0
network object obj - 192.168.12.0
255.255.255.0 subnet 192.168.12.0
network object obj - 192.168.13.0
192.168.13.0 subnet 255.255.255.0
network object obj - 192.168.15.0
192.168.15.0 subnet 255.255.255.0
network object obj - 192.168.16.0
192.168.16.0 subnet 255.255.255.0
network object obj - 10.1.0.0
10.1.0.0 subnet 255.255.0.0
network object obj - 192.168.32.10
Home 192.168.32.10
network of the NETWORK_OBJ_192.168.20.0 object
host 192.168.20.0
network of the NETWORK_OBJ_192.168.20.0_24 object
subnet 192.168.20.0 255.255.255.0
network of the NETWORK_OBJ_192.168.3.0_24 object
subnet 192.168.3.0 255.255.255.0
network object obj - 192.168.0.0_16
Subnet 192.168.0.0 255.255.0.0
network of the NETWORK_OBJ_192.168.0.0_24 object
192.168.0.0 subnet 255.255.255.0

network of the NETWORK_OBJ_192.168.3.0 object
host 192.168.3.0
network of the NETWORK_OBJ_192.168.3.144_28 object
subnet 192.168.3.144 255.255.255.240
network object obj - 192.168.50.11
network object obj - 192.168.30.10
host 192.168.30.10
network object obj - 192.168.40.10
Home 192.168.40.10
network object obj - 192.168.70.10
Home 192.168.70.10
network object obj - 192.168.150.10
Home 192.168.150.10
network object obj - 192.168.160.10
Home 192.168.160.10
network object obj - 10.10.10.10
host 10.10.10.10
network object obj - 192.168.120.10
Home 192.168.120.10

access-list extended Out-In deny an ip
outside_1_cryptomap to access extended list ip 192.168.3.0 allow 255.255.255.0 192.168.0.0 255.255.255.0
pager lines 24
Enable logging
timestamp of the record
information recording console
registration of information monitor
debug logging in buffered memory
recording of debug trap
debugging in the history record
asdm of logging of information

Outside 1500 MTU
Within 1500 MTU
MTU 1500 DMZ - TNS
MTU 1500 DMZ-SMTP
cradelpoint MTU 1500

no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP deny everything outside
ICMP deny any inside
ICMP deny all DMZ - TNS

ARP timeout 14400
NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.3.144_28 NETWORK_OBJ_192.168.3.144_28 non-proxy-arp-search to itinerary
NAT (inside, outside) static source all all NETWORK_OBJ_192.168.0.0_24 of NETWORK_OBJ_192.168.0.0_24 static destination
!
network object obj - 172.16.3.2
NAT dynamic interface (indoor, outdoor)
network object obj - 172.16.7.2
NAT dynamic interface (indoor, outdoor)
network object obj - 172.16.10.2
NAT dynamic interface (indoor, outdoor)
network object obj - 172.16.13.2
NAT dynamic interface (indoor, outdoor)
network object obj - 192.168.3.0
NAT dynamic interface (indoor, outdoor)
network object obj - 192.168.4.0
NAT dynamic interface (indoor, outdoor)
network object obj - 192.168.5.0
NAT dynamic interface (indoor, outdoor)
network object obj - 192.168.6.0
NAT dynamic interface (indoor, outdoor)
network object obj - 192.168.7.0
NAT dynamic interface (indoor, outdoor)
network object obj - 192.168.8.0
NAT dynamic interface (indoor, outdoor)
network object obj - 192.168.9.0
NAT dynamic interface (indoor, outdoor)
network object obj - 192.168.10.0
NAT dynamic interface (indoor, outdoor)
network object obj - 192.168.12.0
NAT dynamic interface (indoor, outdoor)
network object obj - 192.168.13.0
NAT dynamic interface (indoor, outdoor)
network object obj - 192.168.15.0
NAT dynamic interface (indoor, outdoor)
network object obj - 192.168.16.0
NAT dynamic interface (indoor, outdoor)
network object obj - 10.1.0.0
NAT dynamic interface (indoor, outdoor)
network object obj - 192.168.32.10
NAT (DMZ-SMTP, outside) static 12.200.89.172
network object obj - 192.168.50.11

Route outside 0.0.0.0 0.0.0.0 *. *. *. * 1
Route inside 10.1.0.0 255.255.0.0 192.168.3.1 1
Route inside 10.10.0.0 255.255.0.0 192.168.3.1 1
Route inside 10.200.0.0 255.255.0.0 192.168.3.1 1
Route inside 172.16.3.2 255.255.255.255 192.168.3.1 1
Route inside 172.16.7.2 255.255.255.255 192.168.3.1 1
Route inside 172.16.10.2 255.255.255.255 192.168.3.1 1
Route inside 172.16.13.2 255.255.255.255 192.168.3.1 1
Route inside 192.168.4.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.5.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.6.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.7.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.8.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.9.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.10.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.12.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.13.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.15.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.16.0 255.255.255.0 192.168.3.1 1
external route 192.168.20.0 255.255.255.0 *. *. *. * 1
Route inside 192.168.30.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.40.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.50.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.70.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.100.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.120.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.150.0 255.255.255.0 192.168.3.1 1
Route inside 192.168.160.0 255.255.255.0 192.168.3.1 1

card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set peer 1.1.1.1
card crypto 1 ikev1 transform-set cradelpoint_vpn set outside_map
card crypto outside_map 1 the value reverse-road
outside_map interface card crypto outside

Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
a basic threat threat detection
host of statistical threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
no statistical threat detection tcp-interception
NTP 10.1.2.13 Server prefer
SSL-trust outside ASDM_TrustPoint0 point

tunnel-group 1.1.1.1 type ipsec-l2l
tunnel-group 1.1.1.1 ipsec-attributes
IKEv1 pre-shared-key *.
!
class-map IPSclass
match any
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map IPSpolicy
class IPSclass
IPS inline help
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
class class by default
Statistical accounting of user
!

Router config:

Current configuration: 2605 bytes
!
! Last modification of the configuration at 18:39:30 UTC Tuesday, August 7, 2012
! NVRAM config update at 19:50:03 UTC Monday, August 6, 2012
! NVRAM config update at 19:50:03 UTC Monday, August 6, 2012
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec

!
router host name
!
boot-start-marker
boot-end-marker
!
!
activate the bonnefin password
!
No aaa new-model
!
!
No ipv6 cef
IP source-route
IP cef
!
!
!
!
!
name-server IP 192.168.100.1
!
Authenticated MultiLink bundle-name Panel
!
!
Crypto pki token removal timeout default 0
!

!
!
!
redundancy
crypto ISAKMP policy 2
preshared authentication
address of crypto isakmp key 6 IBETYOUCANTGUESS *. *. *. *
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac cradelpoint_vpn
!
map SDM_CMAP_1 1 ipsec-isakmp crypto
Description Tunnel to *. *. *. *
set peer *. *. *. *
Set transform-set cradelpoint_vpn
match address 100
!
!
!
!
!
the Embedded-Service-Engine0/0 interface
no ip address
Shutdown
!
interface GigabitEthernet0/0
no ip address

Shutdown
!
interface GigabitEthernet0/0
no ip address
IP nat inside
IP virtual-reassembly in
automatic duplex
automatic speed
No cdp enable
!
interface GigabitEthernet0/0.1
encapsulation dot1Q 1 native
the IP 192.168.0.1 255.255.255.0
IP nat inside
IP virtual-reassembly in
No cdp enable
!
interface GigabitEthernet0/0.2
encapsulation dot1Q 2
No cdp enable
!
interface GigabitEthernet0/0.3
encapsulation dot1Q 3
No cdp enable
!
interface GigabitEthernet0/1
DHCP IP address
automatic duplex
automatic speed
No cdp enable
map SDM_CMAP_1 crypto
!
interface Serial0/0/0
no ip address
Shutdown
no fair queue
!
IP forward-Protocol ND
!
no ip address of the http server
no ip http secure server
!
overload of IP nat inside source list 110 interface GigabitEthernet0/1
overload of IP nat inside source list sheep interface GigabitEthernet0/1
IP route 0.0.0.0 0.0.0.0 192.168.100.1 254
IP route 0.0.0.0 0.0.0.0 192.168.100.1 254
IP route 192.168.3.0 255.255.255.0 192.168.3.1
!
Access-list 100 = 4 SDM_ACL category note
Note access-list 100 IPSec rule
access-list 100 permit ip 192.168.0.0 0.0.0.255 192.168.3.0 0.0.0.255
access-list 110 deny ip 192.168.0.0 0.0.0.255 192.168.3.0 0.0.0.255
!
!
!
!
sheep allowed 10 route map
corresponds to the IP 110
!
!
!
control plan
!
!
!
Line con 0
line to 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
transport output pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line vty 0 4
opening of session
transport of entry all
!
Scheduler allocate 20000 1000
end

Ahh, looks like the CradelPoint router could have dropped the ESP package, as we can see the router is to encrypt the packets, but the ASA receives nothing / decrypts, which means it does not even reach the ASA.

Activate the NAT - T, so ESP is encapsulated in UDP/4500.

On ASA:

Crypto isakmp nat-traversal 30

Unable to connect to the site Web SSL VPN with firewall zone configured

I recently updated my 2911 company and set up a firewall area. This is my first experience with this and I used Cisco Configuration Professional to build the configuration of the firewall first and then edited the names to make it readable by humans. The only problem I can't solve is to learn site Web SSL VPN from outside. I can navigate the website and connect without problem from the inside, and even if it was useful to verify that the Routing and the site work properly it is really not what I. I don't get anything on the syslog for drops because of the firewall server, or for any other reason but packet capture show that no response is received when you try to navigate to the outside Web site. I am currently using a customer VPN IPSEC solution until I can get this to work and have no problem with it. I have attached a sanitized with the included relevant lines configuration (deleted ~ 400 lines including logging, many inspections on the movement of the area to the area and the ipsec vpn, which I already mentioned). I searched anything about this problem and no one has no problem connecting to their Web site, just to get other features to work correctly. All thoughts are welcome.

See the security box

area to area

Members of Interfaces:

GigabitEthernet0/0.15

GigabitEthernet0/0.30

GigabitEthernet0/0.35

GigabitEthernet0/0.45

area outside zone

Members of Interfaces:

GigabitEthernet0/1

sslvpn area area

Members of Interfaces:

Virtual-Template1

SSLVPN-VIF0

I tried to change the composition of the area on the interface virtual-Template1 to the outside the area nothing helps.

See the pair area security

Name of the pair area SSLVPN - AUX-in

Source-Zone sslvpn-area-zone of Destination in the area

Service-SSLVPN-AUX-IN-POLICY

Name of the pair area IN SSLVPN

Source-Zone in the Destination zone sslvpn-zone

service-policy IN SSLVPN-POLICY

Name of the pair area SELF SSLVPN

Source-Zone sslvpn-area free-zone Destination schedule

Service-SELF-to-SSLVPN-POLICY

Zone-pair name IN-> AUTO

Source-Zone in the Destination zone auto

Service-IN-to-SELF-POLICY policy

Name of the pair IN-> IN box

In the Destination area source-Zone in the area

service-policy IN IN-POLICY

Zone-pair name SELF-> OUT

Source-Zone auto zone of Destination outside the area

Service-SELF-AUX-OUT-POLICY

Name of the pair OUT zone-> AUTO

Source-Zone out-area Destination-area auto

Service-OUT-to-SELF-POLICY

Zone-pair name IN-> OUT

Source-Zone in the Destination area outside zone

service-strategy ALLOW-ALL

The pair OUT zone name-> IN

Source-out-zone-time zone time Zone of Destination in the area

Service-OUT-to-IN-POLICY

Name of the pair area SSLVPN-to-SELF

Source-Zone-Zone of sslvpn-area auto

Service-SSLVPN-FOR-SELF-POLICY

I also tried to add a pair of area for the outside zone sslvpn-zone passing all traffic and it doesn't change anything.

The area of networks

G0/0.15

172.16.0.1 26

G0/0.30

172.16.0.65/26

G0/0.35

172.16.0.129/25

G0/0.45

172.18.0.1 28

Pool of SSL VPN

172.20.0.1 - 172.20.0.14

Latest Version of IOS:

Cisco IOS software, software C2900 (C2900-UNIVERSALK9-M), Version 15.0 (1) M10, RELEASE SOFTWARE (fc1)

Glad works now. Weird question, no doubt.

I guess that on the deployment guide said that the firewall will not support inspection of TCP to the free zone, however, class nested maps are used to accomplish this, to be completely honest, I think it's a mess and the best thing to do is action past to auto for the protocols that you want and then drop the rest.

Let us know if you have any other problems.

Mike

drop the site Amy Stine?

Similar Questions

Maybe you are looking for