Site to site VPN, I need all internet traffic to exit the site.

I have 2 sites connected via a pair of SRX5308

A = 192.168.1.0/24

IP WAN = 1.1.1.1

B = 192.168.2.0/24

IP WAN = 2.2.2.2

Now what I need to do, is to have all traffic from B to go to the site one even traffic destined to the internet. That is, I need internet traffic out of our network with the IP 1.1.1.1, even if it is from the network B.

On my I have set up a route 1.1.1.1 of the ISP, then a value by default 0/0 to 192.168.1.1 it ASA knows how to get to the peer VPN is a more specific route, but sends everything above the tunnel, at the remote end which then hairpin of ASA routes internet outside its own WAN port traffic.

I can understand though not how to so the same thing on the pair of SRX5308 they either don't raise the tunnel or internet route to the local site address B.

Anyone have any ideas?

I need to do this because we are logging and monitoring of internet traffic to A site via tapping from upstream to various IDS solutions and will not (cannot) reproduce this to all our remote sites.

Thank you

Dave.

After some more thought and testing I came up with a workable solution to my own problem. I'll share it here in case it can help others.

(1) use the wizard at both ends to implement a normal VPN that connects the two segments of network 192.168.1.0 and 192.168.2.0

(2) go to site VPN - VPN policy remote router192.168.2.1 and click Edit

(a) disable Netbios

(b) select "None" from the drop-down list the remote IP address.

(c) to apply the change

3) go to the VPN-> VPN policy on the head end site (192.168.1.1) and click Edit

(a) disable Netbios

(b) select "None" from the drop-down list the local IP address

(c) to apply the change

Now all the traffic wil go down the VPN tunnel and exit to the internet on the site of head end. Hope this helps others with the same question.

Tags: Netgear

Similar Questions

  • RV180 VPN route all internet traffic via IPSec VPN

    Hello

    I install my RV180 to VPN to our headquarters Fortigate 60 C. It works really well

    My only problem is that I don't know how to move internet traffic on our remote site by Headquarters. We want to use this technique so that all sites have the same web content filtering provided by our main Fortigate unit. I see clearly that all traffic destined to our internal network will go trough the VPN tunnel, but internet traffic will go through our modem at the remote site.

    My way of fortigate thinking said that I need a static route to transfer all traffic through the VPN tunnel. I've read elsewhere that I need to set up some sort of ACL.

    Anyone else has any ideas on this / has anyone successfully implemented somehting similar?

    Hi Jared,

    I don't think that RV180 takes complete care of tunneling. Complete tunneling allows you to all your traffic to VPN. RV180 made only split tunneling.

    Thank you

    Vijay

    Sent by Cisco Support technique iPad App

  • Route Internet traffic against the default VPN on SAA route

    I want to transfer all internet traffic to a VPN connection via the internal network and not divided the digging of tunnels or direct connection to the internet from the OUTSIDE interface.

    I have a VPN connection default gateway, so all traffic is pushed back on the OUTSIDE interface when the VPN is in place and the user connects to the Internet.

    Is it possible to send Internet traffic to the INSIDE interface, internal network, to route to the Internet.

    I'm not looking for another solution, it's the design, I would like to implement.

    As always, any help is greatly appreciated.

    Of course you can, simply set the following text:

    Route inside 0.0.0.0 0.0.0.0 in tunnel

    The foregoing will force all VPN traffic after be decrypted to the next break of the SAA within the interface defined above

  • Do I need an internet connection to play music from Apple?

    Hello, I will be visiting by air soon, I need an internet connection to enjoy the music, that I loaded into my Apple iPhone music Playlist? Thank you.

    Start here:

    Add music catalog to Apple's music to your library on your iPhone, iPad, iPod touch, Mac, or PC - Apple Support

  • Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!

    Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!

    and I don't know that if Apple make a system more freely, there no need for any device on Earth but iPhone.

    http://www.Apple.com/feedback/

  • How to make a friendly Muse site in all internet browsers?

    I check my website in Chrome which shows me my site as it is in the Muse... but in Internet Explorer, it shows the text out of whack, is there a way to make this site user-friendly in all internet browsers?

    It should be located on a public server to see... If you have a subscription to Muse, you should have the possibility of using Business Catalyst with subscription you.

    BusinessCatalyst is an outside server where you download and test your web site, without being direct, you can also share the URL so that other people can see.

  • For the last 24 hours, whenever I try to access the Forums from McAfee site, get message, "Internet Explorer cannot display the webpage."

    I was an active member of this forum for more than a year and was just on the site yesterday.  Yet, for some reason, today, I can not access the site.  I tried clicking on a search link, manually type in the name of the site... nothing works.  All I ever get is the message "Internet Explorer cannot display this webpage";  no error codes... no nothing!

    I have no trouble access to other sites with the exception of the McAfee site.  I know that the site is running.

    UPDATE: for some strange reason, now all of a sudden I can again access McAfee Forum site this morning.  Still have no idea what happened here, but at least that the problem is now solved... I hope!

    Thnks a lot for your time!

    Hello

    I am happy to know that your problem is solved. In case, if you need help, you can always post your questions as well as your valuable suggestions in this forum.

  • site to site vpn - internal network even on both sides of the tunnel

    Hi all

    I have the following questions about the Site Site VPN using ASA 5510 and 5505

    Scenerio is

    1. we have five branches & headquarters

    2. we want to establish a vpn between branches & Head Office (VPN from Site to Site)

    3. all branches & head office using the same internal network (192.168.150.0 255.255.255.0)

    My question is

    How can I configure VPN site-to-site between branches & head office with the same internal network (192.168.150.0/24)

    Please help me with the configuration steps & explanation

    I have experience on setting up vpn site to site between branches with differnet internal network (for example: 192.168.1.0/24 and 192.168.2.0/24)

    Waiting for your valuable response

    Hello

    Here are a few links on policy nat

    http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00808c9950.shtml

    http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008046f31a.shtml#T10

    http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00807d2874.shtml

    Concerning

  • Message "this connection is not approved. After choosing 'I understand' Add 'except' and 'confirm dry', need me a modified version of the site.

    Almost all sites Web generates a message "this connection is not approved. After choosing "I understand the risks", "Add exception" and "Confirm Security Exception", it takes me to a lighter version of the site that looks nothing like the real site. Also, I get this message on the sites of Mozilla trying to solve the problem. Under the technical details, it reads, "the certificate is not reliable because no sender string has been provided. (Error code: sec_error_unknown_issuer) "the articles I've read on this subject do not seem to help.

    This happened after I restored it firefox to default settings. I have a copy of my personnel file on my desktop. I tried to put it back in, but nothing changes. I've deleted and reinstalled firefox a few times.

    Any idea would be appreciated. Thank you for your community!

    Unfortunately, certificates of do_not_trust could be a sign of unwanted software on your pc that is to intercept the secure network traffic. go to the system control panel and uninstall programs such as BrowserSafeguard, BrowserSafe, backup or other software that seems suspicious and did not get intentionally installed by you.

    Reference: https://support.mozilla.org/en-US/questions/982532#answer-520145

    afterwards, run a full scan of your system with security tools like the free version of malwarebytes & adwcleaner.

    Fix Firefox problems caused by malicious software

  • Being new to such things, I designed a web site to read on a computer. If I make a Tablet and a mobile design I need different URLS for them on the same site or the devices will be able to open those instead of the computer?

    Being new to such things, I designed a web site to read on a computer. If I make a Tablet and a mobile design I need different URLS for them on the same site or the devices will be able to open those instead of the computer?

    Muse deals, each device uses the correct layout. You n ' to do anything, except to create the respective pages.

  • How to downgrade a Web site Web hosting live for free on the Internet that comes with the subscription of the CC + bases

    How to downgrade a Web site Web hosting live for free on the Internet that comes with the subscription of the CC + bases.

    Thanks in advance,

    Sean

    Hi Sean,.

    Unfortunately, it is not possible to use your paying on your site location free creative cloud site.

  • My client has an operational Web site. He had me he recast in Muse. What do need me and how to publish the new design of its host/server?

    My client has an operational Web site. He had me he recast in Muse. What do need me and how to publish the new design of its host/server?

    Hi Jefffrey

    I think that your request is answered by live chat.

    Please do not hesitate to contact us again.

    Thank you

    Sanjit

  • Need all drivers for Win XP on Satellite L40 - 14G.

    I want to change OS Vista on XP Pro OS. Need all drivers L40 - 14G for XP operating system. Thank you very much!

    Sorry, I can not confirm your photo... I was there 2 minutes on the site to download drivers and the link WORKS!

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

    Click on the link and download the drivers, the link works! Please try with another browser (internet explorer, Firefox)!

  • NAT VPN tunnel and still access Internet traffic

    Hello

    Thank you in advance for any help you can provide.

    I have a server with the IP 192.168.1.9 that needs to access a subnet remote from 192.168.50.0/24, through the Internet.  However, before the server can access the remote subnet, the server IP must be NAT'ed to 10.1.0.1 because the VPN gateway remote (which is not under my control) allows access to other customers who have the same subnet address that we do on our local network.

    We have a 2801 Cisco (running c2801-advsecurityk9 - mz.124 - 15.T9.bin) set up to make the NAT.  It is the only gateway on our network.

    I have configured the Cisco 2801 with the following statements of NAT and the relevant access lists:

    access-list 106 allow host ip 192.168.1.9 192.168.50.0 0.0.0.255

    NAT extended IP access list
    refuse the host ip 192.168.1.9 192.168.50.0 0.0.0.255
    deny ip 192.168.1.0 0.0.0.255 192.168.3.0 0.0.0.255
    ip permit 192.168.1.0 0.0.0.255 any

    route allowed ISP 10 map
    corresponds to the IP NAT

    IP nat EMDVPN 10.1.0.1 pool 10.1.0.1 netmask 255.255.255.0
    IP nat inside source list 106 pool EMDVPN
    IP nat inside source map route ISP interface FastEthernet0/1 overload

    When the server (192.168.1.9) attempts to ping on the subnet of 192.168.50.0/24 devices, the VPN tunnel is established successfully.  However, after that, the server is no longer able to access the Internet because the NAT translation for 192.168.1.9 has changed since the external IP address of the router (FastEthernet0/1) at 10.1.0.1.

    The documentation I've seen on the site of Cisco says that this type of Setup allows only host subnet communication.  Internet access is not possible.  However, maybe I missed something, or one of you experts can help me.  Is it possible to configure the NAT router traffic destined to the VPN tunnel and still access the Internet by using the dynamic NAT on FastEthernet0/1?

    Once again, thank you for any help you can give.

    Alex

    Hello

    Rather than use a pool for NAT

    192.168.1.9 - 10.1.0.1 > 192.168.50.x

    ACL 102 permit ip 192.168.1.9 host 192.168.50.0 0.0.0.255

    RM-STATIC-NAT route map permit 10
    corresponds to the IP 102

    IP nat inside source static 192.168.1.9 10.1.0.1 card expandable RM-STATIC-NAT route

    ACL 101 deny host ip 192.168.1.9 192.168.50.0 0.0.0.255
    ACL 101 by ip 192.168.1.0 0.0.0.255 any
    overload of IP nat inside source list 101 interface FastEthernet0/1

    VPN access list will use the source as 10.1.0.1... *.

    Let me know if it works.

    Concerning

    M

  • Cannot access Internet when connected to the VPN

    I have mobile users using the Cisco VPN (4.0.5B) connection to a 837 customer. They can connect and access resources network in-house/remote ok. However, they are unable to access the Internet at the same time. I also had this problem where some users were connecting in a PIX, but managed to settle only by using the vpngroup tunnel of splitting and appropriate ACL commands. All I can find on the Cisco site is that it is possible by specifying an ACL, bit I don't know where to specify them this and that. Thank you.

    Here are examples of code,

    access-list 100 permit ip<837 inside="" net=""><837 inside="" net="" mask="">

    ISAKMP crypto client configuration group ciscovpn

    key cisco123

    pool vpnpool

    ACL 100

Maybe you are looking for