Dualboot error

Similar Questions

• During the installation of Windows 7 on 10 error (dualboot) 0 x 0000428

  Hey guys now I have a laptop that was windows 8.1 and I upgraded too 10, now I want to double cabin with a windows 7. the problem is that it keeps giving me this error when I try to install it on my other drive.

  I have 4 drives on my laptop, to the top with a total of 2 to a value of space, 500 for each, 10 windows operating system is in the first drive, and I want to install windows 7 on my last drive.

  but when installing my laptop restarts this message pop ups

  

  and when the windows 10 re appears as it won't let me load the installation appears

  

  so can you guys pls help me out a little here, because I am in a bind and can't quite figure how to manage and deal with the mess that I am in

  Windows 10 laptop, Install and dual boot windows 7 on it - Original title

  Hello

  Thanks for posting in the community.

  We understand your concern and we will provide the necessary assistance to help you solve the problem.

  I would like to inform that you can not install Windows 7 because of a file error as described in the error message. However, I would suggest that you refer to employment provided below that can help you correct the problem and successfully install Windows 7.

  Link 1: Refer to the post by Killian Ahmed

  http://answers.Microsoft.com/en-us/Windows/Forum/all/winloadexe-oxc0000428/4648db7e-0d99-4446-B207-dd6911a4b535

  Link 2: refer to the post by Andre Da Costa

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/0xc0000428-or-0x428-cannot-verify-digital/e1d3a09a-5e62-4B87-8e56-0bc33ddbab33

  For more information on dual-boot Windows 7 and 10 refer to the article below

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-dual-boot-Windows-7-and-Windows-10-preview/9e9b6066-d99b-4D2F-84dc-38e646c3c6ae

  With regard to the error message that you receive during indexing in your computer may be due to the failure of the Windows 7 installation. This is why it clearly states that you need to consult with the Advisor to upgrade the version of Windows that you are trying to install has failed.

  Hope this information helps

• Android and Windows 8 DualBoot - Acer W700P

  Hi folks, I'm David from South America and I have this great Tablet since last year, that's great, but I would like to install android and Android, so that I can dualboot windows 8.

  I tried to install the latest 'android - 4.2.2_r1 - ia2"use"Generic UEFI Installer", I followed the steps as shown in the quick start page, but I found problems between the path, the first was a message while trying to start mode EUFI saying that the:

  DiskName % has been blocked by the current security policy

  then I read somewhere that the implementation of a supervisor password would allow me to change the settings of the UEFI, within those parameters has been an option for select trust uefi files, browsing the UEFI USB created in the quickstar page and select all the files in a folder called efi EFI, I could then start the first screen of the installer , and then you try the manual installation option gives me an error and get stuck there...

  I know that some people were succesfull install Android from the page open source intel so please could you share the steps to follow to install Android and have dualboot with the large W700

  Please share your comments, because for sure, there are a lot of people willing to try the DualBoot - Android and windows 8

  Disable your security strategy uefi on yout start menu, assign an administrator password and disable the security check. DualBOOT android AI on w700 has been done successfully.

• Trying to Setup dual boot with XP and Vista, but Vista is stuck in a boot loop, error 0xc0000225

  Hello

  I have a Windows Vista Home Basic, and I wanted it to dualboot with XP.

  XP does not work very well, but when I want to start vista, its stucks after start the screen with the moving bar.

  When I try to start in safe mode it stucks when the drivers are loaded, and when I want to run the Startup Repair, it is said:

  Cannot start Windows

  0xC0000225 a required device is not connected or is not accessible

  I tried to run CHKDSK, but when I do its very long taking ~ 2 hours ~ but I have strength finsihed it completely yet. How long CHKDSK can take? And this can solve it?

  EDIT: CHKDSK has completed, but vista is still not start

  I have a Compaq Presario CQ60

  Thank you

  Original title: bootloop vista 0xc0000225

  Hello

  Method 1:
  Try to disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except the keyboard and mouse and then start.

  
  Method 2:
  I also suggest that you do the startup repair using the Windows Vista installation disc and check if it works.
  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.
  a. Insert the installation disc.
  b. restart your computer.
  Click the Start button, click the arrow next to the button lock and then click on restart.
  c. If prompted, press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  d. choose your language settings, and then click Next.
  e. click on repair your computer.
  f. Select the operating system you want to repair, and then click Next.
  g. in the System Recovery Options menu, click Startup Repair
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
  
  Method 3:
  You can also follow the steps in the article knowledge base provided and check.
  Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/919529
  Check out the links to learn more:
  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540
  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
  http://support.Microsoft.com/kb/927392

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information".

  http://support.Microsoft.com/kb/927391

   

• Error code 8007005 early upgrade 0 x

  I encounter an error at the beginning of the installation of Windows 7 upgrade. Shortly after the start of the installation process, the screen indicates "Setup is copying temporary files...". "which is followed by an error dialog box"Windows could not create an installation folder. "Error code: 0 x 8007005. Then the installation stops.

  It seems that the error code 0 x 8007005 is an "Access denied" error To solve the problem, I ran Process Monitor on the setup.exe process and watched for him to attempt to create the folder "C:\~windows.bt". The setup.exe Windows 7 will only attempt to create this file in the same place before giving up; a second partition on my hard drive. This secondary partition is not a windows partition, but rather a partition ext3 for Linux (my machine is dualboot), which of course can not access Windows Vista. I have no idea why setup.exe to install the temporary folder, but I hope that there is a way to report the installation to the right partition.

  Hi Josh Derr,.

  Thanks for posting. To install the temporary files to another drive please follow these steps.

  Click on start then run
  Next to open it, type 'CMD '.
  Now, in the command line type "D:" (or whatever drive letter is currently assigned to your DVD drive)
  Then type "setup.exe /tempdrive:DriveLetter ' (this drive letter must be your bigest partition. Of setup.exe /tempdrive:C)
  Let Setup continue restart your computer and completing the upgrade.

  I hope this helps!

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 winload.exe error 0 x 0000428

  I installed vista and seven in dual boot. I installed vista with seven being previously. Bootmgr is missing, so I've used visual BCD to fix and then windows 7 has disappeared from the start screen. I used Easy BCD to create a new entry for in the splash screen using the player in which he has been installed. Now, when I tried to get I get the following error.

  Due to some recent hardware change blah blah blah...

  File:\Windows\System32\winload.exe

  Status: 0xc0000428

  Info: Windows cannot verify the digital signature for this file.

  They say to use F8, but pressing F8 I get the same screen. I can only access seven when I have a dvd bootable seven in my dvd player. And then, I installed seven but the same problem is still there. I tried to use the fix in seven dvd but it said it had fixed a few problems and then restarted without any solution. What should I do?

  Give me a detailed but easy tracking solution to...

  Hello

  This problem may occur if the bootstrapper does not find Windows 7 boot sector or boot file.

  Follow these steps:

  In Vista, open an elevated command prompt, Type (or copy and paste these if you wish).

  CD /d f:\windows\system32

  then press enter

  BCDboot f:\windows /s c:

  and then press ENTER.

  Close command prompt.

  Restart the pc.

  See this link - http://www.sevenforums.com/installation-setup/30572-problem-dualboot-vista-7-winload-exe-error-2.html

• no connection is available error on desktop

  all of a sudden I lost the Internet connection and for some reason any Windows does not connect to the network adapter, the adapter is enabled, but I can't seem to connect.

  It is a wired connection.

  Also, I dualboot with Linux on my machine and this partition connects very well. don't know what's the problem, I have rebooted several times and activated/deactivated my card several times.

  Any help is appreciated.

  Hello

  1. have you made changes on the computer before this problem?
  2. you receive an error message or error code?

  Try the following and see if it helps.
  
  
  Method 1:
  
  Run the Windows 7 network troubleshooting: http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

  
  Method 2:

  Why I can't connect to the Internet?: http://windows.microsoft.com/en-US/windows7/Why-can-t-I-connect-to-the-Internet

  Method 3:

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

• I have a PIPO W3f 10.1 inch Android 4.4 + Tablet PC in Windows 8. It is a Tablet dual boot. I'm stuck on the Windows 8.1 with the side Bing with an 0xc0000034 error code.

  I have a PIPO W3f 10.1 inch Android 4.4 + Tablet PC in Windows 8.  It is a Tablet dual boot.  I'm stuck on the Windows 8.1 with the side Bing with an 0xc0000034 error code.  I have tactile and available USB.  Any help would be appreciated!  Also, once I get Windows running again how do I start to Android?  This option is missing.

  Hello

  Thanks for posting your query in Microsoft Community.

  This problem may be due to a corrupt or damaged files in the system partition or boot record that are required for Windows 8.1 start successfully. You may need to run the automatic repair of Windows 8.1.

  However, I would recommend at this point, contact the manufacturer of the Tablet for the best support possible, since you use dualboot.

  Please respond to this topic, after you talk with the manufacturer so that we can continue to research the issue and help you accordingly.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• SUMIF error

  I'm new to apple and get a syntax error when you use SUMIF.  In my table, I just need column F to test the value of column E.  If it is greater than 0, then divide by 20.  Thank you!

  In cell F1

  = E1/if(E1>0, 20, 1)

  fill down as needed

• An error in this Applescript that I can't understand

  Hi, I searched some forums and found this script below which I modified. It works great except for a single statement:

  runScript If = 1 then number error -128 I want the script to do is, when a USB drive is mounted and is in the ignoredVolumes as "USB Untitled" I want the script to stop. What I can't understand is, runScript is set to 1, "Untitled USB" Monte, runScript is not changed, why don't the script stops with an error "user cancelled"? On the other hand, if a key USB Monte is not in the ignoredVolumes, runScript is set to 2 and copy the file I want it. What hurts? It's probably something that will be very obvious when I see the answer.

  Thanks for any help with this problem,

  Mike.

  
  

  
  

  property ignoredVolumes: {'10,10 30 1. 5 't', 'files 1. 5 't', "Untitled USB"} - add if necessary

  property videoExtensions: {"avi", "mov", "mpg", "wmv", "mp4" and "mkv"}

  the value newVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / new")

  the value oldVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / old")

  game runScript to 1

                 tell application "System events".

  the value rootVolumes to disk (POSIX file ' / Volumes ' in the text)

  the value allVolumes to name of every element of disc of rootVolumes

  the value numofallVolumes to the County of allVolumes

  Repeat with the present book in allVolumes

  say application 'Finder '.

  if (the present book is not in ignoredVolumes and (this book as text) is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  runScript If = 1 then number error -128 - it does not give a 'User cancelled' error when "Untitled USB" is mounted

  runScript If = 2 then

                                                                          try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / new ") as text) to newVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in folder a." buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  Try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / old ") as text) to oldVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in the folder B" buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  display the dialog box "USB key will Auto Eject in 10 seconds or click OK... "buttons button 1 with the title"copy Complete - Eject? "default {'OK', 'No'} which gives after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the button returned of result is "OK" or gave up a result then ejection of the this book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  end if

  end if

  end if

  end say

  end Repeat

            end say

  The way in which your external block If is currently based, the script can't do anything when this book is in the ignoredVolumes, it can not yet test the runScript value. Try something like this:

  If the present book is in the ignoredVolumes then

  game runScript to 1

  on the other

  if (the present book as text is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  end if

  end if

  
  

  Of course, you need to remove a "end if' the end of the script.

  
  

  
  

• error message when try to sync the iPhone, "invalid response from the device?

  What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

  -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.

• Display Rotation error

  Hello

  I had a problem with the rotation of the screen under macOS Sierra function. As the screen rotates, there is an error that pop up and later that I'm unable to get into system-> Display Preferences. It is for me a "mistake preferably: County not load display preferences" message and I was unable to rotate the screen back. I started from the system in safe mode and temporarily solved the problem. But if I want to rotate the screen again, it pops up the same error again. I was using the rotation function pretty well in OS X El Capitan. But since I updated to macOS Sierra, I had this problem.

  I wanted to know if there is a lasting solution to this problem.

  I'm using macOS Sierra on MacBook (13-inch, early 2015) Air with processor 1.6 Ghz Intel Core i5 and 8 GB memory DDR3 at 1600 MHz with 128 GB of storage.

  Hello PavanGJ,

  Thank you for using communities Support from Apple. I see that since upgrading to Mac OS Sierra problems of screen rotation. The preferences window does not. I know how it is important for your Mac to work reliably. I'll be more than happy to help.

  Great job to test mode without failure. In Safe Mode disables most of the third-party services, it could be a compatibility problem with an application that you have. Check out this article:

  OS X El Capitan: If you have problems with startup items

  You can not hold account that the title suggests it's to El Capitan. It applies to macOS Sierra as well.

  You can also test the issue in a new user account.

  How to test a question in another account on your Mac - Apple Support

  Let us know if that helps.

  Take care!

• A fact error 4014 showing each time after all the steps

  One of my friends has an iPhone 5 s and he lowered his 10 9.3.5 iOS iOS iPhone it started and inquired "side update" to the rest of the new software update points, but suddenly her iPhone off and does not turn, does not yet show the Apple Logo. I tried to restore it with the new version of the iOS 10.0.2, I file the software theipsw and then restoring the iPhone, iTunes showed me the message "waiting for iPhone" and ultimately showed me a message by this sentence "iPhone" his name' siphons ' could not be restored.» An unknown error occurred (4014).

  I checked the list of steps that Apple suggests their, but nothing happened then, always showing me the same error number. What should I do?

  Thank you for your help and appreciate it.

  I found the solution. Just type here for others with the same problem to solve their problems.

  While the "iTunes with cable" sign is showing and in your computer, showing you "Waiting for iPhone" and things occur, you should restart your iPhone (hold sleep/wake low and low home together for a few seconds) implemented after this attempt to restore your iPhone again you should recover your iPhone software.

  Thank you for your support and more.

• Playgrounds are learning to code 1 download error

  I recently bought an iPad Mini 2 specifically so that I could use the app to playgrounds to learn about Swift.  Whenever I try to download the playing field 'Learn to Code 1 - basics of the swift' I get an error that says: "not taken download error supported URL.  I uninstalled and reinstalled the soft playgrounds several times.  Other playgrounds (as 'learning to Code 2 - beyond the basics') download very well.  How can I bypass or fix this error and get the first playground of lesson?

  

  Finally, the playing field is downloaded successfully!