Duplicate an object while turning

Similar Questions

• Setting width of objects while turning

  Hi everyone, just this problem is going to be really hard to explain without being able to show you exactly what I mean, but I'll do my best and if I confuse you so please tell me!

  I am working to set up a game at the present time that is similar in many ways to the mini-golf (or mini-golf, depending on where you come from). It shows a side view and play the user must select the ball by pressing the mouse, and then drag the mouse to indicate the direction that they want to shoot the ball in. The distance that they drag the mouse (it has a limit of course) determines the power of their shot.

  I currently use a triangular object with the point placed in the center of the ball to show the user the direction they have chosen. This triangle turns to deal with the position of the mouse, and I am trying to lengthen/shorten the distance between the mouse and the balloon-based. I have the code in place (below) that works when the mouse is either left or right side of the ball, but has rather strangely when the mouse is above or below the ball. When the mouse is in one of the last locations, the triangle extends to be much greater than the maximum length allowed by the program, but a trace shows that it is still within acceptable limits! You can see what the problem is here? I almost start thinking that Flash is switching the attributes 'width' and 'length' autour when the object rotates of 90 or - 90 degrees!

  The code I use is:

  If (ballSelected)

  {

  
  trajectory.rotationZ = Math.atan2 ((mouseY-ball.y), (mouseX-ball.x))*180/Math.PI - 0.3;)
  var tipPos:Point = new Point (trajectory.x, trajectory.y); The position of the tip of the triangle
  var mousePos:Point = new Point (mouseX, mouseY); The position of the mouse
  Trajectory.Width = methods Point.distance (mousePos, tipPos); Need sorting
  trace ("affecting width:" + trajectory.width);
  If the maximum size of //Limit (trajectory.width > 200)
  {

  
  Trajectory.Width = 200;

  
  }

  }

  Here are a few screenshots of the game as it is also - please do not laugh at the art of the horrible placeholder currently: none of this is final haha (note also that I did not implement 'gravity' yet, so everything is sort of glide through the air.) The first image shows the code works as I want what it with the triangle to its maximum width, the second shows the triangle's "enormous."

  

  

  Yes, it seems that there is something wonky with the width property. However setting the scaleX property seems to work for me. I'm not sure why you are simply by changing a single dimension of a movieclip to represent a "trajectory", but it seems to work for me:

  var path: MovieClip;
  var ball: MovieClip;

  Trajectory.x = ball.x;
  Ball.y = trajectory.y;

  stage.addEventListener (Event.ENTER_FRAME, rotate);

  function rotate(e:Event) {}
  Trajectory.rotation = Math.atan2 (mouseY - ball.y, mouseX - ball.x) * 180 / Math.PI;
  var dx:Number = mouseX - trajectory.x;
  var dy:Number = mouseY - trajectory.y;
  var dist:Number = Math.sqrt (dx * dx + dy * dy) / 200
  Dist trajectory.scaleX =<2 dist="" :="">
  }

  You can use the Point class to determine the distance, but I think it could be faster.

  I'd probably actually use the drawing api to draw the triangle that I wanted, but since I don't know exactly what you are trying to accomplish...

• Duplicate resource objects are displayed while the resource supply

  Duplicate resource objects are displayed while supply organization after you create a new workflow thanks to the export of the resource and the import process.
  A workfolw already exists in the environment, and I'm trying to replicate the workflow under a different name. So I import all the components associated with the provision of workflow rename the names of the items and make the necessary changes and import back. After that, I'm getting duplicate objects in resource displayed during commissioning of the resource organization .plz help.its urgent

  This is why I say that this is the problem with your xml only. She is creating new resource each time.

• I get this error while turning on the firewall manually ": {26EE0668-A00A-44D7-9371-BEB064C98683}\3\::{4026492F-2F69-46B8-B9BF-5654FCO7E423}" "."

  I get this error while turning on the firewall manually

  Here are a few steps to try troubleshooting:
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows7/cant-connect-to-a-network

  If those who do not work, let us know exactly what is happening and when.
  B Eddie

• While turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  About a week ago I just bought windows mobile 8 is installed. Now for the last two days while turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  To stop, I get three option 1) sleep 2) arrested update 3) and close

  What should I do?

  Original title: windows update issue 8.

  Hi Parichay,

  The updates that are being invited to install are automatic updates.

  The message you get is offered by Windows 8 after that updates are downloaded and installed.

  If you do not restart your computer soon, Windows will force a restart of your computer two days after that it has installed new updates to complete their installation.

  You must restart your computer at a convenient time for you, rather than wait two days and have it suddenly reboot maybe at an inopportune time.

  Hope that solves your problem.

• Duplicate an object and create it move on the stage

  Hello

  I'm having a problem in actionscript 3.0 game development. The game plan is to have planes flying across the screen and the player must shoot by clicking on it. As the player gets more points, it must be of planes flying across the screen. No matter what I try, I can't work. Can anyone offer any coding suggestoins for coding in general and him duplicate the object and spawning it out side of the scene.

  Create the plan as a library item and assign a class name (for example you name Plane).  To create a new instance of it you just use...

  var another_plane:PLane = new Plane();

  addChild (another_plane);

  planes.push (another_plane);

  The last line place the plane newly created in a table that you set above all create so that you have a way to target the various plans which, added to the process (moving, etc) them.  When one of them is no longer at stake, you can remove the table so that it gets not be processed.

• How to display an object while ALT-do drag and copy, then release?

  Hello

  I'm working on Indesign version 8.0.1 with my new Macbook, but when I duplicate an object, it will not show the object when I'm dragging all by pressing ALT. I can only see part of the object, but not the object itself, until I actually pick up, which is really a lot of time and practice. It wasn't a problem on my computer where I work. Anyone know if this has something to do with preferences?

  
  Thank you, any help is appreciated!

  Instead of just dragging. ALT + click and for a second or more.

  And then drag.

  You can also set your preferences to draw immediate live

  but I suggest that, as it can slow performance of InDesign considerably.

  Bob

• Spinning object around while turning around another object?

  How can these movements at the same time ? (THE ARROWS ARE JUST TO EXPLAIN WHAT IS THE MOVEMENT, THE ONLY OBJECTS ON THE SCREEN ARE THE STARS) The blue arrows represent the movement of all the stars around the center of the circle, and the Red arrows represent the movement of each star around its own Center?

  

  Make the star.  Make a layer; its default anchor point position the exact Center of the model.  Place the star too far from the null value as you like it and that parent to null.  Animate the rotation of the null value.  Animate the rotation of the star.  Fact.

• Movement of an object that turns off the Tracking screen?

  Thoght I saw someone in a tutorial, adjust the location of marker of track with a modifier key.  Then I found this: effects http://vfxhaiku.com/2011/12/how-to-track-an-object-that-goes-off-screen-with-adobe-after-e /

  And the bottom of the comments, someone said this:

  "D.S. Says:

  05:31, 6 July 2012

  There's a thing in AE, so you don't have to guess after follow-up.
  Hold down the alt/option key while dragging to the new trackmark. AE automatically knows that you choose a new and done a track without sewing. »

  I can't get this to work. Anyone know the correct way to do this?

  Thank you!

  Personally, I would use mocha. It will do a much better job in less time, and past outside of objects are not problems.

  If you use AE tracker then you want to move the area of follow-up in the Alt/Option key while doing drag the cross at the center of the area of follow-up after the cursor change but not while on the anchor.

  If you need to adjust the anchor and then not hold down a modifier key, place the cursor just until the cursor turns into a smaller cross with the kind of white outline. Big cross moving surface, small removals cross anchor.

• Select several files and store in table: folder object type turns into a string?

  Hello

  I'm trying to implement the following:

  The user selects a folder (which contains subfolders) in a dialog box:

  Set Dateiauswahl = CreateObject. BrowseForFolder (0, "Verzeichnis Park", 512, mess_path)

  Folder value = CreateObject ("Scripting.FileSystemObject"). GetFolder (Dateiauswahl.Self.Path)

  All subfolders of the selected folders are listed in two variables with the overall picture:

  Call GlobalDim ("FolderList (" & Ordner.SubFolders.Count - 1 & "" ")" ")

  Call GlobalDim ("FolderPaths (" & Ordner.SubFolders.Count - 1 & "" ")" ")

  f = 0
  for each Unterordner in Ordner.SubFolders
  FolderList (f) = Unterordner.Name
  FolderPaths (f) = Unterordner
  f = f + 1

  next

  Only later the files of some of the subfolders should be stored in another file list table:

  f = 0
  for q = 0 to UBound (selection)
  Unterordner = FolderPaths (selection (q))
  Call MsgBox (Unterordner)
  For each file in Unterordner.Files
  If instr (1, File.Name, "Speed") = 0 then
  FileList (f) = File.Path
  f = f + 1
  end if
  Next

  next

  Now I seem to have a problem with the type data stored in the FolderPaths table. While Unterordner is a Folder object and must be a Folder object for each file in Unterordner.Files to work, store in the array it transformed into a string variable.

  I don't really understand why and am looking for a solution so that I can extract single table FolderPaths subfolders and then extract the files.

  Hi maliya,.

  To assign an object to an array element (or any other variable), you must use the Set syntax, like this:

  Set FolderPaths (f) = Unterordner

  Then later you can retrieve it with the same syntax:

  Set Unterordner = FolderPaths (selection (q))

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• You can duplicate an objects in illustrator as you do in After Effects?

  In After Effects shapelayer you can create an object and the duplicate in a script inside the AE and decide how many copies and where they should be placed.
  Would be great if this could be a similar thing in illustrator.
  If you want to create bricks in a wall or windows in a House.

  If this is not such a thing how you create bricks in a wall without having to copy and paste several times.

  / Mattias

  Have a look at the appearance Panel and the deformation and transformation > transform effect.

  This allows to make multiple copies and add many effects that can be changed whenever you like.

  The result can be saved as a graphic Style.

  So, do a search of appearance and graphic styles in the help file.

• Dynamic filters deactivation on dynamic objects while making connections in CC

  This just started today, but in trying to apply a filter of "Sharpness" to a .gif (video file) Smart Object, visibility of the filter turns off as soon as I click on the play button in the timeline panel.

  My approach is this:

  > Save the .gif on computer

  > Leader open .gif in PS CC

  > Convert all layers of dynamic object

  > Apply the sharpness filter to the smart object to create the smart filter

  > Click on 'Play' on the Timeline

  > * ISSUE: the smart filter becomes invalid. It won't save even when you export for the Web.

  I made connections for years using this process and it never became a problem until today. I wonder if it's just a bug in this version of PS CC? It's super annoying! Any help I could get would be fantastic. Thank you!

  To keep track, I'm not sure your workflow, but I'm guessing that at a given time convert you a chronology of "animation image" GIF to a collage "video". We are trying to fix a bug for the dynamic filters on video editing. The bug involved filters that do not have a dialogue window, sharpen, sharpen more, etc. These filters would be disabled to play or export. This could be the problem you see now. This problem appeared in Photoshop CC 2015. It will be fixed in the next update of Photoshop.

  -Alan

• return the objects while maintaining the position on the page

  Is there a a way to return multiple objects at the same time while maintaining their position on the page without having to select each individually? For example, if I had a box of text at the top and bottom of a page, choose both and then reversed them, rather than the top text box swapping with that down they times remain in the same place but flip backwards?

  In Illustrator, you'd have the transformation of each command to do this, but in InDesign, you must use the function transform once again, which, if you're just flipping 2 objects records all the steps. But, let's say you want to return 16 objects as you describe... in place.

  Select one and choose object > transform > Flip (Horizontal or Vertical)...

  Now select the other 15 and choose object > transform again > transform again individually

• Duplicate the object until the work plan limit is reached

  Hello world!

  I'm new to JavaScript (4 days studying) and I'm doing a duplicated object until you press the edge of the artboard.

  What is a good way to do it?

  ---

  If (app.selection [0]! = null) {}

  var = app.activeDocument myDoc,

  selectedArt = myDoc.selection [0];

  limit =?, / / set the number of duplicates? how to stop when the limit of the artboard?

  horOffset = app.activeDocument.pathItems [0] .width + 34.016, / / set the horizontal offset: width of the selection + 12 mm

  myDuplicate,

  i = 0;

  for (i; i < limit; i ++) {}

  myDuplicate = selectedArt.duplicate ();

  myDuplicate.position = [selectedArt.position [0] + horOffset * (i + 1), selectedArt.position [1]];

  }

  }

  else {}

  Alert ("you must have the object you want to duplicate selected.");

  }

  ---

  I restored this code together to other scripts, but I'm stuck at the implementation of the edge of the artboard.

  I tried to use limit = app.activeDocument.width, but his does not work.

  Let me know if the question makes sense.

  All the tips are greatly appreciated. Thank you!

  Its not pretty, but it works!

  Not sure this will help someone that the task is very specific.

  I use this to prepare labels for printing on a roll of paper. The width of the graphic Board is limited by the width of the roll.

  The height limit is not important, because the configuration document is usually only 2 rows.

  Here is the code:

  --------------

  If (app.selection [0]! = null) {}

  move the object to the starting position

  app.activeDocument.pageItems [0] .position = [28.347,-11.338]

  Make duplicates horizontally

  var = app.activeDocument myDoc,

  selectedArt = myDoc.selection [0];

  limit = Math.floor ((app.activeDocument.width-56.688)/(app.activeDocument.selection[0].width+34.016)-1),

  horOffset = app.activeDocument.selection [0] .width + 34.016, / / set the horizontal offset: width of the selection + 12 mm

  myDuplicate,

  i = 0;

  for (i; I)< limit;="">

  myDuplicate = selectedArt.duplicate ();

  myDuplicate.position = [selectedArt.position [0] + horOffset * (i + 1), selectedArt.position [1]];

  }

  }

  Duplicates a line down

  If (app.documents.length > 0) {}

  docSelection = app.activeDocument.selection;

  If (docSelection.length > 0) {}

  newGroup = app.activeDocument.groupItems.add ();

  for (i = 0; i< docselection.length;="" i++="" )="">

  newItem = docSelection [i] .duplicate ();

  newItem.moveToBeginning (newGroup);

  newItem.top = newItem.top - newItem.height - 17.008;

  }

  }

  }

  else {}

  Alert ("you must have the object you want to duplicate selected.");

  }

  The funny thing is that I don't know why the duplication of a line to the bottom of work

  Also if the art is on the wrong layer, the object will not be moved to the correct starting point.

• Duplicate an object at a distance

  For the life of me, I don't remember what it is called or where to find in the menus.  It doesn't have the word "duplicate" in there, but it should!  You select an object and then switch to a dialog box and set up how many times you want to replicate vertically or horizontally and how far.

  I will certainly write this command down when the answer comes through, but I can tell you that he needs a name that sounds like what it is!

  Thank you!

  The transformation indeed in effect > warp and transformation > transform