DUPLICATE DATABASE to the < newserversid > TARGETS

Similar Questions

• what point of time duplicate database for the DORECOVER of the day BEFORE

  Hello
  Please specify at what point in time option DORECOVER will recover standby base 10.2.0.3
  -at the beginning of the moment of the order duplicate
  -so far as archivelog are provided?
  -Another option :)
  Kind regards.
  Greg

  If you do not specify an UNTIL clause, it attempts to RECOVER up to the most recent ArchiveLog generated by the Production database (target). He knows because he connects to the target instance as well. (10 g, you will need to connect to the target).
  DUPLICATE a DATABASE error during RECOVERY if the last archivelog has not been copied to the standby server.
  Therefore, it would be good to be
  a. copy the archivelogs from production to the waiting
  OR
  b. specify an UNTIL clause

  Hemant K Collette

• Problems with duplicate DATA when the data file was added after the backup completes

  Hello
  
  I am facing a problem when running of duplicate database with the command of database duplicate RMAN on a 10 g database. If I have the duplication from a full backup that is missing a data file that has been added to the database after the full backup of preforms, I get the following error message:
  

  Starting restore at 10-10-2009 18:00:38
  
  released channel: t1
  released channel: t2
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 10/10/2009 18:00:39
  RMAN-03015: error occurred in stored script Memory Script
  RMAN-06026: some targets not found - aborting restore
  RMAN-06100: no channel to restore a backup or copy of datafile 43

  Redo log which was Pond at the time of the creation of 43 of the data file is also available in the backups. It seems that RMAN cannot use the log information archived redo to restore the content of the data file 43. I guess that because failure is already reported in the RESTORATION and not in the RECOVERY phase, so again the archived logs are not available yet. I get the same message even if I do another backup of the data file 43 (so a backup that is not in the same backupset as the backup to all the other data files).
  The script, the command duplicate product, I guess that RMAN reads the contents of the source database controlfile and trying to get a backup that contains all the data files to restore the database Assistant - if such a backup is not found, it fails.
  
  
  Of course, if I try to perform a restore/recovery of the source database, it works without problem:
  

  RMAN> restore database;
  
  Starting restore at 13.10.09
  using target database control file instead of recovery catalog
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid=156 devtype=DISK
  
  creating datafile fno=43 name=F:\ORA10\ORADATA\SOVDEV\SOMEDATAFILE01.DBF
  channel ORA_DISK_1: starting datafile backupset restore
  channel ORA_DISK_1: specifying datafile(s) to restore from backup set
  restoring datafile 00001 to F:\ORA10\ORADATA\SOVDEV\SYSTEM01.DBF
  .....

  The 43 data file is re-created and then redo is applied to the course.
  
  So, does anyone know if the duplicate database can use archived redo logs to recreate the contents of a data file, as does a normal restore/recovery? If this is the case, then it is necessary to perform a full backup before each duplicated if a data file has been added after such a backup database.
  
  Thanks in advance for any answers.
  
  Kind regards
  Swear

  Hi swear,.

  I got exactly the same problem during replication.
  Because we backup archive logs every 6 hours with rman, I added an additional block of running this script.
  run
  {
  backup incremental level 0
  format "% d_ % s_ %%t p_ bk_ '.
  filesperset 4
  database not saved;
  }

  (I also hit a bug in the catalogue which was resolved by patching up the dbs catalog 11.1.0.6, 11.1.0.7 for.)

  This will restrict the data not making file not part of any backup rman 6 hours while jumping for which there is already a backup of data files.

  Kind regards

  Tycho

• Duplicate RMAN cloning using the database using the current database

  Hi all

  I am new bie, I want to clone my target database using the rman command 'DUPLICATE database OF ACTIVE DATABASE"new host.

  steps on google, I searched, but I got confused, I doubt if you need to install oracle rdbms softare on new host or not? and also should I copy all files (redo, control, datafiles) to the new host? kind LY help and tell me the steps to clone the database using rman.your help will be appreciated.

  Thank you.

  Kind regards.

  OS: RHEL 5.4

  DB: 11.2.0.3

  Hello

  Have you not through document link to Gavin at least. It's very simple steps. If you wait until other measures, then won't them.

  He had provided the demonstration, at least get in 'google' (you'll have so many links)

  The Oracle Dba Italian Blogger: how to clone an Oracle 11 g 2 home

  http://balaoracledba.com/2013/12/16/cloning-an-existing-Oracle11g-release-2-RDBMS-installation/

  Note: If you feel always complex, better skip the task itself.

  -Thank you

  Pavan Kumar N

• Duplicate database: ORA-19504: could not create the file "+ DATA1.

  Hi all

  I'm getting "ORA-19504: cannot create the file '+ DATA1' error when the active database duplication, no - ASM to ASM.» Source is 11.1.0.7 target is 11.2.0.1. Operating system is RHEL 5.5

  So far, I did as follows:

  created the password on the source and target file

  created source into the target and vice versa tns entries

  connectivity to test two-way

  set pfile on target with the following parameters:

  db_name

  = CLONE

  DB_FILES = 500

  log_file_name_convert ='/ oracle/TRN/db/apps_st/data /', "+ DATA1/database".

  db_unique_name = CLONE

  I use following command to reproduce:

  Run {}

  Configure auxname for datafile 1 to "+ DATA1;

  Configure auxname for datafile 2 to "+ DATA1;

  Configure auxname for datafile 3 to "+ DATA1;

  Configure auxname for datafile 4 to "+ DATA1;

  Configure auxname for datafile 5 to "+ DATA1;

  Configure auxname for datafile 6 to "+ DATA1;

  Configure auxname for datafile 7 to "+ DATA1;

  Configure auxname for datafile 8 to "+ DATA1;

  Configure auxname for datafile 9 to "+ DATA1;

  Configure auxname for datafile 10 to "+ DATA1;

  Configure auxname for datafile 11 in "+ DATA1;

  Configure auxname for datafile 12 to "+ DATA1;

  Configure auxname for datafile 13 to "+ DATA1;

  Configure auxname for datafile 14 to "+ DATA1;

  Configure auxname for datafile 15 to "+ DATA1;

  Configure auxname for datafile 16 to "+ DATA1;

  Configure auxname for datafile 17 to "+ DATA1;

  Configure auxname for datafile 18 to "+ DATA1;

  Configure auxname for datafile 19 to "+ DATA1;

  Configure auxname for datafile 20 to "+ DATA1;

  Configure auxname for datafile 288 to "+ DATA1;

  Configure auxname for datafile 295 to "+ DATA1;

  Configure auxname for datafile 314 to "+ DATA1;

  Configure auxname for datafile 351 to "+ DATA1;

  Configure auxname for datafile 352 to "+ DATA1;

  Configure auxname for datafile 353 to "+ DATA1;

  Configure auxname for datafile 354 to "+ DATA1;

  Configure auxname for datafile 379 to "+ DATA1;

  Configure auxname for datafile 392 to "+ DATA1;

  Configure auxname for datafile 393 to "+ DATA1;

  Configure auxname for datafile 394 to "+ DATA1;

  Configure auxname for datafile 395 to "+ DATA1;

  Configure auxname for datafile 396 to "+ DATA1;

  Configure auxname for datafile 397 to "+ DATA1;

  Configure auxname for datafile 398 to "+ DATA1;

  Configure auxname for datafile 399 to "+ DATA1;

  Configure auxname for datafile 400 to '+ DATA1;

  Configure auxname for datafile 401 to "+ DATA1;

  Configure auxname for datafile 402 to "+ DATA1;

  Configure auxname for datafile 403 to "+ DATA1;

  Configure auxname for datafile 404 to "+ DATA1;

  Configure auxname for datafile 405 to "+ DATA1;

  Configure auxname for datafile 406 to "+ DATA1;

  Configure auxname for datafile 407 to "+ DATA1;

  the value of newname for tempfile ' / oracle/TRN/db/apps_st/data/temp01.dbf' to '+ DATA1;

  the value of newname for tempfile ' / oracle/TRN/db/apps_st/data/temp02.dbf' to '+ DATA1;

  switch datafile;

  duplicate target database to "clone".

  active database

  pFile

  db_file_name_convert ='/ oracle/TRN/db/apps_st/data /', "+ DATA1;

  }

  Any ideas?

  Thank you

  Vinod

  A number of things.

  (1) If you're going to go to a different version of oracle, then duplicate only is not supported.

  (2) assuming that the target and the auxiliary of the versions of database is the same, you don't need all your configure auxname, set the datafile newname and switch controls.

• RMAN-04014: failed to start: ORA-00600 during the duplicate database

  Hello
  
  Oracle version: 11.2.0.2
  
  OS: linux rhel 5
  
  I do duplicate database of active database
  

  rman target sys/*******@pindb AUXILIARY sys/*****@test
  
  Recovery Manager: Release 11.2.0.2.0 - Production on Mon Nov 26 19:56:41 2012
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: pindb (DBID=4116200880)
  connected to auxiliary database: TEST (not mounted)
  
  RMAN> run {
  allocate channel C1 type disk;
  allocate auxiliary channel DUP type disk;
  DUPLICATE TARGET DATABASE  TO 'TEST' FROM ACTIVE DATABASE  DB_FILE_NAME_CONVERT '/oradata/pindb','/oradata/test';
  }2> 3> 4> 5>
  
  using target database control file instead of recovery catalog
  allocated channel: C1
  channel C1: SID=699 device type=DISK
  
  allocated channel: DUP
  channel DUP: SID=5 device type=DISK
  
  Starting Duplicate Db at 26-NOV-12
  
  contents of Memory Script:
  {
     sql clone "create spfile from memory";
  }
  executing Memory Script
  
  sql statement: create spfile from memory
  
  contents of Memory Script:
  {
     shutdown clone immediate;
     startup clone nomount;
  }
  executing Memory Script
  
  Oracle instance shut down
  
  connected to auxiliary database (not started)
  released channel: C1
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 11/26/2012 19:57:07
  RMAN-06403: could not obtain a fully authorized session
  RMAN-04006: error from auxiliary database: ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  Linux-x86_64 Error: 2: No such file or directory
  RMAN-03015: error occurred in stored script Memory Script
  RMAN-04014: startup failed: ORA-00600: internal error code, arguments: [kck_rls_check must use (11,0,0,0,0) or lower], [kdt.c], [9576], [11.2.0.2.0], [], [], [], [], [], [], [], []
  RMAN-04017: startup error description: ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance

  Please can someone offer
  
  Thank you

  Hello;

  In my view, that it is a bug that has to do with the compatibility of the compression.

  I think that work around is:

  alter system  set "_compression_compatibility"="11.2.0";
  

  Let me confirm with a document number of MOS

  Subsequently Cannot find the doc of MOS - this has some details:

  http://www.acehints.com/2011/11/fix-RMAN-duplicate-database-failed-ora.html

  http://bryangrenn.blogspot.com/2011/12/ora-600-kckrlscheck-must-use-110000-or.html

  Best regards

  mseberg

  Published by: mseberg on November 26, 2012 16:07

• What / which method to use for the duplicate database

  Greetings, the Experts of Oracle
  
  I'm trying to replicate a database (src) of production to another machine (dest) for developers to do some tests before applying the changes to the production environment. The src and dest running Oracle 10 g 2 RHEL 4, 5.
  
  Due to the firewall in our environment policy, may that src and dest will not be able to see each other on the network. Also the directory structure will be different on src and dest.
  
  Now, there seems to be several methods available to achieve this:
  1. duplicate with RMAN, something like:

  rman TARGET sys/password@src NOCATALOG AUXILIARY sys/password@dest
  DUPLICATE TARGET DATABASE TO dest NOFILENAMECHECK;

  2. backup/restore with RMAN.
  3 use the Import and Export (including impdp/expdp) utilities.
  
  From my research so far, option 1 seems to be the method for this purpose. He also manages the directory structure difference quite well. However, it requires connection to src and dest simultaneously during replication. Is there a way it could be done from a backup image instead of a connection to the database of the CBC? Other 2 options are possible? Are there any other ways I could duplicate the database given the situation?
  
  Appreciate your help.

  If the CBC and destination cannot access another, then the simplest option will be #2 (restore a database to a new host: scenario) who also address the different directory structure.

• Do we need the intermediate database if a single execution in real-time duplicate controls with the connector for Siebel Disqualification?

  Still confused:

  Do we need a staging database? We want only to perform real-time duplicate checks.

  Documentation (Guide to integration of Siebel, Oracle® Enterprise Data quality customer Data Service Pack, Version 9.0, April 2013) is not quite clear about this:

  "The staging database is used by the Siebel connector as a staging area for the transfer of data between Siebel and Disqualification when running batch through Data Quality Manager of Siebel." (p. 19)
  

  "The interface in real time of the Disqualification is also used for the batch cleaning tasks (normalization): Siebel sends each record selected for treatment to the Disqualification by batch cleaning web services." (p. 6)
  

  «Double the lot identification and quality of data health check jobs (either full or incremental batch) use interface batch Disqualification.» In this case, the candidate registers for correspondence or health checkups are written to the database shared staging, Disqualification executes a batch on these records and - if pairing - rewritten matches, Siebel picks up and uses to link together the records. "(p. 6)

  
  

  However, for a design it is necessary to plan in advance, if a database is required or not.

  Any suggestions?

  Hello

  The staging database is used only for temporary storage where the interface between Siebel and Disqualification batch is used. It is not necessary at all if only using the interface in real time. Note that some of the 'batch' in Siebel tasks actually use the interface in real time - this applies to all data in batch cleaning jobs in Siebel and also for the workflow "UCM lot" which is in fact orchestrated by calling web services Disqualification.

  In general, the batch interface is only used where Disqualification is attached to Siebel CRM (instead of UCM). Because DQ Siebel lots do not call survival (so that you can only link to potential duplicates together).

  Note that the tables key used for the selection of the candidates belong to the Siebel database in the form of standard tables (S_DQ_CON_KEY and S_DQ_ACC_KEY). They are not in the database shared staging. The staging database is used ONLY for the data transfer for treatment in batches. It seems that you are not intending to use this interface.

  Also note that Disqualification still needs its own repository database, but if you use only a Disqualification in real-time (and not, for example, by using a Disqualification to batch migrate data in Siebel using the interface of the EIM), it should probably not push the database this hard.

  Kind regards

  Mike

• EM12C - add repoitory database as the target of the database

  Hi all

  My apologies if this sounds like a stupid question.

  I just installed EM12C SGD and database repository on the same server (Linux x86_64). The installation is successful and I can access the control of cloud and see targets preconfigured (from the same host).

  However, I am not able to add the database reporitory as the target of the database. Should it? I remember in the 10g grid control, I was able to configure the database reporitory as a target database.

  12 c, I tried "Add manually targets" or "auto-discovery", but none of them show either the database repository or ist listener as target.

  Thanks in advance.

  p.s. I added also successfully 12 c as part of the installation of EM12c agent and the agent is running correctly on the host computer.

  You can use emcli add_target

  Check this metalink note:

  Understanding of database in Enterprise Manager 12 c Cloud Control (Doc ID 1400463.1)

• Data synchronization after restoring the database to the Source or target

  Hi DBAs,
  
  I've implemented replication unidirectional flow at the level of transactional database to the database schema (excluding some tables). It works very well without any problems after doing the tuning of flow with the help of health check scripts. My question is if some reasons, if I have to recover to the level of the database on the database Source then I need rebuild flows from scratch? Database size is close to 2 TB and after recovery, even using the pump data at the same time, it could take hours and also the source won't be available even after the recovery (data pump running job - if the source is online, then I was getting ORA-01555 errors and work was not).
  
  Please notify by above circumstances what is the best way to re - synchronize data between the source and target.
  
  Thank you
  -Samar-

  I would export of the datadict (build) once again, just to avoid any MVDD, something to do directly after the restoration of the DB,.
  because I'm not sure from the perception of this restoration DB in terms of DBID. Have you checked in rman if source db is considered to be the epitome?

  Then restart what are the messages in the target error queues. I think that you will have problems to move the first_scn
  due to differences on some YVERT in source/target system.logmnr_restart_ckpt$. system will think it has holes.
  You may need to manually remove a bunch of lines to allow the flow to jump on the fate of the YVERT
  that have been sent and are not present in the source system.logmnr_restart_ckpt$

• Can us refresh database using the recovery catalog?

  Hi all, I need update the dev of database using the prod database backup, we have TSM server and database of separate catalog for storing backups. No, my doubt is, we can update database dev using catalog, which has the backup of all info the prod

  In my previous organization, we used to copy the backup of the prod dev we restore and recover it in dev db. But in this organization, we have a TSM server that stores all backups of prod and dev.

  Please tell me we can update dev db using info catalogue simply and without copying backups of prod? If possible how?

  Thank you

  Harish

  user8596912 wrote:

  Yes I know that the content of the rman script.

  But we have not, so how can we be expected to comment on?

  My question is that the connection to the rman is good or bad?

  It would depend on the content of the script you do not think that we need to see.

  In the end, you can determine whether this is good or bad by testing.

  Because the rman is not connected directly to the target db prod.

  Have you read the link I gave you?

  I would limit for you: a database mirroring

  The docs in detail how to duplicate a database

  1 - active database

  2 - from a backup WITH a connection target (the database prod)

  3. from a backup WITHOUT a connection target (the database prod) but WITH a recovery catalog connection

  4 - from a backup WITHOUT connection AND connection catalog recovery target (the database prod)

  BTW, why you score your own messages as 'useful' to your own problem?

• Duplicate database failed

  I'm on 11.2.0.2 dataguard configuration. Prepared the backup of database init.ora file. Configure the network. I am trying to use Rman to connect to the primary to the standby server, and then run the command duplicate.
  
  
  
  [oracle@stby]$ rman target sys/oracle@test1 auxiliary sys/oracle@test2]
  Recovery Manager: release 11.2.0.2.0 - Production on Fri 3 Feb 15:38:56 2010
  Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
  connected to target database: test1 (DBID = 1784854517)
  connected to the auxiliary database: test1 (unassembled)
  RMAN > run {}
  2 > allocate channel test11 type disk;
  3 > allocate auxiliary channel test2 type disk;
  4 > duplicate target database for the eve of the active database
  5 >;
  {6 >}
  using the control file of the target instead of recovery catalog database
  allocated channel: test1
  channel test1: SID = 37 type device = DISK
  
  allocated channel: test2
  test2 channel: SID = 391 type device = DISK
  
  From Db double 4 February 12
  content of Script memory:
  {
  backup that copy reuse
  TargetFile "/ oracle/11 GR 2/dbs/orapwtest1" auxiliary format
  ' / oracle/11 GR 2/dbs/orapwtest2 ";
  }
  execution of Script memory
  From backup 4 February 12
  output channel: test1
  output channel: test2
  RMAN-00571: =.
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: =.
  RMAN-03002: failure of Db in dual at 04/02/2012 00:00:00
  RMAN-05501: abandonment of duplicate target database
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of the backup command on channel test1 to the 04/02/2012 00:00:00
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-12528: TNS: listener: all appropriate instances are blocking new connections
  ORA-17629: unable to connect to the remote database server
  
  
  Because my expectation is in nomount mode, the status of the listener is blocked. Therefore, it is impossible to connect to standby mode. The server of remote database in the error message refers to the waiting?

  I guess the answer was useful ;)

• RMAN duplicate database RAC w/ASM to stand alone without ASM fails

  Trying to duplicate database in order to upgrade to 11.2 and migrate from Windows to Solaris with minimal downtime, using GoldenGate. The source database is 11.1.0.7 on Windows 2003 x 64 a 2 RAC node. The auxiliary database is 11.1.0.7 on a single Windows 2003 x 64 server. The steps to reach where the error has occurred are:
  
  1 created auxiliary instance on remote node. creating oradim and the listener.
  
  2 copied password for the remote node target file and put it in the directory %ORACLE_HOME%\database and % ORACLE_HOME%\dbs.
  
  3 created PFILE in %ORACLE_HOME%\database and copied to %ORACLE_HOME%\dbs just in case.
  
  db_name = "UTILAX".
  instance_name = UTILAX
  diagnostic_dest = a: \oracle\admin\utilax'
  db_file_name_convert =('+Data/util','D:\oracle\oradata\utilax')
  log_file_name_convert =('+Data/util','D:\oracle\log\utilax')
  SGA_TARGET = 5g
  control_files=D:\oracle\oradata\utilax\control01.dbf
  compatible = '11.1.0'
  
  4 Startup nomount performed.
  
  5. backup Ran full on the head node to the D drive and outside the DSO.
  
  rman target % = / catalog=rman/password@RMAN
  
  RMAN > run {}
  allocate channel d1 type disk;
  database backup in format "D:\backups\df_t%t_s%s_p%p".
  SQL 'alter system archive log current';
  backup format 'D:\backups\al_t%t_s%s_p%p' archivelog all;
  output channel d1;
  }
  
  6 copied only the manual backup (22 GB) to the remote host files in the same directory on the D drive. D:\backups same folder on both servers.
  
  7. connected with rman, target, catalog and auxiliary databases. A run the rman command to duplicate the database on the target instance.
  
  DUPLICATE THE TARGET DATABASE TO 'UTILAX' IN THE CURRENT DATABASE.
  
  Errors received
  RMAN-03009: failure of the backup on the channel ORA_DISK_1 command
  ORA-17628: error Oracle 19505 returned by remote Oracle Server
  
  8. looked in the auxiliary database alerts log. Errors found:
  ORA-19505: impossible to identify the file 'D:\ORACLE\ORADATA\UTILAX\DATAFILE\SYSTEM.327.716381457 '.
  ORA-27040: create file error, cannot create the file
  04002 - OSD: could not open the file
  S/O-error: (OS 3) the system cannot find the path specified
  
  9 creates all directories to the path and try again. Same mistakes.
  
  
  Must miss one or two steps but document metalink 382269.1 followed as closely as possible. Sorry for the lack of screenshots but databases are private networks. Someone who did that regularly offer any help?
  
  Thank you

  Since you have already made the backup and copied to the auxiliary server, why use again 'data base active'

  DUPLICATE THE TARGET DATABASE TO 'UTILAX' IN THE CURRENT DATABASE.

  Just try to DUPLICATE the DATABASE to 'UTILAX' TARGET nofilenamecheck;

  This would work out.

  or if you want to continue to make use of the active database functionality, then

  DUPLICATE TARGETS DATABASE to the 'UTILAX' of the active database nofilenamecheck.

  Published by: srp on December 28, 2011 12:24 AM

• duplicate database

  Hi all
  
  _ While I was trying to test the database duplicate, I found this error
  
  [oracle@amila ~] $ export ORACLE_SID = dup
  [oracle@amila ~] $ rman target sys/oracle@orcl auxiliary.
  
  Recovery Manager: release 11.2.0.1.0 - Production Thu Jun 2 16:30:55 2011
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
  
  connected to target database: ORCL (DBID = 1279684735)
  connected to the auxiliary database: DUP (unassembled)
  
  RMAN > duplicate target database to the dup
  2 > active database
  3 > spfile;
  
  From duplicate Db 2 June 11
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 02/06/2011 16:33:31
  RMAN-06217: not connected to an auxiliary database with a network service name
  
  RMAN > exit
  
  
  Complete recovery manager.
  [oracle@amila ~] $
  [oracle@amila ~] $ rman target sys/oracle@orcl auxiliary /@dup
  
  11.2.0.1.0 - production on Thu Jun 2 of Recovery Manager: release 16:34:16 2011
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
  
  connected to target database: ORCL (DBID = 1279684735)
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00554: initialization of the package manager internal collection failed
  RMAN-04006: auxiliary database error: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
  [oracle@amila ~] $
  
  _ And I have the following, as well
  
  [oracle@amila ~] $ lsnrctl status
  
  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on June 2, 2011 16:48:25
  
  Copyright (c) 1991, 2009, Oracle. All rights reserved.
  
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
  Start date June 2, 2011 07:06:26
  Uptime 0 days 9 h 41 min 59 s
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /u01/app/grid/product/11.2.0/grid/network/admin/listener.ora file
  The listener log file /U01/app/grid/diag/tnslsnr/AMILA/listener/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=amila.swt.lk) (PORT = 1521)))
  Summary of services...
  Service '+ ASM' a 1 instance (s).
  Instance '+ ASM' READY State, has 1 operation for this service...
  Service 'catdb.amila.swt.lk' has 1 instance (s).
  Instance "catdb' READY State, has 1 operation for this service...
  'Dup' service has 1 instance (s).
  Instance "dup", LOCKEDstatus, has 1 operation for this service...
  Service 'orcl.amila.swt.lk' has 1 instance (s).
  Instance "orcl", State LOAN, has 1 operation for this service...
  Service 'orclXDB.amila.swt.lk' has 1 instance (s).
  Instance "orcl", State LOAN, has 1 operation for this service...
  Service 'test.amila.swt.lk' has 1 instance (s).
  Instance of 'test', State LOAN, has 1 operation for this service...
  The command completed successfully
  [oracle@amila ~] $
  [oracle@amila ~] $ tnsping dup
  
  AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on June 2, 2011 17:03:44
  
  Copyright (c) 1997, 2009, Oracle. All rights reserved.
  
  Use settings files:
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = amila.swt.lk) (PORT = 1521))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = dup)))
  OK (0 msec)
  
  _ And the tnsnames.ora has these lines as well
  
  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
  # Generated by Oracle configuration tools.
  
  DUP =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = amila.swt.lk) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = dup)
  )
  )
  
  Could someone advise me on this subject please_

  First cannot connect to the only auxiliary database, let us know you are able to connect or not

  sqlplus sys/***@dup as sysdba

  &

  RMAN target sys/***@dup

  post any errors

• Roll forward standby database with the incremental backup, when a data file is deleted in primary education

  Hello

  I'm nologging operations + deleting some files in the primary and you want to roll forward the day before using the incremental backup Yvert.

  I do in particular, as the files are dropped?

  I got to meet ( Doc ID 1531031.1 ) which explains how to roll forward when a data file is added.

  If I follow the same steps, to make the move to restore the data file newly added, will it work in my case?

  Can someone please clarify?

  Thank you

  San

  I was wondering if reocover noredo is performed before restored controlfile, oracle will apply the incremental backup error-free files, and in this case, what would be the status of the data file in the control file.

  Why do you consider to retrieve the day before first and then in the restaurant of the controlfile will lead to problems. Please read my first post on this thread - I had clearly mentioned that you would not face problems if you go with the method of deployment.

  Here is a demo for you with force logging is disabled. For the first time the day before resuming and restored then the controlfile ensures:

  Primary: oraprim

  Standby: orastb

  Tablespace DataFile of MYTS is removed on primary:

  SYS @ oraprim > select force_logging in the database of v$.

  FORCE_LOGGING

  ---------------------------------------

  NO.

  Currently the tablespace is to have 2 data files.

  SYS @ oraprim > select file_name in dba_data_files where nom_tablespace = 'MYTS;

  FILE_NAME

  -------------------------------------------------------

  /U01/app/Oracle/oradata/oraprim/myts01.dbf

  /U01/app/Oracle/oradata/oraprim/myts02.dbf

  In standby mode, the tablespace is to have 2 data files:

  SYS @ orastb > select name from v$ datafile where ts #= 6;

  NAME

  --------------------------------------------------------------------------------

  /U01/app/Oracle/oradata/orastb/myts01.dbf

  /U01/app/Oracle/oradata/orastb/myts02.dbf

  Postponement of the day before on the primary log shipping

  SYS @ oraprim > alter system set log_archive_dest_state_3 = delay;

  Modified system.

  Dropped 1 MYTS datafile on the primary.

  SYS @ oraprim > alter tablespace myts drop datafile ' / u01/app/oracle/oradata/oraprim/myts02.dbf';

  Tablespace altered.

  Removed some archives to create a space.

  [oracle@ora12c-1 2016_01_05] $ rm - rf * 31 *.

  [oracle@ora12c-1 2016_01_05] $ ls - lrt

  13696 total

  -rw - r - 1 oracle oinstall 10534400 5 January 18:46 o1_mf_1_302_c8qjl3t7_.arc

  -rw - r - 1 oracle oinstall 2714624 5 January 18:47 o1_mf_1_303_c8qjmhpq_.arc

  -rw - r - 1 oracle oinstall 526336 5 January 18:49 o1_mf_1_304_c8qjp7sb_.arc

  -rw - r - 1 oracle oinstall 23552 5 January 18:49 o1_mf_1_305_c8qjpsmh_.arc

  -rw - r - 1 oracle oinstall 53760 5 January 18:50 o1_mf_1_306_c8qjsfqo_.arc

  -rw - r - 1 oracle oinstall 14336 Jan 5 18:51 o1_mf_1_307_c8qjt9rh_.arc

  -rw - r - 1 oracle oinstall 1024 5 January 18:53 o1_mf_1_309_c8qjxt4z_.arc

  -rw - r - 1 oracle oinstall 110592 5 January 18:53 o1_mf_1_308_c8qjxt34_.arc

  [oracle@ora12c-1 2016_01_05] $

  Current main MYTS data files:

  SYS @ oraprim > select file_name in dba_data_files where nom_tablespace = 'MYTS;

  FILE_NAME

  -------------------------------------------------------

  /U01/app/Oracle/oradata/oraprim/myts01.dbf

  Current data of MYTS standby files:

  SYS @ orastb > select name from v$ datafile where ts #= 6;

  NAME

  --------------------------------------------------------------------------------

  /U01/app/Oracle/oradata/orastb/myts01.dbf

  /U01/app/Oracle/oradata/orastb/myts02.dbf

  Gap is created:

  SYS @ orastb > select the process, status, sequence # v$ managed_standby;

  STATUS OF PROCESS SEQUENCE #.

  --------- ------------ ----------

  ARCH. CLOSING 319

  ARCH. CLOSING 311

  CONNECTED ARCH 0

  ARCH. CLOSING 310

  MRP0 WAIT_FOR_GAP 312

  RFS IDLE 0

  RFS IDLE 0

  RFS IDLE 0

  RFS IDLE 320

  9 selected lines.

  Backup incremental RMAN is taken elementary school.

  RMAN > incremental backup of the format of database of SNA 2686263 ' / u02/bkp/%d_inc_%U.bak';

  From backup 5 January 16

  using the control file of the target instead of recovery catalog database

  the DISC 2 channel configuration is ignored

  the DISC 3 channel configuration is ignored

  configuration for DISK 4 channel is ignored

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 41 type device = DISK

  channel ORA_DISK_1: starting full datafile from backup set

  channel ORA_DISK_1: specifying datafile (s) in the backup set

  Enter a number of file datafile = 00001 name=/u01/app/oracle/oradata/oraprim/system01.dbf

  Enter a number of file datafile = name=/u01/app/oracle/oradata/oraprim/sysaux01.dbf 00003

  Enter a number of file datafile = name=/u01/app/oracle/oradata/oraprim/undotbs01.dbf 00004

  Enter a number of file datafile = name=/u01/app/oracle/oradata/oraprim/users01.dbf 00006

  Enter a number of file datafile = name=/u01/app/oracle/oradata/oraprim/myts01.dbf 00057

  channel ORA_DISK_1: starting total, 1-January 5, 16

  channel ORA_DISK_1: finished piece 1-January 5, 16

  piece handle=/u02/bkp/ORAPRIM_inc_42qqkmaq_1_1.bak tag = TAG20160105T190016 comment = NONE

  channel ORA_DISK_1: complete set of backups, time: 00:00:02

  Backup finished on 5 January 16

  Saved controlfile on primary:

  RMAN > backup current controlfile to Eve format ' / u02/bkp/ctl.ctl';

  Cancel recovery in standby mode:

  SYS @ orastb > alter database recover managed standby database cancel;

  Database altered.

  Recover the day before by using the above backup items

  RMAN > recover database noredo;

  From pick up to 5 January 16

  the DISC 2 channel configuration is ignored

  the DISC 3 channel configuration is ignored

  configuration for DISK 4 channel is ignored

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 26 type of device = DISK

  channel ORA_DISK_1: from additional data file from the restore backup set

  channel ORA_DISK_1: specifying datafile (s) to restore from backup set

  destination for the restoration of the data file 00001: /u01/app/oracle/oradata/orastb/system01.dbf

  destination for the restoration of the data file 00003: /u01/app/oracle/oradata/orastb/sysaux01.dbf

  destination for the restoration of the data file 00004: /u01/app/oracle/oradata/orastb/undotbs01.dbf

  destination for the restoration of the data file 00006: /u01/app/oracle/oradata/orastb/users01.dbf

  destination for the restoration of the data file 00057: /u01/app/oracle/oradata/orastb/myts01.dbf

  channel ORA_DISK_1: backup /u02/bkp/ORAPRIM_inc_3uqqkma0_1_1.bak piece reading

  channel ORA_DISK_1: room handle=/u02/bkp/ORAPRIM_inc_3uqqkma0_1_1.bak tag = TAG20160105T190016

  channel ORA_DISK_1: restored the backup part 1

  channel ORA_DISK_1: restore complete, duration: 00:00:01

  Finished recover to 5 January 16

  Restored the controlfile and mounted the day before:

  RMAN > shutdown immediate

  dismounted database

  Instance Oracle to close

  RMAN > startup nomount

  connected to the database target (not started)

  Oracle instance started

  Total System Global Area 939495424 bytes

  Bytes of size 2295080 fixed

  348130008 variable size bytes

  583008256 of database buffers bytes

  Redo buffers 6062080 bytes

  RMAN > restore controlfile eve of ' / u02/ctl.ctl ';

  From 5 January 16 restore

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 20 type of device = DISK

  channel ORA_DISK_1: restore the control file

  channel ORA_DISK_1: restore complete, duration: 00:00:01

  output file name=/u01/app/oracle/oradata/orastb/control01.ctl

  output file name=/u01/app/oracle/fast_recovery_area/orastb/control02.ctl

  Finished restore at 5 January 16

  RMAN > change the editing of the database;

  Statement processed

  output channel: ORA_DISK_1

  Now the data file does not exist on the standby mode:

  SYS @ orastb > alter database recover managed standby database disconnect;

  Database altered.

  SYS @ orastb > select the process, status, sequence # v$ managed_standby;

  STATUS OF PROCESS SEQUENCE #.

  --------- ------------ ----------

  CONNECTED ARCH 0

  CONNECTED ARCH 0

  CONNECTED ARCH 0

  ARCH. CLOSING 329

  RFS IDLE 0

  RFS IDLE 330

  RFS IDLE 0

  MRP0 APPLYING_LOG 330

  8 selected lines.

  SYS @ orastb > select name from v$ datafile where ts #= 6;

  NAME

  --------------------------------------------------------------------------------

  /U01/app/Oracle/oradata/orastb/myts01.dbf

  Hope that gives you a clear picture. You can use this to roll forward day before using the SNA roll forward Eve physical database using RMAN incremental backup | Shivananda Rao

  -Jonathan Rolland