Duplicate database failed
I'm on 11.2.0.2 dataguard configuration. Prepared the backup of database init.ora file. Configure the network. I am trying to use Rman to connect to the primary to the standby server, and then run the command duplicate.[oracle@stby]$ rman target sys/oracle@test1 auxiliary sys/oracle@test2]
Recovery Manager: release 11.2.0.2.0 - Production on Fri 3 Feb 15:38:56 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: test1 (DBID = 1784854517)
connected to the auxiliary database: test1 (unassembled)
RMAN > run {}
2 > allocate channel test11 type disk;
3 > allocate auxiliary channel test2 type disk;
4 > duplicate target database for the eve of the active database
5 >;
{6 >}
using the control file of the target instead of recovery catalog database
allocated channel: test1
channel test1: SID = 37 type device = DISK
allocated channel: test2
test2 channel: SID = 391 type device = DISK
From Db double 4 February 12
content of Script memory:
{
backup that copy reuse
TargetFile "/ oracle/11 GR 2/dbs/orapwtest1" auxiliary format
' / oracle/11 GR 2/dbs/orapwtest2 ";
}
execution of Script memory
From backup 4 February 12
output channel: test1
output channel: test2
RMAN-00571: =.
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: =.
RMAN-03002: failure of Db in dual at 04/02/2012 00:00:00
RMAN-05501: abandonment of duplicate target database
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-03009: failure of the backup command on channel test1 to the 04/02/2012 00:00:00
ORA-17629: unable to connect to the remote database server
ORA-17627: ORA-12528: TNS: listener: all appropriate instances are blocking new connections
ORA-17629: unable to connect to the remote database server
Because my expectation is in nomount mode, the status of the listener is blocked. Therefore, it is impossible to connect to standby mode. The server of remote database in the error message refers to the waiting?
I guess the answer was useful ;)
Tags: Database
Similar Questions
-
RMAN-04014: failed to start: ORA-00600 during the duplicate database
Hello
Oracle version: 11.2.0.2
OS: linux rhel 5
I do duplicate database of active database
Please can someone offerrman target sys/*******@pindb AUXILIARY sys/*****@test Recovery Manager: Release 11.2.0.2.0 - Production on Mon Nov 26 19:56:41 2012 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. connected to target database: pindb (DBID=4116200880) connected to auxiliary database: TEST (not mounted) RMAN> run { allocate channel C1 type disk; allocate auxiliary channel DUP type disk; DUPLICATE TARGET DATABASE TO 'TEST' FROM ACTIVE DATABASE DB_FILE_NAME_CONVERT '/oradata/pindb','/oradata/test'; }2> 3> 4> 5> using target database control file instead of recovery catalog allocated channel: C1 channel C1: SID=699 device type=DISK allocated channel: DUP channel DUP: SID=5 device type=DISK Starting Duplicate Db at 26-NOV-12 contents of Memory Script: { sql clone "create spfile from memory"; } executing Memory Script sql statement: create spfile from memory contents of Memory Script: { shutdown clone immediate; startup clone nomount; } executing Memory Script Oracle instance shut down connected to auxiliary database (not started) released channel: C1 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of Duplicate Db command at 11/26/2012 19:57:07 RMAN-06403: could not obtain a fully authorized session RMAN-04006: error from auxiliary database: ORA-01034: ORACLE not available ORA-27101: shared memory realm does not exist Linux-x86_64 Error: 2: No such file or directory RMAN-03015: error occurred in stored script Memory Script RMAN-04014: startup failed: ORA-00600: internal error code, arguments: [kck_rls_check must use (11,0,0,0,0) or lower], [kdt.c], [9576], [11.2.0.2.0], [], [], [], [], [], [], [], [] RMAN-04017: startup error description: ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
Thank youHello;
In my view, that it is a bug that has to do with the compatibility of the compression.
I think that work around is:
alter system set "_compression_compatibility"="11.2.0";
Let me confirm with a document number of MOS
Subsequently Cannot find the doc of MOS - this has some details:
http://www.acehints.com/2011/11/fix-RMAN-duplicate-database-failed-ora.html
http://bryangrenn.blogspot.com/2011/12/ora-600-kckrlscheck-must-use-110000-or.html
Best regards
mseberg
Published by: mseberg on November 26, 2012 16:07
-
RMAN duplicate database RAC w/ASM to stand alone without ASM fails
Trying to duplicate database in order to upgrade to 11.2 and migrate from Windows to Solaris with minimal downtime, using GoldenGate. The source database is 11.1.0.7 on Windows 2003 x 64 a 2 RAC node. The auxiliary database is 11.1.0.7 on a single Windows 2003 x 64 server. The steps to reach where the error has occurred are:
1 created auxiliary instance on remote node. creating oradim and the listener.
2 copied password for the remote node target file and put it in the directory %ORACLE_HOME%\database and % ORACLE_HOME%\dbs.
3 created PFILE in %ORACLE_HOME%\database and copied to %ORACLE_HOME%\dbs just in case.
db_name = "UTILAX".
instance_name = UTILAX
diagnostic_dest = a: \oracle\admin\utilax'
db_file_name_convert =('+Data/util','D:\oracle\oradata\utilax')
log_file_name_convert =('+Data/util','D:\oracle\log\utilax')
SGA_TARGET = 5g
control_files=D:\oracle\oradata\utilax\control01.dbf
compatible = '11.1.0'
4 Startup nomount performed.
5. backup Ran full on the head node to the D drive and outside the DSO.
rman target % = / catalog=rman/password@RMAN
RMAN > run {}
allocate channel d1 type disk;
database backup in format "D:\backups\df_t%t_s%s_p%p".
SQL 'alter system archive log current';
backup format 'D:\backups\al_t%t_s%s_p%p' archivelog all;
output channel d1;
}
6 copied only the manual backup (22 GB) to the remote host files in the same directory on the D drive. D:\backups same folder on both servers.
7. connected with rman, target, catalog and auxiliary databases. A run the rman command to duplicate the database on the target instance.
DUPLICATE THE TARGET DATABASE TO 'UTILAX' IN THE CURRENT DATABASE.
Errors received
RMAN-03009: failure of the backup on the channel ORA_DISK_1 command
ORA-17628: error Oracle 19505 returned by remote Oracle Server
8. looked in the auxiliary database alerts log. Errors found:
ORA-19505: impossible to identify the file 'D:\ORACLE\ORADATA\UTILAX\DATAFILE\SYSTEM.327.716381457 '.
ORA-27040: create file error, cannot create the file
04002 - OSD: could not open the file
S/O-error: (OS 3) the system cannot find the path specified
9 creates all directories to the path and try again. Same mistakes.
Must miss one or two steps but document metalink 382269.1 followed as closely as possible. Sorry for the lack of screenshots but databases are private networks. Someone who did that regularly offer any help?
Thank youSince you have already made the backup and copied to the auxiliary server, why use again 'data base active'
DUPLICATE THE TARGET DATABASE TO 'UTILAX' IN THE CURRENT DATABASE.
Just try to DUPLICATE the DATABASE to 'UTILAX' TARGET nofilenamecheck;
This would work out.
or if you want to continue to make use of the active database functionality, then
DUPLICATE TARGETS DATABASE to the 'UTILAX' of the active database nofilenamecheck.
Published by: srp on December 28, 2011 12:24 AM
-
Create the database fails with error ORA-01505: Error adding log files
Hi all
hope someone can help out me, I'm creating a database by using a SQL script, the content of the script is:
create the testora database
the user sys identified by oracle
the user identified by oracle's system
LogFile Group 1 ('/ u01/app/oracle/oradata/testora/redo01a.log ',' / u02/app/oracle/oradata/testora/redo01b.log') blocksize 512 re-use, 100 m in size.
Group 2 ('/ u01/app/oracle/oradata/testora/redo02a.log ',' / u02/app/oracle/oradata/testora/redo02b.log') blocksize 512 re-use, 100 m in size.
Group 3 ('/ u01/app/oracle/oradata/testora/redo03a.log ',' / u02/app/oracle/oradata/testora/redo03b.log') blocksize 512 re-use, 100 m in size.
maxLogFiles 5
maxlogmembers 5
MAXDATAFILES 100
US7ASCII character set
AL16UTF16 national character set
Local extended management
DataFile ' / u01/app/oracle/oradata/testora/system01.dbf' re-use of 400 m size
SYSAUX datafile ' / u01/app/oracle/oradata/testora/sysaux01.dbf' re-use of 400 m size
default tablespace users
DataFile ' / u02/app/oracle/oradata/testora/users01.dbf' size 500 m reuse autoextend on maxsize unlimited
default temporary tablespace tempts1
tempfile ' / u01/app/oracle/oradata/testora/temp01.dbf' size 20 m reuse autoextend on maxsize 4g
Undo tablespace undotbs1
DataFile ' / u01/app/oracle/oradata/testora/undotbs01.dbf' size 200 m reuse autoextend on maxsize unlimited
;
It fails in the creation of the database with the following result:
SQL > @/home/oracle/Oracle_Scripts/testora_db_script.sql
create the testora database
*
ERROR on line 1:
ORA-01092: ORACLE instance is complete. Disconnection forced
ORA-01501: CREATE DATABASE failed
ORA-01505: Error adding log files
ORA-01184: logfile group 1 already exists
Process ID: 3486
ID of the session: 1 serial number: 3This is the documentation: http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_5004.htm#i2142335
>
If only the DB_RECOVERY_FILE_DEST initialization parameter is specified, Oracle database then creates a log file member to this place. -
RMAN DUPLICATE DATABASE RESULT IN A RE - ORG
Database Version 10.2.0.4
When I perform a duplicate database RMAN is the new database completely reorganized? The new database can be any fragmentation or water marks high if the source database has done?
Thank youThe answer to your question is no duplicate RMAN does not cause a re - org, RMAN is a block of files of database level backup, RMAN duplicate is a double level of a data block. Therefore, duplicate RMAN is fundamentally a restoration of the source database, because it is in another location and an instance of the database and the database name change.
-
Duplicate target database failed with the newspaper missing in the CCR
Hi all
I'm duplicating a database of node 2 CARS to the test environment.
I took archivelog and pending full database backup in the database. dB Dimensions 950 g.
I restored it to test the environment but get error during recovery
operating system: aix 7.1
version of DB: oracle 10g
I ran the following command to launch two copies
RMAN > run
2 > {}
3 > allocate auxiliary channel ch1 type disk;
4 > allocate auxiliary channel ch2 type disk;
5 > allocate auxiliary channel ch3 type disk;
6 > allocate auxiliary channel ch4 type disk;
7 > target database duplicate testing up to THAT TIME "2013-12 - 25:10:47:00';"
{8 >}
and get below error
content of Script memory:
{
until ' 2013-12 - 25:10:47:00 ";
recover
clone database
delete archivelog
;
}
execution of Script memory
executing command: SET until clause
From pick up to 2013-12 - 27:18:12:49
starting media recovery
Oracle error:
ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error
ORA-01194: file 1 needs a recovery more match
ORA-01110: data file 1: '+ DATA/test/datafile/system.390.835293413 '.
output channel: ch1
output channel: ch2
output channel: ch3
output channel: ch4
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of Db in dual at 27/12/2013 18:14:10
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-06053: unable to perform the recovery of the media because of the missing journal
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291696 lowscn 74780879027
RMAN-06102: no channel to restore a backup or a copy of the diary of don't thread 1 seq 153927 lowscn 74780427224
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291691 lowscn 74763859437
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291690 lowscn 74763843501
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291689 lowscn 74762972560
RMAN-06102: no channel to restore a backup or a copy of the diary of don't thread 1 seq 153920 lowscn 74761443419
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291688 lowscn 74758111689
RMAN-06102: no channel to restore a backup or a copy of the diary of don't thread 1 seq 153919 lowscn 74758103358
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291687 lowscn 74758088445
RMAN-06102: no channel to restore a backup or a copy of the diary of don't thread 1 seq 153918 lowscn 74758078214
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291686 lowscn 74758067675
RMAN-06102: no channel to restore a backup or a copy of the diary of don't thread 1 seq 153917 lowscn 74758049415
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291685 lowscn 74758046873
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291684 lowscn 74758026214
RMAN-06102: no channel to restore a backup or a copy of the diary of don't thread 1 seq 153916 lowscn 74757674479
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291683 lowscn 74757658342
RMAN-06102: no channel to restore a backup or a copy of the diary of don't thread 1 seq 153915 lowscn 74757643881
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291682 lowscn 74757641006
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291681 lowscn 74757621180
RMAN-06102: no channel to restore a backup or a copy of the diary of don't thread 1 seq 153914 lowscn 74757618464
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291680 lowscn 74757599470
RMAN-06102: no channel to restore a backup or a copy of the diary of don't thread 1 seq 153913 lowscn 74757584128
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291679 lowscn 74757584121
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291678 lowscn 74757567231
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291677 lowscn 74757550865
RMAN-06102: no channel to restore a backup or a copy of the diary of don't thread 1 seq 153912 lowscn 74757547289
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291676 lowscn 74757533624
RMAN-06102: no channel to restore a backup or a copy of the diary of don't thread 1 seq 153911 lowscn 74757513739
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291675 lowscn 74757513659
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291674 lowscn 74757498265
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291673 lowscn 74757483667
RMAN-06102: no channel to restore a backup or a copy of the diary of don't thread 1 seq 153910 lowscn 74757469005
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291672 lowscn 74757468526
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291671 lowscn 74757453293
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291670 lowscn 74757440237
RMAN-06102: no channel to restore a backup or a copy of the diary of don't thread 1 seq 153909 lowscn 74757426220
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291669 lowscn 74757422172
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291668 lowscn 74757407202
RMAN-06102: no channel to restore a backup or a copy of the diary of don't thread 1 seq 153908 lowscn 74757389651
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291667 lowscn 74757386560
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291666 lowscn 74757369955
RMAN-06102: no channel to restore a backup or a copy of the diary of don't thread 1 seq 153907 lowscn 74757352175
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291665 lowscn 74757351898
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291664 lowscn 74757335274
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291663 lowscn 74757319172
RMAN-06102: no channel to restore a backup or a copy of the diary of don't thread 1 seq 153906 lowscn 74757314019
RMAN-06102: no channel to restore a backup or a copy of the journal don't screw 2 seq 291662 lowscn 74756304245
MAN-06102: no restaurant chain
RMAN >
RMAN >
well let me know what command should I use to do the archivelog backup if it is not present in our existing backup, restore and recover up to what sequence and thread
Can you restore your backup to tape archivelogs and apply them manually to the restoration of the database?
list backup of archivelog from the logseq in the error message to check if they are available. And what type of device. You may find that they are available on the device of type TAPE (SBT) but you specified the device DISC type in the command duplicate.
As long as you have the archivelogs need supported somewhere, you can restore it and apply then having the OPEN RESETLOGS command completed successfully
-
RMAN duplicate for standby database failed
Hello
I have try several times and for one reason, the auxialiary database finished just as it goes up the auxiliary instance.
Target database in double check to stanby with the following error. Primary and auxiliary bodies
Run 11.2.0.2 and are on the same platform of Solaris/patches. Everyone ran in that issue and solve it?
RMAN target / catalog user@catalog
startup nomount
Run {}
allocate auxiliary channel tp1 type sbt_tape;
allocate auxiliary channel tp2 type sbt_tape;
target database double standby nofilenamecheck;
}
:
:
:
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00601: fatal error in the Recovery Manager
RMAN-03004: fatal error when executing command
RMAN-04006: auxiliary database error: ORA-01092: ORACLE terminated instance. Disconnection forced
RMAN-03002: failure of the command duplicate Db at the 15:28:52 01/02/2012
RMAN-05501: abandonment of duplicate target database
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-03009: failure of switch control on channel clone_default at the 15:28:52 01/02/2012
ORA-03113: end of file on communication channelYou have error ORA-7445. I would ask allows you to check the MOS document that said Mseberg.
Also, do not have the DATA01 on the standby database if your wait is a database not ASM. But you must give the path in the db_file_name_convert and log_file_name_convert on the eve pfile/spfile database
1 question: is your watch set up database to be on ASM or not?
See document MOS * no not guide to create physical standby on Normal file system for ASM primary with RMAN [838828.1 ID] * If your principal is on ASM and intelligence on the file system
See document MOS * Step By Step Guide on creating physical standby with RMAN duplicate in ASM Filesystem for primary ASM [837102.1 ID] * If your primary and the day before are on ASM
Published by: srp on February 3, 2012 03:49
-
Failed to start after the duplicate database dbconsole
Hello
The last time I tried to replicate a database on oracle database 11 g 2. Data source a sid is vvcoredb and database target a sid is orcl. I duplicated from VVCOREDB to well ORCL. I can access and query the database on ORCL. But I can't access dbconsole. I don't know why. I missed a few things?
P/s: I database starting with the default command is: sql > startup.
Anyone have any suggestions for me?
Thanks in advance!See the emca command-line reference
http://docs.Oracle.com/CD/E11882_01/server.112/e25494/dbcontrol002.htm#ADMIN13410EMCA - deconfig dbcontrol db | all - rest drop
EMCA - config dbcontrol db | rest all - createHemant K Collette
-
Hi all
_ While I was trying to test the database duplicate, I found this error
[oracle@amila ~] $ export ORACLE_SID = dup
[oracle@amila ~] $ rman target sys/oracle@orcl auxiliary.
Recovery Manager: release 11.2.0.1.0 - Production Thu Jun 2 16:30:55 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: ORCL (DBID = 1279684735)
connected to the auxiliary database: DUP (unassembled)
RMAN > duplicate target database to the dup
2 > active database
3 > spfile;
From duplicate Db 2 June 11
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of Db in dual at 02/06/2011 16:33:31
RMAN-06217: not connected to an auxiliary database with a network service name
RMAN > exit
Complete recovery manager.
[oracle@amila ~] $
[oracle@amila ~] $ rman target sys/oracle@orcl auxiliary /@dup
11.2.0.1.0 - production on Thu Jun 2 of Recovery Manager: release 16:34:16 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: ORCL (DBID = 1279684735)
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00554: initialization of the package manager internal collection failed
RMAN-04006: auxiliary database error: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
[oracle@amila ~] $
_ And I have the following, as well
[oracle@amila ~] $ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on June 2, 2011 16:48:25
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start date June 2, 2011 07:06:26
Uptime 0 days 9 h 41 min 59 s
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/grid/product/11.2.0/grid/network/admin/listener.ora file
The listener log file /U01/app/grid/diag/tnslsnr/AMILA/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=amila.swt.lk) (PORT = 1521)))
Summary of services...
Service '+ ASM' a 1 instance (s).
Instance '+ ASM' READY State, has 1 operation for this service...
Service 'catdb.amila.swt.lk' has 1 instance (s).
Instance "catdb' READY State, has 1 operation for this service...
'Dup' service has 1 instance (s).
Instance "dup", LOCKEDstatus, has 1 operation for this service...
Service 'orcl.amila.swt.lk' has 1 instance (s).
Instance "orcl", State LOAN, has 1 operation for this service...
Service 'orclXDB.amila.swt.lk' has 1 instance (s).
Instance "orcl", State LOAN, has 1 operation for this service...
Service 'test.amila.swt.lk' has 1 instance (s).
Instance of 'test', State LOAN, has 1 operation for this service...
The command completed successfully
[oracle@amila ~] $
[oracle@amila ~] $ tnsping dup
AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on June 2, 2011 17:03:44
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Use settings files:
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = amila.swt.lk) (PORT = 1521))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = dup)))
OK (0 msec)
_ And the tnsnames.ora has these lines as well
tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DUP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = amila.swt.lk) (PORT = 1521))
)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dup)
)
)
Could someone advise me on this subject please_First cannot connect to the only auxiliary database, let us know you are able to connect or not
sqlplus sys/***@dup as sysdba
&
RMAN target sys/***@dup
post any errors
-
Duplicate database RMAN 11 GR 2 ORA-17627 ORA-01017 RMAN-03009 ORA-17628
Hello
I'm getting ORA-17627: ORA-01017: name of user and password invalid. connection refused when using the RMAN duplicate on the same host using the account Oracle DBA. The system is Linux Oracle and Oracle 11.2.0.1 5.5
I tested the connectivity and passwords and everything works fine. What could be the reason of this problem please?
Details below:
Thank you.
H3. Summary of the solution:
A big thank you to all who responded! The problem is solved finally :-)
The ORA-17627: ORA-01017 has been corrected using the connection string to connect to the target database, instead of target rman / in the command prompt
However, there was still another question:$ rman RMAN> connect target sys/password@orcl RMAN> connect auxiliary sys/password@clonedb RMAN> duplicate target database to clonedb from active database;
The alert.log to the auxiliary database (clonedb) shows:channel ORA_DISK_1: starting datafile copy input datafile file number=00001 name=+DATA/orcl/datafile/system.256.737564331 RMAN-03009: failure of backup command on ORA_DISK_1 channel at 12/29/2010 14:40:21 ORA-17628: Oracle error 19505 returned by remote Oracle server continuing other job steps, job failed will not be re-run
Errors in the /u01/app/oracle/diag/rdbms/clonedb/clonedb/trace/clonedb_ora_6129.trc file:
ORA-19505: impossible to identify the file ' / scratch/oradata/clonedb/datafile/orcl/datafile/system.256.737564331 '.
ORA-27040: create file error, cannot create the file
Linux-x86_64 error: 2: no such file or directory
I fixed the problem by changing the following text in the settings of the clonedb instance file:
* .db_file_name_convert =('+Data/ORCL/','/Scratch/oradata/clonedb/')
* .log_file_name_convert =('+Data/ORCL/onlinelog/','/Scratch/oradata/clonedb/logfile/')
Thank you!
H3. Problem:
H3. Configuration[orcl@ol55]$ rman target / Recovery Manager: Release 11.2.0.1.0 - Production on Tue Dec 28 21:40:25 2010 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. connected to target database: ORCL (DBID=1265345286) RMAN> connect auxiliary sys/test@clonedb connected to auxiliary database: CLONEDB (not mounted) RMAN> duplicate target database to clonedb from active database; Starting Duplicate Db at 28-DEC-10 using target database control file instead of recovery catalog allocated channel: ORA_AUX_DISK_1 channel ORA_AUX_DISK_1: SID=19 device type=DISK contents of Memory Script: { sql clone "create spfile from memory"; } executing Memory Script sql statement: create spfile from memory contents of Memory Script: { shutdown clone immediate; startup clone nomount; } executing Memory Script Oracle instance shut down connected to auxiliary database (not started) Oracle instance started Total System Global Area 839282688 bytes Fixed Size 2217992 bytes Variable Size 645924856 bytes Database Buffers 188743680 bytes Redo Buffers 2396160 bytes contents of Memory Script: { sql clone "alter system set db_name = ''ORCL'' comment= ''Modified by RMAN duplicate'' scope=spfile"; sql clone "alter system set db_unique_name = ''CLONEDB'' comment= ''Modified by RMAN duplicate'' scope=spfile"; shutdown clone immediate; startup clone force nomount backup as copy current controlfile auxiliary format '/scratch/oradata/clonedb/controlfile/control01.ctl'; restore clone controlfile to '/scratch/oradata/clonedb/controlfile/control02.ctl' from '/scratch/oradata/clonedb/controlfile/control01.ctl'; alter clone database mount; } executing Memory Script sql statement: alter system set db_name = ''ORCL'' comment= ''Modified by RMAN duplicate'' scope=spfile sql statement: alter system set db_unique_name = ''CLONEDB'' comment= ''Modified by RMAN duplicate'' scope=spfile Oracle instance shut down Oracle instance started Total System Global Area 839282688 bytes Fixed Size 2217992 bytes Variable Size 645924856 bytes Database Buffers 188743680 bytes Redo Buffers 2396160 bytes Starting backup at 28-DEC-10 allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID=35 device type=DISK channel ORA_DISK_1: starting datafile copy copying current control file RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of Duplicate Db command at 12/28/2010 21:42:08 RMAN-03015: error occurred in stored script Memory Script RMAN-03009: failure of backup command on ORA_DISK_1 channel at 12/28/2010 21:42:08 ORA-17629: Cannot connect to the remote database server ORA-17627: ORA-01017: invalid username/password; logon denied ORA-17629: Cannot connect to the remote database server
H4. Listener and Tnsnames
H3. Note: (UR = A) clause in tnsnames.ora is intended to operate with a dynamically
Manager recorded for the SERVICE_NAME against SID is preferable. (ID 362656.1)
H4. pFile and spfile$ cat /u01/app/oracle/product/11.2.0/grid/network/admin/listener.ora LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = ol55.example.com)(PORT = 1521)) ) ) SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (ORACLE_HOME= /u01/app/oracle/product/11.2.0/db) (SID_NAME = clonedb) (GLOBAL_DBNAME= clonedb.example.com) ) ) ADR_BASE_LISTENER = /u01/app/oracle ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON $ cat tnsnames.ora # tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db/network/admin/tnsnames.ora # Generated by Oracle configuration tools. CLONEDB = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = ol55.example.com)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = clonedb.example.com) (UR = A) ) ) $ lsnrctl status LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 28-DEC-2010 21:35:54 Copyright (c) 1991, 2009, Oracle. All rights reserved. Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521)) STATUS of the LISTENER ------------------------ Alias LISTENER Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production Start Date 26-DEC-2010 02:59:35 Uptime 2 days 18 hr. 36 min. 18 sec Trace Level off Security ON: Local OS Authentication SNMP OFF Listener Parameter File /u01/app/oracle/product/11.2.0/grid/network/admin/listener.ora Listener Log File /u01/app/oracle/diag/tnslsnr/ol55/listener/alert/log.xml Listening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ol55.example.com)(PORT=1521))) Services Summary... Service "+ASM" has 1 instance(s). Instance "+ASM", status READY, has 1 handler(s) for this service... Service "clonedb.example.com" has 2 instance(s). Instance "clonedb", status UNKNOWN, has 1 handler(s) for this service... Instance "clonedb", status BLOCKED, has 1 handler(s) for this service... Service "orcl.example.com" has 1 instance(s). Instance "orcl", status READY, has 1 handler(s) for this service... Service "orclXDB.example.com" has 1 instance(s). Instance "orcl", status READY, has 1 handler(s) for this service... Service "test.example.com" has 1 instance(s). Instance "test", status READY, has 1 handler(s) for this service... Service "testXDB.example.com" has 1 instance(s). Instance "test", status READY, has 1 handler(s) for this service... The command completed successfully
H4. Password file and the connection test$ cat initclonedb.ora clonedb.__db_cache_size=192937984 clonedb.__java_pool_size=4194304 clonedb.__large_pool_size=4194304 clonedb.__oracle_base='/u01/app/oracle' clonedb.__pga_aggregate_target=339738624 clonedb.__sga_target=503316480 clonedb.__shared_io_pool_size=0 clonedb.__shared_pool_size=293601280 clonedb.__streams_pool_size=0 *.audit_file_dest='/u01/app/oracle/admin/clonedb/adump' *.audit_trail='db' *.backup_tape_io_slaves=TRUE *.compatible='11.2.0.0.0' *.control_files='/scratch/oradata/clonedb/controlfile/control01.ctl','/scratch/oradata/clonedb/controlfile/control02.ctl' *.db_block_checking='full' *.db_block_checksum='full' *.db_block_size=8192 *.db_create_file_dest='/scratch/oradata/clonedb' *.db_domain='example.com' *.db_name='clonedb' *.db_recovery_file_dest='+FRA' *.db_recovery_file_dest_size=12884901888 *.log_archive_dest='/scratch/oradata/clonedb/archivelog' *.diagnostic_dest='/u01/app/oracle' *.dispatchers='(PROTOCOL=TCP) (SERVICE=clonedbXDB)' *.memory_target=843055104 *.open_cursors=300 *.processes=150 *.remote_login_passwordfile='EXCLUSIVE' *.undo_tablespace='UNDOTBS1' *.db_file_name_convert=('+DATA','/scratch/oradata/clonedb/datafile') *.log_file_name_convert=('+DATA','/scratch/oradata/clonedb/logifle') $ sqlplus / as sysdba SQL*Plus: Release 11.2.0.1.0 Production on Tue Dec 28 21:26:41 2010 Copyright (c) 1982, 2009, Oracle. All rights reserved. Connected to an idle instance. SQL> startup nomount pfile='$ORACLE_HOME/dbs/initclonedb.ora' ORACLE instance started. Total System Global Area 839282688 bytes Fixed Size 2217992 bytes Variable Size 641730552 bytes Database Buffers 192937984 bytes Redo Buffers 2396160 bytes SQL>
Published by: Dude on December 29, 2010 06:37$ orapwd file=$ORACLE_HOME/dbs/orapwclonedb password='test' $ sqlplus 'sys/test@clonedb as sysdba' SQL*Plus: Release 11.2.0.1.0 Production on Tue Dec 28 19:58:14 2010 Copyright (c) 1982, 2009, Oracle. All rights reserved. Connected to an idle instance.
Hi guy,
Please configure the tnsnames and auditor of the target and auxiliary.
That set the script to use OIC to connect in both instances like this:connect target sys/test@orcl
connect auxiliary sys/test@clonedbPlease after the release.
Kind regards
Tycho -
Test the connection to the database failed: connection to the server could not
I have one of my servers HPOV NNMi 9.23 restarted this morning and NNMi is loading is no longer. I see the following errors in the newspapers said:
/var/opt/OV/log/NNM/public/nmsdbmgr.log
06/04/2015-09:28:05 connection to the database test failed: connection to the server could not: connection refused
The server running on host "127.0.0.1" and accept
TCP/IP connections on port 5432?/var/opt/OV/log/NNM/public/postgres.log
2015-04-06 09:25:55.312 EDT: 8580:0LOG: could not translate the hostname "localhost", "5432" service at the address: name or service not known not
2015-04-06 09:25:55.312 EDT: 8580:0WARNING: could not create listen to "localhost".
2015-04-06 09:25:55.312 EDT: 8580:0FATAL: could not create TCP/IP sockets
I have checked/etc/hosts and found the following entry:
#; Local
#;
127.0.0.1 localhostThe command line, I can ping localhost without problem. Not sure why NNMi begins not at this point.
Turns out be the permissions on the file/etc/hosts.
-
Connect to the Oracle database fails when you use Microsoft ODBC or OLE DB Driver
There was a problem when you apply the KB3126587 hotfix where connections to an Oracle database using the Microsoft ODBC driver fails if run from automated processes. Running the same process manually would succeed. The update issued KB3147071 solved the problem successfully.
Yesterday, several patched have been applied and the problem came back. The patches are: KB2862152, KB2868626, KB3163244, KB3168965, KB3170455, KB3163251.
I saw yet no acknowledgement or difficulty of Microsoft. I prefer not to uninstall security patches, but it is a problem of production.
Any ideas what specific patch maybe breaking it again?
Thank you
Josh
Server: Windows 2008 R2
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
addition of relief in dataguard broker database fails
When adding of Eve in dataguard broker database, I get the following error
DGMGRL > add database as uat login is uat maintained as physical;
Error: ORA-16698: parameter LOG_ARCHIVE_DEST_n defined for the object to add
Failed.
DGMGRL > output
I deleted the log_archive_dest_2 parameter in the primary database and null value
SQL > sho parameter log_archive_dest_1;
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
Log_archive_dest_1 string LOCATION = USE_DB_RECOVERY_FILE_
DEST = VALID_FOR (ALL_LOGFILES, A).
LL_ROLES) DB_UNIQUE_NAME = prod
SQL > sho parameter log_archive_dest_2;
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
LOG_ARCHIVE_DEST_2 string
log_archive_dest_20 string
Can someone help me please
vmkumar wrote:
When adding of Eve in dataguard broker database, I get the following error
DGMGRL > add database as uat login is uat maintained as physical;
Error: ORA-16698: parameter LOG_ARCHIVE_DEST_n defined for the object to add
Failed.
DGMGRL > output
I deleted the log_archive_dest_2 parameter in the primary database and null value
SQL > sho parameter log_archive_dest_1;
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
Log_archive_dest_1 string LOCATION = USE_DB_RECOVERY_FILE_
DEST = VALID_FOR (ALL_LOGFILES, A).
LL_ROLES) DB_UNIQUE_NAME = prod
SQL > sho parameter log_archive_dest_2;
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
LOG_ARCHIVE_DEST_2 string
log_archive_dest_20 string
Can someone help me please
What you have shown here is the log_archive_dest_2 of the primary database. You must clear the log_archive_dest_2 of the standby database too.
The error is speaking on the parameter log_archive_dest_2 of the database pending. 12 c, then the broker configuration, you must clear the log_archive_dest_2 (destinations archive remote) on the primary and standby databases. DG broker would take care of her.
On autonomy in standby:
SQL > alter system set log_archive_dest_2 = ";
And then try to add the standby database to the broker configuration.
HTH
-Jonathan Rolland
-
Recover the database failed after restoration
Dear people,
We are trying to restore the RMAN backup on another Linux machine. We did this activity several times. The backup has been taken from a RAC instance and we are trying to restore to RAC. After the success of the restoration of the data files, while we publish "recover the database'; It ends with the following error messages:
RMAN-00571, RMAN-00569
RMAN-03002 recover command failedRMAN-11003 failure during parsing / execution of the sql statement: alter database recover if necessary until cancel using backup control file
ORA-19801: DB_RECOVERY_FILE_DEST initialization parameter is not defined
ORA-00280: change 123123213123213123 thread 1 is in sequence #10787
Kind regards
Ali
ProDBA wrote:
Dear people,
We are trying to restore the RMAN backup on another Linux machine. We did this activity several times. The backup has been taken from a RAC instance and we are trying to restore to RAC. After the success of the restoration of the data files, while we publish "recover the database'; It ends with the following error messages:
RMAN-00571, RMAN-00569
RMAN-03002 recover command failedRMAN-11003 failure during parsing / execution of the sql statement: alter database recover if necessary until cancel using backup control file
ORA-19801: DB_RECOVERY_FILE_DEST initialization parameter is not defined
ORA-00280: change 123123213123213123 thread 1 is in sequence #10787
Kind regards
Ali
1. as you have said several times, you performed the restore, then you have not yet checked the parameter above so defined or not?
2. I hope that its very easy to understand ENGLISH characters
3 try to correctly set the parameter and size, try again to display the error (since some changes for thread 1 is necessary (hopefully, you gave 123 repeatedly instead of posting of the number of real change in your message))
-Pavan Kumar N
-
Hi experts. I duplicate my database to another server. My question is what should I copy file full backup on my server to another or not?
Hello
Follow the same pattern
http://docs.Oracle.com/CD/B19306_01/server.102/b14237/initparams112.htm#REFRN10098
LOG_FILE_NAME_CONVERT = '
string1
' , '
string2
' , '
string3
' , '
string4
' , ...
Where:
string1
is the model of the primary database file namestring2
is the model of the database backup file namestring3
is the model of the primary database file namestring4
is the model of the database backup file name
-Thank you
Pavan Kumar N
Maybe you are looking for
-
Move disks of 6 Ultra Os 6 to RN 316
I replace my Ultra 6 which I've upgraded to OS 6.5.1 with a RN316, Can I just move the disks (6 x 4) to the new unit w/o any problems?
-
HP4630: Recording digitized pages with HP 4630
I have a printer all-in-One of 4630. I don't know if I have 8.1 Windows 32-bit or 8.1 with 64 bit (it's a new laptop Dell Inspiron 17R, so everything it came with that is the standard). The scanner worked perfectly until yesterday. It does not save
-
I have canon MP170 100. use 1/2 pro gloss or shine pro 3 paper?
What is the reason to why should I choose paper phot canon pro his 1/2 on the pro 3 photo paper luster when I created the profile of canon paper?
-
How to do a clean install of Windows 7 Professional of a DVD on the ProBook s 4530?
So I have Windows 7 Home Premium 64 - bit installed on my laptop and I want to get rid of it completely and to do a clean install of Windows 7 Professional 64 bit from a DVD.I don't want to use windows anytime upgrade somehow! Because I have a few se
-
Problem with a Dell N4032F switch
Hi all I'm a bit of a newb when it comes to Dell networking having had a background in Cisco IOS, so maybe this is a stupid question but... My equallogics can replicate is no longer at our Dr site and I suspect that this could be the reason Descript