Duplicate in options entries?

Similar Questions

• Individual ringtones for duplicate in Contacts entries?

  I've set up three different people (my wife, daughter a me) in the Contacts application to have the same phone # and ringtone (which is different from installing default ringtone in the settings).

  When my wife or daughter calling me from the phone at home, I think that the iPhone would ring using the ringtone I set up for them.

  However, the rings of the iPhone using the default ringtone instead.

  No idea why and how get the iPhone sounds using the ringtone I have install for these contacts?

  Thank you

  -Mike

  OK, here is the solution to the problem.

  I have the same phone number in my contact, my wife contact card card and the contact card for my daughter (which houses our phone number).

  The minute I removed the entry for this phone # in my card, my iPhone has produced the correct ring when called from this #.

  Perhaps, in the spirit of Apple, whenever someone calls my house phone number, his will be either my wife or my daughter, not me (there is no option in my card, as the owner of the iPhone, to set the ringtone as there are in other contacts).

  -Mike

• Restrict the records that duplicate during data entry bulk of the multi record details

  I have three fields (empno, edate, deptno) in an overtime_d block. I want to restrict it to duplicate entry. can u please guide me

  Hello
  It should useful to you.

  http://SheikYerbouti.developpez.com/duplicates/duplicates.htm

  Mark useful/correct.

  Iqbal

• Tryig to install Com + security install, get the error "the COM + sub system is concealing duplicate event log entries to 86400 seconds.

  I try to install the installer Com + security but there is error thorwing as... The subsystem of COM + deletes log entries of events in double to 86400 seconds.  The removal timeout can be controlled by a REG_DWORD value called SuppressDuplicateDuration under the registry key next: HKLM\Software\Microsoft\COM3\Eventlog.

  Product: MMFSecurity - error 1001. Error 1001. An exception occurred during the validation phase for the installation. This exception is ignored and the installation will continue. However, the application may not work properly after installation. --> FATAL: component not found ' MMF. Core.MessageSecurityComPlusHost.MsgCodec' we just install.
  (NULL)
  (NULL)
  (NULL)
  (NULL)

  the message resource is present, but the message is not in the string/message table

  Hello

  ·          On what operating system are you trying to install?

  I suggest you to post your query in Microsoft TechNet forums as they are here.

  Here is the link to the TechNet forums: http://social.technet.microsoft.com/Forums/en-US/categories

  Refer to: http://technet.microsoft.com/en-us/library/cc774146 (WS.10) .aspx

• Adding a page to a duplicate form double entries

  So I have a form (to the IRS) should I double page 4 a number of times.  When I do this by dragging to make duplicates 'pages', everything that I type in on one of the "duplicate" pages appears on each of them.

  Is there a way to disconnect so that all page 4 s are not the same page 4?

  No sense?

  Best regards, Andy

  OK, try the following in the interactive JavaScript console (Ctrl + J):

  // Get a reference to the template
  var t = getTemplate("Page 4");
  
  // Spawn the template as a new page at the end of the document
  t.spawn ({nPage : numPages, bRename : true, bOverlay : false});
  

  Place the cursor on the line of code with the call getTemplate and press Ctrl + Enter

  Then, place the cursor on the line of code with the call of t.spawn and press Ctrl + Enter as many times as necessary to create as many pages as you need.

  The pages will be added at the end of the document. You can move the pages where you love if you want somewhere else.

• 3.6.2 the numbers help find and remove duplicates in 2 columns

  Could someone help me please. I run a karaoke business. As you may have guessed I have books with many songs, 64 000 and more than 75% of these songs are duplicates so you can imagine by train to sort. Option 1 I could manually go through my list by removing duplicates or option 2 attempt to find a formula that works save me hours of blind deletion. Is there someone out there who can help? It would be much appreciated thanks.

  Here is a sample of the document I'm working.

  

  Hi robi.

  Here is a solution of Craig s. Ruddock in this discussion Re: duplicates warning formula

  

  Formula in B2 (fill down)

  = IF (COUNTIF($A,A) = 1",","duplicate")

  Now sort by column A

  

  Remove all but one of the "duplicate" lines for each song.

  Kind regards

  Ian.

• Acer Liquid E2 Duo - developer Options

  I use the 'Developer Options' entry under Systrem settings / system, in order to put the unit into USB debugging mode when synchronizing with Outlook.

  But now that the entry has disappeared from the menu. How can I get that back?

  Hello

  Go to 'Settings'-> 'about phone' and press the build number, 6 times it will show dev options.

• RMAN Duplicate + incremental backups + upgrade to 12 c

  Hello

  IM thinking the best way migrationg and upgrading database 11.2.0.4 to 12 c with reasonable downtime.

  reasonable downtime: 30 Minutes

  Source: Solaris (Intel)

  11.2.0.4

  DB Dimensions: 800G

  Target: Linux

  12 c

  new name of the comic.

  IM thinking to use RMAN Duplicate with option NoOpen(1) (RMAN catalog is in use). Double will be for sure several of 30 minutes then think if I can combine two copies for the recovery of the archivelogs generated during replication to minimize downtime. But is it possible when I change DB_NAME?

  Thank you.

  Hello

  I guess, you may need to check once this document. 412484.1

  I'm really not sure about your source and target system

  If your source is the 'Platform_id' 20, you can enjoy all your needs in 30 minutes or less. If this isn't the case, it is difficult.

  If your platform_id is 20, you can then create physical standby for your 11.2.0.4 and get the same thing, once the database is recovered, you can convert this logic of sleep (note: your database must be validated for the logical expectation), if you convert your logical database in standby mode, then you can change the name of your database to the new name also you can upgarde to 12 c.

  After upgrade, you can still recover all changes to your primary. Once the logic ensures sync with primary then you can pass.

  If your platform_id not 20, then

  You can opt for Golden Gate...

  Thank you

• Full screen option full screen interactive

  Hi, I have an application full screen that has optional entry controls.  I would like that the priority to be just the only option full screen, and then if the user clicks on the text input area, they can then asked if they want the option of interactive full-screen.

  Currently appears not to be possible - instead, I have to check a) is the user already full-screen b) moving back to normal mode and c) hope the user clicks the new button and then propose the option full screen d) is in the affirmative, then full screen and then let them enter their text.

  At the moment Flash allows normal FULL_SCREEN_INTERACTIVE, but not to FULL_SCREEN_INTERACTIVE FULL_SCREEN.

  Is it possible that this might get fixed, or is it already possible and I just missed how to do?

  This can also be useful for games that go full screen and let users use the arrow keys (works with just FULL_SCREEN).

  If the user shows the app in full screen and wants to use a method of alternative struggle with no-FULL_SCREEN allowed keys (e.g. WASD), then the app can detect this and then switch from FULL_SCREEN FULL_SCREEN_INTERACTIVE and prompt the user to additional question to allow the use of the keys.

  From there, the user accepts either Yes (in which case the app remains full screen and keys can be used - that is, invisible swap for FULL_SCREEN_INTERACTIVE), or it returns to the previous state (FULL_SCREEN).

  Currently, appears not to be possible to do so - the user must use the event to return to NORMAL windowed mode, and then have the user click again to enter the FULL_SCREEN_INTERACTIVE guest mode.

  NORMAL-> FULL_SCREEN_INTERACTIVE: Possible

  FULL_SCREEN-> FULL_SCREEN_INTERACTIVE: NOT Possible (but should be)

• Select 'delete histroy navigation' in Windows 7 or while on the page web of Firefox (your instructions are not clear in this regard)

  I read your instructions on the Firefox Web site. What is not clear to me is, I have to do 'privacy settings' and ' browsing history delete "within the web site of Firefox or do I have to do this offline via Windows 7"internet settings ". The Firefox tab (top left) does not offer the choice of menu referring to your instructions. My laptop (offline) "internet settings" Please refer to the Internet Explorer settings (that I don't use) is not clear that the changes in my preferences influence on Firefox (or just Internet Explorer)

  If you have the Firefox button orange then you should see the Options entry in the column right above the entrance to help.

  • Press the F10 key or press the Alt key to bring up the 'Menu Bar' temporarily if the menu bar is hidden.
  • Use "Firefox > Options" instead of "tools > Options" If the menu bar is hidden.

• How to make a 3D cube?

  How to make a 3D layout on Mac cube?

  Well, it can be done.

  Inventory

  1. rectangles, 2
  2. parallelograms, 4

  Exploded diagram:                                                                                                Completed:

  

  Individually, you may want to organize each shape selected and in the tab object, set dressing to zero. This will facilitate alignment object later.

  Insert a rectangle and duplicate by option + do swipe an offset as shown above. Duplicate this last rectangle with an option-drag that it will become your playdough for the first form of parallelogram. Select the third rectangle and then on the Format menu, choose shapes and lines: make it editable. To the four corners of the rectangle will have now taken red, which you can pull and push to get to the first form of parallelogram. Click outside the shape to dismiss the Red edit handles. When you have an approximate parallelogram shape, option + do slide once to do the opposite wall of the cube and then option-drag to another that will flip you (via the tab reorder), to make the top and then option-drag to reduce the shape of the bottom.

  At this point, you have the above exploded view. You don't have to worry when you drag the pieces together and they do not correspond exactly. Once more, you use the Format menu: shapes and lines: make editable to fine tune your editing of parallelogram in their locations next to the cube. When I did, I selected the content of all of the cube and applied 0.5 pt gray border lines, and each face of the cube is 38% opacity. Fill color for each face of the cube is optional.

• Details techniques Subvi

  For many functions, LabVIEW, there is required (in bold) and entered into option inputs (non-bold).

  If the optional inputs are not wired, the function uses a predetermined default.

  Is there an easy way to do it with the Subvi?
  As you are all wiring connector on the front panel, is there a way to specify a require / optional entry?

  Yes, if it's on the connector of the icon. I use that in one of my old vbery 'Event_loggers '. For special operations such as commissioning, I pass an enum that says 'init '. Most of the time it's to errors so that the default value is the value 'Post' so that it can be used without the enum.

  If it is NOT on the connector of the icon then "depends" If the VI had already been called, and if something was writtien in control non-icone connector.

  Ben

• Table of Cluster size cluster controller?

  I often use the table VI of Cluster to change quickly to a data table in a cluster of data I can then connect to a waveform graph.  Sometimes, the number of parcels can be different which translates (full of zeros) additional plots on the chart, or missing parcels if the array is larger than the current cluster size.  I know that I can right-click on the node and manually set the size of cluster (up to 256).  I could also use a structure dealing with several table of Cluster nodes that I need, set them individually and a table of wire to the switch structure size case but this is the kind of a PITA.

  My question is if someone knows a way to control the size of cluster programmatically value.  It seems that if I do a right click and do it manually there must be a way to automate it, but I of course can't understand.  Would be nice if you can just wire your right desired value in an optional entry on the node itself.  Any ideas would be very appreciated.

  I feel that it is impossible.  See this idea of related discussion.

• Queue of the preview to the opposite end

  Is it possible to get a glimpse of a queue of LabVIEW to the opposite end?

  I'm using LabVIEW 8.6

  Thanks a lot for your help

  Conway

  The Get File Status function has an optional entry to return items. If this is true, the function will return an overview of all the elements in the queue. Then, you can index on the last element of the array to display a preview of the latest thing in the queue.

  

• Visa read write on port series independently and at the same time!

  Hi all!

  I need to read and write data to and from a serial port (rs232) independently and simultaneously .

  I'm sorry that I can not put a picture of that, but it's very simple:
  

  I used "set up the serial port" and forwarded to two while loops, the resource reference.

  a loop is reading data and the other loop is writing data to the port.

  the problem is when the playback loop (function serial reading) waiting for data - it blocks the other loop to run (writing of the serial function is blocked).

  I searched the forum and find this visa open function has 'duplicate session' option - that's what I need?

  If true, can someone explain exactly how to wire and use it in the right direction?

  Thank you very much.

  Guy.

  OK, I found an example that solved my problem: a VI called   serialduplicatesessions.

  The file is associated.

  Here is the link for all cases: http://zone.ni.com/devzone/cda/epd/p/id/1727