Duration of still images

Similar Questions

• Cannot change the duration for still images?

  I have a bunch of stills in my Timeline that are of the same duration. I click with the right button on the first and select speed/time and change it if nothing happens. If I drag the clip on a new layer, I'm able to change the duration. Is there a way to change the individual duration of still images when they are already placed in the Timeline?

  Thank you.

  Right-click on the clip and select the speed/duration.  Don't forget to check the box for ripple edit, move the creeping Clips.    You can select and change multiple clips at "drawing", a box (marquee tool) around the appropriate clips, then right click on for speed/duration.

• ?? Still image default duration - can't change it?

  In the first 13 items:

  
  

  If I open a new project I can go to preferences and change the default duration of still images and when new is added to the timeline that they correspond to the value that I set.

  
  

  But I have an existing project, when I go to preferences and change the default fixed images for her, remains in about 6 seconds, ignores any changes I've made.

  
  

  Thoughts?

  
  

  James
  

  James

  The preference of Edit Menu/preferences/general for still Image default duration applies only to images imported once the adjustment has been made.

  To change still Image duration once again on the timeline, click with the right button on the timeline again, select Time Stretch and always set the time again for that in the duration field in the Time Stretch dialog box. You can do this for a single file or several files at once. For more than one at a time, select (all at the same time) stills involved, click anywhere in the selection, select Time Stretch and set the time yet in the Time Stretch dialog box which will apply to the entire selection.

  To select several files at once

  a. you hold down the SHIFT key, click each clip in the group selection

  or

  b. with the mouse cursor, draw a rectangle autour clips to participate in order to select the

  Please let us know if it works for you above.

  RTA

• still image default duration not what I say

  I do my preferences > still life > 15 images default image, but they are NOT.  They come in 5 seconds!

  What else is there to do?

  Thank you

  In case you are not aware, the setting does not change the duration of still images that are already in the project. After you change the setting, you must re-import the image.

• Duration of fixed images by default

  I'm trying to set the default duration of still images in 7 seconds, but it's always stays at 5 seconds. I'm on a timeline of 24 fps and I updated the image length 168 images. It will not however Ministry. What I am doing wrong?

  The default duration for still images is defined in the preferences (general).

  If you have already imported photos and you want to change the duration right in the project window, select the stills, right click and change the duration.

  Now you can add them to the timeline.

  If you already have pictures on the timeline, and they are the wrong duration, you can change a whole bunch of them at once with the ripple tool change like this:

  

• How to change still image duration?

  Imported a long series of still images to a part of a video slide show. The default value has been set at 2.5 seconds, but I need to change the time without having to remove the images and import them all again. Anyone? When trying to select them all and right click to get to speed/duration, I get a window that has this posted for existing life I guess: 00:00:02:18. Any changes I make to this number has zero effect. What Miss me?

  Check the Ripple edit in the speed settings dialog box.

• Still image duration in Prem items 11 (Win 10)

  Hello

  I have a number of 1290 x 1080 still images on my calendar and will add more. Once the slideshow has completed, it will be followed by a clip of 1290 x 1080 PAL.

  I am currently having each image in the slideshow, which all have a fade in and fade out, to last for 5 seconds each. Is it possible to select all images and setting their 5 second duration equal?

  I see this in the preferences:

  

  If I highlight each image on the timeline by holding down the SHIFT key, I choose 'Still Image default Duration' in preferences? If so, I do not know what that 150 frames is equivalent to the screenshot above. As I say, I'm looking for an equivalent period of 5 seconds.

  Thank you.

  Steve

  Steve

  I think that we must consider the drive specifications.

  But, as I said, there are cases where for compatibility reasons, disc needs a folder with the folder VIDEO_TS and first Elements Audio_TS offers only the VIDEO_TS folder.

  But let see if drive specifications will help define the problem of reading.

  RTA

• How can I change the default duration of a still image added to a video editing?

  How can I change the default duration of a still image added to a video editing? I think that he is currently 5 seconds.

  Hi Cheyenne,

  I think that you go to After Effects. I've never found a preference for setting the default duration for each still that you import.

• Still Image default duration - bad scenario

  Hello

  I have a lot of photo that I is inserted into the timeline. "" I have Change Preferences-> general-> still Image default duration "at 10 frames, but then I insert an image in the chronology, there fill 18 images..."   Why?

  

  If you have already imported a bunch of still you can change the duration in the project window.

  Select all/right click/speed-time

• Control the duration of numbered still images

  In collaboration with the premier cs5 (and AE).

  I started making numbered distillers of import because I wanted to warp to the help of twixor and a filter to strain. The images come in fast motion, I guess mount according to setting sequence. It wasn't a problem because I go to slo it to 30% and get these images of weird distortion.

  Now I want it slow down and be mor jumpy. so I want the stills to 6-10 views each.

  How can I control the duration of the frame of a sequence of time?

  How can I define in the active panel in several still image or video?

  Is there a better way in AE?

  Numbered Still can only be a frame each.  If you need an image to last longer than an image, and then import you individual frames, instead of numbered stills.

  The duration of these images is defined in Edition > Preferences > General...

• PE8 - change the duration of a still image WITHOUT the help of the cursor?

  It is probably quite trivial, but for the life of me I can't find anywhere.

  I would like to change the duration of a static image playback - I import defined by default in 5seconds. I know that I can change it with the sliders, but that never seems to give me a quantity specified time trying to match multiple pictures. (think of a slideshow integrated in a video)

  Y at - it a trick somewhere? It's super duper easy at first, but they seem to have abandoned the service from what I can tell in PRE.

  Thanks in advance.

  By click-and - drag on either the head or tail of the still with the timeline zooms in, you have a specific edition. If you need to increase the duration of 3 images, just expand it by 3 ticks on the rule of the timeline. You can also view it in the Info Panel (it is a group that I use all the time).

  Good luck

  Hunt

• Duration of the Image will not always change 3

  It's crazy, there must be a button somewhere that I missed. Since the upgrade, I've not been able to adjust the duration of a still image.

  When I import a new still image in the project Timing prperties are automatically set to:
  In: 1 (in pictures)

  Out: 3

  Duration: 3

  Can I change the number, but it will not save the new number. I can't expand the size of the image in the timeline panel either.

  How do I increase the time so my background image will remain throughout this project? Thank you.

  Never mind the top of the Timing box, it was a constant time, checkbox, had to uncheck.

• How to make a standard DVD of still Images in the correct proportions on the DVD?

  The Premier Pro CC 2014 Apple MacBook Pro 10.10.5 DVD Superdrive Samsung PX2370 Dual monitors

  It comes to make a slideshow of lightroom still images on a standard DVD.

  If I choose:

  New project form - DV

  Preferences - Still Image duration - 30 seconds 3 pictures

  Export - MPEG2-DVD - DV NTSC 720 X 480 NTSC 29.97 STANDARD 4:3

  Time line report Correct Veritical Aspect full screen

  Program the Panel - Aspect Ratio Correct Horizontal black Bars

  Queue - MPEG2-DVD NTSC DV

  The sequence settings: unless the default scale image size is selected in the General preferences

  The image is very much out of proportion with or without zoom

  Tried several presets, that does not

  Scale to the size of the selected image

  New project created with all the settings above

  Including the default scale to the size of the image

  Image in the window of the program format is Correct

  The sequence presented without change settings

  Custom - 29, 97-3988 x 2649 pixel square progressive 29.97 Drop Frame

  Export settings - NTSC 720 x 480 widescreen

  Successful of the queue

  New project-DVD 720 x 480 29.97

  Import the Aspect Ratio of Correct time line

  Play DVDs on Mac - good reading of DVD on standard DVD player or Playstation

  Image format - incorrect image tool large horizontal black Bars

  Vertical - top of the picture cut off

  First of all, I'd do the widescreen dvd.

  I would like to start with a normal of 1920 x 1080 1.0 and progressive.

  Put all my photos (no scale to the size of the image) reduce manually to fit the screen or correct the composition.

  When finished exporting to mpeg2-dvd widescreen ntsc.

  Load the file in again and burn to dvd.

• Title and still Image issues

  Running Adobe first CC caravan 8.1

  Windows 7 Ultimate Service Pack 1 with all latest updates

  I can import a still image in Premiere Pro, but it appears just in black in the source monitor.

  I can create a title, but once again, it shows only upward in black in the source monitor.

  If I try to drag a still image or a title to the timeline, the hand slide displays a circle with a line through it, indicating that it is not allowed.

  If I look at the speed/duration of the still image, it shows as 00:00:00:00.  Can I change the duration, but the OK button is gray and will not allow the change to be applied.

  If I look at the speed/time of a title, it shows that 00:00:00:00, but in the project Panel, it shows as 11:59:16:20.

  These features have worked before, and now they have stopped working.

  Any help to solve these problems would be greatly appreciated.

  Thank you

  Jerry

  Figured out, need to change the duration of 00:00:00:00.

• duration of the image?

  My apologies to the front if it is not the right forum for this question.

  I use the first elements 11 to create still images (JPEG or png) films which have been created with 3d software.

  My normal workflow is to import images (usually about 1500 images) place them in the timeline and set the duration of the image by choosing the

  all the images in the timeline panel - clicking right / stretch time / and then change the duration for the movie total will play in two minutes approximately. The link below is an example.

  Residence of Minnetonka 3d model fly around - YouTube

  I'm having a problem on my current project.

  Same procedure as above except that I use 3002 images in order to get a feel of true 30 fps more smooth to the film.

  My problem is that I am not able to MultiSelect the images in the scenario with any consistency in order to adjust the duration.

  If I select a single image, it works very well. I was able to select as much as 30 or 40 images at a time and bring them to adjust normally, but then the next group does not allow me to change the time, once I am in the time stretch dialog box. The time just shows all zeros and don't interact. It seems blind.

  I tried to re import the images with the default still duration image set at the lowest possible 1 border. Unfortunately, this is not yet the amount of time I'm looking for, I need de.03 seconds per image.

  I am probably not explain very well...

  The key is that I must be able to select individual images 3002 already in the timeline and in the world to set duration of these images that I want them to be.

  image size = 1920 x 1080

  I did a lot of these films in the past and the only thing I can see that is different from the amount of images

  Thank you in advance for any help you all can provide.

  Paul

  Hi Paul,.

  In the end, it must be made the correct number of images directly from the 3D program. In other words, if you want the video to play smoothly in 30 frames per second, then make 30 frames for every second. A 10 second clip should be composed of 300 images then and with duration in first value 1 frame and a sequence at 30 frames per second, so it should be nice and smooth. As soon as you start stretching both one way of the other, some executives must be duplicated or popped and which is always go, indeed, the flow of reading. The right calculation does not support a fluid reading otherwise.

  Thank you

  Jeff Pulera

  Safe Harbor computers