during the loading of data

Similar Questions

• Is it possible to ignore some accounts during the loading of data

  Hi, I have a rules file that I use to load the data.

  I want to ignore some accounts (only for now 112123, 123453, 546567) during my loading of data.

  is there a way to do... ?

  Thanks in advance

  Check by using a rules file to perform operations on documents, fields, and data

  Rejecting Records

  You can specify which fields Essbase ignores defining criteria of rejection. Rejection criteria are string and number conditions, when met by one or more fields of a record, causes Essbase refuse registration. You can set one or more criteria of rejection. If any field in the record meets the criteria of rejection, Essbase loads the record. For example, to dismiss the actual data from a data source and load only the budget data, create a rejection criterion for rejecting the records where the first field is real.

  Concerning

  Celvin Kattookaran

• HFM Consolidation during the loading of data

  Hi Experts,

  I have a small question on the Consolidation of the FDM to time data load of HFM.

  I know THAT FDM is going to pass parameters to the HFM to perform the Consolidation, all these entities available in the list of the VALIDATION ENTITIES to respective location and Validation group.

  My Question is, what scenario should he perform the consolidation in the HFM. (Where can I check it)

  1. It is based on the SCENARIO, mentioned in the validation logic in the VALIDATION RULE. (because, I find a difference from the same Point of view to scenario 2)

  If Abs (|) ACTUAL_1, ASSETS, PKI, Custom1, Custom2, Custom3, Custom4, Jolie; REAL ASSETS, PKI, Custom1, Custom2, Custom3, Custom4, |) > 10 then

  RESULT = False

  RES. PstrCheckMessage1 = "Difference between scenario 2, please check.

  On the other

  RESULT = True

  End If

  1. For the logic of the above rule, what scenario will be consolidated.

  Regarding

  Kath

  You're right, target category for your scenario of HFM.

  Active category of FDM is your selected in the bar of FDM POV category. Categories are used to "categorize" the data, such as scenarios. So you can see category FDM as script source.

• System error 31 during the loading of the LabVIEW runtime engine

  I get the following error message.  I've attached a screenshot of him as well.

  System error 31 during the loading of the LabVIEW runtime engine (\\lvrt.dll)

  I'm trying to update an instrument running Windows 95.  What is system 31 error?  I can't find anything on this topic using Google or the search function of the forum.

  The instrument is a Romulus-IIIA of the Quad.  Chasing the assistance on their part as well.

  Hi Szandstra,

  See the knowledge base article describing what you see.  Follow the steps there to correct the problem.  Have a great day and let me know if this solution does not work for you!

• ControllerFactory in FXMLLoader not called during the loading of uri

  Im trying to use the method setControllerFactory() FXMLLoader for injection of dependence, but stumbled upon a problem that looks like a bug to me. The controller factory works fine when loading the input stream fxml, but do not get called during the loading of a uri. I wrote a simple unit test to illustrate the issue:
  

  public class FXMLLoaderTest {
  
       private FXMLLoader loader;
  
       @Test
       public void testFXMLFactory() throws IOException {
            FXMLLoader loader = new FXMLLoader();
            Callback<Class<?>, Object> callback = new Callback<Class<?>, Object>() {
                 @Override
                 public Object call(Class<?> aClass) {
                      System.out.println("Controller factory called");
                      return new String("Works");
                 }
            };
            loader.setControllerFactory(callback);
            
            // This makes the test fail
            //Object node = loader.load(getClass().getClassLoader().getResource("controllerTest.fxml"));
            
            // While this works as expected
            Object node = loader.load(getClass().getClassLoader().getResourceAsStream("controllerTest.fxml"));
  
            assertThat(loader.getController(), is(equalTo((Object) "Works")));
       }
  }

  IM using javafx 2.2 shipped with JDK 7u21. Am I missing something or do I have to file an issue for this?

  FXMLLoader.load (URL) is a static method, so your commented line

  Object node = loader.load(getClass().getClassLoader().getResource("controllerTest.fxml"));
  

  is equivalent to (and probably should be written as)

  Object node = FXMLLoader.load(getClass().getClassLoader().getResource("controllerTest.fxml"));
  

  Obviously, the static method is not aware of the controller factory that you set on your instance of FXMLLoader.

  To use a URL with an instance of FXMLLoader, to either pass the URL to the FXMLLoader constructor:

  FXMLLoader loader = new FXMLLoader(getClass().getClassLoader().getResource("controllerTest.fxml"));
  

  method setLocation (...) or:

  FXMLLoader loader = new FXMLLoader();
  loader.setLocation(getClass().getClassLoader().getResource("controllerTest.fxml"));
  

  and then set the same controller factory.

• Animation during the loading of the page

  I just created an animation using Fireworks which, according to the tutorial can be used as entertainment during the loading of the page. What format this file must be in and where do I download it on the server... (someone has a tutorial)... one I used went, step by step, how to do it, but did not operate on the site... Thank you

  "whatisgood" wrote in message
  News:go3jlv$29$1@forums. Macromedia.com...
  > I have just created an animation using Fireworks according to the tutorial
  > can
  > serve animation while the page is loading. What format for this
  > file
  > have need to be and where do I download it on the server... (anyone have one)
  (> tutorial)... one I used went, step by step, how to do it, but does not
  > talk
  > make it all work on the site... Thank you
  >

  Im not that warned with animation in FW, but I'm assuming it would be a
  animated gif format.

  When you turn the image, the actual file or the path is not so much the
  important thing, making sure that you have correctly linked to the image
  destination on the page.
  When you upload to the server, make sure that you keep the file
  structure of your local files. If you use dreamweaver to ftp and you
  have set properly your site in dreamweaver, and then download the image
  your local site files should maintain this structure.

  Hope this is useful

  Concerning
  Fiona

• Network slows down and stops receiving data the halfway during the loading of a site or downloading

  In windows 7, my network slows down and stops at the midway during the download or load of a site with the largest size. When I restart the download, the same problem occurs again. When I use a download manager I have to stop the download and then picks up the part were stopping to download and vice versa in order to finish the rest of the download to complete. This problem is only with windows 7 and windows 7 sp 1.

  Hello

  ·         Did you follow all the methods provided?

  ·         You are using cable or wireless network connection?

  Let us know if you have followed all the steps of troubleshooting mentioned in the previous post, and what were the results, so that we can help you further.

  If you use try of connection through check wireless network and wired network. If a cable that you can try to use a new cable to see if the one you use has problems. If it is I'd see if anyone is leeches wireless turn off your connection. Note If you have more than 1 person on a 300kps connection there is no chance, you're going to both to have that kind of speed with a shared connection, especially if you use a hub, although I do not agree that a decline until 20kps is rare, it would not if someone is hogging the bandwidth of your connection.

  Method 1:

  You can also try to update the latest NIC drivers on the manufacturer's Web site and check if it helps.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Method 2:

  Try to release and renew the IP address, and check if this may help. To release and renew your IP address follow these steps:

  a. open windows command prompt

  b. Click Start - Run-type cmd and press enter

  c. to release your ip address ipconfig/release , press Enter

  d. to renew your ipconfig/renew IP address

• Error opening the page of modal (plugin skillbuilder) during the loading of the page

  Hi all
  
  I use 4.2.1. (on 11 GR 2), theme 25.
  SkillBuilder Modal plugin v2 page
  
  Modal pages are working on all sorts of events, great, but if I try to open the other via a D.A. on loading the page, it fails with ' Eception TypeError: loading of the object has no method 'stopImmediatePropagation""error (in the browser console). "
  < edit >
  just found out that this error is caused by the "cancel event' DA action that should be fired after the modal dialog box open. If I omit this event Cancel modal page is not loaded, but also no error appears.
  < / Change >
  
  Any ideas on how to solve this problem? In the end, I just want to open a modal window after loading the page depending on the value of an item set when loading the page (the branch sets an element value to indicate that the modal window must be open).
  
  
  Concerning
  Bottom
  
  Published by: bottom of Klerk on 2013-apr-11 07:43

  Bottom,

  The modal shows do not charge is actually quite simple. Look at the generated code for the dynamic action and note in particular the code "javascriptFunction":

  {"name":"modal on load","bindEventType":"ready",actionList:[{"eventResult":true,"executeOnPageInit":false,"stopExecutionOnError":true,javascriptFunction:function(){
     if (this.browserEvent !== 'load'){
        apex.jQuery(document).apex_modal_page('openPageFromApexThis', this);
     }
  },"attribute02":"STATIC","attribute03":"f?p=54687:38:115741808752478:::38:::","attribute05":"data-url","attribute06":"div#success-message","attribute07":"AUTO","action":"PLUGIN_COM_SKILLBUILDERS_MODAL_PAGE"}]}];
  

  You can see that there is an explicit for the browserEvent criterion, and it must be different from "load."

  Of course, when you create a dynamic action with type "Page load", the browserevent will be "load", so no popup and no errors. Running a page in debug and research in the javascript console, you can also click through events fired, for example, I have this in the console:

  Dynamic Action Fired: modal on load (PLUGIN_COM_SKILLBUILDERS_MODAL_PAGE) Object { triggeringElement=document, affectedElements=[1], action={...}, more...}
  

  Firebug allows me to click on the object and display its properties. One of them is the "browserEvent" and set to "load".
  This prevents also the modal open when you actually set the real action of pull on the loading of the page.

  I tested a bit after commenting on prevention onload, and while I'm sure there are reasons why it was built in like that, I have immediate problems. The modal open during loading and anything funky happens, not even when you navigate around in the iframe.
  This does not however only if you want the modal to react on the loading of the page that your only option is to change the the plugin plsql code. I would say: test it enough!

  Go to the plugin, change it. Under Source > Code PLSQL find this:

     l_result.javascript_function :=
        'function(){' || l_crlf ||
        '   if (this.browserEvent !== ''load''){' || l_crlf ||
        '      apex.jQuery(document).apex_modal_page(''openPageFromApexThis'', this);' || l_crlf ||
        '   }' || l_crlf ||
        '}';
  

  and change it to this:

     l_result.javascript_function :=
        'function(){' || l_crlf ||
        --'   if (this.browserEvent !== ''load''){' || l_crlf ||
        '      apex.jQuery(document).apex_modal_page(''openPageFromApexThis'', this);' || l_crlf ||
        --'   }' || l_crlf ||
        '}';
  

  As you can see, I only commented those 2 lines, but it should allow the modal to open the loading of the page. I hope this helps you forward a bit.

• I get an error loading online in firefox during the loading of webcams, chrome and IE ok

  Vista Windows

  In the details of your Question > more details of the system, I do not see the plugin Flash player listed. You have it turned off because it was causing problems?

  If you don't turn it off intentionally, could check you if you can reactivate on the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, look for 'Shockwave Flash' who might be down on a gray background. Assuming that it is not a message that he's blocked, you can replace 'never activate' for "Ask to activate" (to give permission to individual sites when you trust him) or 'always' (to allow all websites use Flash automatically).

  If your Flash needs an update, you can get the version 18.0.0.209 on this page:

  https://www.Adobe.com/products/flashplayer/distribution3.html

  In the first table, find the row corresponding to "browser plugin", and you can use either the EXE or the MSI installer.

  To ensure that the old version is removed, please close the tabs that are using Flash, or quit Firefox, during the update.

  If you HAVE problems with Flash, it is a standard orientation that addresses the most common questions. I'm sure you've seen some of it before, but just in case:

  (1) If you have any recorders/downloaders who interact with Flash media to ensure that they are as up-to-date as possible, or disable them temporarily.

  (2) disable hardware acceleration in Flash: right click on the media in the drive and click on settings, then the first mini tab and uncheck the box to use hardware acceleration

  More information in this article from Adobe technical support: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues

  (3) turn off mode protected (Windows Vista and later)

  The functionality of the safe_mode of the Flash player plugin has security benefits, but there seem to be some compatibility issues on some systems. You can disable it using the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, find 'Shockwave Flash' and click on the link for more. Then uncheck the box for "Enable Adobe Flash protected mode" and try it for a day to see if that helps you.

• Phone call during the transfer of data

  Hi, the app I'm developing sends and receives large pieces of data from a server. During data transfer, if I phone the device running the application from the phone call fails to connect. It is only when the application has completed the transfer of data that a phone call can be connected.

  Is there a way to get the phone call to connect?

  The application was developed as a moped based on portability and is executed on a v4.2.1.94 platform 2.3.0.77 Pearl

  The transfer of data should be interrupted by the wireless network to allow the call to come.  Which network see you this on?  I commend this report to the carrier.

• ADF Table retrieves all lines during the loading of the page

  Hello

  We have a requirement where we need run the query programmatically by giving the query column and its value.

  I used the code below in the AMimpl.java and calling this method during the click on the button Search my Search Page.

  I am able to get the features you want on the search page by clicking the search button.

  The question now is when the page initially loads, the table fetches all rows of the VO by default.

  Can you please let me know where I need to change so that the table will get no line on the initial load of the page?

  ' public void setVoParams (String columnName, String columnValue) {}

  ViewObject mapVO = this.getFusionSapMapping1 ();

  String whereClause = "MappingEO." + columnName + "" as: colValue ";"

  mapVO.setWhereClause (whereClause);

  mapVO.defineNamedWhereClauseParam ("colValue", null, null);

  mapVO.setNamedWhereClauseParam ("colValue", columnValue);

  mapVO.executeQuery ();

  }

  Hello

  You don't tell us your version of JDeveloper.

  An easier approach to implement your condition is to use the property refreshCondition of your iterator. Here is an example of how do: https://blogs.oracle.com/shay/entry/delay_method_execution_when_us

  Antonis

• While browsing my iPad 2 turns off a few seconds and the message "a problem occurred during the loading of this page". The page returns in a few seconds. Why and what is the remedy?

  WWhile navigation, my iPad 2 is empty for a few seconds. Web site in seconds. This happens frequently. Very annoying. Why this phenomenon happens and is there anything I can do about it?

  Tap settings > Safari and then tap to clear the history and data from the Web site and then restart your iPad.

• iPhone 6s battery STUCK during the load percentage

  My iPhone 3 weeks 6 s 64 GB had an annoying problem when charging.

  My battery iPhone 6s percentage will stuck if I put loading airplane with screen wide/sleep mode.

  For example when my battery on 41% I plug to the load and activation of the mode plane and then we know that the screen will go to sleep himself (based on my autolock to 1 minute parameter set), after that, for the next 15 minutes, the battery percentage will be showing only still stuck on 41%!

  BUT when I put the always on screen / unlock, the battery percentage will be suddenly updated so very fast! Weird.

  I calibrate the battery, restart, force the reboot, reset to factory settings, clean (no Backup Restore) restore, this problem still exists... I also use the original charger adapter + cable lightning.

  I have this problem since ios 9, 9.1 and 9.2, those recently update does not solve this battery stuck percentage questions about iphone 6s.

  Dose someone at - it had a same questions?

  Please apple, it's very annoying.

  I too have the same question

• Bedside blackBerry 10 during the load mode

  Is there a way to stop the Z10 goes into bedside mode when it is charging, or other for don't delete no notifications in mode night.

  Do not charge my phone at night but during the day when I'm working, but that means that now if I'm in charge the phone my notification are blocked (not even the red flashing LED)

  Thank you. I thought it would automatically to the bedside mode but it gave me just the option.

• Foreign key constraint, not recognized during the synchronization of data with the model dictionary

  Hello

  Data Modeler is a foreign key constraints do not recognize when synchronizing data with the model dictionary, although the foreign key is there (in the database that a data dictionary is read). I can't find any criterion when a foreign key is not recognized by the Data Modeler. Are there limits to the length of the attribute, or the number of columns in a foreign key, or other limitations which may lead to this behavior not to recognize a fk by Data Modeler? I have columns more than 32 characters. I compared with the fk is recognized by DM, but I can't find anything that indicates why it is not recognized.

  I wonder if someone also has constraints of foreign keys that are not recognized in the comparison of data bases and model?

  Thank you

  Robert

  Hi Robert,.

  Thanks for the comments, I logged a bug.

  Philippe