Phone call during the transfer of data

Similar Questions

• Transfer rate slow during the transfer of data on HARD drive

  I tried to solve this problem, but if I found similar questions, I have found no valid solution.

  I transfer files on a windows 8OS my Transcend hard drive. He has connections USB 2.0 and 3.0.

  whenever I try to transfer files on the hard drive, it works very well and quickly up to 5%. As soon as the copy of the file reaches 5%, speed decreases rapidly until it reaches 375 kbps and flows to 0 before returning to 375 kbps, always not to transfer any data whatsoever.

  I tried a few solutions without satisfactory results.

  I tried to transfer files on the pc or the pc itself to check if the problem was on my hard drive also. This is to copy the files fine and good intra-pc, but fails to copy to the hard drive.

  Basically, the computer hangs after completing 5% and stops to copy, although always playing 375 kbps speed, which, even in itself, is too slow...

  kindly give me a solution to this weird problem.

  Former title: slow transfer HDD

  Thank you for your response.

  It has proved to be a slightly different problem, and if you're interested, the problem was something with the interface between the computer and the hard drive via the usb port.

  When I connected the hard drive to the USB behind the cpu, it worked perfectly fine.

  I do not know too well, I understand the problem, but I'm glad that's solved.

  Thank you for your attention.

• Windows 7 hangs during the transfer of data from one drive to another

  This problem was pestering me for a long time, well over a year.

  When I transfer data from one disk to the other (generally large amounts), the computer crashes and I get a blue screen or it just restarts.

  Initially, I thought it was a faulty hard drive, so I replaced that, but the problem persisted. I ran diagnostics of smart drive on all my drives and no problems have been picked up.

  Then I replaced my RAM assuming there that all. The problem continues.

  Then I replaced the video card. The same problem.

  I then upgraded to windows 10 and the problem became more acute, so I rolled back to windows 7.

  The SSD has the latest firmware, the latest graphics card drivers.

  I think now it is one of the following two issues:

  Either my SSD drive that contains the operating system or motherboard?

  Someone at - it ideas of how to diagnose precisely this problem or how to solve it? Would contribute to a new facility?

  PC: Windows 7 SP1, AMD Phenom II X 4 965, Kingston 16 GB 1866 MHz DDR3 Non - ECC CL9 DIMM (Kit of 4) XMP beast series - HX318C9T3K4/16, AMD Radeon (TM) R9 series 200, Asus M4A87TD/USB3 motherboard

  Pilot, verified and associated usbfilter.sys from Advanced Micro Devices Inc. USB filter driver.

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  Also and important you need to update this driver since 2005.  It is a known problem in win 7 (ASACPI.sys)

  Pre 2009 this driver version is a known cause of BSOD.
  
  Please visit Asus tek computer Inc. - support - drivers and download p7p55d the
  http://support.ASUS.com/download.aspx?SLanguage=en&m=P7P55D%20Le&p=1&s=32&OS=29&hashedid=e7zic83pvqsr80lm

  Scroll to the utility category, then scroll down to the "atk0110 driver for Windows XP/vista/windows 7 32 & 64-bit" (it is about 12 down).
  Download and install it.

  Go to c:\windows\system32\drivers to check and make sure that the file asacpi.sys is stamped 2009 or 2010 (not before).  If you are using Win 8 there are at least a 2012 version that is needed for this.  If you can't find it on the site of ASUS you can download using windows update.  Read about it here

• Satellite Pro A110 crashes during the transfer of the large data in LAN

  Hello

  My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

  Thanks in advance

  Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

  Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?

• Make/receive phone calls via the software modem?

  It is usually possible to make and receive calls through a PC modem such as the software modem for satellite P25 series?
  I need any additional software to do this? (this is not about VOIP).

  Hello

  I'm not sure what you mean exactly. You want to make a phone call over the internet?
  I put t know which device you have, but I think that it s must support a modem.
  You can use this modem to connect to the internet, but believe me; the modem connection is not very fast and the transfer of data has for a long time.

  I think the phone call over the internet is a very good idea but only if someone has a lump and a broadband connection.

• Cannot make or receive phone calls after the upgrade to iOS 9.3

  Can't scream: cannot make or receive phone calls after the upgrade to iOS 9.3

  SOLVED

  Went into settings,

  Cell phone,

  Cellular data options,

  then change the setting to EnableLTE OFF,

  It's for my at & t att, iphone 6 s

  No joy for me.  I can't make calls, but I can not receive or use call forwarding.  So frustrating!

• I have a G4 and the transfer of data to an I mac?

  I have a G4 and the transfer of data to an I mac? There is no port Firewire on the Imac A1418

  Use a FireWire 800 adapter Thunderbolt and if necessary, an adapter FireWire 400 and 800. If you wish, you can use a network or external drive instead.

  (142220)

• NB100 restarts during the transfer of files and others

  Hi, there are some problems, I've had this days with my NB100:

  (1) blocking during the transfer of file with scp-online HW reboot. Seems to be a bug in driver wifi...
  (2) no way to restore my system after hibernation-online HW restart
  (3) Toshiba function auto zoom turned on sometimes when I come back just when the screen saver starts.

  In any case, it's a good NetBook, and it's really nice to see that ubuntu pre-installed on a Toshiba computer.

  Hello

  I noticed that Toshiba has offered some BIOS updates for similar problems.
  Have you checked Toshiba support page on the BIOS update?

• got the new ipad. during the transfer of applications, some are dark. Why?

  got the new ipad. during the transfer of applications, some are dark. Why?

  All applications are probably install and not finished yet. Make sure you are connected to a wireless network and let it enabled applications can continue to have downloaded and installed.

• SBH52 don't make phone calls after the installation of Marshmallow

  Hello

  I upgraded my Z3C Marshmallow Android and since then, the SBH52 does not allow me to make phone calls from the call log.

  I had similar behavior original lollipop but discovered "Call Log Smart Extras" had to be installed and the problem solved.

  However, after upgrading to the marshmallow and noting that I couldn't dial from the SBH52, I uninstalled and reinstalled Smart Connect, SBH52 app and Call Log Smart Extras but everything remains the same. I also tried disconnection and reconnection of the headset to the phone, both via NFC and Bluetooth.

  The headset works. I can 'throw' music, audio, videos and maintain telephone conversations. I can also access the call log and read SMS.

  If I want to hang up, I can still do it by pressing the big round button on the front of the helmet, so my problem is not this one:

  http://talk.sonymobile.com/T5/wireless-accessories/SBH-52-on-Android-6/m-p/1051004#M7193

  Everyone found this problem too? Is there a solution?

  Thank you.

  I wonder there was an update for applications, but resumed making phonecalls through SBH52

• Warning message to turn off "Are you sure that you want to copy this file/folder without its properties" message during the transfer of files and folders on network file servers? »

  Original title: Annoying message of loss of property

  Win7pro x 64 here.

  Is there a way to disable this annoying message "Are you sure you want to copy this file/folder without its properties" during the transfer of files and folders in all of network file servers?

  Pokermon salvation,

  It would be better if post you this question in the forum category below where this problem is related to Windows server 2003.

  Windows Server forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  If all goes well, they will be able to solve this problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• With the help of the network location and mapped a drive to the server FTP. during the transfer of very large amounts of the login information is always lost.

  With the help of the network location and mapped a drive to the server FTP off site; during the transfer of very large amounts of the login information is always lost.  Computer power settings are configured to not to do no matter what, I'm assuming that the ftp server can publish a scenerio timeout but is there a way for my computer and windows to restart the file transfer?

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with networking on the FTP server.

  The question you posted would be better suited in the Technet Forums. I would post the query in the link below.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• Phone calls from the India saying my computer sends messages it has smart software.

  I get phone calls from the India saying that my computer sends messages it has smart software.  Is it a scam?

  Or-
  Next time have an air horn next to your phone and just before giving them a breath
  say "the smart software makes a sound of '...
  Or perhaps softer and say "because I had so many calls that I have."
  asked the FBI/CIA (MI6, or similar) in cooperation with the Government of your
  beautiful country to tap my phone... ».

  .

• ControllerFactory in FXMLLoader not called during the loading of uri

  Im trying to use the method setControllerFactory() FXMLLoader for injection of dependence, but stumbled upon a problem that looks like a bug to me. The controller factory works fine when loading the input stream fxml, but do not get called during the loading of a uri. I wrote a simple unit test to illustrate the issue:
  

  public class FXMLLoaderTest {
  
       private FXMLLoader loader;
  
       @Test
       public void testFXMLFactory() throws IOException {
            FXMLLoader loader = new FXMLLoader();
            Callback<Class<?>, Object> callback = new Callback<Class<?>, Object>() {
                 @Override
                 public Object call(Class<?> aClass) {
                      System.out.println("Controller factory called");
                      return new String("Works");
                 }
            };
            loader.setControllerFactory(callback);
            
            // This makes the test fail
            //Object node = loader.load(getClass().getClassLoader().getResource("controllerTest.fxml"));
            
            // While this works as expected
            Object node = loader.load(getClass().getClassLoader().getResourceAsStream("controllerTest.fxml"));
  
            assertThat(loader.getController(), is(equalTo((Object) "Works")));
       }
  }

  IM using javafx 2.2 shipped with JDK 7u21. Am I missing something or do I have to file an issue for this?

  FXMLLoader.load (URL) is a static method, so your commented line

  Object node = loader.load(getClass().getClassLoader().getResource("controllerTest.fxml"));
  

  is equivalent to (and probably should be written as)

  Object node = FXMLLoader.load(getClass().getClassLoader().getResource("controllerTest.fxml"));
  

  Obviously, the static method is not aware of the controller factory that you set on your instance of FXMLLoader.

  To use a URL with an instance of FXMLLoader, to either pass the URL to the FXMLLoader constructor:

  FXMLLoader loader = new FXMLLoader(getClass().getClassLoader().getResource("controllerTest.fxml"));
  

  method setLocation (...) or:

  FXMLLoader loader = new FXMLLoader();
  loader.setLocation(getClass().getClassLoader().getResource("controllerTest.fxml"));
  

  and then set the same controller factory.

• Reg apply log archiving after the transfer of data files

  Hi all
  
  That I reinstalled the main server of the D-Drive E-reader data files using the command line.

  C:\>Move <source_path> <destination_path>

  The redo logs for the move operation will apply on the eve of the database?
  In addition, what happens if the data files are moved manually in the primary database (i.e. without using the command prompt)?
  
  
  Thank you
  Madhu

  See this doc. Keyword search Rename a data file in the primary database

  http://docs.Oracle.com/CD/B28359_01/server.111/b28294/manage_ps.htm#i1034172

  Also, you need to update primary database controlfile if some moment of the file made...

  And also close this thread

  Reg apply log archiving after the transfer of data files

  As it would help in the forum of maintenance to clean.