Dv5-1110em downgrade XP SATA drivers

Similar Questions

• Downgrade to XP (CQ61-403SA) - ask for other Sata drivers

  > When AMD Sata drivers that are presented in the guide not work for then start you ' new message ' on our forum to ask some other drivers Sata for this chipset. Please write there what drivers you used and give information out there about your p/n too.

  Hello

  I'm trying to downgrade my CompaQ CQ61-403SA to XP in order to use a piece of software that we use in the office which is XP only.

  I followed the instructions here to create a disc to start xp for my AMD chipset:

  http://h30434.www3.HP.com/T5/operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x000000...

  the problem is that the laptop won't boot from this drive (I reorganized the sequence of boot on the computer laptop. it will say "Press any key to boot from the CD"... and when I do it will pass temporarily to a CompaQ red screen before coming back to the same message "Press any key to boot from CD")

  additional information in the CPU - Z program:

  Motherboard:

  Hewlett-Packard

  Model:

  363 42,15

  Chipset: AMD 785GX Rev:00

  Southbridge: AMD ID439D

  BIOS:

  Version: F.13

  Date: 25/01/2010

  Any help would be appreciated.

  1. In Nlite, choose Insert -> multiple driver folder option
  2. Select ONLY x 86 driver for AMD SATA AHCI when asked if you are using a windows xp 32-bit cd
  3. Never choose x 64 driver when asked if youre 32-bit installation cd...

  Click on the star to say thank you...

  Click on accept as solution if my answer has solved your problem

• Impossible to downgrade Satellite L305-S5957 for XP with integrated SATA drivers

  Hey everybody. You just bought a L305-S5957 today with preinstalled Vista. I tried to install it on XP with the drivers slipstreamed SATA, but it doesn't seem to work. I always get a BSOD after everything loads.

  I am trying to install the version of XP is Chinese simplified XP with SP3. I tried to "slipstreaming" twice using two different SATA drivers with nLite: v8.9.1023 (last ones on the Intel site) & v8.0.0.1039 (those available on the Toshiba site for my model). Both times by selecting the appropriate chipset (ICH8-M & variants) for integration.

  However, two SATA drivers not and don't seem to not work. What happened after that pilots of trying to load during the installation of XP, I get a BSOD. The BSOD reads: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000). It seems to be the typical BSOD due to the failure to load the SATA drivers for AHCI mode.

  So, what suggestions guys do you have? Should I eventually use "(IDE) compatibility" mode in the BIOS instead of AHCI?

  I really have no idea why it does not work. Many models in the past, I have integrated SATA drivers successfully. It gives me a hard time.

  Thank you.

  Hello

  I guess you used the Toshiba page for download.
  I took a look on the US page and found the Intel Robson Technology Driver for Windows XP (v8.0.0.1039, 31/10/2008; 22 M) and the installation tool XP F6 ACHI (v8.0.0.1039, 2008-10-31, 230 K)

  What have you tried?

  As I know that Intel Robson is a complete package that contains the SATA drivers as well but the F6 ACHI XP installation tool should contain the same files.

  However, you should compare the files in both packages!

  Usually the installation of Win XP using settings AHCI and SATA drivers should always work but of course, you could install Win XP using compatibility mode without the integration of the SATA driver.

  PS: maybe you can try to install Win XP in compatible mode. Then after installing XP, try to install the package Intel Robson and opt for the AHCI mode after that I have not very good if it will work but it s m worth a try!

• Need SATA drivers to install Windows XP Home on my Tecra A8

  I want to downgrade my A8 - 103 to Win XP, but probably will need SATA drivers (and floppy) when installing (F6), but can't find where to download the SATA/RAID drivers for my model?

  Hello

  To my knowledge that the Tecra A8 does not support RAID.
  It supports the interface ATA (SATA) series.
  But these drivers do not exist on the page of Toshiba. The operating system should include the Sata drivers or you'll get it on the Intel page.

  The XP must support all service packs. If your XP includes all the patches and SP, you can create a bootable CD of windows with an application called nLite. Check it!

• SATA drivers for computer laptop compaq CQ45-205Au

  Hello

  I had searched for sata drivers for my computer compaq laptop CQ45-205au but I couldn't find a definitive solution,

  can someone help me pls how to solve this problem I want to install XP on my system

  If you are looking for the SATA drivers for your model, I suggest that return you the document of HP ' problems with SATA drivers when downgrading from Vista to XP "accessible from the following link:

  http://support.HP.com/us-en/document/c01675438

  You can even try to download the SATA drivers from the following link:

  http://rapidshare.de/files/39258861/Intel_8.0.0.1039.rar.html

• Re: Satellite L300 - how to reinstall the SATA drivers?

  Hi all

  I have a L300 I downgraded to XP. It runs with the SATA controller in compatibility mode and are sent here a lot, it's slow.

  I read you need drivers intel for her and so I downloaded the and down them and had an error "your computer does not minimum requirements.

  Tried in both safe mode and got the same error.

  Now I could try to use nlite and I've used it before, but the file I have is an executable and not an inf and files related to a driver, so I don't know how to add it to nlite. I'd rather do not re - load again if possible.

  So the simple question is how I install the AHCI SATA drivers so I don't have to run in compatibility mode.

  Thank you

  Mick

  Hello

  I think that you should use the forum search. You will find the sufficient number of threads how to install SATA drivers

  In addition this s one interesting article step by step:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• HP Pavilion a1587c sata drivers?

  Where could I get sata drivers for this PC? It came with Vista installed it does not start right now and I want to downgrade to XP, but I can not install XP on the Sata drives, and I need some drivers. XP is purchased legally, if that makes a difference.

  Message edited by 123dfsa on 01/28/2009 17:19

  If the full version of XP

  You should be able to install

  the best way I've done is put the drive and restart the computer

  not from the prompt when you on the desktop

  Once you restart the computer

  do a format and it will erase the hard drive and you should be able

  to install XP on a clean slate

  Once you get to go to XP and running only the MsUpdate and you

  you will need to validate your window to get the updates from microsoft

  and then get your update of HP as the model of your computer

  It has the drivers and software updates

  I hope the shop gave you your vista disc if you ever want to

  running Vista because vista is registered and the disc they use

  a code key engraved and this same computer you bought

  Good luck

• blue screens win7 for XP sp2 p6624y decommissioning prior to loading. need sata drivers? Help

  Hi I'm downgrading my p6624y of Windows 7 for XP sp2.  When completed the installation of the drivers of blue screens.  I think I need SATA drivers for this system.  If you have links for other drivers please let me know.  Need to get there soon.  Many need help...

  Try to set the hard disk controller in the bios in IDE mode.

• SATA drivers to install XP Pro on HP630 via diskette (F6 at startup)

  I have a laptop HP630 with SUSE OS installed. I want to install XP Pro but I don't know where to find the SATA drivers for installation via floppy with the F6 key at the start of the Installation of XP. Where can I find them?

  Renato

  Ciao, Renato:

  You can get them at the link below: XP 32 bit is the second listed download.

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 2991 & DwnldID = 20625 & ProductFamily = Chipsets & ProductLine = Chipsets + Laptop & ProductProduct = Mobile+ Intel % c2% ae + 4 + Series + Express + Chipset + Family & lang = eng

  When you are prompted to install the driver, use your up/down arrow and scroll to select and install the Intel (r) Mobile Express Chipset SATA AHCI Controller.

  Paul

• Satellite P100-188: recovery CD will install the SATA drivers on a blank HARD drive

  I was wondering if someone could tell me if my recovery disk would be automatically installs the drivers for SATA HDD on my P100-188, in the case of a hard drive failure total without needing a floppy drive.

  I've never had to use my recovery disc (touch wood), but I have the impression that it works in conjunction with a hidden partition on the hard drive in order to reinstall the operating system if and when necessary, I am not mistaken? If I'm so what happens if the hard drive is destroyed and a new disk? A

  s Windows is not integrated SATA drivers I've read on the Internet that would stop dead in its tracks installation if you do not have a diskette at hand drive.

  Someone had to deal with this problem?

  Hello

  Yes, the restore CD installs everything you need in a single step.

  The point is that the Toshiba Recovery CD is not the same as an original CD of MS Windows. The restore CD contains an image. It s a Pack that included OS Win, Toshiba drivers, utilities and software tools extra.

  So, using the CD recovery will install all the applications mentioned, as well as the SATA drivers ;)

  Welcome them

• Satellite L100 - need SATA drivers to install Win XP

  Hello world!

  I need your help... This is my story.

  There was a time when I need to reformat the computer laptop satellite L100 and a XP cd is used instead the recovery disc, I'm too dense to know.
  When I found out about the use of the recovery disc, I tried to boot from it, and I've seen the menu which gives me the chance to restore the configuration of the laptop, but I didn't move because I didn't really need to reformat the way at the time.

  After a while, (again), I need to reformat, but the problem is, claims the installation from the toshiba raid recovery disk drivers.
  That's happened? and what do I do?

  I have read a few forums and they propose to change the SATA mode in the BIOS options, but I can't find it in the laptop, you I saw in the other computer toshiba laptop. How can I change the SATA mode in the L100 laptop?

  I also read that I have raid drivers must be copied to a floppy disk, in which I don't have an external floppy drive.
  Is it possible that I can install it without pressing F6 or something, which is on the Windows desktop? Or I can save it on a USB flash drive?

  Thank you!

  Hello

  First the SATA mode option is not available in the L100 BIOS, so you cannot change this mode compatible.

  Secondly, you n t need the floppy drive to install the SATA drivers.
  If you had read several threads here you would like to know that you can also use the software called nLite that would help you to integrate the SATA drivers into Win XP.
  This application creates the new Win XP with SATA drivers, and you can use this CD to reinstall windows XP.

  I wonder why the Intel Storage Manager was not placed on the page of the European driver Toshiba in the region however, L100 driver download as mentioned, the Intel Matrix Storage Manager contains the SATA drivers and you need this package.

  You can search in other series of laptops such as the Intel Storage Manager or looking for on Intel page and it would download.
  Then as I ve mentioned use the nLite and include the SATA drivers.

  More details about nLite you will find on the page of nLite: http://www.nliteos.com/

  Good bye

• Equium L40-14i - where to find the SATA drivers?

  Can someone tell me where I can get the SATA drivers to allow me to install Windows XP on the machine? I scoured the net, but I can't find anything definitave. I managed to find a few ece files, but windows will not let me check out them!

  Please help other wise, this laptop is out the window!

  Thank you guys

  Martyn

  Hi MartynB_1,

  The SATA drivers, you can download on the official website of Toshiba and the driver is called Intel Storage Manager.
  But you must extract the files first until you can use them.

  Here's an interesting article on this subject:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• Satellite L350 - 16L: could not find the SATA drivers to install Win XP Pro?

  I want to install XP Pro.
  Can not find a driver for a SATA drive. nLite will incorporate into xp driver SATA and install XP and then install any driver and the program.
  You will connect to the SATA driver, please

  I don't know who is right.

  Thank you

  Post edited by: splicanin

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=39465

  Jimi posted a link to the worm: 8.6.0.1007 Intel Matrix Storage Manager, which includes the necessary SATA drivers!

  Good bye

• Tecra M9 - SATA drivers needed

  Hello

  I am trying to install Winxp on my M9... it requires other drivers to recognize the HD (sata Drivers) does anyone know where to find them, I tried intel site and this site... TA

  Hafk

  You need to search the Intel Matrix Storage Manager or the packaging of Robson.

  See the European driver Toshiba page!

• How to load the SATA drivers during the installation of XP - Satellite L40-18 X?

  Hello

  I have Toshiba Satellite L40-18 X with Vista Home OS. Now, I want to install Windows XP, I know that I have to reinstall the SATA drivers, but I can't find USB-drive floppy-disk drive.

  I was wondering can I install these drivers of some other player, like a flash drive or external CD ROM

  Thanks in advance

  Hello!

  There are two options to load the SATA drivers.

  As you know to load from a floppy drive, but if you n t have one, this isn't a problem.

  Create your own Windows disk with nLite. nLite is a tool of suppression of configuration and Windows components before installation of your choice, but you can also integrate drivers, service packs, the settings and to this day.
  It s a very nice tool and its freeware.
  Here you can download and read how to create a disk:
  http://www.nliteos.com/

  Good bye