dv5-1150us don't start

I recently installed a windows vista service pack 2 update on my laptop, and once it was full I had to reboot my computer for updates of kick.  When restarting, my cell phone was on stage 2 of 3 to complete the installation of update for the death of my computer's battery.  Now when you start the computer I can't retrieve or restore my laptop and when I try to start windows normally it's a black screen with the following on this subject:

!! 0xc0000034! 179/80356 (_0000000000000000.cdf - ms)

You are not sure if that helps or means something in particular, but is there something I can do myself to fix the problem or it will have to be repaired by HP?  Thanks in advance for any help.

Hello

As you install Vista, this process will allow you to do a Vista repair disc. This isn't an installation disc, but will allow you to use the Vista Recovery Console that is available on commercial versions of Vista.

Download the file from the link below.  Make sure you download the correct version.

Vista 32 bit

Vista 64-bit

It is a zipped file.  If you do not have an extraction utility installed, download and install 7 - Zip, which can be used to open this file.  Simply right-click on the zipped file, select 7-Zip, select extract files and then click Ok.  You should now see another folder containing the ISO file.

You will need software to burn the ISO to a CD.  If you don't have that guy on the software installed, download and install ImgBurn and use it to burn the ISO to a CD.

Once you have created the Vista repair disk, follow the guide on the link below to see if it will repair your installation.

http://www.bleepingcomputer.com/tutorials/tutorial148.html#

Best wishes

DP - K

Tags: Notebooks

Similar Questions

  • My sew creative adobe keeps telling me to renew my subscription but I did not renew until dec 7 2015 because of this that I don't start in photoshop or illustrator

    My sew creative adobe keeps telling me to renew my subscription but I did not renew until dec 7 2015 because of this that I don't start in photoshop or illustrator

    When you say that you need to renew, I'm not quite sure what is the message you get. If the suggestions below do not cover, please indicate the specific message you see.

    If you are prompted for a serial number in the creative clouds,

    See this link:https://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html

    If you open an application that belongs to your creative cloud membership and you see a message indicating that you are running a trial, please see this link: why the app launched in Trial mode?

    Guinot

  • Lightroom CC Don t start... What can I do?

    I ve installed the app from cc in lightroom. It is displayed correctly in my cloud. I start it and the start screen is displayed for one second. Then, it will be lost and start the app Don t. I start the cloud... I sign out and sign in a few times... but he Don t start. I use an iMac with 10.9.5 in 64bit_mode... What can I do? Help, please...

    (1) right-click on the icon in the Finder, then select 'Go - To' folder.
    (2) you will get a text box, type in the following command and then press the 'return '.

    / Library

    (3) then navigate to Application Support > Adobe.

    (Note: If you have an older version Apps like 5 CS, CS 4, make sure that you have the serial number to activate again before next steps below)

    Under Adobe folder locate the folder named SLCache , open it and trash the contents of it.

    Under the same folder Adobe, navigate to the SLStore folder and rename it to old SLStore.

    Then try to launch LR CC 2015 in list of Apps in the cloud creative desktop application.

  • Why the installation don't start after the message "installation wants to make changes?

    Why the installation don't start after the message "installation wants to make changes.  Type your password for this? »

    Hello

    He wants the password to your system administrator. Standard procedure on Mac for non-admin users

    Thank you

  • Don't start looking at the installer

    After clicking on the setup of a pack of Microsoft Office 365, I downloaded, a narrow small window pops up telling me that my Mac will start to check the installation program. However, there is no progress showing in the progress bar, even after more than half an hour. I already checked my security settings, change the settings of "Mac App Store and checked the developers ' to 'the developers' and such, but which did not help either. For some reason, I think that the problem is not related with the installation program itself, but with the computer, but I could be wrong. I really don't know what to do at this point.

    Installation program does not start same checking

    Stop

    Disconnect all external devices

    start in safe mode

    Try safe mode if your Mac does not end commissioning - Apple Support

    Run the Setup program

    When it's finished close again and reattach devices, then start-up and start normally.

    MS is a developer identified, so you shouldn't have to degrade your goalie.

    But if you run a party Mac anti-virus utility or a 3rd that "cleans", "canned" or "cookies" on your mac (or any other claim) you must remove them according to the instructions of developers on their respective Web sites.

  • I have messed up BIG-TIME Safari (OS 10.95).  Don't start now.  Help!

    I upgraded from 10.85 - > 10.95 (Mavericks).   After you have applied all the updates on the App store, a few sites indicated that the Safari V7.0.4 was outdated or is no longer supported.  CNET and a few other sites had a V8 that they argued would work with 10.95.  FAKE!  (Wish Apple website still had Safari for individual downloads).

    I kept the original Safari by duplicating it, then installed this V8.  The V8 Safari announces it is to 10.10 and has the emblem 'no way '.   The old Safari bounces once and won't launch.  Cannot ignore the V8 and cemetery does not remove it.   So now there is "original Safari" and "Safari" (which does not).  Warrior of disc OK, repair the permissions.  No help. Or Safari will launch.

    Why is not start the original Safari?   How can this be repaired?  Reinstall 10.95?   Installation disc root user to remove both versions, an application to extract only the original version of OS 10.95 10.95 Safari?   Clone on the 24-hour and re-setting 10.85 at 10.95 level?  (I could clone this faulty software before doing anything).  Safari does not work because it is called Safari Original and a folder in the Applications folder?  It cannot be moved to the App folder because it already exists in the wrong version.

    Given these two versions in the App folder, if a simple re-install of 10.95 is made, how do I reinstall it know how to deal with these two copies of Safari app.  Guess I could try to reinstall the disk internal after cloning and if this does not work, do what might be the best bet: Clone this 10.95, and then make sure that the copy of the clone of 10,85 has integrity, then erase the SSD internal flash drive, clone through the 10.85, and then reapply the updates.  Few records have been made on Player 10.95 can be copied to the internal drive redone finder.

    In previous years, two versions of Safari could coexist and work.

    Help!

    One, you downloaded something of a global download site, which you never do.  Only download applications or plugins or extensions from the Web site or the Gallery of Extensions Mac App Store/Safari.  That's all.  That's all.  Two, Safari is related to OS X and cannot be downloaded separately, uninstalled or reinstalled separately.  Three, you can either reinstall the operating system using Internet recovery or you can restore your system from a backup Time Machine/clone that has been done before you do what it is that you have done that you should not have done.

    The reason why you got the original message that Safari has been exceeded, it is that some Web sites, including banking Web sites, requires the latest version of Safari, which is 9.0.3.  Your option should then have to upgrade to El Capitan, or if you do not want to do this, download a different browser like Firefox, which can be updated independent of the operating system and is always the most recent version, no matter what operating system you are running.

  • Satellite M30 don't start more

    Hello

    My Satellite M30 wont start... when I press the power button, the power led lights up, the cd light will blink once and then nothing happens...

    can certain a plez point me in the direction of Scripture?

    Help, please!
    thanx

    Cheerz

    Hello

    You know, without any of the detailed tests we can only suggest what might be wrong.
    I think there must certainly be a hardware problem because I guess that you can not see the start screen for Toshiba at the beginning of the startup procedure.

    It might be something wrong with the motherboard. I put t don't know if this helps but try to remove the power supply and the laptop AC adapter for several times. After 10-15 minutes, you could put the power supply in the notebook and connect the power adapter. Try to start.

    But if it doesn't help then in my opinion, a technician must check the device.
    Sorry for this general suggestion but I think it's the best way to know what's wrong.

  • The screen is blank and Satellite L45-S7423 don't start

    I bought a notebook L45-S7423 Toshiba in January 08 and had no problems with it what so ever, until I tried to connect it to my TV Toshiba 37 ".
    When I did so the tv display would start the laptop and when he got to the display of the desktop, wallpaper etc... It was only in black, so I went into the BIOS setup and choose one of the options (I can't remember which) to try to get a factory reset think that the laptop was not recognizing TV, then I don't know what happened.

    When I turn the power on the screen is black and nothing happens, the CD/DVD drive lights and the power button lights up but monitor lights are dead, the hard drive light is also dead. The battery is charged (at least his indicator is green)
    I tried to put the recovery disk in which I received with it but can not get something to happen, it just seems to be sitting dormant.

    Is - this repairable or it of over or what can I do with that could sort.

    Can someone help me get my new computer running again?

    Hello

    Reading your post I thought that you simply switched the standard for external display view... and so you are not able to see anything on the screen of laptop computers... but to be honest, it's very strange because you should see the home Toshiba on the internal display screen and then the display should move to the external monitor or TV...

    So finally, I think that it is a hardware problem... But it is really not easy to say what exactly is the problem... Maybe it's a misfortune and a dieda motherboard? ¦

    If you are not able to boot from the recovery CD and the laptop does not answer, then you must contact the ASP in your country for assistance.

    Good bye

  • Don't start Qosmio F30-140

    My Qosmio F30-140 recently stopped booting.
    When I press the power button, the light (bottom) to show that it s on turns green, but the screen is just blank. It does not and I have finally to maintain the power for a few seconds to killswitch button.
    Sometimes, I hear the fan starts to spin very hard. I tried to fix it by removing the hard drive and put it in another one of my computers laptops and reformatted using the recovery disk.
    Then I put back it in the Qosmio F30-140, but it still does not work.

    Can someone help me with this? Is also someone else having similar problems like this?
    Any help will be appreciated.

    Thank you

    I don't think not described issue has something to do with the HARD drive. If you don't see anything on the screen, it must be a serious hardware problem with chip BIOS, CPU, graphics card or who knows what else.

    I'm afraid, only solution for you is service. Contact the nearest authorized maintainer to check your laptop.

  • HP Pavillion DV5-1234SE does not start after the HP splash screen

    I have a HP Pavilion DV5-1234SE, which will not load Windows.

    It worked very well, I have stop him - and when I tried to start the next time, be put in place - but will only pass the first black screen with the HP logo. I'm trying to access the start menu, and tried to start in safe mode - but it will not go beyond the black HP screen.

    Any suggestions?

    Thanks for the suggestion. I ended up taking to someone and it turns out that the motherboard is fried. (Greaaat!)

    Rather than waste $350,00 replacing I'm just going to get a new laptop (not HP).

  • New Nuisance-don't start can not get rid of

    About two weeks ago, something new has appeared on my screen while booting (starting).  It's one of these screens for approval, asking if I would allow some programs can visit his profile (or modify) to my computer.  I have attached a picture for you to watch; However, it is basically said above "User account settings command" followed by "a tool to facilitate the development of services for Windows NT", ending with verified Publisher "Microsoft Windows".  My first question: is this form legitimate and how can I get rid of him.  For the record, I always click 'No' and it disappears.  I have nothing to do with Windows NT that I am running on Windows 7.  I tried to go in msconfig.exe to see if I can spot a start activity that may be relevant; I can't find anything even by looking at the Control Panel programs and features that may be relevant; again I don't find anything.  Although I only classify this problem as a nuisance, I'm tired to see.  Help... Any ideas?

    HA! Your suggested link solves the problem.  Thank you.  What I discovered, it was all antivirus suggestions did not help; However, a comment many done people captured my attention.  Most argued that what happened just after the installation or to top Garmin Express.  A few weeks before the flight on our Thanksgiving trip, I did an update Garmin Express which included also the download of new maps for the United States I am so now gone in msconfig.exe and unchecked Garmin Express in the startup list, and of course the problem disappeared.  The problem is Garmin Express.

  • BlackBerry smartphone BlackBerry Bold 9900 don't start

    Hello

    So it'll be a long message, sorry about that. Bear with me as I don't know much on blackberry (being an android user).

    Good so I have a BB 9900 BOLD, or as a matter of fact, he is my father.

    It got stuck once it has installed a "traffic software" downloaded from the BlackBerry store (or whatever it's called), he said. He couldn't give me the name if (darn users ).

    Phone used for said mistake soft 200 on starting and stuck there. We also got an error 600 or 606 (do not remember well). Could not start and itwouldn can't accept the password then occasionally he offered us to do.

    He tried to reset the phone, as explains it the support site (type 10 wrong passwords and other things), but it won't do any good. It all seemed pretty broken anyway because at the start it said try password: 2/10 or 4/10 without having even tried us it before...

    And BB Office would not allow us in... don't list software or anything like that.

    Asked a friend at work that is being developed on BB, it couldn't get much better than us, despite trying to plant, reset the unit.

    Removing the battery did not much good, soft reboot either. I saw on the internet that by pressing "DEL" when booting was something... Well this isn't (or I did wrong).

    Given that our computers at work are limited by the proxy settings, we thought that the BB desktop software could not download a random update that may have been needed to put things in their place.

    Finally after installing the BB software on my own computer, I could reset and verify a full software reset. I also did a wipe of data before going to that much too.

    Here's where I found myself and now I am really stuck:

    1 / start
    offers me to start the phone by configuring it, either with SIM on no SIM card.

    I say that I'm not a SIM card.

    He said his will show me some video instruction... nothing happens

    the I get to a screen "blackberry platform 5.0.0.496" titled, with a "eception exception: java.lang.nullpointerException.

    Press ok

    Some "clock / hourglass" appears, I am told is that the garbage collector to run or something.

    Presents itself... MUCH like every 2 seconds.

    Press ok until nullpointer disappears

    Gives me another error:

    application registry.waitFor (0xbfca09409ffe99e5) timeout

    Then after pressing ok returns to the previous java.lang.NullPointerException and then stay like this for always.

    If I insist wrong on the 'OK' button, it will eventually get to

    "applicationregistry.getOrWaitFor (0x3826bb0c1bc02022) owner died thread [thread-262253568, 5].

    In the background, I can still see what I think, it's a list of currently available software:

    (highlighted): AddressBook
    CLA...
    AltP...
    AltR...
    AltV...
    AltV...
    BlackBerry Protect?
    BrickBreaker

    the trees those being hidden by the popup error... for the rest well I can't scroll down.

    What can I do all this?

    Thank you all for your help and ideas to solve this problem.

    See the link below to download it and follow these simple instructions.

    Download the OS here:

    https://swdownloads.BlackBerry.com/downloads/contactFormPreload.do?code=8B6A80C3CF2CBD5F967063618DC5...

    1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
    2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
    3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  • Don't start bridge

    Hello.

    Can someone help me?

    Do not start my bridge. Everytime I open it it suddenly appear a window with the following report: "ended unexpectedly '

    Apple MacBook Pro

    Mac OSX 10.11.5

    Adobe Bridge CC (11948)

    What have I done now:

    • Reinstall

    • Reinstall as a new user

    • Open with open FontExplorer, a firm

    • open without any other application

    Nothing helps.

    someone at - it a response?

    Kind regard

    Christoph

    Hi Christoph,

    We released a new version of THE bridge bridge CC 2015 July 19, 2016. Please install from your application client creative cloud and check if the problem persists.

    If bridge CC 2015 does not appear under the applications Panel, click the gear icon and select 'Search app updates' or sign out and sign back to the creative cloud desktop application.

    Kind regards

    Gerard

  • Download Assistant - don't start to download.

    I opened the download wizard, choose photoshop CS6, choose the location where it needs to be downloaded, then nothing happens.

    Help, please.

    OK, so as long as you don't choose c: Program files as the location, it will start to download.

  • Don't start Yosemite download store / sold

    I lost my image download Yosemite for a clean installation file. I went to the app store / bought, where my two El Capitan and Yosemite are listed for download. When you press the bottom of download on any of those, I get a wheel turn icon, but the download does not start. I installed El own, Captan, without files in my download files / trash and no external HARD drive connected. I looked for alternatives, but nothing helped.

    Try resetting the App Store and the deletion of Cookies.

    Reset       Taken from old Toad

Maybe you are looking for

  • Spreadsheet Numbers - automatic reformatting

    In my spreadsheet Numbers, I want to '7.9 sec' in the cell (without the quotes), but numbers guard converted '7s 900ms.  How to stop the conversion of the format automatically numbers?

  • Libretto U100: an alternative to caps lock

    Several people including me have already validated ways to disable the Caps Lock key on the booklet. But I recently discovered "CapsUnlock" and I think it's the best so far. If like me, you always tend to press Caps Lock shift by mistake, I think it'

  • Can it be written better

    IF(B2=1,+5) + IF(B3=1,+5) + IF(B4=1,+5) + IF(B5=1,+5) + IF(B6=1,+5) + IF(B7=1,+5) + IF(B8=1, +5) + IF(B9=1,+5) I need that formula from cell 3 to 38.  Any suggestions or do I just need to keep it as it is.

  • How can I change/color/font size of tab independently controls?

    How can I change/color/font size of tab independently controls? When I change one of these attributes, it applies to all the controls on the tab... Thanks for the help!

  • Taskbar autohide function disabled

    I can't hide taskbar. In the taskbar properties, I can't get this to work. I tried to uncheck auto hide and then check again but no use.