Spreadsheet Numbers - automatic reformatting

Similar Questions

• Is it possible to create a spreadsheet Numbers alternating line colors I choose (rather than just a line alternating color)?

  Is it possible to create a spreadsheet Numbers alternating line colors I choose (rather than just a line alternating color)?

  Hi tochan,.

  No, but it is possible to create this look.

  

  Procedure:

  Open a table.

  Format > table

  Check the alternative line color. The yellow value.

  Click the form button, select the rectangle.

  Click the shape to select it.

  Format > Style

  Set the fill color to green.

  The border value without border.

  Move the shape to align with the upper left corner of the table.

  Drag the handle at the bottom right of the form to the lower right of the table.

  Go to organize > Send to back (or backward and repeat until the form is behind the table, and the Green shape is visible through the non colored lines).

  Note that the form is independent of the table. If the lines are added to the table, alternating lines will continue to have the yellow filling, as it has been applied to the table itself, but the lines between indicate white background, until the shape is expanded to match the size of the table.

  

  Select the Table (by clicking on the 'target' at the top left.

  Go arrange > Send backward. (Repeat if necessary until the form is in the front of the table)

  Select the shape.

  Resized according to the table.

  Go arrange > Send backward.

  Kind regards

  Barry

• I want to is a column of numbers in my spreadsheet Numbers.

  I want to is a column of numbers in my spreadsheet Numbers. I know that the method formula easier, but some of my cells contain 2 numbers (13 + 5 or 8-3). I could use some help in the setting up of a formula. Would appreciate any help or suggestions.
  

  Feeling a little stupid!

  
  

  < re-titled by host >

  You will have to manually clean the cells that contain expressions. Number reads these text and SUM() ignore them all simply.

  You can clean them in doing the calculations yourself and by replacing the phrase with the result of the calculation, or you can add an = sign before the first number in each of those cells, conversion of the expression of the text in a formula and let the numbers to do the calculations.

  Once you have all the cells showing numbers, you can use SUM() to determine the amount.

  After you spent all this trouble, it will be time to think about what you could change on your data entry to avoid having to do it all again in the future.

  Kind regards

  Barry

• Numbers automatically linking data sets

  Hello

  I have problems with parts of the data sets are grouped automatically by numbers (3.5) when I don't want that to happen.

  I found that number is automatically grouping different sets of data in groups of six. For example, condition 7 is grouped with condition 1, condition 8 with condition 2 and so on. I initially found it frustrating, because when trying to make a data chart, terms of 7 and 1 colors are the same, like 8 and 2, 9 and 3 conditions and so on. But when you try to change the color of groups to distinguish them individually (really annoying for large sets of data), numbers automatically change the color of the corresponding group as well (i.e. groups 1 and 7 are both blue color, and to differentiate them, I change group 1 to black.) Group 7 then also instantly changes to black). It's extremely frustrating.

  Is there a default setting that I can change so that never conditions are combined unless I have specifically to group them? It seems really odd that this defect exists in the first place.

  Thanks in advance.

  It is difficult to view the problem from your description (a screenshot would help), but it seems you have trouble getting a graph to look right. You can try clicking on it, then the rectangle to change data references, then experiment with this change in the lower left corner of the window of numbers:

  

  SG

• Numbers automatically selects the "date format" for cells.

  Numbers automatically format selects 'date' of certain cells.

  I need "numbers."

  I want to calculate simple interest due on the amount, the interest rate and number of days.

  When I input "number" format of the result cell and calculate the amount * rate * number of days divided by 365 always automatically shows something unwanted and the format "date." Furthermore, I'm not able to change the AutoFormat ("date") in "number".  How to bypass this automatic selection?

  Thanks in advance

  UbiUbu

  Maybe you can share what, exactly, you enter in a cell.  A screenshot is also useful.

  

  Here's a way to do what I think you want:

  Enter amounts in cells B1, B2 and B3

  Select cell B6, and type (or copy and paste it here) the formula:

  =B2*B3*B1/365.25/100

  shortcut for this is:

  B6=B2*B3*B1/365.25/100

• How to stop automatic reformatting processes ViewRowImpl.java file?

  Hi all

  I use JDeveloper 11.1.1.4.

  I am facing a strange problem,

  I have a view with 'ViewRowImpl.java' for something internal logical object.

  Now I will create a "Transitional" attribute in the object View. After creating the "Transitional" attribute all ViewRowImpl java codes are changed and reformatted automatically.

  My question how to stop automatic reformatting processes ViewRowImpl? Is this possible in Jdeveloper 11.1.1.4.

  Thank you

  David.

  One more piece of information to add to Joel Ramamoorthy-Oracle:

  to avoid this problem, you must:

  (a) define a style (Tools-> preferences-> Code-> CodeStyle editor) that force you everyone to use

  (b) add a backup action reformat (Tools-> preferences-> Code-> SaveActions editor)

  (c) enable reformat code"block"when pasting (Tools-> preferences-> Code Editor).

  After that, the code that gets checked is always in the format and regenerate the code of a file impl is not a problem.

  Timo

• Pages automatically reformats to the correct size when you use Folio Builder or what I have to do format pages iPad, for example, in the placed InDesign document in place from the beginning?

  Pages automatically reformats to the correct size when you use Folio Builder or what I have to do format pages iPad, for example, in the placed InDesign document in place from the beginning?

  Transferred to DPS forum.

  You must configure the pages of appropriately for the target device. For iPad, it is 1024 x 768.

• Numbers: Automatically generate data in one worksheet to another worksheet.

  By the numbers, how can you (or is it possible to) automatically generate data in a spreadsheet that is manually entered in another sheet?  For example, I want to track customer information in sheets 2-10 and I want specific data of these sheets to automatically fill the sheet 1 box so I can create an overview of the specific data in any of my clients.  As a dashboard of sorts.

  The devil is in the details here. Can you give more details?

  In general, I would say it will be much easier to enter your data at a specific location and then consolidate that extracts the "views" or "reports" it for each customer, to enter data for each client separately.

  But both ways are possible.

  SG

• How to make a spreadsheet Numbers of my iMac for my iPad?

  I have reproduced a spreadsheet on iMac and moved to iCloud.com but it does not appear on my iPad.  Why?

  Where on iCloud did you move there too?

  Where you expect to find it on your iPad?

  In General, if you place it in the folder of numbers in iCloud it should appear in the application of the numbers on the iPad.

  If you place this product out this folder, then it will not be displayed in figures, but you can move it there using iCloud Drive App.

• Export spreadsheet Numbers to Excel removes the functions

  I opened an Excel file with numbers 3.6.1.  It works fine; all my data and my imported correctly formulas and

  the spreadsheet works fine.  However, when I then export the document in Excel, the data appear in the result

  Excellent document, but the cells where the results of the calculations on these data are all empty.  It's as if the functions are lost in the

  export.

  When you open an Excel worksheet in Numbers v3.6.1, so is no longer an Excel worksheet. It is translated in the format of the internal document numbers and is subject to the behavior and functions programmed in numbers. When you export to Excel, another translation occurs, and if you have applied the features unique to a number, it will be deleted, or mutilated in the process of exporting to Excel.

  If you share Excel spreadsheets with Windows users, then there will be less of a problem in using Office 2016 for Mac, when you open, edit and save in the native architecture of Microsoft Excel document. No translation. No surprises.

• open copy vs ios spreadsheet numbers App

  I have set up several excellent spreadsheet to transfer in the iOS app via iTunes numbers.  Numbers gives no option to "open" the files, if their file type is of numbers or Excel.  But... I can "copy".

  Is 'copy' the newly darkened Word for 'open' in the application?  for example, to 'copy' a spreadsheet to open it?

  Hi Donot,

  'copy' is what you will do. When you keep the files in icloud you would open the file and it would keep synchronized on your devices. I like to keep my local worksheets so I'm back copy with iTunes. When I want to send a file back to my Mac, I have replace the file in iTunes and then save it from there on my Mac, by overwriting the file there. Changes on the Mac loaded into iTunes, overwrite the file and before that I have copied to iOS I delete the original or I'll have numbers and Document numbers Document 2 on the iPod. A little complicated but the price you pay to waive the 'transparent' iCloud experience.

  Quinn

• Chapter numbers automatic for chapters within a single document

  I just got a question from a reader of my VQS. He wants to know how to "capture" the chapter number and chapter title to my chapters for footers in the document.

  I know how to make a model that is used for every single document that each chapter. These documents are collected in a book. Chapter numbers are set to "Automatic chapter numbering."

  But chapter numbers can only increase if documents are separate files assembled in a book. (At least, I think it's true.)

  But what happens if circulate you a paper with all the chapters within this single file? How to set chapter numbers to change automatically for footers? I suspect that you would need a variable text style paragraph or character as a footer. But how you get chapter numbers advance automatically?

  Would you use the bullets and numbering in the paragraph style?

  I know how to do these. I wonder what people would do for their workflow.

  You're right about the automatic chapter numbers - it's just one per doc.

  I think that I use a separate running header (character style) variable and try to pick up the number in the title of the chapter, if it is there or add a number of non-printing 'tag' on the first page of each chapter, if it is not.

• I need my iPhone 5 to numbers automatically several times a month to keep my number as I am out of the country

  IPhone 5

  I want the phone to make a call by month automatically while I'm out of the country to keep my phone number.

  This seems unusual to me. Why and who do you call to keep your phone number? Do you take your phone with you when you travel? Just set up a reminder that you make the call. I'm not aware of any way to have the phone to make the call. Should what type of response you do when you get that call? I don't see how having the phone automatically call a number no response after that the call would end would solve anything.

• Is there a reason why certain numbers automatically generated do not align with the text?

  I'm building a small book in InDesign and generated chapter numbers only display correctly aligned with the text of the chapter into two chapters. In others, they are slightly lower than the base line and print that way. They all use the same format title and list paragraph. (I even checked the Master Pages for objects that drag may interfere and see nothing.) Someone has seen this and can point me to a solution?  The original document was from the Pages converted to MS Word, so I tried to see if there are some strange characters which came with the conversion, but as you can see on the screenshot below, nothing shows up. Any help to identify the problem or a cure would be greatly appreciated.

  Here is a chapter that is displayed not correctly, and it is the base character Format options.

  

  This is the same information and display of one of only two chapters that are aligned properly.

  

  This is the same information for the works do not and the chapter number of work outlining the options for bullets and numbers.

  

  

  artomis-

  Eugene said that options 'last '. He meant the four options at the bottom of the list, but especially 'by default Figure Style'. Try "tabular covering" as Peter suggested.

  Tom

• page numbers automatically in Roman numerals

  Can I use a space reserved number auto-page on a master page and fill the pages with Roman numerals? It would be for a part of a book before. I need to create an InDesign book, and not a regular document to do this? Layout > numbering Options and the menu item is grayed out, outside, in the document. (InDesign CS3, Mac).

  A document may have several styles of numbering: I II III IV A B C D 9 10 11 12

  For this example, you need to request a new section on the first page of the RFSO and apply the Style: Roman and start a pagination to 1

  Then, you need to request a new section to the fifth page of the RFSO and apply the Style: Alpha and start a pagination to 1

  Then you must apply a new section to the ninth page of the doc and apply the Style: Arabic and start a pagination to 9

  You can use the page layout > Options section of numbering to set styles for the entire document

  You can access the Sections of the Panel flyout page numbering Options, have the page highlighted in the side of the page, then make your choice.