DV6 6030el: truesuite combined announcement on hp simplepass 2012

Similar Questions

• HP Pavilion dv6 Notebook PC: hp simplepass 2012, do not configure Windows 10

  I recently installed the Windows 10 operating system, as many have, and I'm having a problem with SimplePass 2012.

  The reader will not be 'new' prints to access my account.  (I made a new admin ACCT, after having the issue "Critical Error" with the W10 start menu.)

  I tried reinstalling the SP 2012 program to fix any problem of corruption, and the stalls of the reinstall at the stage of "Please wait while Windows configures HP SP 2012."

  Any thoughts?

  @Ronaldgg

  The oldest program of series 6 HP SimplePass not was not written to run on Windows 10 although I heard that it will offer service on the new operating system Windows 10 indeed.

  I hope you have at some point in the past remembered to export your Webcards. If it is necessary to remove and then install the SimplePass program, you will need this backup on importation of your Web sites / passwords again in the SimplePass database.

  I can offer the following:

  ===============================================

  HP SimplePass upgrade instructions

  Read the first page: Dragon Document guidelines

  Topic title:

  Procedure - updated / (install HP SimplePass Re)

  ===============================================

  General considerations:

  • Windows updates must be installed and up-to-date before installing HP SimplePass and / or repair operations
  • You can create a Restore Point in order to protect your 'place in the sand '.
  • If you have not previously exported your Webcards: you may lose your Webcards (Web site passwords). Assuming you get the program to work, but still manage to lose the existing database, this means that you will have to perhaps start and reset (back) all of your websites and passwords. Proceed at your own risk.
  • There are two sets of HP SimplePass:
  • AuthenTec series 6 HP SimplePass and Softex series 8 HP SimplePass
  • The two series are not compatible with each other
  • You cannot migrate from series to series (or back)
  • You can "pass" series

  ======================================================

  Driver is first!

  The pilot of validity must be (re) installed first, i.e. before the SimplePass program is installed, repaired or otherwise manipulated. It's hardware - fingerprint reader and his driver - be ready when other programs 'come on board'.

  Looking for a Driver for sensor of validity at least for Windows 8.1 - better Windows 10.  If site supports your computer Web page of the driver does not provide a driver, there may be in the document, you can use a compatible driver.

  See the titled subject: Bits and drivers

  ------------------------------------------------------------------------------------

  HP SimplePass is planned

  Next: once you have installed / reinstalled your valid driver and restarted the computer, decide what methods will offer the best chance to get the HP SimplePass working on your computer program.

  NOTE: success may require more of an essay or a combination of methods. the program is old and different environments.

  • Repair your program's existing HP SimplePass (database) in programs and features
  • Download the latest version of the 6 series HP SimplePass and overload manually (installation) program on top of your database (program)
  • Remove the program HP SimplePass existing in the system > Reboot > download and install the last programme of the series 6 HP SimplePass > if available, import your file, .tsd (Webcard backup)

  Finally:

  • Switch to series 8 HP SimplePass for Windows 10. Note that you must reset it, i.e. to create all your passwords site Web from scratch. You cannot 'import' your 6 HP SimplePass in series 8 HP SimplePass series password database. Don't forget: the two series are different programs.

  ======================================================

  General note to my readers:

  A reminder that my comments, documents and advice are mine and not a product of HP.

  Your comments are welcome - please remember to remain civil and in favor of our team of volunteers and members of the HP forum.  Thank you!

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP SimplePass 2012 and Firefox 8

  After finally getting a very good version of Firefox SimplePass 2012 (v5.3.1.7) upgrade to version 8 and disabled the extension "TrueSuite logon Web site" so now I'm stuck without SimplePass again. Are there updates available in the near future?

  Dragon fur,

  You are quite welcome and thank you for your understanding in the world of the HP support. I agree with your comments on this forum, it has been my 'Saving Grace' for my HP support issues, there is a lot of information in this forum and I will definitely use it for a long time to come.   I exclusively used HP for my laptop and printers and I feel they are the best available regardless of the media scufful.  I always use SimplePass v5.4.0.620 without any problem. IE9, Firefox 13 and even Chrome 20 work well with it, so I think I'll send you Kudo and close this post. Although I wish no problems... I will look forward to see again you in another post in the future.

  Thanks a bunch

• Looking for software SimplePass 2012 to upgrade my computer. Link please!

  Have DV6 - computer 6140us - can someone please provide the link to download the software SimplePass 2012. I looked at and it looks like a bunch of different links for different computers. I want to make sure that I get the right pair. THANKS FOR ANY HELP!

  Hello sc_sweeper,

  You want to update your single pass software.

  The last update that I found your product has been in 2011

  Here is the link for downloading software for your system if you want to take a look.

  Let me know if it helps.

• How to download hp simplepass 2012

  How to download hp simplepass 2012

  Try to remove the program from the control panel. Then stable this new http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103162-1&cc=us&dlc=en&lc=en&os=4063&product=5271365&sw_lang=

  THX

• Can I add an another logon user, for the finger swipe SimplePass 2012?

  Can I add an another logon user, for the finger swipe SimplePass 2012? I have an account, connect you with SimplePass 2012, but my wife does not work! I want so she is able to use my computer, but, to do so, she had have it me slide all the time! But, if it had its own log-in, it could slip into her own! If possible, very well! If not, then not much!

  SimplePass is a HP product, not a Windows utility. I recommend that you check the faq from HP.

• Want to dv6 Notebook PC 7226nr: scan fingerprint hp simplepass does not work after the upgrade to windows 10

  My HP SimplePass fingerprint reader does not work after the upgrade to Windows 10.  Is there a fix for this yet?

  I thought about it.  The upgrade to Windows apparently damaged 10 HP SimplePass software.  Once I uninstalled and reloaded the program, everything started working.

• HP SIMPLEPASS 2012

  Hello

  I had my Hp Pavilion dv6-6c35dx since all may 2012. Everything works generally fine... until now... for the last two months my simplepass has stopped working. As in, so that I am still able to log on Windows using my finger swipe, it is not pop up on Web sites that he should have passwords remembered for. I don't remember if I never clicked the "don't show me this again once" but have checked that all the sites used are capable and it seems that they are. I just tried an update and it said she didn't, this might be the reason? SimplePass was the only thing that made me buy this laptop

  Please uninstall the software Simplepass of the Panel, programs and features.

  Download the latest version of the SimplePass software from the following link:

  http://ftp.HP.com/pub/SoftPaq/sp61001-61500/sp61399.exe

  Simplepass software using links:

  HP Notebook PC - using SimplePass HP (Windows 7, Vista) fingerprint reader

  HP laptops - install and use SimplePass fingerprint reader 2011

• SimplePass 2012 stuck during installation after the upgrade to windows 8 pro

  Hello!

  I just upgraded my Pavilion dv6-6145dx to windows 8 pro and new installation preforming. I downloaded all the drivers and software from the hp support center, but when I tried to install SimplePass

  2012 stuck it in the middle of the progress of the installation for about 4 hours as shown below:

  

  Will I keep waiting? Or there is a solution knowing that I found its icon in the start menu?

  Thank you!

  Samuel Farid

  I installed the windows 7 one instead of. In any case, I fixed that by closing the Task Manager installation program, that the I started the software in the start menu, and believe it or not, it worked great. There is another way to solve this problem of Morphix, site Web AuthenTec software, it is much more updated and working great.

• HP Simplepass 2012 has stopped working...

  I have a HP Pavilion dv6, I use Internet Explorer and usually when I open a Web site that requires login information, an icon appears, letting me know that I can add login information on this particular website to online HP SimplePass accounts and save it, so that the next time I'm on this site, I can scan just my fingerprints and it automatically opens a session myself. Today I upgraded to IE 10 and after that I restarted my computer, Simplepass not working...

  Here's a link for instructions to run a system restore. It has a video included. Click on restore Windows to an earlier point and that's where the video and instructions.

• SimplePass does not work for Web sites after the receovery system

  I recently did a recovery plant system overall condition,

  SimplePass works for the windows logon, but not for Web sites more... no invites her to save new sites when passwords are entered finger print OR interrogate the user on sites that are entered manually.

  I also tried importing my saved identity still no website

  SimplePass 2012 version: 5.3.1.7

  Laptop model: DV6 - A6Y01UA

  CW,

  You did not include the version of your operating system: Windows 7 I guess because you have been deported back to a very early version of the HP SimplePass.

  You must consider that you may have a version of your fingerprint driver that is appropriate (fairly recent) to run a newer version of HP SimplePass.  The fact that the old version SimplePass does not at all suggests that you run the version of the driver 4.3.118.0 - this version of the driver is not compatible with subsequent revisions of the SimplePass software.

  Reference

  HP Pavilion dv6-6c15nr Entertainment Notebook

  • Fingerprint drivers

  If your version of the driver (for your OS) is equal to or newer than those listed here, chances are that you can keep your current licence.

  If your current driver is older than the driver for your operating system,

  then: download and install yet the driver of fingerprints for your operating system.

  sp58834 validity sensor V 4.4.232.0 Win8

  validity sensor V 4.3.205.0 Win7 sp55109

  [Devices]

  USB\VID_138A & PID_0018 = "validity sensors (WBF) (PID = 0018)" "

  ------------------------------------------------------------------------------------------------------------

  • Find, open, and follow the procedure described in the file named:

    Simple Instructions for upgrade HP SimplePass

  • Think about it: If you try to update to the recently released Omni SimplePass program, you will NOT be able to use your webcard .tsd file to import your webcards (websites and passwords) in the new version of SimplePass.  The Omni of SimplePass version is NOT compatible with previous versions of the HP SimplePass program.

  ==========================================================================================

  Finally, you might take a look at the Web page of your computer (under the reference above)-check to other drivers or software that you can update.

• HP Simplepass 2011

  I would use Simplepass lauch programs like Outlook, etc., on my laptop DV7. I see only one way to launch web pages. Of course, Miss something. How can you simplepass "program" for launching programs? Thank you very much.

  IAmHereAtHome,

  I think at least part of your answer.

  See:

  C:\Program Files (x 86) \HP SimplePass 2012\Shortcuts\Shortcuts.xml

  • The .xml file directs the application control.
  • .Png (in this same folder) files are the standard icons.

  You need Admin control to change the SimplePass 2012\Shortcuts folder and the file (Shortcuts.xml).  You must create a backup, and a place course fall back plan in case where the program don't like dirty you in the file structure.  However, the .xml files are just text, and it comes to the door.

  • .xml edition: Left to itself, when you open the Shortcuts.xml file, the file opens in Internet Explorer.  If you have a good HTML editor, use it.
    
  • .xml edition:  There is the question of the "UniqueID".  If this is a problem (and blows on the overall program), depends on the structure of the ID, how the original ID were built (maybe), and now they are used in the code.  You could just get away with creating an alphanumeric combination of your choice, as long as you use the correct classification and the number of characters or numbers.
  • .xml edition: Pay attention to the spacing, as well between the lines and between the characters.  Even the simple code may fail when these rules are violated.  A loser 'dot' can destroy all of that.
  • editing .xml:
    Change the line:

  file:///$ (SYSDRIVE): / ProgramData/Microsoft/Windows/Start Menu/Programs/Accessories/WordPad.lnk

  to match the location (path) of your program "Outlook."

  • editing .xml:

  You don't have to change the first part: file:///$(SYSDRIVE):

  This means the C"" drive.  Unless you did something strange in the installation, OutLook live on your main drive, 'C '.  I do not use Outlook - it might be in / Program Files (x 86)

  • NOTE the "oblique".  Do not miss this...
  • Make sure you have an export (backup) of your Webcards!  You may end up reinstalling SimplePass 2012.
  • You don't need to move your custom icon if you use in the folder shortcuts.  Leave everything else you did as before.

  =====================================================================================

  SimplePass assignment!

  
  

  Once you have added 'Outlook' to SimplePass,

  • Open SimplePass
  • go to "Applications".
  • assign the new application Outlook by drag - move the Application on the selected finger.
  • Export your Webcards!

  Good luck!  Please post back how you fare.

  I hope this helps!

  Say 'Thank you' for the help by clicking on the star of congratulations on the left

  This solution solve your problem?  Mark this message "accept as Solution!

  Note: You can find "Accept as Solution" only on the threads started by you.

  2012 the year of the Dragon!

• HELP - SimplePass deleted

  Hey, I deleted my SimplePass software following an accident, and now I don't know where to download it.

  Can someone give me a download link?

  HP m6-1000so

  Windows 7 64 bit

  A6 AMD Dual Core 2, 7GHz

  4 GB OF RAM

  If you're lucky, the software will be in your Recovery Manager.

  Start > type / search "recover" > click on Recovery Manager > reinstall Applications / drivers

  Find and install the software SimplePass...

  If the software is not there, THEN it gets complicated.

  The software is not found in the Web site of your computer.

  Two possible solutions:

   

  It is the version which is probably the provided HP software that may have come with your computer:

  SimplePass 2012 sp56487 V5.4.0.402

  If that fails, then delete it (from programs and features).

   

  and install this latest version of AuthenTec:

  SimplePass HPLite32_build_5.4.0.620

  The latest version of AuthenTec has all the features and functionality of the provided software HP device.  It also works with your backup file (export .tsd file), if you have one to import.

  Rules - order of events:

  • Install (restore) validity FIRST pilot - REBOOT
  • Install software SimplePass then - as he clean and happy?  Reboot again.

  For later...

  Whenever you make a change to the software, not expect to complain.  You can fix sometimes - do not uninstall, but entering programs and features, right click on the software package by clicking 'fix '.  This resinstalls the software without destroying your password database.  Then, it's Windows - Reboot.  This release fixes a bunch of "weird" stuff that happens.

  Driver do?  Go to Device Manager > biometric devices > right click and uninstall the driver.

  Restart and let the pilot resinstall itself when you open a session.

  Good luck!

• Pavilion DV6-6B26US completely crashed the month after warranty

  The month after my warranty was up (January 2013) my laptop started getting blue screens that would freeze the laptop.  He has never published a journal of the accident.  I ran the recovery disk and restored to factory condition.  He worked for a few weeks then happens again.  I've tried everything.  Test drive are good after restoring to factory State, but after a blue screen, I can no longer run test.  I have restored at least 4 times.  Now my laptop is not working even in safe mode, and it will not work the recovery.  I read to try to install windows 7 from a windows disk, but that will not work without the driver for the hard disk, that I can't go anywhere.  With all the problems that I have just read on this laptop, why HP does not solve this or making it right?  I have a Toshiba laptop which has worked for 7 years. (touch wood)

  Anyway, if someone has a miracle in difficulty who does not buy a new one or pay for technical repairs, please let me know.

  Here's my info:

  HP Pavilion dv6-6b26us

  Windows 7

  Buy Jan 2012

  Seagate hard drive / model ST9750420AS / pilot was 6.1.7600.16385 / firmware 0003HPMi / series[personal information deleted]

  Thank you

  I had to replace the hard drive for this problem.

  Thanks for trying to help.

• Problem HP Simple pass 2011

  I have a laptop HP DV6-6120us, bought less than 3 months ago. My validity sensor HP Simple pass suddenly stopped working. I looked in my device manager in the control panel and located the biometric device such as validity sensors (WBF) (PID = 0018). I checked the status of the device and received this message: "Windows has stopped this device because it has reported problems. (Code 43). "I checked to see if the necessary driver update, but it seems that I have the latest version. What should I do now to restore my HP Simple pass to the State? The version I use is 4.3.118.0. Thank you.

  Welcome to the world of HP SimplePass 2011 / 2012.

  OK, take a look through the forum and you will find a large number of (MANY) entries on HP SimplePass 2011 / 2012. There is also a replacement for the HP version called EgisTec SimplePass that some people have used successfully.

  The system on which SimplePass 2012 is / was responsible is in the shop for repair of webcam, so I can't comment or experiment on it for you on the error code 43.  I found that after some looking around...

  Error code 43 may have a USB taste - you may be suffering from problems Validity Sensor (driver).  The mechanism of material of fingerprints may have failed - unlikely in a new system.

  The software is probably trashed for a similar reason that HP SimplePass does not for everyone - it is fussy software and is subject to driver problems.

  It is not a lot of fun at the moment - all Rate Digital Persona.  The smile.

  You're updated to HP SimplePass 2011 as much as you can.

  So, what to try.

  An idea:

  • If you can get in SimplePass, do it and get it saved - you must ensure that you have your saved web cards.  (I can help if you are unsure how to do this.)
  • After graduating SimplePass saved, delete it.
  • Next, clean your registry database.  If you do not have a registry cleaner, CCleaner is a good, find another, and use one of your choice.
  • Restart, even if you are not told to do.  Windows like it when you reboot.

  Next:

  You might go to HP SimplePass 2012.

  So, uninstall and reinstall your driver to the latest validity.

  SimplePass V5.3.1.7 sp54680

  Validity Sensor 4.3.205.0

  FTP://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53369.exe

  Once again:

  Read, read, read - if does not help that I have indicated above, your answer is probably in the forum.  A lot of people have had success, and there are a lot of smart people here.

  I hope this helps!