DV6-6c40ca: more than 100 seconds to boot Windows 7 on dv6-6c40ca

Similar Questions

• Acer Aspire 5349 began to stop randomly, now can not stay on more than 2 seconds

  Hello world!

  I use my 5349 aspires for more than 4 years now running Windows 7. A few months ago, he began stopping at random - sometimes after an hour of work, other times - after 10-15 minutes.

  It is used mainly for light office work, but given his age, I decided it was due to the accumulation of dust or otherwise overheating due to thermal decomposition paste to the processor and the thermal pads - for the video chip. It is out of warranty, so I disasembled he replaced even if the thermal paste compound and the thermal pad seemed OK. There was no dust important problem as well, in any case seized the opportunity to thoroughly clean.

  After assembling and switching on, it ran stable for 3-4 hours which even helped me put upgraded to Windows 10 (32 bit). He rested for a few days due to the holidays here and then when turned on - again closed in about 10 minutes. After that no matter what I do - perform disassembly, check for loose contacts, CMOS battery, laptop battery, etc.-, he could not run for more than a few minutes from the Windows recovery and then stops again. In the last days it even can't stay for more than a few seconds before stopping again, so I can not even get into the BIOS.

  Laptop battery is good, because it has always been used as a desktop replacement, in all cases tried with battery and battery off nothing works. The power brick is one that came with it originally, even though it says LITEON instead of ACER. Tried another one with the same voltages and amps for an another ACER laptop - the situation didn't improve or change at all.

  Logically, I started reading here and discovered on exactly the same problems with other similar models, so I tried all the suggestions - replaced RAM, HDD, DVD, tried to boot from USB or DVD, tried to remove the build-up of electrostatic charges. I'm very suspicious of the latter, or any electrical problem / might like, because when I completelly demolish the mobile nut, i.e. by removing everything that can be removed and then back - it works for 10-15 minutes before closing.

  So, finally, the question is - is there suggestions that I could follow?

  The easy solution is to replace the MB in case it would help, or the completely portable, but I hate when I don't understand or diagnose a hardware problem and will make every effort to identify and resolve.

  See you soon!

  Google the keywords "5349" "mainboard" or "motherboard". Replacements to run $100 inc shipping, some on ebay U.S. and other China.

  Jack E/NJ

• Whenever I try to open the App Store it will remain open for more than 30 seconds before the close. Or it just restarts as soon as a home screen scroll above him. I can't keep it open long enough to even download an application.

  Whenever I try to open the App Store it will remain open for more than 30 seconds before the close. Or it just restarts as soon as a home screen scroll above him. I can't keep it open long enough to even download an application.

  Hello monorayfromportland,

  If you are unable to connect to the iTunes Store on your Apple TV, take a look at the troubleshooting steps below:

  If you cannot connect to the iTunes Store
  
  

  If you cannot connect to the iTunes Store on your Apple TV (4th generation):

  1. Make sure that your date and time are correct. Go to settings > general > Date and time.
  2. Check if your Apple TV software is up-to-date. To check the updates, select settings > system > software updates > software update.
  3. Make sure you have an active network connection. Go to settings > network.
  4. Check to see if other devices, such as computers or tablets, can connect to Wi - Fi and access to the Internet.
  5. Reset the wireless router by turning and then again.

  Take care.

• After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.

  After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.

  # Multimedia files are hardlinked.

  (141516)

• I had installed a new driver and then downloaded Firefox 7. It has more than 100 witnesses in the download. Delete cookies in the browser do not help since then is in the download. How can I permanently deletes these cookies? Thank you.

  Since it's in the download, I'm unable to permanently delete these (more than 100) cookies and they continue to reproduce whenever I open the browser. Sometimes cookies will not delete when I try to delete the cookie "only" and I have to remove "all". I used Firefox as my browser for years, but this never happened.

  Create a new profile as a test to see if your profile is the source of the problems.

  -> Basic - a new profile troubleshooting

  IF this new profile works, then you can retrieve your bookmarks and passwords the old profile.

  -> Recovery of data from an old profile

  Check and tell if its working.

• Is it possible to adjust the sound volume of Windows to more than 100%?

  Hello

  I have a very simple question:

  Is it possible to adjust the sound volume of Windows to more than 100%?

  I explain why I need to do this:
  I can watch DVD files or .avi with my computer and VLC, that allows to adjust the volume to 100%. Some DVDs have a very low sound. So if I set VLC to 200% volume and the system volume to 100%, I can watch movies in good sound conditions. Then, my computer speakers are strong enough for me watching a movie.

  However, I have a problem with VSD: I use VOD with Windows media player and that player does not allow me to adjust the sound to more than 100%. So I put the sound of Windows media player at 100%, the sound of Windows to 100%, but the sound is very low.

  Please don't tell me to buy speakers, mine are pretty strong, and I find it uncomfortable to plug the speakers.

  Please don't tell me to use a software that increase the volume of the file I want to watch VOD.

  Is there a way to increase the sound volume of Windows to more than 100%?

  Please don t tell me this, please don t tell me that. You want to hear other people's opinions or what?

  AFAIK all sound level settings in Windows are synchronized and if you change the sound level in the properties of the speaker at the same level will appear in the Windows for the Volume Mobility Center and the maximum level is 100%. No more than that.

  As you already wrote the sound level can be increased in combination with Windows and some players.

  Is there any other way to watch these videos, but using WMP?

• call lasts not more than 55 seconds

  Hello

  This is my first time using Skype for calls. For some reason any calls lasts not more than 55 seconds. I tried to sign Skype App and restart again but it still the same.

  My mobile is Nexus 6.

  I use Skype to call the mobile line Turkey.

  After searching the Web, I discovered that I have to use a vpn connectivity and it worked.

• How to scan more than 100 items of csv file in labwindows/CVI

  Hello

  I need little help related to playback of content from. CSV file.

  My code is as follows:

  FP = OpenFile ("FileName.csv", VAL_READ_ONLY, VAL_OPEN_AS_IS, VAL_ASCII);

  ReadLine (FP, Line,-1);

  I use the Scan() function to store all these values in the separate variable.

  But I am getting error near following Scan() format string.

  Please help me in this regard.

  Thank you

  Herald

  Hi Ruben,.

  the method simpler and faster to scan more than 100 arguments from a line is probably to use the keyword "rep" in the format string, as you can see in the onluen documentation and in following example taken from the ICB help: "String with separated by commas of the ASCII values in real table" search in the linked page. After reading return values, you can decide how to divide your table of values in important variables in your.

  Another option would be to read online and then manually manage in a loop using strtok () function of line in single values.

• Alert on the desktop of an email to last for more than 30 seconds?

  Is there a way to get the desktop of an email alert to last for more than 30 seconds? This seems to be the longer choice.

  How to access your e-mail?  Using Outlook Express or something else?

  If you set the new mail sound under control panel notification | Sounds, then you must find a longer sound for 30 seconds.  You can use any wav file.

  Steve

• Any Powershot camera allow exposures more than 15 seconds?

  I want to be able to shoot shows at least one minute or more, mainly to photograph pictures of night of lightning, stars, meteors, etc.. I would also like to have the convenience and accessibility of a point and shoot camera. To present all the Canon point and shoot cameras I looked no more than 15 seconds only allowed exhibition. Are those that allow the exposure time?

  Hi raydunakin,

  The reason why you can't find many cameras PowerShot that take more than 15 seconds, it is the small sensors, heating becomes a problem. Too much heat can shorten the life of the sensor, or even damage the data on the chip. The Canon Hack Developers Kit (CHDK) is software that can be downloaded from a number of cameras PowerShot exceed this limitation. If you go this route, use it sparingly to avoid possible damage from the accumulation of heat on the sensor.

  If you increase the price range, the PowerShot G (G16, G7X, G1X) series cameras can exceed 15 seconds in Tv mode and manual. These cameras have bigger sensors more large boxes and are not as prone to failure of the heat of the exposure time. But be prepared to shell out some serious money. These are not cheap, starting at $500.00 and climb rapidly from there. If the exposure time are important to you, you can consider a DSLR or CDI entry level camera. They can be had for around the same amount of money and performance much better low light performance.

  Steve M.

• More than 100 microsoft security updates should I this

  Have more than 100 microsoft security updates do I need all these also have the service pack 2 & 3 also

  To add to what MakerDusk recommends, after applying all updates, you will need to run the updates again, as some are prerequisites to others. Keep running it until you don't have any more than you need to add.

  I hope this helps.

• Acer Iconia W700 - slight delay in contact after inactive for more than 5 seconds

  I upgraded the OS 8 Win provided with the tablet to Win 8 Pro and since then, I have a slight delay in recognition touch screen after the Tablet is idle for more than 5 or more seconds. As a result, I have to type something twice before it responds. Once I spent idle time, touch works exactly as expected. It is only when there is no tactile activity for more than 5 seconds. It becomes a bit annoying when you play a game or navigate the web where you sit idle for a second, click on a link or an action and I must so he struck again because the contact does not save. I played around a lot with the operating system provided with the Tablet, so I cannot confirm if this happened before I upgraded to pro.

  In addition, I have since 8 reloaded Win pro from scratch and there was no change. It seems almost that the tactile sensors screen go to sleep or something. Very strange.  Thoughts anyone?

  Go to Device Manager, look for human interfaces, then change the two input USB device and uncheck the first line in the current tab.

• Why should I return my password every time I have to leave my computer idle for more than 30 seconds?

  Why should I return my password every time I have to leave my computer idle for more than 30 seconds?

  Why should I return my password every time I have to leave my computer idle for more than 30 seconds?

  You set your options of power that computer goes to screen saver if you left computer idle for 30 minutes?
  If so, and if you don't want to enter password once again, this...

  Start button > in the search box, type screensaver > press enter > in the settings window of the screensaver, uncheck "On summary, the logon screen" > click OK when finished.

• My headset doesn't work more than one second to another second

  Hello world

  My headset doesn't work more than one second to another second

  I was talking with my friend, everything was fine but I started eating and I turned off the microphone with the switch based cable.

  My friend asked him something, I wanted to answer then I switched back on it. We did this several times, but after 4-5. marketing, he was not able to hear me more. I tried with other micro there must be something with my pc (del or related more difficult)

  I tried everything already, even downloaded the MicrosoftFixitAudioRecording.RNP.Run.exe. I ran, but could not solve the problem.

  He said that "the Audio recording device is disconnected.

  However his trendy ofc, but anyway his doesn't...

  Can someone help me please?

  My partners can not hear me, so I just had the problem with the microphone part. The headphone speakers works well.

  All the drivers are up to date. The computer is new (~ 2.5 months)

  I run Windows 7 64 bit

  Hardver specifications I can add later if his need.

  Thanks for any help in advance. Best regards; Rizkay

  PS. : sry for my bad English

  Hi Rizkay,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that this headset stopped working.

  There may be a hardware conflict.

  I suggest to try the steps in the Microsoft Help Article below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=Windows-7

  You can view the help on the question below link
  Connect a microphone music player or other audio to your computer device -
  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• How can I make my program works with more than 100 class files?

  As soon as my program generates more than 100 class files I get the following error: cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified. Is there a way I can increase this limit? My program is small. There must be way to work and Add again all the features I need to add. Thank you

  I got it to work. I reinstalled the JDK, then set the path in the environment variable, restarted eclipse and it worked. It's still a mystery why it worked until I got 100 classes.