Dv6500 hard cto upgraded?
Thanksfor the entrance!
I recently bought a retina-iMac 21.5 "(fin 2015 obvs), without realizing it when I did so that it came with a slow hard disk 5400 RPM that will larn me - do your research the next time Cameron!" In any case, I'm trying to sell it, but my search for a buyer continues, I also try to establish - without much success until now - if a hard drive upgrade and/or installation of a fusion player any is possible. I am aware that the RAM in this model is not extensible.
Any entry received with gratitude
Although it is possible it is a company very difficult and will void any warranty future and Apple. Have you thought from the external drive Thunderbolt?
I need to upgrade hard drive of my laptop because it is very slow. However, I know it's a 60 GB to factory-installed 4200 RPM.
I'm ready to be upgraded to a fast 7200 RPM, if possible, with a decent capacity, but I'm not sure of the supported hard drive type (IDE?, 2.5?) is a model of 5 years. In my view, there are incompatibilities with the laptops today, hard drive formats, so I really need help.
Thank you very much for your help!
These are the specs on the site
http://EU.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 97598
In my opinion the HARD drive upgrade will not increase performance well then you should try the other options first as reinstalling Windows, or upgrade the RAM.
Anyway, Satellite A50 use IDE interface, so you can use hard disks of 120 GB of disk space.
Of course, you can take a model at 7200 RPM, but they need more energy and produce more noise.
I recommend a 120 GB 5400 RPM model. That s pretty fast!
are there restrictions on the type of hard drive that you can on this model?
Number of PINS
Type of the ATA
I was watching a Seagate Momentus 5400.3 ST980815A, if this helps answer the question.
I found the info your device comes with 40 GB IDE (ATA - 5) HARD drive. I think in your case, to capacity. High-capacity hard drives are not recognized properly, but I think that with 60 or 80 GB HDD should perhaps be recognized correctly.
If anyone on this forum can give you accurate information, I recommend you contact your local dealer or service in your country. They are experts upgrade material and they have accurate info on HARD drive upgrade.
HP 6470 b 2nd hard drive upgrade. How fast this port works on? SATA I, II or III
I want to put in a 60 GB SSD into the CD slot and want to see how fast it will support as this will be used for the Cache
The published information is not explicit; He says only: SATA for the expansion Bay while the main hard drive Bay expressly says SATA-III. However, given that this isn't just an optical drive Bay, but also a general 'Bay expansion', it is safe to assume it of on the same SATA bus as main drive and is a SATA III interface.
6470b is also supposed to have a slot for a WSSD mSATA, but he is not described in the Manual:
Obviously the WSSD would work better for cache but you can use a 60 gig SSD in an expansion bay for both cache adapter. Even if the connection is SATA-II, it will be much faster to work for a cache of acceleration.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
What is the maximum size of hard drive upgrade that works with the Vostro 420?
FYI: I am considering adding a Western Digital Caviar Black WD2002FAEX 2 to 7200 tr / MIN 64 MB Cache SATA 6.0 GB/s 3.5 "internal hard drive
(The 6.0 GB/s should adjust downwards to the Vostro 420 3.0 Gb/s, it's the limitations of maximum size, I need.)
2 TB SATA hard drive, works perfectly in a vostro 420.
Hi demand an upgrade memory or hard drive.
Pavilion 15 t-n200 CTO
Intel core i3-4005u 1.70 ghz
4 GB mem
Fact check on memory sytem and it says:
1600 mhz DDR3
Seen a refrence on another site that said for 4th gen proc to use DDR3L... so don't know which one to use.
I was wondering if this unit can use an SSD?
Thanks for your comments
The link below is the manual of your device
Supports up to 12 GB of memory system max (module DDR3L 1600 MHz), (Page 2)
For hard disks according to the manuals, I don't see that it supports standalone SSD.
I want to upgrade the hard drive on my Presario v6200 CTO. The current drive is: FUJITSU MHV2060BH PL ATA. If the upgrade is available, so how do you transfer the OS (provided with the computer).
Thank you so much - I used NEWEGG before without problem!
Planning to increase my current laptop HP Pavilion DV6500 CTO 2 GB (2 x 1 GB DIMM DDR - 2 667 MHz) RAM of 4 GB of RAM.
I can only increase to 3 GB because my Vista is 32 bit? Is this correct?
What is the way to run a 64-bit Vista?
Can I upgrade my RAM DDR2 667 MHz for a Kingston Hyper X 4 G 800 Mhz DDR2 NON ECC SODIMM Module or should I stick to 667 MHz itself?
Please let me know. Thank you.
There is no upgrade to 64-bit from 32-bit Windows, you must do a clean install. And Yes, 4 gigs only makes sense with 64-bit Windows. You can put the DDR2-800 in there, but it will operate at speed 667 mhz. Don't bother with 64 bit Vista GB Windows 7, is said by the way.
I was wondering if I could upgrade my hard drive to an SSD and leave the existing as a backup HARD disk drive? Is there in the machine? Thank you!
In a Slimline desktop space is quite limited, even if an SSD is format 2.5 ".
You can probably adapt Island SSD in the Bay which was taken over by the DVD player. Set up as startup disk so that you can enjoy the performance gain. Buy the largest capacity SSD that is in the budget to upgrade.
I have a HP Pavilion dv6500 entertainment computer laptop, processor Intel centrino duo and 2 GB Ram under Vista. The original 160 HD SATA Gbt completes and slow and I want to upgrade to a new HD. I think I have a Seagate 1 TB 2.5 inch notebook computer Solid State Hybrid Drive. Will be of this form and it works without any problem on this laptop? What is a recommended option?
Your advice would be appreciated.
Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6500 Entertainment of CTO Notebook and concerns with the installation of a hard drive again. If you keep the new larger than your original SSD and it supports Sata 5400 RPM 9.5 mm, 2.5-inch hard drives, you'll have no problems.
Here is a link to your manual page 23 for specifications.
Please let me know how it goes.
Right now I have a default installed HP Hitachi SATAII HDS721075KLA330 hard drive (750 GB). I would like to know if there are limits to what an hd upgrade might be? I am thinking for example a 64 MB/s 2 to disk 7200 RPM.
A 2 TB HARD drive replacement is compatible with your operating system.
However, pouvez have you a problem using the HP recovery discs to reinstall the original HP image, please see here.
A workaround is available.
You can download a Win Vista. ISO, burn it to disc and install on new HARD drive. You will then need to install the drivers from technical support of your site PC. You may also Activate Windows by using the product key on the COA sticker affixed to your PC.
If your current HARD drive is in use, you can also copy C:\SWSETUP content on an external drive. This folder contains the drivers and the software currently installed on your PC. This will avoid to download the drivers of your PC to the HP support site.
I'm not an employee of ch *.
"" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.
17 t - j000 Notebook
H8 1380t CTO Desktop
I have a T60p 8743 CTO with Vista Business. I upgraded from 2 GB to 4 GB and 100 GB to 500 GB HARD drive.
The process that I did was to replace the old HDD with a new one. Recovery discs to load the vista on the new HARD drive. Then loaded the last backup of the old HARD drive. I assumed that I had all the features of the tools think vantage on the new HARD drive too.
Now, I was intending to load the Linux operating system. Then when I tried to create a backup using rescue and recovery, I couldn't get fact.
Could you please suggest me if there is a mistake in the procedure above. How to solve the current problem?
Could I make a partition and load Linux with problem? I need Linux to my goal of research.
I appreciate your help.
Thanks in advance.
There is some info on this thread from a member of the staff of lenovo which may help to http://forums.lenovo.com/t5/ThinkVantage-Technologies/R-amp-R-error-The-backup-did-not-complete-succ...
I'll do an upgrade from Windows XP to Windows 7. I will be installing Windows 7 on a new empty hard drive. I want to keep my bookmarks Firefox and Ad Ons. What is the best way to do it. Thank you for your help.
The best thing for you to do is to make a backup of your Firefox profile. It is a folder that stores bookmarks and Add-ons that you can then add to the reinstalled Firefox on your new operating system.
Learn you more about the Firefox profile folder, how to backup and restore, here.
I hope this helps, but if not, please come back here and we can look at in another option for you.
I bought the Z40 with a 500 GB HARD drive. As a replacement, I bought the next SSD:
Crucial CT512MX100SSD1 - 500 GB
Unfortunately I don't have to work. On the BIOS, I see that the system recognizes the ssd. But the boots of system restore, or windows 8.1 detail installs. Are there any known compatibility issues?
Problems persist if the bios setting is UEFI oder CSM.
I have upgraded to the latest version of the bios to 3.7, but that did not change the result.
If the BIOS recognizes the new SSD drive, the drive must be visible to the system.
May I ask how did you try to install the OS Windows 8.1?
Have what media you used?
The Z40 Tecra can't internal ODD (optical disc). This is why I m wondering about the installation procedure
Maybe you are looking for
I know that you can add firewire, but what about USB drives? I have more USB ports.
so I have a peripheral nunknown in the Device Manager, the hardware iD is len0078 of some research, it comes to HID radio. I use windows 8. He is a driver for this on the beta page, but doesn't seem to install it. another user had the same, but made
Hello. I am having some problems with the print on my Windows XP Pro machine spooler. The print spooler service stops. I went into the service and restart the print spooler and a few seconds later it stopped again. I currently have a print job in
After owning my computer for 10 years, I had to reinstall Windows XP came with my computer. When I entered the product key for windows, it says that is not valid. I tried to enter a couple of times thinking that I received the wrong key, but said h
With queue problems when you try to print from accounting program (MYOB), will not print on a printer, pdf nothing. Other documents on the computer outside of the MYOB program print correctly. does not display an error it just wraps and there is not