GPIB-USB-HS is not correctly recognized NI Max and impossible to find NI VISA resources

Similar Questions

• Why my key USB 3 is not correctly recognized

  I have a Kingston USB 3 six-month-old stick memory (which works without weird messages on my PC). From time to time (not always) when I plug it into one of the four ports USB 3 on my seven-month-old Dell Inspiron 17R IS tells me that it would work faster in a 3 USB port! Once told me ready boost would not work if I did not USB 2 or better! These messages are trash.

  Dell, at HIS own expense, being a decent company, took the laptop, updated all the drivers and got rid of some echoes of startup. Next, the message appeared again. The next day, told me the ready thing kick boost (see above) and that the next day (yesterday) and today, insertion of the memory stick has produced no message.
  Kingston, another good company, proposed to replace the stick without fees.
  But EVERYONE seems convinced it's a Windows problem (and Microsoft does not correct problems JIB, it?)
  What is going on? And how to stop these absurd messages that appear again?
  Any suggestions? Please?

  Have you tried a different brand of USB 3.0 memory sticks?

  If they do not work correctly then I would offer of replacement of Kingston. If the other brand is not working properly I would make sure to run all windows updates. If it still fails, you will need to contact Dell and look into getting a replacement of the system board.

• How to fix my usb ports? Not correctly recognize the iPod and other devices of storage correctly.

  I had problems with getting my iPod classic 6th generation to be recognized by my computer windows 7.  It works very well but all of a sudden stopped working.  When I connect the iPod, it says on the product than its 'connected' and is in charge, but does not appear on "my computer" or on iTunes.  Now, I supposed that it was a problem with my apple product, but after putting in the store and plug both Mac and PCs, this worked fine, its clear that it is actually a problem with my specific PC.
  All software are up to date and I tried stop and start the unit. (Control Panel > administrative tools > services > device mobile apple).  The PC also recognizes the iPod randomly once in a while and I managed to restore the iPod to factory settings to ensure that there is no problem with the device itself.

  As stated earlier that the iPod is not visible in 'my computer', but when "devices and printers", there are two elements relating to the iPod, appearing almost as if it's two separate devices. the first is "apple ipod usb device" on the devices section and "Apple mobile device USB driver" in the section not specified.  When I click the first device it freezes the computer for awhile.
  I tried to move the ipod to different USB ports that make no difference.  However, when I put in a pen memory USB (TDK 4 GB), it initially also put it in unspecified, but with a yellow warning down logo on the left and when I moved my wireless usb key for my keyboard, it didn't work initially.  These two seem to have resolved themselves in Device Manager...

  In my view, there is a problem with my usb ports grateful drivers. Any idea what I need to do?

  Hello

  Thanks to community Microsoft can help you with your concern for Windows!

  You are facing problems with the USB ports on the computer.

  Method 1:

  Run the troubleshooter of material and check what is happening.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  1. click on start and then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  3. in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Method 3:

  You can update the driver from chipset from the web site of the manufacturer and then uninstall and reinstall the device driver updated from the web site of the manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem persists, or you need help on Windows please keep us informed.

  We will be happy to help you!

• Brother Hl-2270DW with Dell Inspiron Mini printer. It is not on the Mini CD and can only find HL-2170DW.

  Trying to activate my brother Printer HL-2270DW with Dell Inspiron Mini.  It is not on the Mini CD and can only find HL-2170DW.     How can I get this printer to connect without using the disc?

  Please do not let your Windows version a secret.

  Find the driver here: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=hl2270dw_all

  Install the driver and then connect the printer.

• Driver XP GPIB-USB-A has not installed with NI488 - 2.8.1

  I have the DVD driver for August 2011, and I installed NI488 - 2.8.1, which should have the GPIB-USB-A driver in it. I plug it in, and Windows cannot find the driver for it. Is there a specific folder, I do so he could find the driver?

  According to the readme, it is not supposed to be the - one support and has not been supported since version 2.2.

• I have two devices gpib-usb-hs; two of them work in MAX, but will only work in labview, help please?

  Hello

  For my application, I need to communicate with two instruments by using both devices gpib-usb-hs. I use Windows XP, Labview 6.1, MAX 5.1 version and NI488.2 version 2.42. I checked and this ni488.2 driver should be compatible with my devices gpib-usb-hs and my versions of windows and labview. I also tried versions older and more recent NI488.2 without success.

  I can communicate with my instruments properly in MAX, tell me that the devices themselves are functional. When I try to connect with my instruments using labview (using the example of gpib of labview), only devices gpib-usb-hs communicates with success. The other device returns the EDVR error: connection to the device or driver error.

  I don't really know where to go from here. The only thing I found strange was that the gpib-usb-hs work was has an alias name assigned visa while the unworking device does not. I tried to give him an alias name, but this did not help.

  Any suggestions would be greatly appreciated.

  There are many free tutorials on GPIB. It should explain how the various instruments can be connected to a single controller.

  That being said, even if it's unnecessary, you should have no problem with multiple controllers on the same pc. The two being connected, they pass all the tests in MAX? You are using an old driver and seem to have tried several different versions. I suspect a driver issue, and I advise you to uninstall all the drivers GPIB and VISA and then start again. But not all necessary can be done to satisfy your curiosity.

• Pages of Firefox won't load does not correctly. User name and other action buttons do not respond when clicked. I tried the Java toolkit release, but who doesn't.

  Some sites such as Netvibes and other sites containing columns all of a sudden not correctly displayed. Registration or login buttons do not respond.

  The plugins are up to date.

  You can try the following steps in case of problems with web pages:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I have an index page that does not correctly load the css and css works on all other pages of the site.

  http://www.boulderridgecondos.com/ does not correctly load the css, but all other pages of the site loading the css correctly. There is nothing (that I can identify) between pages.
  http://www.boulderridgecondos.com/news.htm

  I guess something is wrong in the css, I inherited this site and have exceeded the css but can't find a problem that would cause this to happen.

  Any help or suggestion looking for something would be appreciated.

  This page is saved in UTF-16 format (Content-Type: text/html (UTF-16 BOM, litte-endian)) in your text editor. The CSS file is sent as ISO-8859-1. Firefox fun to see all the files in the same encoding. The other pages are send as ISO-8859-1 and so use the CSS file. You will need to re - save this page as ISO-8859-1 and download the corrected version.

• After the installation of 6.0 KB948465 - X 64 .exe it does not correct the graphic titles and programs on the taskbar

  Downloaded this update KB (above) - not IS NOT CORRECT THE GRAPHICS AND BLURS PROGRAM TITLES ON TASK BAR... VIRUS? PLEASE HELP ME!

  You have another question in these Forums about this;

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/60-KB948465-x64exe-prefer-not-IE-9-force-fed/022efdba-4F65-4e7c-9fff-f4b19f91b85d

  The Service Pack is not designed to solve your graphics.

  Access the site on your computer or the manufacturer of the graphics card > drivers download Section > then key in your computer or a model number graphic card > find your operating system > find two graphics / video or the drivers of the Chipset and download and install.

  See you soon.

• Windows does not correctly - open cursor freezes and gets to abnormal termination

  Cursor freezes. Then I can just turn off the computer at the tower. Windows then reopen correctly. Sometimes I'm asked to select 'normally open', sometimes prompted to opt for the option "repair". Sometimes takes up to 15 attempts before getting the chance.  Then the process repeats itself afterwards. There is nothing wrong with the cursor. Help!

  The best way to combat the freeze is to be patient and select Ctrl + Shift + Esc to bring up the Task Manager. Click on the Applications tab, place the cursor on a running application, and then click end task. Be patient as the task manager should have priority over a problenmatic that runs application. It usually does, but he needs time. If you continue to use the Power On / Off button you will make things worse.

  Can you identify which application is causing the problem?

  What anti-virus program do you use?

  The amount of RAM is installed?

  You authorize chkdsk to run until the end, when the computer does not start normally? You must allow running chkdsk.

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• USB Flash will not be recognized in Windows 10

  I have 1 UltraFit 64 GB, bought last month. It's work very well and smoothly until a few days ago.

  Suddenly, the disc not recognized in my windows laptop 10. I see it in the Disk Manager, but I can't assign a letter, cannot format or do something else.

  I tried 3 other laptops with Windows 10. just noluck

  I tried 2 other laptops with windows7, it should work normally

  I tried on my NAS MyCloud, there work.

  I've created boot on my friend laptop (windows7) then try to start my computer laptop. it's working normally.

  So I think that my USB flash only have problems with Windows 10

  The Bank refused to help me, because they all use windows7 and have no problem with my usb drive.

  You guys can suggest me how to solve this problem?

  Thank you very much.

  You run the last update to win 10 AU? There are jobs everywhere in the Internet of devices USB not recognised in WIn 10 but from what I can find, it seems, the issue has been resolved in the latest version of win 10 to THE.

• Imaging Source DFG/SV1 acquisition card is not correctly recognized in LabVIEW 2009

  I have an Imaging Source DFG/SV1 frame grabber/capture card (I think that this example uses a Bt878 chip) that I am using with LabVIEW 2009 (Fall edition 2009 academic Site license), including elements of acquisition of vision (NEITHER Vision, NOR-IMAQ (4.3) OR-IMAQdx (3.4), etc.). I have all the latest sources of imagery support drivers and software for the Board of Directors (http://www.theimagingsource.com/en_US/products/grabbers/dfgsv1/ drivers: v6.0.3.0, IC Software v2.1 and IC Imaging Control v3.1) with drivers being compatible DirectShow. The DFG/SV1 is detected in MAX under devices NOR-MAQdx / DFG/SV1 / cam0 and I can grab and preview images, however to 320 x 240 resolution, I have a higher resolution camera and know that the jury is capable of greater resolution using IC software manufacturing and also via TWAIN with ImageJ software drivers. Interesteingly, if I try to acquire an image of the card purchase using the Vision Assistant, the DFG/SV1 card is not recognized as a card acquisition, but listed under IEEE 1394 or GigE peripheral, revealing with it being direct device that I can't understand. Despite this I can acquire images, but I am limited to 320 x 240 format and change the type of image (RGB, UYVY etc) causes an error. Once again, oddly enough, I can use "enter and select mode example VI" which should only be compatible with IEEE 1394 cameras.

  I'm not sure why LabVIEW is not seen this card properly, I contacted Imaging source who were also intrigued by the fact.

  Any information on how this could be resolved would be much appreciated.

  Thanks in advance.

  Hi OCastell,

  With this Council Imaging Source, the only interface supported with drivers of NI Vision Acquisition is through using IMAQdx DirectShow interface. It is possible that their DirectShow driver does not properly support all of the capabilities of their Council. Given that ICR software and TWAIN support can be routed to a different implementation of one of the DirectShow support, you can see the different features available. Unfortunately, you probably go through Imaging Source to determine why their DirectShow driver does not support the full resolution. You can confirm that it isn't IMAQdx this limiting trying other software such as Windows NetMeeting or AMCAP DirectShow and see what capture resolutions are listed.

  Because the DirectShow interface is managed by IMAQdx driver, it will not be detected as a framegrabber IMAQ using the IMAQ driver. This is expected since it fits in the same category as firewire and GigE Vision cameras and is supported with the IMAQdx driver instead.

  The "Grab and select the Mode" example VI isn't really specific FireWire, although he was certainly intended to highlight the various video modes that generally expose FireWire cameras. Since the DirectShow devices are similar and have several selectable video modes, it's why he's probably working. In any case, IMAQdx abstracts usually differences between all supported camera types and in general a single VI can run on all cameras IMAQdx-taking in charge unless you rely on buses or the camera-specific features.

  Regarding Vision Assistant marking the camera as 'IEEE 1394 or GigE', I think it's just an aesthetic issue (which may already be fixed in new versions). When IMAQdx was out, these are the supported types of cameras and so Vision Assistant was trying to say clearly what driver was used for the type of device. Now that IMAQdx supports a multitude of new interfaces (including DirectShow and some IP cameras) that the label is inaccurate.

  Finally, looking at the specs for this capture card, it looks like a standard reference BT878/848 model and then you could try potentially replace your Imaging Source driver with one here:

  http://BTWinCap.sourceforge.NET/

  I used this with a with IMAQdx BT878 capture card and can get it to capture an image full resolution (but of course, your results may vary...). It goes without saying that this solution using DirectShow is much more limited than using an industrial camera on 1394/firewire or a framegrabber IMAQ.

  Hope this helps,

  Eric

• Wireless USB adapter is not correctly detected by XP

  Hello, I have Windows XP SP3 computer in office. I also have a Cisco AE2500 wireless adapter. When I conect the adapter it detects but I go to the Device Manager and it shows as 'unknown' and with a yellow exclamation point. Most of you would say update the drivers, but I already have and they are drivers xp and ive tried uninstalling and reinstalling and it still does not work, please help if you can and thank you!

  I also try with n-300 net gear

  They both work because I tried on other xp computers

  [IMG] http://i41.tinypic.com/2pyst1f.jpg [line]
  http://I41.Tinypic.com/2pyst1f.jpg < view="" snapshot="">

  Hello

  ·         Did you try to plug the device into the other USB port and check if it works?

  ·         Another USB device works fine on the computer?

  Follow these methods and check if it works:

  Method 1:

  Follow the form of measures troubleshooting article and check if that helps.

   

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Method 2:

  I also suggest you to follow the steps in this Microsoft KB article troubleshooting and check if that helps.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Method 3:

  The main reason for an unknown device to display in your device manager is because you have a device that is not working properly. To resolve this problem, obtain an updated driver for the device. For more information, see this article:

   

  How to troubleshoot unknown devices listed in Device Manager in Windows XP

  http://support.Microsoft.com/kb/314464

• Win7: Administrator is not correctly recognized

  Hi people

  I have a little problem with my Windows 7 Professional. The starting point for this were two questions:

  (1) I could not create new users, as the correct files and registryentries have not been created.

  (2) using the my separate administrator account (that I don't use usually) I can't change my preferences for Windows Update. It does work with the admin hidden either. I get information that "some preferences are only to be changed by administrators.

  The first problem I could solve actually give everyone more rights for users / default. Not the best solution, but I guess I can live with that.

  The second problem that I couldn't yet solve. I activated the hidden administrator, but still had no permission to modify preferences. If I type mmc at the command line I get an empty window now (actually got a window not empty when the hidden administrator was not activated yet, so I'm a little worried about it). The ProfileList in Windows NT folder in the registry has an entry for each user, so it seems that things were good there. Running Sfc/scannow does not return anything. Although I can't change preferences for Windows Update I always seem to be able to install programs and set other preferences using the hidden admin or my own admin user. I don't really know why this happened, but of course, I would be happy if someone could give me a clue as to how to solve this problem.

  see you soon

  S4nya

  Hello

  I suggest you use the construction in the administrator to create a new administrator account and check if everything works correctly in the account.

  The built-in administrator is not to work from, but to help create another account. Built-in Administrator account should not be used as a normal administrator account, it is not recommended as not all things or options will work from there.

• Cam sex is not correctly recognized on Satellite L500D

  Hello

  I have a Satellite L500D when I failed to connect in the web cam app appears and say web camera initialization. Please check your device and restart the application or computer.
  I press ok and the application closes down so I checked the Device Manager and there is no camera device.
  I downloaded the driver twice and that you don't always see the driver in the Device Manager box.

  Hello

  That s quite strange.
  What is your laptop pre-installed with original Toshiba (factory State) recovery image?

  Everything is possible and it can be faulty cam but the best way to find out is to install the OS using Toshiba HDD recovery facility. After doing this, you will have to new factory condition.
  With the factory settings, each hardware component should work fine.

  Do not install any additional software. After finishing OS installation webcam control functionality to see if the same thing happens again. If there is the same situation contact the closest service Toshiba and explain the situation.