DV7-3140el - RAM upgrade
I'm trying to upgrade the provided RAM 8 GB 4 GB standard memory.
So far, without success.
The system is that a Core processor i5 on an Intel PM55 chipset, (with stock RAM..) is woking very well.
The RAM provided is working regularly at 1066 mhz CL7 4 GB 2x2gb PC3 - 10600 DDR3 - 1333 CL9 S Hynix (should be PC-8500, I understand..).
Due to the limitation of the system to 8 GB, I tried the following configuration:
just to test... [- 2x8GB Corsair DDR3-1333 PC3-10600 CL9 (CMSA8GX3M1A1333C9)
--> Bios installed memory: 6 GB... [BIOS MEM Chek Ok, BSOD and reboot immediately to Win Start (Win logo on screen)]
- 1x8GB Corsair DDR3-1333 PC3-10600 CL9 (CMSA8GX3M1A1333C9)
--> Bios installed memory: 8 GB... BIOS MEM Chek Ok, BSOD and reboot immediately to Win Start (Win logo on screen)
- 1x8GB Corsair DDR3-1600 CL9 PC3-12800 (CMSX16GX3M2B1600C9)
--> Same as above.
- 2 x 4 GB Kingston DDR3 - 1600 CL9 (HX316LS9IBK8/2 -certified on the Web site to work @1066 mhz CL7)
--> Same as above.
- 1x4Go Kingston DDR3-1600 CL9
--> Same as above.
- 1x4Go Kingston DDR3 - 1600 CL9 + 1x2Go Stock RAM--> same as above.
What Miss me? What are the specs of RAM just for this system?
I tried searching for "certified memory", but no ship reseller in my area and specifications provided for my sys are always "4 GB 204 pins SODIMM DDR3 PC3 - 10600 1333 MHz"... which, if correct, should be the same as my Kingston RAM.
Thank you very much in advance for any suggestions you may have
Concerning
Marco
Note. All banks of memory are from or have been tested also on other sys and are perfectly working.
He missed. I'm sorry. Here is the Manual:
DDR3-1066 PC3-8500 is aka what it takes.
8 GB in configuration 2 x 4 GB is the maximum and it means no more than 4 GB so this explains all problems with 8 gig of add-on modules. You need to duplicate the modules that work as well as possible.
DDR3-1600 will simply not enough downclock so do not use it. As laptop computers HP tend to like low density memory and I don't hear in there 8 small blocks of black memory on one side, 4. Hynix memory that works is not low density with 8 blocks on one side?
Tags: Notebooks
Similar Questions
-
Pavilion dv7 2160ep: RAM upgrade
Hello
I have a hp pavilion dv7 2160ep.
I want to upgrade the RAM to maximum capacity.
Can you tell me what is the maximum I can put?
8 GB is the maximum capacity.
This is the Manual:
It takes memory DDR2-800, which is very expensive. Longer $200US for 2 x 4 gig modules.
-
HP pavilion dv7 4150ea: Hp pavilion dv7 4150ea ram upgrade need help.
Hello
I want to upgrade my RAM on my laptop, it's a HP pavilion DV7 4150ea. The vehicle currently has 1x4Go pc3 10600 ddr3 sodimm micron s 1333 mhz in and I want to move to 8 GB which tells me is the most it can manage. What I want to know is will be any ram that I buy with the above specifications work in my laptop, or do I have to take other things into consideration as well.
If someone could give a link or a response, it would be greatly appreciated.
Thank youI went to the Crucial site to see what they recommended. Here is the Web page and the information they give
-
HP Pavilion dv7 1199ev RAM UPGRADE
Hi I have 4 GB of ram, and I would like to know if I could upgrade to more memory ram or even higher MHz ram.
You could list me some options?
Thanks in advance
Yes, you can upgrade to 8 GB, but it is very very expensive.
You can use memory DDR2-800 also known as PC2-6400, 8 concerts which will be around $400US.
I can't imagine what you're doing with your laptop where 8 gigs will do something for you that will not 4.
-
HP pavilion dv7 3110ea: RAM upgrade
Hello. Exactly can what kind of ram I install to my model? And 8 GB max per slot? I would add as much ram as possible. Is the maximum of 8 GB for my machine or it was maximum date of manufacture?
Thank youFrom the Manual:
2 memory customer module accessible/upgradable slots Supports twin DDR3 memory, 1066-MHz supports up to 8 GB of RAM in the following configurations: ■ total system memory of 8192 MB (4096 MB x 2, dual-channel)
Max is 8 GB (2 x 4). Your care if you have 4 or 2 x 2, so you need to buy 2 new modules 4 GB each.
Memory (DDR3 1066 MHz) ■ 4096 MB 575480-001
'How to' on pp. 4-17. 8 GB is always maximum. It is a function of the chipset. It is essential that you get memory low density 8 black blocks on the side of the module.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
HP pavilion dv7-4285dx: ram upgrade
I would like to know if I can get 6 GB of ram to 16 GB of ram on my HP Pavilion dv7-4285dx W7 64 bit, Samsung 850 Pro. Thank you
Hello
The maximum is 8 GB of RAM, because this is the limit which is supported by the processor.
Intel® Core™ i5 - 460 M Processor
Memory maximum size (according to the type of memory) 8 GB Concerning
-
HP pavilion dv7-1070ee: Ram upgrade hp pavilion dv7-1070ee
Hello
IAM trying to upgrade my computer laptop memory, but I do not know what to buy dose this model uses ddr3? Or ddr2 onlyDDR2-800 SO-DIMM and you can see that it is very expensive. The laptop will have up to 8 GB, but that is very expensive.
-
The Task Manager does not recognize the ram upgrade
Hello HP community!
Well, it seems that I have a problem with my ram upgrade. My system came with 2 GB of ram, and I had to upgrade (with another 2 GB), I am using programms like autoCAD, 3dsmax, photoshop, etc who have special needs on the RAM. Here's the problem; While the bios memory being recognized (4096 MB), what the task manager of the total physical memory is only 2046 MB! I also did the update to the BIOS, but it didn't work. The new memory I plugged in has the same features with one installed. The only difference is the manufacturer, the new is Kingston.
Here are the characteristics of my system;
Operating system installed: Windows Vista 32-bit
Product name and number: HP Pavilion dv7 - 2030ev
- Motherboard: Quanta 3624 intel PM45 (supports up to 8 GB of ram)
- CPU: Intel Mobile Core 2 Duo P8600 2.40 GHz (64-bit Architecture)
- RAM: 2 GB DDR2 PC2-6400 800 MHz 6.0 CASE Samsung latency
- BIOS: F.46
The RAM I bought is:
Latency CASE of Kingston DDR2 PC2-6400 800 MHz 2GB 6.0
(The package information to be exactly: KVR800D2S6 / 2GB PC2 - 6400 CL6 SODIMM 200 - Pin)
I also mention, I tried the only Kingston on a Slot and the system worked without any problems...
I would be so grateful if you could help...
Thank you in advance,
Nick Chatzikonstantinou
Hi, Nick:
One of our experts at the top of the forum (DavidPK) page suggested that you look at this solution to the question of memory you meet...
I quote David:
"In the system startup tab Configuration screen, the Advanced Options, it proved that there is a check mark in the maximum memory box. Once removed and the applied change, Windows recognized all the Ram (less the reserved) after the reboot. »
If please give than to try and post back and let us know if that frees a memory system for you.
Paul
-
Satellite Pro C850-1HD: valid guarantee after RAM upgrade?
I work with a laptop Toshiba Satellite Pro C850-1HD in the warranty period, and I would like to know whether to extend the warranty for laptop RAM is maintained.
Thank you
> I would like to know whether to extend the warranty for laptop RAM is maintained.
RAM upgrade does NOT affect the warranty.Here you can find instruction and nice workaround how to replace Toshiba Satellite Pro C850 modules series
[Satellite Pro C850 / L850 - Memory Module replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU2603BZ0000R01.htm] -
Satellite R630-13F - RAM upgrade
Hi all
My R630 is faced with a newly added software for Photoshop (CS5 version). Whenever it is quite slow to open and try to merge the picture for the economy.
I was wondering if I can upgrade the RAM. With a very limited knowledge, I would like to know if I need to buy an additional (if there is a vacancy for it), or I need to get one to replace the old.
I think increasing the memory to 4 GB, but I was wondering if it will be enough for Photoshop. Thanks a lot for any input.
Best wishes
Tim
Hey Buddy,
RAM upgrade is not a problem because it is easy and can be done in a few minutes.
Satellite R630 has Intel HM55 chipset, and the maximum capacity is 8 GB. This means that you can install 4GB module in each memory location. Also an upgrade to 4 GB is not a problem, you can keep your 2 GB module and just buy a new 2 GB module. The module DDR3-10066 part number is PA3676U-1M2G.
If you have more questions just after, again :)
-
Satellite C670D-10W - RAM upgrade
I recently received a Satellite C670D-10 w, which has 2 GB of memory. I would like to add a module of memory, but I can't find any mention of this on the site of toshiba of what kind, etc.
Other that, 'don't use that toshiba has approved' modules.Can which module I get for this machine?
TNXHello
For the RAM upgrade, you can use follow RAM modules:
1 GB DDR3-1066 PA3675U-1M1G
2 GB OF DDR3-1066 PA3676U-1M2G
4 GB DDR3 - 1066 PA3677U-1M4G
-
17 - p120wm: hp laptop 17-p120wm RAM Upgrade DIY or shop service
I can't find information about the max ram upgrade or how to remove what I can buy new ram and install it myself.
It has the factory installed 4 GB SDRAM DDR3L (1 DIMM).
I use a large workshop and if I can't install it myself they will for me when I can buy the max ram for this model.
Thanks in advance for your comments.
KIM
Maximum RAM memory supported 8 GB
Memory SODIMM slots two - NOT accessible customer / extensible DDR3L-1600 dual channel support DDR3L-16009 single channel support DDR3L-1333 channel simple Support (DDR3L-1600 downgrade DDR3L-1333) supports up to 8 GB of RAM in the following conƭgurations & #29;
Total system memory of 2048 MB (2 048 × 1).
Total system memory of 4096 MB (4096 × 1).
Memory system total 6144 MB (4096 x 1) + (2 048 × 1)
8192 MB total system memory (8192 × 1).
Service Manual:
http://support.HP.com/us-en/product/HP-17-P100-notebook-PC-series/8499335/model/8888513/manuals
http://h10032.www1.HP.com/CTG/manual/c04777516
Kind regards.
-
Satellite 3000 - X 4: Question about RAM upgrade
Hi all
I'm looking for more information on how to upgrade the RAM for my SATELLITE S3000 - X 4 (120 MB RAM, 14 GB HD I think!). Here's a little history...
This laptop is about 5 years old, and I'm hoping to speed up a bit. I don't want to buy a new computer because she usually serves my needs.
I emptied my hard drive files and unwanted programs. And I ran Jv16 Power Tools to clean the registry and minimize starts the process.
It's always a little slow and if I am considering upgrading the RAM because I think I can do this for about £50. My questions are:
What type of upgrade RAM should I look to buy? (This laptop have 2 RAM "plug-ins" or just one?)
What is the size of RAM upgrade is the maximum an S3000 - X 4 could face?
Could a novice like me to adapt to the style DIY upgrade?Thanks for any help you can offer!
Gabrielle
Hi Gabrielle
He is old enough. I looked for some info, but unfortunately I n t have not found much. The device can use the 512 MB of RAM, and you can use 2 sticks of memory. I'm not 100% sure but I think you can use the module with tracking number PA3086U - 1. 25 M.
The unit is not known to me but please check the underside. On most units, you can find coverage of memory.
-
Pavilion dv6t-3000 CTO Ente: Pavilion dv6t-3000 CTO Entertainment Notebook PC - RAM upgrade
Hi all
Happy new year 2016!
Need help on RAM upgradation for dv6t-3000 CTO Notebook PC (laptop).
--------------------------
My system info:
Model: HP Pavilion dv6 Notebook PC
Name of the operating system: Microsoft Windows 10 home
OS version: 10.0.10586 n/a build 10586
OS configuration: Standalone Workstation
OS Build type: multiprocessor Free
Processor (s): 1 processor installed.
[01]: Intel64 family 6 model 37 Stepping 2 GenuineIntel ~ 2133 Mhz
Intel (r) Core i3 CPU M 350 2.27 GHz
Slot 1: 2 GB Samsung 1067 MHz MEM
Slot 2: 2 GB Samsung 1067 MHz MEM
Motherboard: 144 c 65,38Virtual memory: Max size: 7 862 MB
Virtual memory: available: 2 319 MB
Virtual memory: in use: 5 543 MB(bought in 2010 HP online shoppig)
--------------------------I wanted to be the existing 2x2gb RAM upgraded to 2 x 4 GB.
In the maintenance and the service manual (c02657339.pdf) information, following a very generic info is seen:
-----
Two SODIMM slots for customer-accessible/extendable
DDR3 PC3-10600 1333 MHz memory
Supports dual channelSupports up to 8 GB of memory system in the following configurations:
Total system memory to 1024 MB (1024 MB x 1)
Total system memory of 2048 MB (1024 MB x 2, dual-channel)
Total system memory of 2048 MB (2048 MB x 1)
Total system memory of 3072 MB (1024 MB x 1 + 2048 MB x 1)
Total system memory of 4096 MB (2048 MB x 2, dual-channel)
System memory total 6144 MB (2048 MB x 1 + 4096 MB x 1)
Total system memory of 8192 MB (4096 MB x 2, dual-channel)
-----Analysis of the essential:
Maximum memory: 8192MB
Recommendations of the participle did not «...» PC3-10600... ».-----
I've visited the forums, recommendations are given by competent persons for purchases of RAM.Issues related to the:
1 is my laptop - portable, compatible computer for the upgrade of the Rams the existing 2 x 4 GB 2x2gb?
2. following has been recommended for a similar case in the forums (for a slightly different configuration):
http://www.Newegg.com/product/product.aspx?item=N82E16820231342(1.5V)
G.SKILL 8 GB (2 x 4 GB) 204-pin DDR3 SO-DIMM DDR3 1333 (PC3 10600) laptop memory model F3-10600CL9D-8GBSQ(Not sure if is 1, 5V for my machine)
Can I use the same (2)... or else want to recommend pieces for 2 x 4 GB with the purchase that I don't get no exact corresponding to those. One or the other setting is different.Thanks in anticipation,
SriniYour request has been covered in the next more old thread.
-
Qosmio G20-139 - Ram upgrade question
Hi my name is m.k.ash
My equation on my Qosmio G20-139 PC Ram upgrade
In prouction specifications said maximum extension 2048MBI can upgradeed 4 g or not? or only 2048 max.
Thank you very muchHello
If the manual indicates that only 2 GB are possible then you can move the RAM only to 2 GB (2 x 1 GB module)
I thing the laptop supports the Intel 915 PM chipset and it supports 2 GB of RAM.
See you soon
Maybe you are looking for
-
My A1387 model is locked to Photo Stream ignore or settings
My A1387 model is locked to Photo Stream ignore or settings and will not respond to the keys on the screen or the "slide to unlock" or "slide to power off". Any help would be appreciated...
-
I recently updated my system to Windows 7 Pro 32 bit for Windows 7 Pro 64 bit. The Simple communication controller has no drivers installed. The problem is: PCI Simple Communications controller PCI\VEN_8086 & DEV_29D4 & SUBSYS_281E103C & REV_02\3 &
-
DDoes anyone know what is the USB cable?
-
I turned off my helmet by accident. Every time I have it plugged in the headphones, two configuration windows appears and it's boring. In order to get rid of the pop ups I have disabled the helmet. The speakers work fine, but I prefer to use the helm
-
At the start of XP, get error "application rtl70.pbl could start.
get this message that an application was able to start on another start-up that that the model seems to work normally running xp service pack 3