dv8000 AC adapter problem

Similar Questions

• The connection has failed. Limited connectivity. Adapter problem

  Hello

  I use an Acer Aspire One Laptop that suddenly started running very slowly and taking a lot of time to stop and restart. I want to update all the drivers and software malware but cannot currently get online.

  When connecting to my usual wireless network I get the error: "the connection has failed. This computer currently has limited NETWORKNAME connectivity. "

  If I click on "solve problems" the end result is "it could be a problem with the driver for the wireless network adapter".

  Connection via an ethernet cable is not possible.

  If I run ipconfig/all, I get this:

  Suffix main Dns: (empty)
  Node type: hybrid
  Active IP routing: no
  WINS proxy enabled: no

  Card tunnel Teredo Tunneling Pseudo-Interface

  State of the media: Media disconnected
  Suffix the connection-specific DNS: (empty)
  Description: Teredo tunneling Pseudo-Interface
  Physical address: 00-00-00-00-00-00-00-E0
  DHCP enabled: no
  Autoconfiguration enabled: Yes

  Grateful for any advice.

  Thank you very much
  Sam

  Hello Sam,.

  It seems that this may be a problem with your network driver, may you please follow the steps below.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-GB/Windows/fix-network-adapter-problems

  If you perform the steps on which solves your problem with internet and your computer is still slow, I recommend you to install and run a scan with the following programs:

  Malwarebytes Anti-Malware, Junkware removal tool and AdwCleaner.

  Thank you.

• Strange Magsafe adapter problem

  I have a Macbook Pro 2011 and recently started using a new charger/adapter magsafe like old wore out. Initially the new charger worked fine but then the green light stopped show, and he stopped to load my Macbook. In order to isolate the problem, I borrowed magsafe adapter/charger my daughter and it worked fine and my magsafe adapter works fine on his Macbook. So what's past? If it's my computer then surely his charger would work either, but if it was my charger then how is he's working on his Macbook?

  I'm totally confused with this one... I have reset the SMC, but beyond that, I completely disagree... If anyone can shed some light on it or something, I would be very grateful!

  Magsafes are available in three or four sizes (power).   Yours is correct for your machine?

• laptop HP pavilion g6: ralink rt3290 802.11bgn wi - fi adapter problem does not not when turn on pc

  Hi iam using windows 8 64-bit HP pavilion g6 my adapter ralink rt3290 802.11 wifi bgn does not work for a few days because of the sudden closure of the pc by the battery problem, whenever it's strcuked reason more to heat or liquidated suddenly drops ralink adapter not worked for some time, now it not group days I updated my driver of latest vesion by the Device Manager in windows to the latest version still problem persists, I have to reinstall it

  Hi @eswar_krishna,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with the wifi adapter. I'll be happy to help you.

  The following pages are useful for troubleshooting wireless connectivity problems.

  Troubleshooting wireless network and Internet (Windows 8)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Forget the network: (Windows 8)
  1. press Windows Key + C
  2. click on settings.
  3. click on change PC settings.
  4. click on network on the left.
  5. click on manage known networks.
  6. click on the name of the network.
  7. click on forget.
  
  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the Winsock Catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• USB Bluetooth adapter problems

  Hello

  I recently got a new Toshiba Tecra S1 (PM725) and an adapter Bluetooth usb (with More4you software).

  But I can't make it work with my nokia 6310i

  I installed new battery BT (Bluetooth Stack for Windows by Toshiba (3.10.00).

  Analysis of my nokia BT Manager, but when I want to connect to it, it immediately disconnects (after that I supported on accept connection on my nokia pairing) and the BT Manager gives the error: a not to connect to the following service: Dial-up networking. Connection request failed.

  I only installed the BT stack (from dir... BT package /US/) because when I run the installer from the main dir, it does not recognize my BT adapter. He keeps asking to put the int bt adapter.

  I had once it works, but with the next time you start it failed once again.

  Could you please help me?

  Hello

  Therefore, it is very difficult to say what the problem is. In my opinion, it is very important that
  -Adapter USB Bluetooth is installed correctly and working properly
  -Nokia must be added and installed as a new modem
  (The Nokia modem driver must be installed)

  It is not easy to help you because More4you and all settings and options there are unknown for me.

  I think before you start doing anything check there at - it problems with the USB adapter. Next step is the installation of the Nokia modem driver. I'm sure you have some CD or you can download it from the manufacturer's website.

  Please be careful with COM ports (you can use the standard port). In my case the standard port was COM 40. The same port, you must choose to install the modem driver.

  Try again. I'm sure that there is a problem with the settings. Check all out them again.

  If you discover that a problem was it please write again.

  Good luck

• Satellite P15-8409, Atheros wireless network adapter problem

  Hello. I'm having a frustrating problem with an old laptop Satellite P15. I restored the phone to default settings using the recovery disk that the system was working very badly. After that, the wireless network adapter has stopped working. In the Device Manager "Atheros AR5001X + Wireless Network Adapter" is marked with a yellow exclamation point. In the menu properties, under general, the State of the device the following is listed:

  The device cannot find enough free resources that it can use (code 12)

  The operating system is Windows XP Home Edition. The same problem has been present in SP1, SP2 and SP3. I also updated the BIOS to V2, but it also did not help.

  At work, we use a wireless internet connection. At home, I have a DSL connection. Curiously, when I plugged the network cable to the House, the yellow exclamation mark disappeared and a wireless connection icon appeared in the network connections window. I assumed that the problem has been resolved by updating to Windows; However when I brought the computer in the office, the wireless adapter was once more in the State I described.

  I searched the internet for the same problem, but was unable to find anything. I would be very happy to help.

  all the best,

  James

  BIOS version is installed on your machine? And you have you recently changed some hardware etc...?

  I don't know what it could be, but in the worst cases, the wlan card has certain shortcomings. You can check this by getting somewhere such an atheros wlan card or intel and install it instead of the one installed.

  Maybe the exchange of cards should solve this problem?

  Welcome them

• Pavilion g6: Solutions for Ralink RT5390R 802.11 bgn wifi adapter problems r 4 Windows7, Windows 8-10?

  The screen message is ""RT5390R 802.11bgn Wi - Fi adapter Ralink has problems of driver or hardware-related " "

  In this forum, the given solution is for Windows 7 and 8. The same link he will solve for Windows 10 or is there another solution?

  Hello:

  There is a W10 driver, you can try for this model of the wlan card.

  5.0.57.0 Rev.A (June 18, 2015)

  Microsoft Windows 10 (64-bit)

  SUPPORTED DEVICES:
  802.11n wireless PCI Express Card LAN Adapter
  MediaTek MT7630E 802.11bgn Wi - Fi adapter
  RALink RT3090 WiFi 802.11b/g/n adapt
  Wi - Fi 802.11b/g/n Ralink RT3290 adapter
  WiFi 802.11a/b/g/n Ralink RT3592 adapter
  RALink WiFi 802.11b/g/n RT5390 adapt
  RALink WiFi 802.11b/g/n RT5390R adapt

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71571.exe

• HP Paviliong9 notebookpc: battery or plug in pin adapter problems

  Laptop will not load.  States of icon is connected but does not support.    Has begun charging for less than 30 seconds maybe 3 times only, then goes to not charge mode.  Up to 60percent. My Jack works the ac adapter is only lukewarm. I can't calibrate my battery, it must be between 99 and 100 percent. What is my profile or is it my battery? Don't know? Help, please!

  @bigmikes1

  Please post on the Forums of HP,

  I'd be happy to help you

  As I understand it, the laptop is plugged into the adapter/charger, but it does not load

  Don't worry, though, as I have a few steps below that should help you to solve this problem:

  Disconnect the load and use the laptop until the battery drains in 15%.

  Turn off the laptop and turn it on again after 30 minutes.

  Reinstalled compatible Microsoft ACPI Control method battery in Device Manager,

  Restart the computer, and the problem should be solved.

  If you are unable to reach a resolution, please click on accept solution to help others with similar issues.
  If you like my assistance, , please click on the thumbs up icon.
  The two icons are below this post.

  Keep me posted and I wish you a good day
  
  Kind regards

• Mid-2015 MB Pro Power adapter problems black pine

  I had at least 10 portable Mac over the years and this is the first time I've seen that happen.

  The second axis on the adapter is black and will not charge the laptop. He's okay, sometimes if you stand up straight but it's absolutely not funny.

  

  You can easily see the problems with the charging port and adapter...

  

  Someone at - he seen this before?

  Does not seem an easy solution.

  All advice appreciated.

  Thank you

  Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

• Z580 - WLAN adapter problem

  I've got Lenovo IdeaPad Z580, with Core i7, 4 GB of RAM and 1 TB of HARD drive processor.

  A few months ago, I noticed that my BONES sometimes would freeze (make this beep sound freakin ') if I moved my computer too fast in my office (weird). She got worse a few weeks ago and seems to be somehow connected to my wireless network adapter.

  It especially simply - nothing works. Switch WLAN disappears from the BIOS configuration, etc., like it wasn't even there. If I'm lucky (as I am now), it would work somehow. All of a sudden appears again in the BIOS etc. I can even use it on my Windows 8, but... If I propose a little my laptop, it will suddenly freeze and restart causes WLAN adapter not in the system at all, or the connection is de-energized ("metered" stuff etc.). Restart adapter according to the results of system in "find no WLANs", wlan switch endangered or gel.

  I tried to reinsert the WLAN card, it sorta fixed stuff when I did it for the first time, I had a week or two without a problem, but he returned and reintegrated support is no longer.

  First question what I can do with this adapter WLAN problem?

  Second question is - while doing all this thing reinserting, my screws are a little bare now (but not completely, it is possible to get them unscrewed without any problem) because I have not noticed my screwdriver is broken and ruining. My laptop is still covered by the warranty? I do not have removed or broken any warranty seals in the process well, just the screws.

  I forgot to mention, by WLAN adapt is Atheros AR9485WB-EG.

  Information on repair mentions setting parts disconnected.

• Pavilion p7 - 1108p wifi adapter problem (running 8.1 Win)

  Expanded and published, the lack of resolution...

  Pavilion p7 - 1108p, running Windows 8.1.   Adapter Wi - Fi keeps releasing sporadically and without apparent reason.  I opened the network and sharing Center, and under active networks, click connections, and then click diagnose.  It resets the adapter and all is well.  I have two other computers and a tablet on this network, and none of them has this problem.  Please advise what the question might be: I have something set wrong?  Do I have a hardware problem?

  More info: when I use the troubleshooting tool to diagnose and reset the network card, I get 1 of 2 messages.  It's either.

  "" Wi - Fi"is not a valid IP configuration",

  or a message to both parties,

  "The connection between your access point, router, or model of cable and the Internet is broken. ” ;

  "The default gateway is not available "

  Please advise as soon as possible, because it is critical for having us this machine on-line 24/7. Thank you!

  You are the very welcome.

  If you have the problem fixed in a hurry, I'd consider having a network adapter wireless usb external of your choice.

  I use the Linksys AE3000 adapter dual band usb wireless with my HP 8200 Elite CMT on W8.1 64 bit and it worked without problem for months.

  It works great using the drivers W7 that accompanies it.

  Otherwise, you will have to wait for who knows how long for Mediatek fix the driver.

  You can disable the card in the Device Manager or physically remove it from its support if you want to add a usb wireless network adapter.

  Some of the reviewers said it did not work with W8/8.1, and some have fact.

  All I can say is that I had no problem to use drivers W7 supplied on mine.

  http://www.Newegg.com/product/product.aspx?item=9SIA24G1E39247&cm_re=AE3000-_-33-124-477-_-product

  Or you can get other brands...

• Pavilion p6210y: SATA host adapter problem

  Hey guys,.

  I think I found a problem with the SATA host adapter in a desktop Pavilion p6210y.  I find it difficult to restore the system after a hard drive replacement, and I discovered that if I have TWO hard drive and the CD drive unplugged so the machine will start.  If I plug the hard drive OR the CD, then the machine hangs on the HP BIOS screen.  Output voltage of the PSU is normal.  I think the guest card (motherboard) is toast.

  I did a little research, and it seems that it is a known problem with this motherboard.

  HP P6210Y does not detect hard drive

  This link may be the inlaid right.

  Card failure causes a MCP chip overheating, which controls the SATA ports.

  Here are some links:

  Ports of SATA HP Pavilion p6210y

  M2N78 - the motherboard does not see my records

  If you found my answer helpful please say thank you by clicking the s cursor Up icon. Thank you!

• 2230-N-Intel wifi adapter problem. stops on the map

  I just bought a laptop HP 17-j029nr.  He has a wifi card intel proset N-2230.  I have already returned your laptop under the return policy of 3 weeks for the same problem.  I didn't know what was wrong, then I discovered that the issue on the last day I could return it, so that seemed to be the best course of action.  The new laptop began to have much faster than the previous issue.

  The problem seems to not have a link with the windows updates, but not spend 8 to 8.1.

  In the beginning, everything is normal.  Good solid connection on my network for this device and all my devices.  Then, I lose the internet connection.  On the notifacation of wifi, there is a!, open it and it only shows my network, and it said limited.  I can ping all other computers on my network or my gateway, it seems that there is not any connection at all.  If I disconnect, then says no available networks.  A reboot will get me back online.

  Everything's fine again for 10 minutes up to 2 hours.  Then he repeats, said I have a metered, but I have no connection, and I have to reboot for it to come alive.

  A google search reveals that this is not a problem rare, nor specific to HP laptops.  He also had a decent knowledge base of solutions I've tried, all to nothing does not.

  I tried a few different versions of the driver.  First, I tried the latest version of the driver.  Then I tried all the drivers that were made for windows 8.1 64-bit.  I came across an ad that suggested using the Intel PROSet/Wireless WiFI connection utility.  I defy anyone to get this application installed right the first time.  My limited knowledge of windows 8.1, my networks are managed by this application.  The only reason why I believe that it is because it runs in my sandbox, and if I right click on it, it gives me the possibility to 'use windows to manage wifi"yet, my windows wifi Manager runs as well.  I can't understand how to disable wifi management service without disabling other services necessary to use the card.  So, Yes, I have something not configured correctly, but the behavior I get is the same.  After some time, whatever it is, makes my life hell, continues to occur.

  Any thoughts on why this is happening?

  Being a miniminalist, I try to remove all the junkware that comes with the computer.  One of the things that I removed has some star power demand.  He had the blue background with the White Star, the standard "Energy Star Rated" sticker on a device, you will see.  A quick search online doesn't have reviel a lot on the application, but immediately got me into the hell of Googling turning all kinds of results I don't care at all.  So I removed the program.

  Earlier I was in the properties of the device and I noticed the power management tab and behold, it has been verified to allow the computer to turn off the device to save power.  I don't know if this is the solution, but at least it's something.  I will update, and I promise with something better than, "nevermind, fixed it.

  -L' sad HP user

  New adapter wifi solved the problem. Too bad HP support sucks so I have to use different elements to get the machine to work.

• 4 - 1035tx ultrabook envy: unable to connect to the internet (adapter problem)

  I tried to troubleshoot it, it shows me the following.

  

  Go to Device Manager, gave me the following.

  

  The main issue here is that, I would need cable/WiFi to download drivers, but it is not recognizing it. (Adapter that needs to be downloaded, but I can't, because I can't access the internet in the first place.)

  Here is the data.

  Standard VGA graphics card

  PCI\VEN_1002 & DEV_6840 & SUBSYS_1895103C & REV_00

  PCI\VEN_1002 & DEV_6840 & SUBSYS_1895103C

  PCI\VEN_1002 & DEV_6840 & CC_030000

  PCI\VEN_1002 & DEV_6840 & CC_0300

  Ethernet controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1895103C & REV_0A

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1895103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  Intel (r) 7 series/C216 Chipset Family USB 3.0 eXtensible Host Controller Installation disk - 1E31

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_1895103C & REV_04

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_1895103C

  PCI\VEN_8086 & DEV_1E31 & CC_0C0330

  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  Network controller

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C & REV_01

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C

  PCI\VEN_14E4 & DEV_4727 & CC_028000

  PCI\VEN_14E4 & DEV_4727 & CC_0280

  PCI device

  PCI\VEN_10EC & DEV_5289 & SUBSYS_1895103C & REV_01

  PCI\VEN_10EC & DEV_5289 & SUBSYS_1895103C

  PCI\VEN_10EC & DEV_5289 & CC_FF0000

  PCI\VEN_10EC & DEV_5289 & CC_FF00

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1895103C & REV_04

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1895103C

  PCI\VEN_8086 & DEV_1E3A & CC_078000

  PCI\VEN_8086 & DEV_1E3A & CC_0780

  Unknown device

  ACP\HPQ0004

  * HPQ0004

  Hi @sai1234,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Thank you for posting. I read your post, and I understand that you need to install the wireless network card drivers and the network card. I wanted to help.

  Please download from http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-Ultrabook-4-1000/5269312/model/5272688 on a USB key. Then copy these drivers of the USB to your CRAVING Ultrabook 4-1035tx hard driver for installation.

  Let me know how it goes.

  To say thank you, click on the "thumbs-up". Accept the post as a solution, if your problem solved, so that other people have the same problem can see it.

  Kind regards

• Disk W530 Hard Drive Bay Adapter problem

  W530 ordered on 14/01/2014. I replaced the 500 GB with a SSD hard drive and wanted to use the reader HGST it came with a disc of Nimitz adapter. I can delete the partition and create a new volume, but it fails during format. It fails even when it is formatted a ready to use.

  I have a 250 GB drive at 5400 RPM Hitachi which works very well in the Bay. With the help of a USB drive Bay I can delete the volume and rebuild the drive of 500 GB. Why do I have a problem with this drive in the drive Bay?

  I plugged the hot formatted disk and it lights up immediately, I backup on it now. I don't know why I got so many problems earlier.

  Thanks for the reply.