DVD burner error Code 19 problem solved of United Nations

Similar Questions

• CD/DVD burner, error Code 19 in Windows 8

  Hi so I have recently upgraded to Windows 8 and low and here's my DVD rom has stopped working. I got a Microsoft representative trying to solve the problem for an hour and a half for him to tell me that Dell needs to upgrade their driver and basically I'm ADMIN NOTE: profanity removed according to the TOU >. Does anyone else have other ideas on how to get it to work? (PS - "Fixit" of Microsoft program does not work and the latest drivers I found for the device came from 2011 and not functional)

  -Dave

  Have you tried to delete upper and lower filters in the registry manually? It's the next thing I would do. I know that Fix - it does not work for Windows 8, but the manual register RichEdit might.

  Or try this.

  Of course, you can Google 'DVD Player code 19 error Windows 8' and try the different suggestions. But as I said, Dell has no device driver for any optical drive. They come from Microsoft. It has no pilots last updated to try. And anyone who works with computers must know this.

• Dell laptop 14zxps with windows 7... I get the error code 43 problem when I connect my USB on my laptop

  Hey, I have a laptop of dell 14zxps with windows 7... I get the error code 43 problem when I connect my USB to my laptop... n this laptop is designed in a way where the battery cant b removed... Please help me on how my USB is started again here... Thank you :D

  Try this.

  http://support.Microsoft.com/kb/817900

• burning error code 0 x 80004005 during problem.

  Original title:

  problem burning

  When I used to burn an iso image using windows image burner, it displays the error message "burn failed"(error code 0x80004005)... ". Is the problem in the iso file or in the dvd drive or in the windows... How can I recover this problem...

  Hello

  Step 1:
  Uninstall 3rd party burning software.
   
   
  Step 2:
  Try to run the troubleshooter of DVD burning. Check out the following link to do the same thing.
   

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  I hope this helps.

• HP Pavilion dv6-7020us: driver error Code 28 problems

  Sorry if this is kind of a long start...

  Read that a cause for Code 28 may be due again installed equipment that poses a problem of incompatibility, so...

  First stop, due to problem of hard drive, adequate to get a hard drive again earlier this year. The new current hard drive is "INTERNAL HARD DRIVES DO SAMSUNG Spinpoint M8 ST 1000 L 1 TB 5400 RPM 8 MB Cache SATA (looks like break after" 1000"and"SATA", that's all I can put in).»

  Got Windows 7 x 64 bit installed.

  Ethernet controller, network controller, peripheral PCI, PCI Simple Communications Controller, SM Bus controller, Bus controller series universal (USB) and x 2 unknown device (one of whom I assume is the fingerprint reader) all fail with the error code 28.

  The problem, however...

  With the help of other computers and the family, I managed to get the downloaded files specifically driver installation for Windows 7 x 64 bit, moved to a USB key, ran the files on my computer (with nonworking pilots / that responded to the questionnaire), they seemed of ran perfectly fine and appeared to install correctly, but none of the enumerated factors do not always work.

  Now currently at a loss to know what to do...

  Properties: Details: Hardware ID: value...

  Ethernet controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C & REV_07

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  Network controller

  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00

  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C

  PCI\VEN_1814 & DEV_539A & CC_028000

  PCI\VEN_1814 & DEV_539A & CC_0280

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C & REV_01

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C

  PCI\VEN_10EC & DEV_5229 & CC_FF0000

  PCI\VEN_10EC & DEV_5229 & CC_FFOO

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C & REV_04

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C

  PCI\VEN_8086 & DEV_1E3A & CC_078000

  PCI\VEN_8086 & DEV_1E3A & CC_0780

  SM Bus controller

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C & REV_04

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C

  PCI\VEN_8086 & DEV_1E22 & CC_020500

  PCI\VEN_8086 & DEV_1E22 & CC_0C05

  (USB) Universal Serial Bus controller

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_1818103C & REV_04

  PCI\VEN_8086 & DEV_1E31 & BUBSYS_1818103C

  PCI\VEN_8086 & DEV_1E31 & CC_0C0330

  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  Unknown device

  ACPI\HPQ0004

  * HPQ0004

  Unknown device

  USB\VID_138A & PID_0018 & REV_0078

  USB\VID_138A & PID_0018

  . . . In my view, that it is all information. I'm sorry if I'm actually still lacking some information. Thanks in advance for the help! I look forward to the answer.

  Hello:

  Here are links to the drivers you need in the order you posted devices... just at the height of the sp # with those on your USB.

  Ethernet controller:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56167.exe

  Network controller:

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp57538.exe

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56166.exe

  PCI Simple Communications controller:

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp56158.exe

  Controller of Bus SM: NOTE: first install this driver and restart.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp56156.exe

  Controller of universal serial (USB) Bus:

  This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

  File name: sp56164.exe

  ACPI\HPQ0004:

  This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.

  File name: sp61037.exe

  USB\VID_138A & PID_0018:

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  File name: sp56403.exe

• error code in microft solve this 0 x 80092003

  can someone help me with the please my problem. error code nr is towards the bottom of the list. I uninstalled and reinstalled but its still the same.

  Where you see the original error?

  DETAILS PLEASE!

• DVD CD-ROM on Equium A200 - error Code 37 problem

  Hello

  My laptop does not recognize not the DVD or CD even if the laptop is only 2 months old. When I go to Device Manager came up with an error message: Windows cannot initialize the device of this material (Code 37) driver.

  Anyone know if it is an easy problem to solve?

  Any advice would be much appreciated!

  Perhaps this accelerated procedure could contribute to:

  Remove the drive from the Device Manager CD/DVD and restart the laptop.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Restart again

  Good bye

• Satellite X 200-CD/DVD disappeared - error code 19

  Hi all, new here. After the recent activity of the serious virus on my laptop (X 200) I had to reinstall vista. Therefore, downloading 150000 updates, which took almost a week lol. Somewhere along the line here my drive CD/DVD stopped working. When I checked in the Device Manager the following is what was printed up on top of the Windows form:

  * Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). *
  * Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available

  Of course, no solution found. If anyone has had this problem, if yes what you end up doing to fix it. I tried to update the driver but it says that it is up-to-date. I flashed the BIOS with v2.5 (later of Tosh. I uninstalled the driver in hopes that when I rebooted it would find the material and fix the prob. No luck. If someone has a preview of this it would be greatly appreciated.

  Bill has soon

  Hello

  The problem can be solved easily;

  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Restart the laptop and wait until the CD/DVD drive appears again.

• DVD burn on Satellite A100 problem

  I copied a saving a movie to my PVR to my Satellite A100, converted from .rec in .mpg and edited (cut from the ads at the beginning and end). So far, everything was fine - I could read the film edited on my laptop. The problems started when I tried to burn to DVD.

  The first time I tried this, followed by Windows Movie Maker using Windows DVD Maker, it took about two-and-a-half hours (for a record of 1 hour 45 minutes), and then I found that the end of the film was missing!

  My second attempt (same record) used Ulead DVD MovieFactory for Toshiba. It was much faster, taking about 45 minutes, but after trying to read the DVD, I found that about 50 minutes in the film noise stopped - the soundtrack to this point changed to that of the end credits (but not the image) and then fell silent.

  I tried every software application with different media (first, Philips DVD + R; Second, Verbatim DVD + R) and found exactly the same problems every time.

  Could someone suggest what I'm doing wrong before I waste more time or DVDs on this?

  John

  Hi mate,

  I think that during the compression of something, it s logical that the process takes more time. It s like when you compress zip files, if you set a stronger compression that the process would take more time and archive would be less.

  Yes, Don t worry, I sometimes some errors of thought, too. ;)

  Welcome and good weekend

• DVD burn error, "burn failed".

  I record in windows media center and fire shows them on a dvd.  I've never had a problem until yesterday.

  I am trying to burn the dvd, but get the answer, "burn failed" an error occurred while burning cd/DVD.

  I tried the store several times and he always tells me that the problem is resolved, but it is not.  I also have

  downloaded updates and restarted the computer without success.  Help!

  Hi, Helen,.

  Access Event Viewer Windows and search for messages that coincide with the approximate time that you tried to burn the DVD.  After return of the impossible event ID and message

  During this time, see if the Gokul T solution helps

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-DVD-Maker-burn-failure/535d32d8-86d1-4F99-a4a3-9b61b32f1bd9

  Or, Naman R solution.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/Vista-Media-Center-will-not-burn-DVD-of-any/5a03f051-FAB4-4FB2-a90f-ba5e45d3601d

• Satellite L300-1BW - 19 on CD/DVD drive error code

  Hello people, Satellite L300-1BW my wife lost her DVD player - manager of material properties gives the following error:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I tried to uninstall the DVD driver, then reboot to let her re - install, but it still comes back with the same defect :-(

  Any ideas anyone? ?:|

  Hello!

  Try to delete upper filters and lower, as in this Knowledge Base article Microsoft has offered:
  http://support.Microsoft.com/kb/314060

  (1) run Regedit (start > run > Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good bye

• Error code: C000009A (problems applied update registry during the installation of Windows 7 Service Pack 1)

  After installation of Windows 7 Service Pack 1, the system restarts, and before windows comes up the registry is updated.  I get an error C000009A 128115 of 387921 enforcement update (/ registry)... error that prevents the system to reboot.  Is it possible to get the system to reboot and complete the installation of the service pack.  The only way that I was able to work around this error is to restore from the system restore point before the service pack, but I want to apply the SP1 if possible.  ????

  Windows update and SP1 gave me the same problem and I used this hole day to RESOLVE.

  Windows 7 is not bootable. Safe mode Windows 7 was not bootable, - stop at classpnp.sys.  I used the line of command of the rescue disk and Linux (!) to fix it.  And then little important reading / advice on this forum.

  Error message at startup:

  C000009A application update 262832 (registry\ma 109544 operation error   (no more room on screen)

  After a few reboots failed, I tried a restore of windows rescue disk, but windows update has somehow erased all my restore point! (Argh)

  Then I looked in the log file c:\windows\winsxs\poqexec.log and found a reference to the error: (obs this folder has some 70,000 + files)

  1cbd36fd5eb05f3: 74, c000009a, 1abe7, 0, SetKeyValue; \Registry\Machine\Software\Microsoft\Windows\CurrentVersion\SideBySide\Winners\amd64_microsoft-windows-e atibility.resources_31bf3856ad364e35_pt - pt_0b9032dad0ee6ed8\6.1, 6.1.7600.16385, AQ =.

  Then I tried to add this key in the registry using regedit command line after booting from the rescue floppy.  But repeated boots showed this register does not have / save my extra key. (Strange-I should be able to change the shape of the hot spare register, or?)

  Next step was to start a live CD of Linux (Mandriva) to browse the windows system drive.

  This way, I found the c:\windows\winsxs\pending.xml (99 MB) file and may open in kwrite (Linux).  I'm looking for "atibility.resources_31bf3856ad364e35_pt - pt. Found only in the 114.808 (of more than 300,000 lines) line.  Add a! After< to="" make="" this="" xml="" line="" a="" comment.=""  saved="" the="" file.="" rebooted="" and="" ..="" yes="" ..,="" windows="" 7="" updated="" some="" files,="" rebooted="" 2="" times="" and="" then="" started="" as="">

  I guess MS has created a lot of angry people today!

  Amd64_microsoft-windows-e... atibility.resources_... file is probably related to

  (a) ATI/AMD graphics (as in my system) cards

  (b) Windows MUI (Multilingual User Interface) system in windows 7 ultimate.

  PT - pt is a code for a language.  (Not mine, I'm from Norway, no.)

  on Windows 7 ultimate (new)

• Error code 998 problem with Corel Draw - error Code 998 for start Corel DrawX5

  System: windows 7 64 bit

  Product problem: Corel Draw X 5 including Corel Photo pain and Corel Draw
  Launch of the AU: code error 998
  "Could not load corelpp.dll" or "cannot load CorelDrw.dll.
  However, the .dll are existing.
  Uninstallation and reinstallation complete nothing changed the software.
  Thank you for your help.
  System: windows 7 64 bit
  My problem is with Corel Draw X 5
  When I run the application Corel Photo paint or Corel Draw, the error message is:
  "Could not load corelpp.dll" or "cannot load CorelDrw.dll.
  But the .dll file really leaves in my C:
  Thank you for your help

  Probably better if you ask Corel. Because this is not the Microsoft program

• PE 3 - DVD burning error - data rate too high

  I imported a slideshow of Photoshop Elements 5.  I made minor adjustments and added music.  Now I am trying burn to a DVD.  3 EP passes through the encryption stage and when it gets to the burning stage I get the following error message:

  "The flow of data in this file is too high for the DVD.  Youy should replace the file with one of a lower rate. »

  I get this message when I try to burn on a DVD or a floder.

  Any suggestion greatly apprciated.  Try burning a DVD for this weekend.

  Dave

  Dave,

  As a little "trick," pick up some discs DVD RW to test - no more "coasters". Do NOT use these drives delivery, but only for use/reuse as tests.

  I use the pre big brother, PrPro and more (creation) and yet always did a great job in auto mode, but some sequences could well bring pre evil in this regard.

  Please report your success.

  Good luck

  Hunt

• Http, https, ftp with error code 12007 problems.

  The problem started after a virus attached.  I use wifi on a series of mini laptop 1011 dell with Windows XP. I worked this problem via the internet with little or no help.  I used Malwarebytes to clean up.  I can't uninstall microsoft essentials.  It does not work and my firewall is disabled.  I can't install new software for safety due to being offline with the net.  Needs help!

  The problem started after a virus attached.  I use wifi on a series of mini laptop 1011 dell with Windows XP. I worked this problem via the internet with little or no help.  I used Malwarebytes to clean up.  I can't uninstall microsoft essentials.  It does not work and my firewall is disabled.  I can't install new software for safety due to being offline with the net.  Needs help!

  Restore the system to factory settings.

  Even though I know you love clean and keep all your installed applications to configure how they are and without having to restore your documents/photos/music/emails/contacts/bookmarks and others of your last backup - but the truth is that if you're having this much of the problems already - virus/malware that attacks you and infested/infected you probably had friends and probably did permanent damage.

  You can try to do a cleanse to get to a point where you can save some extra stuff.  Some of them you may need to use another computer to download stuff on and then transfer it on this machine.  At the end of the day - is the only way to be sure you're 100% 'good to go' has restoring factory.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.