dvd CD player will not read

Similar Questions

• My dvd player will not read my disk of Windows 8 Pro upgrade

  Computer laptop Dell Vostro 1500 with XP Professional, my TSSTcorp L632H DVD player will not read my Windows 8 upgrade disk.

  It will read other DVDs. I've updated the firmware.

  The properties of the drive is display type as unknown file system CD player with blue disk image but used space and free space as 0.

  By using Device Manager, when I ask him to fill the volume is the disk CD 0, Type DVD, free media, not applicable Partition Style, capacity, space Unallocate status and placeholder show all 0.

  I also tried to use a separate USB TSSTcorp DVD drive and it will not also read the Windows8 disc.

  My desktop (Windows, 8, 1) DVD drive Asus computer reads the disc of Windows 8, but I can't use it to load Windows 8 on my laptop - or what I can?

  Can I connect my laptop to my desktop to upgrade laptop computer at Windows8 use of the desktop DVD player?

  I managed to copy the disc of Windows 8 on an external hard drive using another laptop that can play the DVD.

  Then I attached the external hard drive to my laptop and run Setup from there and installed Windows 8 to my old laptop to Windows XP...

  Thanks for your suggestion.

• CD player will not read CDs or DVDs

  error message reads: DLA does not support write - once media.  I've tried CDRW as well, player will not read or burn CDs or DVDs of any kind, the "fix - it" tool report indicates: "media in the CD/DVD drive is not readable." and "not fixed".  Ive tried several brands of CD and CD - RW.  Any suggestions on how to fix this?

  error message reads: DLA does not support write - once media.  I've tried CDRW as well, player will not read or burn CDs or DVDs of any kind, the "fix - it" tool report indicates: "media in the CD/DVD drive is not readable." and "not fixed".  Ive tried several brands of CD and CD - RW.  Any suggestions on how to fix this?

  ========================================
  The following article might be worth a visit, but it sounds
  as you may have a hardware problem with your optical drive.

  (314060) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - to proceed at your own risk

• DVD player will not read the discs more after burn fail

  Something strange happen to my DVD player. I tried to burn a blank DVD but it failed without any error message: the DVD has not been recognized. Since then the DVD player will not only read one of my other burned DVD that I need for my daily work. Can anyone help?

  DVD players are not particularly robust, especially designed patterns for portability. It may have burned his laser for DVD work.

• Why my player will not read CD or DVD?

  Why will not read my cd rom CD or DVD? whenever I insert a cd or dvd it will not read and I click on computer, double-click dvd player it comes out saying please insert the cd. Thanks in advance for your

  Why will not read my cd rom CD or DVD? whenever I insert a cd or dvd it will not read and I click on computer, double-click dvd player it comes out saying please insert the cd. Thanks in advance for your

  ====================================
  The following article might be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  It is also possible that the CD / DVD drive requires
  repaired or replaced.

• Combo CDR/DVD SDR2102 drive will not read CDs or DVDs

  Hello

  I have a mobile Ergo Elite 4.
  The hard drive crashed and I bought a new one.
  I have loaded windows XP by using a boot disk but cannot get the Toshiba SDR2102 CDR/DVD combo drive to work. I had to load windows on via USB
  using a USB port.

  I can see the drive in windows Explorer, but it will not read the CD or DVD.
  I looked in the Device Manager, and it came with no warning mark.
  I tried deleteting, re-startup and he's back in the Device Manager.

  I'm trying to find a better driver, but it says that I use the best driver.
  I tried various Web sites using sand everywhere tells me that I do not need a driver for this drive.
  What I do, it seems as if the Combo driver is recognized but it will not be read whatever it is inserted, he said only: insert the disc.

  Does anyone know what I can try? or know where I can get drivers for it or software to test the drive?

  any help would be appreciated. :-(
  Some.

  Hello

  You n t need a special driver for the CD/DVD drive.
  CD/DVD players use the current Microsoft drivers already contained in the Windows operating system.

  In my opinion, you should first test different types of media. Please note that not all CD or DVD s are compatible. Distribute readers can't handle bad quality mediums.

  But we shouldn't t rule out a risk of hardware malfunction.
  Disk failure and you may wish to contact your dealer for a replacement.

• How do burn you a DVD, Media Player does not read a blank disc

  How to burn a DVD in Windows Media Player or Windows XP Professional with a burning software free when my DVD / CD drive does not read a blank DVD

  Hi mikebrownbridge,

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  ·         He has already worked?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Burn a CD or DVD in Windows Media Player (Applicable to Windows XP)

• CD player will not read vist CD when I try to upgrade XP

  Trying to upgrade from XP to vista CD player is not reading disc but reads the other disks

  Vista is on a DVD, not a CD.

  Your drive must be able to read the DVD.

  See you soon.

  Mick Murphy - Microsoft partner

• DVD player will not read is no longer drives

  Recently, I went for 2 weeks - when I left my computer was working and my dvd drive could read all my disks (mainly games)

  My return however (and after the installation of 18 updates last night) the bed DVD player is no longer just about any type of media disc (having already be able to read all). However, whenever I needed it for work, he did, I noticed that before I left my DVD player had played a bit and seems to be trying to read discs (making the noise of rotation).

  Anyone got any ideas on what this could be and a possible fix?

  (im running windows vista and the drive is a tsstcorp DVD + - RW TS - H653B ATA)

  Thanks in advance

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Media Player will not read DVDs

  I have a series of educational dvd that worked very well, that now, they will not be able to open. You run the fix it program, says files are not readable. Help!

  With vista premium

  I just put a DVD in an old sony dvd player and it plays, so I can continue to use that, but it freaks wanting me that microsoft can play, then mysteriously can not play, I could charge them for the time they lose mine.

  ==============================================
  Wow... I didn't know you had 27 DVD and all of them fail to play.

  I wonder if this article would be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  And it could be a problem with the automatic playback:

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Equium A100-027: CD/DVD player will not read the CD data/music

  He'll read/play commercial DVDs, but music no commercial and data CD...

  I tried a new cd of norton, but do not read this and have tried other commercial programs but no luck... just click

  the same thing with music, tried I don't know how many discs, same result... help me please!

  Have you ever tried this method?

  Go to Device Manager and remove the drive from the list of devices CD/DVD.

  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart your laptop, and after that windows installs it again. Perhaps this may solve your problem.

• DVD and CDROM will not read the disc

  I recently reinstalled Vista on my PC. In the process, I put a lot of files on a DVD rom for backup. My PC is now updated and everything works fine. However, I put he disc in the drive, it will attempt to read, but no files appear on the disc. However, when I click on "computer", then "E: / (DVD rom player)" it shows who have 4 + GB of information stored on disk. How can I get these files to appear and become available?

  Hi dharmapaws,

  This can sometimes happen if an audio device is disabled or if windows media player is already running in the background when the disc is inserted, then you can check this.

  You can also check if you are able to recover the files on another computer. If so, see if you can extract them and burn a new copy.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CD player will not read cd

  I get - 'Please insert disc' when disc is in!  Also, I just did a reinstall of windows xp

  Get a CD/DVD drive, disk cleanup and wipe the drive and see if that helps. If it isn't then the player does not and must be replaced.

• Samsung cdrw/dvd sm-316 will not read disks

  help with samsung cdrw/dvd sm-316 b, who can not read any type of disc

  Contact technical support Samsuns, read their knowledge base or ask in their forums. And when you do, be more precise that «help with...» »

  This means absolutely nothing.

• My boom box CD player will not read any disk, what can I do?

  My boom box CD player won't read any disks.

  I'm sorry to know that you have a problem with your portable player.

  Can I have the number of full model of your device? You can see on the first page of the manual or the front or rear of the unit (e.g., CFD-G700CP).