DVD error message

Similar Questions

• The dvd error message Vhs conversion

  I have a program to convert your own Vhs into dvd movies when I use it I get an error message something about the ip address of my computer, I called microsoft and my local far servise that no chance, the name of the program is that Plextor ConvertX everything else works on the program but when I go to capture video the error message appears. can someone please?

  Looks like a problem with the application, since, as you say, "everything works".  I would contact them first.

  Also - you can give the error verbatim instead of "something like".  Chances are that a search on the Internet for the exact message fly with answers.

• I can't watch DVD: error message - create failed overlay

  When I put a dvd in I click here to read on DVD Win. A message just create up to failed overlay. Low resolution of the screen or color depth. I tried both of them, but it makes no difference. Any ideas?

  Hello

  What OS was installed on the laptop you. Are you using the W2k?
  To my knowledge that some thing like, which could occur if an external monitor is connected and extended desktop is enabled in the display properties.

  I found also some useful tips on different websites:
  Please check the following steps:

  1. make sure that the laptop hardware acceleration is set to full.
  Software DVD players require this setting; otherwise, they can take advantage of features of superposition of the video card.
  Here's how:
  -Right click anywhere on the desktop and select Properties.
  -Select the settings tab, and then click the Advanced button.
  -Select the performance tab.
  -Make sure that the hardware acceleration is set to full.

  2. make sure that DirectDraw acceleration is turned on in the DirectX utility
  -To start the DirectX, you must type the DXDIAG command in the window RUN.
  -then select the view tab.
  -in the Middle, on the left side, you will see a frame for DirectDraw acceleration. It must be enabled

  Then restart the laptop and check if it of possible to watch DVD

• Qosmio G30-220: HD-DVD via HDMI - error message Impossible to export the signal

  Hello

  When I play a HD-DVD on my G30-220 LCD_panel, it works like a charm (with the Toshiba HD - DVD player software).

  When I switch to dualview to export the signal through HDMI to my LCD TV (HDCP), I get an error message:

  ' Cannot implement the signal. Please switch to the internal display "(this is not the exact English message. I get the error message in Dutch and I've translated).

  Hello

  As much as I know the dual display is not possible. Either watch you on LCD display or on the TV. The two of them at the same time will not work. Reason because it's the protection against copying, and also because of very high data transfer.

  I tested it with Qosmio friends on my LCD HD-ready TV.

• Error message when you use the DVD player

  I have a Satellite P200D and whenever I put a disc any in the drive I get an error NON-DISQUE when I eject the disc. I always make sure I close all programs relating to the use of the disc before you try to take out the drive. It is a new problem that I used the laptop for a few months with no problems at all. The text of the error message is below. Pointers would be appreciated. I can live with that, but it would be nice not to have to.

  Exception Processing Message 0xc0000013 0x764C023C 0x8E4A1B6C 0x764C023C 0x764C023C settings

  OK, if you try to exit the disc using the eject button on the side of the laptop, why not try ejection through windows software.

  To do this right-click on the dvd drive in my computer, then click "eject". This could mean windows that its ok to let the player go now.

  Another solution would be to save all the important data to another drive, and then put the laptop "out of area State" by using the recovery disk. I would say that the problem will disappear.

  However, if problems persist, please consult your place of purchase for a check up.

  Good luck.

• Error message using on Satellite A135 recovery CD/DVDs

  Hi Forum:

  I try to restore the factory default in my laptop Satellite A135 where to finish the process I have received an Error Message and press ok and disable my laptop automaticlly.

  NOTE: Only use the CD/DVD, my laptop does not have the partition hiding any help?

  Hello

  I googled a bit for this error message and it seems that the error would have apparently due to HARD drive failure.
  So in your case, it would be desirable to replace the HARD drive and to verify if the error persists using a new HARD drive.

  Best regards

• Satellite L300-H02: DVD/CD player don't work no-error message 39

  Hi all

  I just bought a Toshiba laptop, Vista Premium Edition family and after a massive Windows Update to download, DVD-CD player didn't work. Error message 39, driver damaged or missing. The driver isn't missing, so it must be corrupted. Am savvy with regedit on the dismantling of upper and lower filters in the registry, except haven action t deleting again, because he doesn t seem to be a upper filter listed. Only the lower filter.

  The information also indicates that you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall the affected programs. which is a problem, because Vista etc. has already been loaded and any other software provided with the laptop.

  I have a little chicken to go ahead and remove the lower filter registry entry, not because there are no upper entry to remove, I have heard some people cannot write to CD after removing the filters in the registry of m.

  Where can I get information about the CD-rom drive for this model: pslboa - 08 h 022?

  It is not any information about it in system information.

  Thanks in advance people, Anniebird

  Hello

  Did you follow instructions of this http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm document?

  Solutions for Windows XP Home and Vista edition may be the same, but I think there must be some different details.

• Satellite L10 DVD Super Multi Drive - E/s of entry Error Message

  Does anyone know why, when I try to play a CD or CD-ROM, I get a box saying i/o error of entry?
  I have a Satellite L10 with a DVD super multi drive. It can read DVDs and DVD ROM

  I thought maybe it was a cable connected the drive itself, but if it's that I need how out of the car and how to support.

  I tried updating the driver and uninstall it then reinstall the drive, but I still have the same problem.
  Cannot use the accompanying software as is all the cd.

  Please can someone help me.
  Thank you

  Hello

  In most cases the entrance of e/s, error message is related to a hardware malfunction (CD/DVD drive).
  The readers of the lens laser can not calibrate properly and therefore it can not read the CD inserted.
  These errors are not uncommon and occur mostly after a long period of use due to a material stressed.

  But let's check the last possibility of solution;
  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then, restart the computer and check if it of possible to read CDs.

• Carpet * a DVD-Ram UJ - 841S comes with several error messages

  My laptop is relatively new, I've been burning some video files in DVD - RW and all of a sudden my DVD drive has stopped working. It came with several error messages format "failed due to damage media", "format failed due to general failure" and "the inserted disc is READ only".

  I also can't rip music discs.

  Can you see ODD listed in Device Manager, and if so what is the exact status it?

  Sorry, but we discus on ODD, but nobody knows what model of laptop you have and what is the history of this problem. Is replaced the drive? Why are you sure that you are using compatible with your laptop ODD.

  Please more information!

• DVD player don't play - error message «create Overlay» impossible

  Can someone please help. On my satellite player does not playback of the DVD using is InterVideo WinDVD. Error message 'create Overlay failed... ". Please lower your screen resolution or the depth of the screen. "Any help appreciated. Thank you Owen

  Hello

  Try it please follow the instructions in this document. I hope this will help you.

  Good bye

• Error message "Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer"

  Original title: Windows Media Player

  All of a sudden, I get the following error message when I try to use Windows Media Player 11: "Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer."  Never had this problem, or a message in the past.

  Hi RRobb,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: If you have a DVD decoder (for example Power DVD) try reinstalling it.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  If this is not the case, see the following link:

  Plug-ins for Windows Media Player

  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  Method 2: Perform a system restore if the problem occurred recently.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• Get error message: C00D11B0 during playback of DVD video.

  Original title:-Error Message: C00D11B0

  played successfully Adam & Eve DVD videos.  Now the above error message keeps coming up.  Why can I not play these videos now?

  Hello

  1. did you of recent changes to the system before the show?

  2. are you watching videos online?

  3. How do you play the videos?

  4. are you watch videos online or play using Windows Media player?

  5. If you look online, what web browser do you use?

  Please provide more information on the issue to help you further.

  Also, I suggest you perform a clean boot and check if it helps.

  Perform a clean boot.

  To perform a clean boot and see if the problem still occurs, follow the steps in the below link.

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  Let us know if it helps.

• The following error message appears: error ID = 0xC00D1163, trying to watch DVDs.

  Hi all hope someone can help.

  I have read the DVD I own on my Dell computer, never connected to the internet, no problem for 6 years.  Then suddenly the following error message appears: error ID = 0xC00D1163, Condition ID = 0x00000000, saying: I need copyright permission to play DVDs I have burned or downloaded which, of course, I never did.  How can I rid my computer of this obvious scam to take advantage again of my DVDs?  Thank you in advance.

  Steve

  Make a read here: -.

  http://msmvps.com/blogs/chrisl/articles/11496.aspx

• CD/dvd burner writes correctly, but displays the error message ' medium not present-tray closed. - 0X023A01'.

  Hello

  I have a unique problem where my cd/dvd burner burn my data to a recordable cd (not verified with recordable dvd yet) correctly, but after the burning process I get an error message "(devMediumNotPresent_TrayClosed) closing session error (Session: 4 medium not present-tray closed. - 0X023A01'.)"

  I tried roxio and nero, cdburnerxp, but I get this error on the whole. However, the burn is successful. I can open the data burned in my laptop or other computers and use the same drive to burn more data in the other computer. I tired to reduce speed, but it is of no use. I have also reinstalled the drivers but no use at the end I also did a clean uninstall of Roxio-> then installed Nero-> Nero clean uninstall-> then install Cdburnerxp 4.3.2.2140.

  Use the same media brand in my desktop LG cd/dvd combo drive, and things are absolutely perfect.

  Fix Microsoft, it gives the following report: -.

  -------------------------------------------------------

  Problems found status

  Drive is not capable of burning (TSSTcorp DVD +-RW TS - L632H) detected other Solutions
  -----------------------
  Issues checked the status

  Device is not working properly (TSSTcorp DVD +-RW TS - L632H) checked other Solutions

  Filter of device drivers are corrupt (TSSTcorp DVD +-RW TS - L632H) checked other Solutions

  Class filter drivers are corrupt checked other Solutions

  Drive is not assigned one drive letter other verified Solutions

  Drive is disabled (TSSTcorp DVD +-RW TS - L632H) checked other Solutions

  ------------------------------------

  Other details: -.

  Dell Inspiron 1520 laptop | XP Pro | TSSTcorp DVD +-RW TS-L632H | CDBurnerXP 4.3.2.2140

  Please let me know if all of the other details are required. Waiting for a response

  Concerning

  TKS

  Hello

  I got my ODD back to normal. The simple solution was to clean the lens of the drive. I called a Dell technician. He inspected the car and found that the problem was due to an unclean lens. In fact, I have never cleaned the lens since I bought the laptop in February 2008. I used a lens cleaner with 6 brushes Writex.

  I also checked the drive by
  1. create a Live CD: Ubuntu
  2. a burned DVD
  3 burn a different brand CD

  Above all 3 tasks are normally carried out with any error. The player read / written correctly.

  Good bye.

• Try to burn DVDs - software decoding error message

  When you try to burn a DVD from Director of windows, he arrives at 2.4% of the coding and then stops and gives the following error message:

  "One or more files that have been added in DVD maker may not be decoded properly.  Make sure you have decoding software installed on your computer that can decode the different files and then try again. »

  Before these last months, we had no problem burning DVD.  Now, whenever we try, it's the error message that occurs.  I am really a novice when it comes to corrections of the computer, so I'm hoping to get appropriate assistance.  Thank you very much!

  Two possibilities come to mind, is an essential Codec you are missing or if you have a defective Codec installed.

  Look for defective Codecs in MOVIE Maker via the Tools / Options / Compatibility tab.  Remove all entries except the AVI compressor.  See if you get more than 2.4 percent.

  Rule out the possibility of miss some relevant Codecs, discover and download and install something like that and test again.

  Basically, the K-Lite Mega Codec Pack is going to play all video files on this planet.

  K - Lite Mega Codec Pack
  K - Lite Codec Pack Full (less features)"

  K - Lite Mega Codec Pack 5.6.1
  http://www.free-codecs.com/download/K_Lite_Mega_Codec_Pack.htm

  There would also be other causes, then you can try some of these.

  Give Movie Maker a clear race by temporarily disabling all startup programs and Services of third party (non-Microsoft).

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Try System Restore and System File Checker program.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  DVD encode - comes in at 98.9% burned, then fails
  http://www.windowsdvdmaker.com/forums/thread/136.aspx

  Vista - creating Windows DVD fails at 99%
  http://www.Vistax64.com/Vista-music-pictures-video/198083-Windows-DVD-Maker-fails-99-a.html

  Do you have enough space on the DVD for the file, and you have the same amount of free space on the hard disk for the temporary work files (maybe even a little more)?

  This is a FAQ on the Codecs it's Vista related and interesting to read.

  Windows Vista codecs
  http://www.Windows-Vista-update.com/Windows_Vista_codecs.html