DVD I burned and want to save on my computer
Download my dvd on my computer
Download my dvd on my computer
==================================
Here is a method...
If you burned the DVD there is no protection against copying so
just copy and paste each VIDEO_TS file in a folder that
the name of the film.
Then you can play VIDEO_TS folders with the free
VLC Media Player. Just right click a VIDEO_TS folder
and choose... "Play with VLC Media player"
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)
VLC Media Player
http://www.videolan.org/
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
Tags: Windows
Similar Questions
-
I have a movie of 2h30min that I need in .avi, because it will be burned to a dvd. My computer crashes if I try to burn directly to a dvd, but I saved as .wmv on my computer already. THX,
InvAG
Hi Invag,
I suggest you to post the same question in Windows live mail, since we have a dedicated support for the same.
Portal of Windows Live e-mail: http://answers.microsoft.com/en-us/windowslive/forum
-
After I open a document using Adobe reader DC and want to save it with the help of Save as when I try to open this operation all I get is an empty windo saying save as. This problem just started, note I'm on Windows 7 Prof
Hi sgodwin2468,
Make sure that Acrobat Reader DC is updated Release Notes | Adobe Acrobat, Reader.
If the problem persists, try the solution below.
The default "save under" Acrobat/Reader DC dialog box is different from the dialogue box you had in earlier versions of Acrobat/Reader, it also allows you to record in the clouds and previous locations that you saved the files. It is possible that when Acrobat/Reader tries to connect to the 'cloud', it runs into problems. You can try to disable this feature to see if this brings your backup in the back of the box: open Acrobat Preferences, then go to the "General" category and uncheck "show the online storage when you save files:
Kind regards
Nicos
-
DVD drive burning - I want to burn music from the Internet on a DVD disc
I want to burn music on the internet with a DVD disc. I don't know how to do it at all. Please tell me what to do step by step. Thank you!
HelloComing to burn these movies on DVD, you can use Windows DVD Maker, Windows Media Center, Windows Media Player or Windows Explorer.Find help below articles.Burn a CD or DVD in Windows Media Center
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-CenterBurn a CD or DVD in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-PlayerImportant note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. -
The question comes down to my needs. Where are stored the "last Sessions"? I backed up my drive "C", My Documents, my pictures, etc., so I should be OK with bookmarks. But, I would also like to be able to access previous sessions.
The current session is stored in sessionstore.js file in the Firefox profile folder.
There are also backups in the folder sessionstore-backups that you can copy the sessionstore.js file make Firefox to use this file.You can use this button to go to the Firefox profile folder currently in use:
- Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
- http://KB.mozillazine.org/Profile_folder_-_Firefox
-
This call is legitimate?
It's a scam.
-
I use P 7 ultimate and want to move to another computer.
The method of phone ' slui.exe 4 ' does not work with W 7 Ultimate. It does not work with W 7 Pro.
You can also try direct phone activation
Direct activation number: (888) 725-1047
1-800-936-5700
-
Add DVD LightScribe burner to my desire to 700-060ea
I opened my machine and had a look to add a DVD LightScribe burner and although I see a lot of traffic to provide the power, I don't see any data (sata) connectors to connect on the second disc.
There are four sata ports on the motherboard of karim to your desktop PC.
You will need to buy a SATA cable to connect your new DVD LightScribe burner and an unused port. You can buy them at any electronics store, including your local Wal-Mart.
-
It happened once before, but I don't remember the solution.
A few days ago started IE9 conventional if I want to save a file when I click on a video link. I want to happen is for Windows Media Player to view the video. I don't want to save on my computer, and if I did, I know how to right click and choose Save target as...
It is very frustarting as Windows hides these obvious options without giving you a way easty to change. I don't know what has caused the change at first.
WMP is set as default player for all supported media types.
Solution: Although WMP is already set as default program for all its supported video format, I had to go to set your default programs and select explicitly.
Looks like the info bar itself would have the option available.
Hello
Thank you for your solution.This will help other members of the community to the same question.Please do not hesitate to visit our Web site for any help related to the Windows operating system. -
burned music CD only works in the computer not in dvd player
CD burner problem
I have music from different CDs in my media library and made a cd I burned and it works that on my computer and my dvd player, it does not work for my friend, I did it to help me please Gwen123
The following items may be worth a visit:
Windows Vista - burn a CD or DVD in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
(Expand the section: "Burn audio CD")Windows Vista - burn a CD or DVD in Windows Media Player:
Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questionsWindows Vista - burn a CD or DVD in Windows Media Center
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center
(expand the section - to burn an audio CD to play on your CD player) -
I need help! My CD/DVD drive has disappeared, it is not even in the BIOS, and all the other removable disks since I installed an update from Microsoft. I went through all the troubleshooting steps and nothing has worked, including the fix it. How can I fix it? I contacted Microsoft and back an email that I had to PAY for technical support to resolve this issue. Which seems hardly fair since there was an update on their part that messed up my laptop. I have a Gateway MX8738 with Vista Home Premium. I have not seen the error messages it just that there is no CD/DVD drive installed and when I check in my computer the only things that are displayed are the drives C and D.
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then check the cables
both ends. Remove and replace, do not just tight. For laptops, you can often clean the
power and data of the contacts with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the system manufacturer
and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case
(Read burn CD & DVD and CD and DVD). It's not unusual for 1 or 2 parts to not
function, while others do so correctly.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates
and the correct registry entries for your car.Here are the keys to what I believe are the ones in question - for the CD/DVD drive subkeys
course because there will be other subkeys in these keys. Do not forget to ask involved specific keys
as well as the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even right for registry settings
your CD/DVD from someone with the same drive model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Unable to save scans to computer in microsoft word on printer HP Photosmart5510 B111a format.
I can't save scans on my computer in microsoft word format on printer HP Photosmart5510 B111a. Only the printer format is PDF. I do not get a choice to add pages to PDF or another so each scan a page saves in PDF format. I tried to convert the PDF scans into word documents to microsoft without success because of the encryption. Is there a software ' add on ' I can solve this problem? I want to save scans to computer in microsoft word format not. PDF Or is there a code I can use in the printer to change the PDF format? Help, please.
Hello
You need an ORC software to do this. But you can use Microsoft Word (2007 or 2010) himself to work for you. Please, use the following method:
http://Office.Microsoft.com/en-us/Word-Help/scan-and-edit-a-document-HA010254879.aspx
Good luck.
-
After finishing a movie that I save it. When I want to burn a DVD and I click the icon burn he wants re-register me which takes a few hours. How can I burn a DVD after that I have recorded previously.
After finishing a movie that I save it. When I want to burn a DVD and I click the icon burn he wants re-register me which takes a few hours. How can I burn a DVD after that I have recorded previously.
==========================================================
Have you created the movie in Windows Live Movie Maker and WIndows DVD Maker?Maker_try of If_Movie to save the project in the. WMV format to a folder on your hard drive
drive, then import them saved. File WMV in Windows DVD Maker.How to save the project in Windows Live Movie Maker to WMV Format
http://www.YouTube.com/watch?v=ZyqZm5MBc7oDepending on the length of the video... DVD Maker can take a long time to
encodes the video and burn the DVD.Windows 7 - burn a video DVD with Windows DVD Maker disc
http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
(Windows 7 Home Premium / Professional / Ultimate / Enterprise) -
I have a movie... great... now I want to save as a .wmv file, so I can burn it to a CD, but I keep getting an error 0 x 87160139 "find missing or remove the unusable items in your project and then try again." so I tried to change the format of mp4 to mi/gal (what I know now was not necessary), but it will not save yet. I would like to make photos and videos I use. I think that this video might be too big? not sure... also, all files have the same name and in the same folder that I shot, I'm in a block, any help appreciated! Thank you.
-Mark
Hi Mark,
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that you are getting an error code.
I suggest you to refer to the Microsoft Help Article below and check if that helps.
You can also check:
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
I have a project in iMovie HD6 and want export to Final Cut Pro. I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut? I just want to make a new trailer for the project.
What you suggest is possible but it takes software and third-party quality loss.
Instead, export a QuickTIme movie. If you have a choice of codecs, choose Apple Intermediate Codec. You can save it where you want it-maybe in the movies.
Then import the movie into FCP as a clip.
Good luck.
Russ
Maybe you are looking for
-
10.7.5 system running slow and background noise is high
Recently, I had slow moments where the application response time is delayed seriously or fail at all. AND a sound driving noise happens the laptop. Examples: When I run a Quit in an application (text, Mail, Safari, Chrome, Opera-more recently) no res
-
DVD/cd player not working not not windows 8.1
I have a HP Pavilion 15 laptop new with cyberlink suite mdeia 10 installed. My computer don't recognize not or read any cd or dvd set. I opened device manager went to properties by car and there is a yellow triangle on the icon of the disk with the
-
I want to install this printer and managed to communicate with her since my main PC via USB, LAN and Wireless LAN. I noticed however was able to get the feature Airprint works. I also have intalled the Pixima/Maxify app on my iPhone and it says it c
-
How to remove a program uninstalled my program list
I need help to remove a program that I installed and then uninstalled. He remains in my program list and I want to be able to remove it. It is intended to be discreet and since I share my pc with my spouse, I'm not her to see this program remaining
-
Maybe you can help me, people. My 4 - month, dv6-7014nr, under Win7 Home Premium on a drive hybrid 750Go, has a bad habit: if I leave it unattended for a period of time, the screen turns off (most likely the screen saver, I get it). If I shake the mo