DVD player - "Application not found".

Similar Questions

• CD player - Application not found

  Hi I can open and close the drive, but when I try to run the disc (it used to auto-play) it comes up with a message E: / Application not found
  in the properties of the disk drive, it shows as full disk - even when I take the cd or dvd out and close the drawer.
  I did the fix it myself - and got to this 3rd option below:
  However, in the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon registry subkey, I have no Winlogon
  I checked the material inside to make sure that the plugs are in place for the cd player and they are as far as I can tell.
  I have seen a lot of blog on this subject - and still no further forward - can anyone help?
  Method 3: make sure the CD-ROM is available only to the locally connected users Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  CD-ROM to restrict access to only user connected locally can be turned off. To activate this option, follow these steps:

  1. Click Startand then click run.
  2. In the Open box, type regedit, and then click OK.
  3. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
  4. In the navigation pane, under data, if the value for allocatecdroms is 0, go to step 5.
  5. In the navigation pane, under data, if the value for allocatecdroms is 1, right-click allocatecdroms, and then click change.
  6. In the value data box, type 0, and then click OK.
  7. Exit Registry Editor.
  8. A test to determine if the problem is resolved.

  If this method resolves the problem, you are finished.

  Hello rayban,.

  Thank you for using the Microsoft answers Forum.

  Are follow you these instructions from a site from Microsoft or a third party site for tech support questions? If you got this information from Microsoft, please provide the number of the KB article and the specific error if it is different from what you have posted above. Did you somehow update drivers or software for the device to maintain properly?

  Please reply to the above questions and then republish here so that we can help you further.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP dv2500 - CD/DVD drive "Application not found".

  I have a Pavilion dv2500 with the optical drive does not properly.  It is detected by the system, but does not recognize/autolaunch whatever it is inserted in the drive.  When I try to open the drive in my computer, it says "" F: / Application not found! "."

  I tried the the registry fix that is always posted here in response to the problems of CD/DVD drive.

  I tried to reinstall via Device Manager ("this device is working properly").

  I have removed/reinstalled all programs using the player (iTunes, Nero, etc..)

  It's extremely frustrating, any additional help/suggestions would be appreciated.

  I am pleased to announce that I was able to do work - physically remove the disk, I noticed that the support of screws holding that place was folded outwards, probably preventing all contacts a link to the motherboard.

  I hope that the system restore will speed up things a bit as well.

  Thanks again for your help, Bookworm.

• D drive not working do not. Bed "Application not found".

  I had to get a new hard drive a few months ago and this is the first time using my D drive since.  When a disc is inserted, it looks like he's trying to read the disc, but then nothing happens.  When I try to open it manually, it says "Application not found".  I recently got a new printer and try to install the equipment for this and am unable.  I tried to change the drive letter, Microsoft troubleshooting Services automated: your CD or DVD cannot read or write media.  No change and still does not.  I need help please!

  You can get in trouble with your device drivers.  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you need to do for the reader of CD and the printer - drivers, firmware and software - and all the others that you have time to do-, they help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  Make sure the devices are attached and in the course of running when you install the drivers and firmware and software - is available but certainly the drivers.  After the drivers, you can install the firmware and software.

  How did you install Vista on your new drive hard if you do not use the CD player?  So it must have worked at a given time.  I think that it will solve the problem to update the drivers on it (they probably got changed for bad ones during the re-Setup).

  As far as the printer will, once you've done the above, use the Add Printer Wizard and it should take you thrugh the process without problem.  If you have any problems, post the EXACT error messages and where the process failed it.  Then, we will try to remedy this situation separately, but for nowlet concentrates for the functional CD.

  I have hopethis help.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite A500 - video/dvd player is not compatible with Windows 10

  After having recently updated of my laptop for windows 10 I discovered that the dvd player does not work. A message is displayed informing that the player is not compatible with this version of windows. A scan using Norton suggests dvd will not work because it needs to be configured.

  Does anyone else have this problem?

  Obviously, Toshiba DVD playback application that is preinstalled on this Satellite A500 model is not compatible with the system Windows 10.

  In this case this software will not properly work after the upgrade to win 10 and I guess you have to remove the system Win 10.

  Unfortunately, the Satellite A500 is not listed as Win 10 portable computers and so I don't think you will get an update to this software for DVD playback.

  Here is a list of models supported for upgrading to Windows 10
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Mat * one years (uj-840) DVD player does not work properly

  The Mat * one years (uj-840) DVD player does not work properly.
  A symptom of the problem is that the icon does not appear in 'my computer '.
  more and she does not recognize the CD.

  I went to the properties of the drive through Device Manager and saw the following message is displayed:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  Click Troubleshoot to start the troubleshooter for this device. »

  Following the instruction of the troubleshooter, I tried to update my driver through
  Device Manager, but it tells me that the current driver is the more up-to-date version.
  In the properties of the drive, I found that my driver version is: 5.1.2535.0

  What is a simple problem that has a solution?
  I don't see other actions to find the root of the problem.

  Thank you

  I hope this article can help you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm
  Check it out!

• Portege R500 - DVD player does not work

  Hello
  I love my laptop Portege I bought this month of September. The only thing is that the DVD player is not working for some time.
  -When I put a DVD or CD, I realize I can't freely turn the disc in the drive while it is still open. Strange, but I don't see anything blocking the rotation of the disk.
  -The system does not recognize at all have a DVD player. Initially, it worked, I can't say exactly when it went wrong. I checked with Toshiba Assist: in the information panel, it shows no info on the DVD player, in diagnostic Panel, I have the opportunity to check the DVD but when the test system is just jump the operation all the time, indicating that the Player cannot be found.
  -In the control panel I don't see no more among the hardvers
  -For starting, the DVD is one last thing to check in my BIOS settings. But in fact when the start-up the laptop I can hear the sound of the reader looking for something inside, turning or trying to rotate the disc, but it seems always becomes stuck and starting takes like 5-7 minutes due to lengthy trials, get the DVD player work in vain.
  -Now even when I put the energy setting to oriented perf, I no longer hear the system would look for DVD (setting the player gets off everything when using not saving)

  Someone from Toshiba support could help me? Is it possible to check this problem with the remote connection to my laptop, or something? Or should I take it to the service? With this, I also have a little challenge: I bought my laptop in Hungary, but now I stay in Japan throughout the year. So I would need a station in Tokyo where they accept my European warranty. Could you please provide me with any help or ideas? If possible, direct mail also. Thanks in advance!

  > Could someone support for Toshiba to help me?
  To do this, you will need to get in touch with the Toshiba ASP in your country.
  Here in the forum you can get suggestions form common users because it s a user forum to ;)

  > Is it possible to check this problem with the remote connection to my laptop, or something?
  I doubt that this is possible since this could be a hardware problem

  > Or should I take it to the service?
  Maybe this would be the best

  > I need a station in Tokyo where they accept my European warranty. Could you please provide me with any help or ideas? If possible by direct mail also
  On the page of Toshiba Europe, I was able to find an info on TOSHIBA EMEA LIMITED WARRANTY for NOTEBOOKS.
  This warranty is applicable only in the EMEA region (Europe, Middle East and Africa) and can be executed in any
  Countries the EMEA where Toshiba or its Service providers allowed offers warranty service terms and conditions provided for in the present
  warranty. This warranty covers the costs of service parts and labor needed to restore your system to full operational status.

  As you can see in the Japan is not covered by the EMEA region :( So I doubt that the warranty will cover the costs to the Japan.

• Tecra M4 - DVD player does not recognize discs in Vista

  Hello

  After the installation of Vista my dvd player does not recognize discs!
  No update XP! It was a clean install of Vista.

  I found several links on the upper filter and lower registry entries this entry does not exist in my registry under the CDROM class.

  I tried the XP disk it works fine and recognizes all.
  Drivers are installed correctly no problem in Device Manager is invited.

  So I have no idea how to run it, seems to be a Vista problem

  Could someone help me? I am really frustrated to this topic

  Thanks for your help

  Maybe this helps:

  -Remove the drive from Device Manager CD/DVD.
  -Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -Reboot the laptop

  But what happens exactly? Which disks are not recognized?

• Satellite P25-S520 - DVD player does not work properly

  Difficulty of DVD player or buy the external drive

  My DVD player does not work properly, in fact it can never work properly. Recently, I tried to back up my PC on a DVD using Norton 360. Norton did not recognize that the DVD was present. Then I tried to write a text file on a DVD and was a failure. DVD + R and DVD-R media were found to be (Maxwell 16 X).

  I could have probably lived with this however, I received a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my laptop nearby and it was recognized.

  An attempt to update the driver has also fails.

  I was able to copy a CD of music last night so that at least works properly.

  Does anyone know how can I fix? The important part is to be able to load my new program.

  Research on some forums I found that other people have had problems with the Pioneer drive. If the drive can't be fixed, I'm not adverse to buying an external DVD drive. Unfortunately, where I live there is no brick and mortar stores selling external drives and I prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can someone suggest an external USB drive that will read and write CD and DVD and is certain to be compatible with my Toshiba?

  Thanks for any help,
  Humbaba3000BC

  Satellite P25-S520
  PIONEER DVD - RW DVR-K12D
  Driver provider: Microsoft
  Driver date: 01/07/2001
  Driver version: 5.1.2535.0
  Digital signer: Microsoft Windows Publisher

  Any external USB CD/DVD drive will be compatible with your laptop.

  However, you won't be able to boot from CD (run recovery for example) If you are using an external drive.

  So, your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and request a quote.

• Frontlines: Fuel of War will not work 'E:\. Application not found"when gameplay disc is inserted

  Frontlines: Fuel of War will not work. The installation went well but when I try to run it, the game never starts. I received a message to update, but the game has not officially begun. So one by one, I tried to run the game after each update and still nothing. Everything is up-to-date drivers, windows updates, all my other games work great (for example Guild Wars, Halo PC, ijji Gunz etc.). I don't get an error message after trying to start the game however when I put the game disc in i get "E:\Application not found". I've never had a problem on XP and I have not tried officially on Vista. How can I get this game to work?

  Hello

  you have the original version (DVD) of the game?

  If there are also other programs to install on record as Microsofts vcredist, please intall all too.
  Another option would be: copy the DVD on hard drive you one that launch the game again. If skip you the DVD-check.

  Concerning

• CD and DVD player will not open or read

  My USB does not open. I got the message no program associated with the file.

  I reformated the by the advice of Verbatum USB flash drive.  Now the Flash Player works fine, BUT no optical drive will not work.  I can insert a disc into the CD or DVD drive, and it won't play.

  I can click on one of the icons for the drives in my computer and they do not open or play.

  I need help to solve this problem.

  I have Windows XP Home Edition and running IE 8 with all the updates of Windows and IE.

  Help please.

  You can try AutoPlay Repair Wizard from Microsoft here:

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=c680a7b6-e8fa-45C4-A171-1b389cfacdad

  Download the tool... click Next and select cd/dvd drive and try to open it and such.  Then click on begin Test, and you might find an answer to your problem.

  ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

  I suggest this one below

  Even better...

  http://support.Microsoft.com/GP/cd_dvd_drive_problems is Microsoft Fix it... It will run a diagnostic tool on your 'question' click on this link and it will take you just

  What it fixes...
  • Your CD or DVD drive does not read or write and is shown as disabled
  • The media in your CD or DVD drive cannot be read
  • The media cannot be written for your CD or DVD drive
  • You receive one of the following errors:
    • A specific class or a specific device driver is missing or damaged
    • A CD or DVD drive is not found or is not connected
    • The CD or DVD drive is faced with a problem which does not work properly
    • The CD or DVD drive is not accessible via a drive letter assigned
  How it works...
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then

  

  Automatically solves the problems that it encounters, and

  Offers additional resources if the problem is not resolved

• Dell Dock exe "application not found" error after cleaning malware virus and fix registry problems

  Hey guys!, I had a problem with malware. (In particular this Vista Internet Security * who seems to knock everyone). I fixed this problem as well as the issue with the thing of my Microsoft Security (which sets the windows Defender) and then I went through and fixed my registry problems who came later as some aftereffect of the virus. (Phew!) Now that it is finally all done I click on my dock dell to go to internet explore and BAM! "Application not found" in an area which the header indicates dell dock.exe. Now I just got through my fixing registry problems so that I have all my .exe programs can open without a problem. All other issues are resolved except this! What's wrong?! Please, someone help. (I can get Internet explore any other way, but it's not my PC and I don't want the owner to think I broke it) PS Can't do system restore I would lose my updates which are very necessary can't do a registry fix because I already did and I don't want to mess with it again is not sure if reinstall dell dock should solve the problem I just install IE9 and all my other icons in dell dock work very well

  Hello

  the Dell Dock is nothing to do with the Vista software; It is software installed by Dell

  If the information below correct it, re-download the Dell Dock or contact Dell

  http://www.DellDock.com/

  Dell support

  http://support.Dell.com/

  or ask in the Forums of Dell Support

  http://en.community.Dell.com/support-forums/default.aspx

  Make sure that all of the malware is gone

  This name of Malware VISTA INTERNET SECURITY 2011, etc. is but one of many that will this 'family' of malware under

  Windows XP rogue name	Name of Rogue Windows Vista	Windows 7 Rogue name
  XP Antispyware	Vista Antispyware	Win 7 Antispyware
  XP Antispyware 2011	Vista Antispyware 2011	Win 7 Antispyware 2011
  XP security	Vista security	Win 7 Security
  XP security 2011	Vista Security 2011	Win 7 Security 2011
  XP Internet Security	Vista Internet Security	Win 7 Internet Security
  XP Internet Security 2011	Vista Internet Security 2011	Win 7 Internet Security 2011
  XP Antimalware	Vista Antimalware	Win 7 Antimalware
  XP Antimalware 2011	Vista Antimalware 2011	Win 7 Antimalware 2011
  Keep XP	Vista guard	Custody of Win 7

  Follow the exact deletion on the link below

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-AntiSpyware-2011

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• My dvd player does not read CD

  Whenever I put in a CD, nothing appears and sometimes it say application not found.

  Whenever I put in a CD, nothing appears and sometimes it say application not found.

  See if these applications Microsoft Suppot difficulty it will help.

  Crive of your CD or DVD cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  The CD drive or the DVD drive does not work as expected
  http://support.Microsoft.com/kb/929461 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• SD - MMC shows G:\ application not found.

  Hello, I am experiencing problem with card reader Realtek PCIE is SDHC (SD - MMC) slot. When I enter a SD - MMC card, a window pops up and it says not found application G:\. I use windows 7 Professional. My PC has 3 USB connectors. All the slots work for USB but for microSD USB card reader only 1 location works and the other two said 'F:\ or G:\ application not found '.  To fix this, I read somewhere that it will Autoplay > mixed content > non-action > Save will and I did the same thing and now all three notches work (working days) for the card reader. Now my problem is that the SD - MMC slot appears G:\ application not found. So I can't open the microSD through it. I use Avast! 2014 Antivirus and AVG tune up utility optimizer 2014. Please suggest me a way to this problem!

  Hello Priyankush,

  Thanks for posting your query in Microsoft Community Forum.

  According to your description, I understand that your system USB connectors were not working earlier but that they are busy after that you have troubleshooted the Autoplay issue. However, now slot SD - MMC on your system does not work with the same error message. To do this, I would like to know some information as described below.

  1. What is the serial number and model your system?
  2. Your SD - MMC slot ever worked before? If YES, you did important equipment or modifications to the software on the computer before this problem?
  3. Any other SD card isn't available or is it not detected by the slot with success?

  The question may arise because of the corrupt card reader drivers that can be updated in Device Manager. So, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try to run the next fixit and check if the problem persists.

  Hardware devices do not work or are not detected in Windows

  Method 2:

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of devices, search for the name of the built-in SD - MMC card player.
  3. If the device is not detected in Device Manager, and check if this is a hidden feature.

  I. click Show hidden devices on the view.

  II. expand all winks in Device Manager.

  III. there would be grey entries in Device Manager.

  Uninstall all entries shaded under all winks, and then restart the computer. Insert the SD card into the slot and check if it works.

  Method 3:

  Install the latest drivers from the manufacturer's Web site and even ensure that the driver is compatible with the version of the operating system installed on your computer. Check if it works.

  Consult the following link:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• On Qosmio G20 DVD player does not work

  On my laptop dvd player does not work perfectly.
  I can watch DVDs and CDs, but I can't burn CDs or DVDs at all.

  This laptop is a former view model and think that when I bought the store I bought it since deleted most of the information

  Help, please

  Thank you

  Hello

  There are two possible reasons why you are not able to copy anything to the CD or DVD.

  First, it may be possible that the drives used are not entirely compatible.
  In such cases, it s always advisable to test different CD and DVD from different manufacturers.

  Secondly, the issue could be related to a defective laser lens; in many cases, this can happen because of a physical constraint. If the laser lens can not calibrate in a good position, then the player will not be able to handle the inserted discs.
  This could be the worst case, because this issue is not repairable. Just a STRANGE replacement could help.