DVD player does not recognize blank DVDs.

Similar Questions

• my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

  my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

  This might help: http://support.microsoft.com/gp/cd_dvd_drive_problems

• Satellite Pro M76E - CD player does not recognize blank CD D:\ is not accessible

  Hello.

  Just recently, my satellite pro m76e ceased to recognize blank CDs. If I stick a CD it recognizes that it is a CD, but if I click, it throws an error message indicating that "D:\ is not accessible. Incorrect function. "I tried the search for driver updates but couldn't find one, and toshiba sites says you don't need additional drivers for the internal CD drives.

  The drive works fine for everything else. It's just empty CD. Any advice would be welcome.

  See you soon. Dan

  Hello

  One question; Why you want to read a blank CD? ?:|
  As you say all the CD and DVD is recognized, but only the blank CD cannot be read.

  Regarding the driversa? ... you're right, the update of the driver is not necessary and is not possible because the Windows operating system uses a clean Microsoft drivers to run the ODD.

  But have you already checked these threads?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24203&MessageID=88868
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24238

  There are a few proposals of solution that helped solve a similar a? D:\ is not accessible. Incorrect FunctionA? problems with the CD/DVD drive.

• Satellite L300D - SP5001 mast * one player does not recognize blank CDs

  Hi all

  System Specs:
  * Model: * L300D-SP5001
  * OS: * Windows Vista Ultimate 32 bit
  * Memory *: 4 GB
  * Processor *: AMD X 2 64-bit 1.9 Ghz

  (I know Im wasting resources with the 32-bit windows)

  * Problem: *.
  Blank CD is not identified by the system, which means it always says that there is no disc inside.

  * Framework. *
  Drive inside is writable (empty) and have tried with many different brands.
  The DVD-ROM is a carpet * a UJ-850 s is recognized (classified fine in Device Manager), says OS driver is up to date and original discs are played fine.

  * Question: *.
  What could I do to be able to burn CDs? except to get a more reliable brand and replace the drive...

  Thank you!

  Hmm
  You can try to remove the drive from the Device Manager list CD/DVD. Then you can access the registry and could remove the
  UpperFilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally, you can use 3rd party software like Nero to burn for example.
  I use this tool and I convinced m

• CD player does not recognize blank cd in the drive in win xp.

  my cd drive will read a cd but not recognixe a blank cd

  Hi Edmund,

  I suggest you to run the fixit mentioned in the following Microsoft Link.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  If the problem persists, try the following, then check.

  1. click on Start , then click RUN.

  2. type REGEDIT.exe in the command prompt and then run, and then press ENTER.

  3. Locate and click the following registry key.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  4. in the component right, if you have UpperFilters, right-click UpperFiltersand then click Remove.

  5. click on Yes to confirm the deletion of the UpperFilters registry entry.

  6. in the right pane, if you LowerFilters, click LowerFilters, and then click Remove.

  7. click on Yes to confirm the deletion of the LowerFilters registry entry.

  8. exit the registry editor and then restart the computer.

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Hope this information is useful.

• Tecra M4 - DVD player does not recognize discs in Vista

  Hello

  After the installation of Vista my dvd player does not recognize discs!
  No update XP! It was a clean install of Vista.

  I found several links on the upper filter and lower registry entries this entry does not exist in my registry under the CDROM class.

  I tried the XP disk it works fine and recognizes all.
  Drivers are installed correctly no problem in Device Manager is invited.

  So I have no idea how to run it, seems to be a Vista problem

  Could someone help me? I am really frustrated to this topic

  Thanks for your help

  Maybe this helps:

  -Remove the drive from Device Manager CD/DVD.
  -Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -Reboot the laptop

  But what happens exactly? Which disks are not recognized?

• DVD burner does not recognize blank dvd inserted

  DVD burner does not recognize blank dvd inserted into the pc

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Player does not recognize that the CD or DVD is loaded

  A player does not recognize that there is a disc inserted - when I try to use, it ejects and ask valid.  I tried several CD and DVD with the same answer.  I downloaded the BIOS and readers say that it works correctly.
  Can you help me please?

  Sounds like the drive has failed.  You can try to clean with a CD/DVD audio standard disk cleanup, but if it fails, then the reader should probably be replaced.

  "RoboTriumph" wrote in the new message: * e-mail address is removed from the privacy... *

  A player does not recognize that there is a disc inserted - when I try to use, it ejects and ask valid.  I tried several CD and DVD with the same answer.  I downloaded the BIOS and readers say that it works correctly.
  Can you help me please?

• Windows media player does not recognize my hard drive

  Windows media player

  Why Windows media player does not recognize my hard drive

  Hello

  1 are there any changes or updates made on the computer?

  2. do you get an error message? If Yes, what is the full and exact error message?

  I suggest to see the links and check if it helps:

  The problems of the CDs or DVDs

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-CDs-or-DVDs

• Windows Media Player does not recognize the new downloaded songs

  I have a Pavilion a4310f Prod Nr: race AY014AA-ABA, Win 7 Home Premium 64-bit.

  I just found out that Windows Media Player does not recognize the songs, I recently downloaded from Wal-Mart music download Site.  The songs can be seen in the music library in a folder called 'Downloads' and I can open each song and he will play when double-clicked.  The problem is that I can't create a playlist containing the new songs and burn a copy of the reading list, because the songs are not listed in the Media Library Player any hot it is sorted (artist, Album, Genre, etc.).

  Any help/suggestions would be greatly appreciated.

  Mitch

  Problem solved!

  Went to: start == > Control Panel == > troubleshooting == > view all == > and ran troubleshooting on the library and the settings of WMP.

  Convenience store detected library corrupt and "in media files appear in the WMP library.  Then ran convenience store on WMP settings which reset OMP to default settings.  After that, everything worked as announced.

  Thanks to Big_Dave for putting me on the right track.

• Windows Media Player does not recognize the iPod touch.

  Windows media player does not recognize my ipod touch to sync

  Open WMP in the taskbar from top, find "Tools", scroll down to options.

  in the new window, locate the Hardware tab, add hardware.

• Windows Media Player does not recognize my Archos 5 internet tablet

  Original title: windows media player

  All of a sudden my windows media player does not recognize my Archos 5 internet tablet when I plug in the USB connection cable. I have the media player 11 and this is what is recommended. I do everything according to the book and he just keeps telling me to connect a device.

  Hello

  ·         Is the device is detected in windows Explorer (start > my computer)?

  ·         You are able to see the device in the Device Manager?

  ·         What happens when you try to connect to the device? You get the error message?

  ·         Did you try the device on another computer or another USB port and check if it works?

  ·         Remember to make changes on the computer before the show?

  I suggest you follow these methods and see if it helps:

  Method 1:

  I suggest you to uninstall and reinstall Windows Media Player 11 and check if it helps.

  http://www.Microsoft.com/download/en/details.aspx?ID=8163

   

  See: installation and removal of the drive

  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme

   

  Method 2:

   

  If the device is not detected in Device Manager, or if you find any yellow exclamation try to uninstall it restarts the computer and check if that helps.

   

  How to configure devices by using Device Manager in Windows XP

  http://support.Microsoft.com/kb/307970

   

   

  Method 3:

  Also run the Microsoft Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

   

   

  You can also check out the link below:

  http://www.ARCHOS.com/support/support_tech/FAQs/en/faq_Archos5.html?country=us&lang=en

• Windows Media Player does not recognize the device (iphone)

  I'm trying to download music from Windows Media Player on my iphone. I can get the files in the synchronization section but the Media Player does not recognize my device or seem to have a way to connect. Can anyone help?

  You will need to install iTunes. The iTunes Setup program adds drivers and services for the iPhone. That's what I do:

  1. Once iTunes is installed, it allows to import all the music in Windows Media Player.
  2. If you want to automatically download album art, you will need to register for an iTunes Store account. Otherwise, just copy the album art from Windows Media Player:
  a. at a command prompt, cd in each music folder.
  b. attrib s h AlbumArt * Large.jpg
  c. xcopy AlbumArt * %tmp% Large.jpg
  d. attrib + s + h AlbumArt * Large.jpg
  e e.. now, for each album in iTunes, right click and choose 'Get Info'. Drag & drop the corresponding JPG of %tmp% in the field "Cover Art" and click OK.
  3. connect your iPhone. Select "Manually manage music" on the screen of the iPhone.
  4. click on the icon on the left side of iTunes music. Make sure that all the music that you want to synchronize has an audit. (This is the default).
  5 Select and drag it to the icon of the iPhone.

• S5-1060 casing dvd player does not recognize the Bluray disks after you restore windows 7

  I have a s5-1060 casing with a HP DH12E3LH bluray player, recently the computer was so I took out the restore disks and just do a fresh install of windows 7, it works fine now, BUT the only thing I can't understand is why my bluray in unity player not to see, recognize or play blurays now.

  The Device Manager shows the best drivers are already installed (21/06/2006 microsoft 6.1.7601.17514 driver), and he will play CD, DVD, just does not recognize a bluray disc.  I might say, we watched top of 25-30 movies on it so I 'hope' is not burned or something altogether.

  It indicates that the device is working properly in Device Manager he calls it a cdrom drive (not sure if it matters), but with a bluray in the drive, it shows under properties / status / no media in the drive.

  I'm not really sure where to start on this, drivers seem strange to be so old, is it a firmware I can update if so where can I get that info, I went to the hp site let it detect the computer saw the driver updated but nothing which was directly related to the cdrom drive.

  Thanks for any help on this just stumped at this point, as it was working before the full restoration to the computer using the recovery disks, then there must be something simple.

  Hello FTLOSM,.

  I understand that after making your computer your Blu - ray discs won't play in Windows 7. I'm you provide a document from HP support: solve the DVD and Blu-ray movie problems (Windows 7) that will guide you through the troubleshooting steps to resolve this problem. I would focus on the topic impossible to watch movies in Blu-ray 3D. I am also you provide the link to the Drivers of HP Pavilion Slimline s5-1060 desktop PC page.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Media player does not recognize my cd/dvd burner

  I use Media Player 11.0 on XP SP3.  The tab device recognizes my cd/dvd burner, but when I select the Recorder tab, it says: connect a burner and restart the player.  Any ideas why the burner tab does not recognize the burner?

  Mike. T.

  Hi Mike,.

  (1) don't you make changes to the Windows Media Player settings prior to this problem?
  2) are able to burn CD/DVD with your CD/DVD-ROM?

  Follow the steps in the link here and check for the issue.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Write to us if you are still experiencing a problem. We will help you.